Make my own EtherCAT device. 9 About time. Step generator.
ฝัง
- เผยแพร่เมื่อ 10 เม.ย. 2024
- After months of work I finally come up with a nicely working step generator.
Git repository github.com/MetalMusings/MyOwn...
Branch Video9 - วิทยาศาสตร์และเทคโนโลยี
Great work mate, those hybrid steppers sound pretty nice, was interesting that you clicked on to the noise of "a poor tune" and solved it! I didn't realize that the stm32 have such a low clock rate, I heard you say that you had tried different crystals which I must say Is seriously under the bonnet. From my cheap seat have you looked into ESP32 by Espressif, they have an adjustable clock rate between 80-240Mhz and as you may already know incorporate wireless. I imagine there are other variables which will make for a good or bad motion controller like onboard cache, but that is getting above my pay grade. Respect your work and thanks for the upload
I am gearing up to make a cnc mill using ethercat drivers. Examples I've seen are using velocity command instead of position in LCNC.
I guess that way the drives don't accelerate and decelerate to each position but rather small changes in velocity.
I don't know much about this stuff just to be sure and I and very impressed by what you've done so far.
Really appreciate your work, for a while I keep thinking on controlling my lathe with ethercat, its just that beckhoff seemed a bit too expensive for experimenting and I was not sure how stable the ethercat master is
very nice , but can we add 4 encoders for the 4 stepgens?