It's Absolutely right. There is one mistake instead of DVC i have mentioned DCV over there by default. The least Count of the Digital Vernier Caliper is 0.01 (10 Microns) is right.
This is the initial stage for quality professional....here you gain a lot of knowledge and practical experience. After some time you will be promoted to Quality Inspector then Quality Engineer afterwards you can also become Quality Head at any organisation based on your knowledge and experiences. Abhi Mai aapko yahi suggest karunga ki jitne din ki bhi training hai app achhe se kaam karo. Sikho, chizo ko samjho, mehnat karo. Then you can switch to a desired job. Good Luck 👍✅
This is helpful for Quality Perspective, but you need learn more about properties of Oil & Gas. You have to basic understanding of : 1. Fluid Mechanics 2. Piping System 3. Safety 🛟 4. Environment Consideration 5. Exploration and Production Process in O&G 6. Knowledge about Tool/Equipment/Machinery used in Oil & Gas Industry. etc .
I will upload it on telegram channel at 9 PM where you can download the pdf notes for Interview Questions for Production Engineer. Please join our telegram channel. Link is given in Video discription and on Channel page as well for more updates and pdf notes.
What Types Video you want on Engineering Drawing ? I have already uploaded 2 Videos related to Engg. Drawing. 1. How to Read Mechanical Drawing 2. Point to Keep in While Dimensioning of Drawing. Tell me Which type of video you want ?
Manual tester and automation tester are software jobs which comes under Quality assurance engineer While quality control engineer is a hardware job which aims at assesing production process and testing their quality and generating reports
*In thread : A tolerance grade (6H7H) refers to 6H for the pitch dia and 7H for the minor dia. *There are 7S used in quality control: The Lean 7s Methodology application consists of seven stages, sort and discard, set in order, deep cleaning and Shine, Standardise, Sustain, Safety and Spirit (team spirit). * There is also 7 QC Tools used in quality control. Stratification. Histogram. Check sheet (tally sheet) Cause and effect diagram (fishbone or Ishikawa diagram) Pareto chart (80-20 rule) Scatter diagram. Control chart
It's Datum* not Detum friends, Just missed.
Very nice aap bhut achha se smjhaya hai
Thanks Buddy 🙏
Knowledgeable video sir 🎉
So nice of you
17:16 is right????? DVC least count is right??????
It's Absolutely right. There is one mistake instead of DVC i have mentioned DCV over there by default. The least Count of the Digital Vernier Caliper is 0.01 (10 Microns) is right.
Very good I'm impressed 👍👍👍👍
More informative video Please explore everyone
Thanks, Buddy !
Super
Dear sir Thank you so much
Good Luck 🤞
Drawing kaise read kre ispe video bnaye
I have already made one video on this. Go and watch. Many more will come soon.
Helplful videos
Thanks for the compliment, don't forget to share & subscribe 🙏
Best video ever.sir
Thank you so much for your knowledge sharing
Great
Thank you very so much sir for very helpfull for Quality engineer for preparing interview..
Best of luck...
Nice
Well explained sir......
Thanks.
Bhut achhe explain kiye Speed or sabhi topics or samjhane ke tarike bhi bhut achha yani all or good
Thanks a lot...
It's very good sir ❤
Bevel Protector least count is 5 minutes??
Yes.
Bahot acha sir gi🎉and thnk u🙏
Good
Informative
Thanks Buddy..!
Excellent sir
Good video
Nice & informative video
Thanks a lot sir
Very good
Good information sir
Very informative Video Bro
Bahut khub
Sahi samjhaya🎉
Excellent
Thankyou..!
Thank you Sir 🙏
Good teaching
Thanks, Just trying to deliver my best.
Thanks sir....
Nice sir g
1 Year ka training me aya me meri job rol
Assembly Se pahle Final Visual inspection karna isme career ha kya
This is the initial stage for quality professional....here you gain a lot of knowledge and practical experience. After some time you will be promoted to Quality Inspector then Quality Engineer afterwards you can also become Quality Head at any organisation based on your knowledge and experiences.
Abhi Mai aapko yahi suggest karunga ki jitne din ki bhi training hai app achhe se kaam karo. Sikho, chizo ko samjho, mehnat karo.
Then you can switch to a desired job. Good Luck 👍✅
Is this this for qc also or not
Yes.
@EngineersSpace If I prepare myself on these questions can get position in oil and gas company?
This is helpful for Quality Perspective, but you need learn more about properties of Oil & Gas.
You have to basic understanding of :
1. Fluid Mechanics
2. Piping System
3. Safety 🛟
4. Environment Consideration
5. Exploration and Production Process in O&G
6. Knowledge about Tool/Equipment/Machinery used in Oil & Gas Industry. etc .
@@EngineersSpace thank you for your precious response.
Thanks
Sir production engineer ke interview ke liye all questions pdf
I will upload it on telegram channel at 9 PM where you can download the pdf notes for Interview Questions for Production Engineer.
Please join our telegram channel. Link is given in Video discription and on Channel page as well for more updates and pdf notes.
I have have uploaded it. Go and check-out by this link -t.me/+UulaHAex-XOkYKgX
Nhi
Bhai aap jao machino plastic limited mai turnt ho jayega without interview 18000 salary
Please quality line inspector interview questions pdf please shear me sir🙏
Please check the telegram channel i have already shared all the PDFs. Link 🔗 is given in the description.
Okay thankyou so much valuable information 🙏🙏🙏🙏
Ow good
Thanks sir
❤❤
Very good sir
Harding aur plating pe video banaiye sir
Excellent 👌 sir
Assembly se pahle Mechanical Engineering
Financial visual inspection Good / Bad
Please reply Every one Industry Knowledge Parson
Please make sure your question is correct ?
What do you want to ask ?
1 Year ka training me aya me meri job rol
Assembly Se pahle Final Visual inspection karna isme career ha kya@@EngineersSpace
Sir engineering drawing pe v ek badhiya video bna dijiye please
What Types Video you want on Engineering Drawing ?
I have already uploaded 2 Videos related to Engg. Drawing.
1. How to Read Mechanical Drawing
2. Point to Keep in While Dimensioning of Drawing.
Tell me Which type of video you want ?
@@EngineersSpace sir projection me view me basic se bataiye
@@EngineersSpacesir quality engineer banane ke liye mechanical se b.tack krna padega ya kisi aur me plz reply
I have done diploma in mechanical engineering, how to become qc supervisor please tell me?
Thank u sir
Your Most Welcome...!
Ye iti walo se bhi Etna puchha jata hai kya
Yes.
If you watch this three videos based on "Interview Questions for Quality Engineers" then you will definitely crack the interview. It's my believe 💯.
Qa engineer aur manual tester same hota h ya alag
Aap Kya puchhna chahte ho ?
Please make clear your question. Then i will definitely answer it.
Manual tester and automation tester are software jobs which comes under Quality assurance engineer
While quality control engineer is a hardware job which aims at assesing production process and testing their quality and generating reports
Thanku sir
Your most welcome !
Supar
Dear sir I thought waste is TIMWOOD
Yes dear, TIMWOOD is the acronym of 7 types of wastage in the industry.
Sir please provide the Pdf
Maine sare PDF telegram channel par upload kar Diya aap wha se download kar sakte ho. Telegram channel ka link video me hai. Thanks 🙏
Please share and subscribe our channel & don't follow us on social media.
please provide pdf link
Please check the telegram channel.
G Sir
More information
By
And quality inspector interview more videos
Pdf available sir
Just Uploaded the PDF of Interview Questions for Quality Engineers.
You can download by the below telegram channel link: t.me/+UulaHAex-XOkYKgX
Thanks sir 🙏
Bhai phle datum ki spelling correct kar
OK
Sir Please share PDF of this video...
Join the telegram channel given in the video discription i will send PDF of this video after 9 PM tonight.
What is 7h or 7H ye kahi interview me puchha gya tha
*In thread : A tolerance grade (6H7H) refers to 6H for the pitch dia and 7H for the minor dia.
*There are 7S used in quality control:
The Lean 7s Methodology application consists of seven stages, sort and discard, set in order, deep cleaning and Shine, Standardise, Sustain, Safety and Spirit (team spirit).
* There is also 7 QC Tools used in quality control.
Stratification.
Histogram.
Check sheet (tally sheet)
Cause and effect diagram (fishbone or Ishikawa diagram)
Pareto chart (80-20 rule)
Scatter diagram.
Control chart
Kya ye question fresher ke liye b pooche jate h???
Yes.
No . Any for Educational question
Gyaan mt diya krr sidhe point pe aooo
GD & T ka full form Galt h😂😂
Go & Check yourself. It's Correct 💯
Ing nhi lgna
Good video
Good
Very nice
Tx sir
Very nice
Nice video
Good