Interview Questions For Quality Engineers.
ฝัง
- เผยแพร่เมื่อ 12 เม.ย. 2024
- Q1:-Name of measuring instruments you know?
Q2:-What is least count ?
Q3:-What are 5s ?
Q4:- On which principle MM & VC works & uses?
Q5:- What is quality?
Q6:- Definition of quality?
Q7:- Who is the father of quality?
Q8:- What is reliability?
Q9:- What is quality control?
Q10:- What is quality assurance?
Q11:- What is Poka-Yoke & types?
Q12:- What is Kanban?
Q13:- What is Capa(corrective & preventive action)?
Q14:-What is kaizen?
Q15:-Father/developer of kaizen?
Q16:-What are IATF core tools with current edition ?
Q17:- What is APQP?
Q18: Phases of APQP?
Q19:- What is PPAP?
Q20:- Submission level of PPAP?
Q21:- How many documents requirement in PPAP?
Q22:- what is MSA?
Q23:- Types of MSA?
Q24:- Purpose of MSA?
Q25:- Principle of SPC?
Q26:- Acceptance criteria of Cp & Cpk?
Q27:- Acceptance criteria of Repeatability & Reproducibility(r &r)?
Q28:- What is Miss Rate & False Alarm?
Q29:- Cp is depend to Cpk or not?
Q30:- Cpk is depend to Cp or not?
Q31:- Formula of Cp & Cpk?
Q32:- What value should be of Cp & Cpk at 6σ ?
Q33:- What is FMEA(failure mode effect analysis) ?
Q34:- What is RPN?
Q35:- In RPN which ranking should have in reverse order ?
Q36:- When we modify RPN.
Q37:- Can we severity change ?
Q38:- What are 7 qc tools?
Q39:- Founder of 7 qc tools?
Q40:- Why we need the 7 qc tools?
Q41:- On which principle Pareto work?
Q42:-What is continuous improvement?
Q43:-What is continual improvement?
Q44:- What is ppm & how to calculated?
Q45:- How to handle customer complaint?
Q46:- What are 7 wastes?
Q47:- What are value added activity?
Q48:- What are non value added activity?
Q49:- Meaning of PQCSDM?
Q50:- What is variation?
Q51:- Types of variation?
Q52:- Types of control plans.
Q53:-What are QC department activities ?
Q54:-What are QA department activities ?
Q55:- What are 3M?
Q56:- What is dock audit?
Q57:-What is calibration?
Q58:-What is objective of calibration ?
Q59:-What is 8d ?
Q60:-What is the customer ?
Q61:-What is CTQ (critical to quality) ?
Q62:-Which tools used to monitor CTQ ?
Q63:- What are problem solving tools?
Q64:-What is 6 sigma?
Q65:-What are 6 sigma methodology?
Q66:- What is difference between defect & defective?
Q67:- What is difference between rework & repair?
Q68:-What is difference between QC & QA ?
Q69:-What is the difference b/w verification & validation ?
Q70:- What is the difference b/w efficiency & effectiveness ?
Q71: What is SMED ?
Q72: Who is the father of SMED ?
Q73: What is changeover ?
Q74: What is changeover time ?
Q75: What is OEE ?
Q76: Who is developer of OEE ?
Q77: What is the formula of OEE ?
Q78: What is the world class OEE ?
Q79:-What is PDCA cycle ?
Q80:-Which angle used in India & why?
Q81:-Why are the 2nd & 4th angle not used in ED.
This is the master video for Quality Engineers 💯
Yes dear, thanks for your valuable comment.
Kya mast video banayi hai sir ji. Namaskar, ye video dekhkar mujhe bahut achi job mil gayi hai. Aapko sat sat naman. Plz make more Video on common interview questions for all.
Thanks dear for comment.
Sir maja aa gya
Mere 98% question clear the
Thanks dear for comment.
Okay
Really very good video
Thanks dear for comment.
amazing video sir ji, Salute for this fantestic video.
Thanks dear for comment.
Very helpful video
Thanks dear for comment.
I was searching for good Interview Questions.. Thank-you Creator 😊
Thanks dear for comment.
Sir, Plz make more video and upload on regular basis.
Thanks dear for comment. Okay dear, I will definitely upload more video on regular basis.
Great Sharing for job searcher. Thanks
Thanks dear for comment.
Wonderful video all questions in one video.
Thanks dear for comment.
Shandaar Dhamakedar video.
Thanks
Kya video banayi hai Sir ji.maja aa gaya.
Thanks dear for comment.
Wow kya video banayi hai sir ji, maja aa gaya, bahut log dua degain aap ko. Ye to confirm hai es video ko dekhne ke baad, bahut logo ki naukri lagne wali hai....thanks guru g, also make common interview questions video guru ji.
Thanks dear for comment. I will definitely upload video soon.
Nice video and helpful video
Thanks dear for comment and make continuity for watching further videos.
Excellent video.
Thanks for comment.
Amazing video.
Thanks dear for comment.
Very nice sir
Thanks dear for comment.
Good share
Thanks dear for comment.
Great video
Thanks dear for comment and watching continuously all videos.
We need this.... thank u sir
Thanks dear for comment.
Waw amezing
Eski PDF format bhi available Kara dijiye sir
Thanks dear for comment. Okay I will share.
Very good sir
Thanks dear for comment. Make continuity for watching continuously this channel.
Thank you
Thanks dear for comment.
👌👌 pdf send kro sir
Okay dear
Very nice sir
Thanks dear for comment.