Bro you are legit dealing with this issue the same day I was trying to do mine. Thanks for the upload. Helped getting the valve off. I ended up cleaning that vacuum tube with a bunch of pipe cleaner. Thanks again man.
I did mine yesterday on a 2015 IS250. The good thing is, in Australia, the break booster is on the left side of the engine and what is has instead is the battery. Removing the battery gave me lots of room to work on. It normally is very difficult to loosen so I added anti seize on the new one for easy future removal.
Sorry for the late response, I haven’t really be active on YT lately but Tighten it til it’s tight but don’t over tighten if that makes sense. And you don’t need to change the hose
you should look in to the RR racing intake tube. it eliminates the vent return and uses an extra filter to vent to the engine atmosphere instead of returning to the intake
Mine is also AWD and I don’t think you should have any problems going low just don’t go too low where your destroying your car lol. Going low on any car would stress the suspension system, but later on I would advise to invest in some adjustable rear camber arms, fronts are adjustable from factory. And if you’re going to get wheels make sure your OD (outer diameter) is very similar, try to stay within 25”, otherwise you’ll mess your AWD drivetrain.
If you straight up slam the car then yeah you would run into issues with a good amount of vibrations. If you drop the car enough where it’s functional but low then no you will not have any issues
Chris Kheluram yea I’m not slamming it lol I’m just guna get rid of the wheel gap this car is my daily but thanks bro for the tips I appreciate it and stay safe out there
Bro you are legit dealing with this issue the same day I was trying to do mine. Thanks for the upload. Helped getting the valve off. I ended up cleaning that vacuum tube with a bunch of pipe cleaner. Thanks again man.
No problem man! Here to help 💪🏽
I did mine yesterday on a 2015 IS250. The good thing is, in Australia, the break booster is on the left side of the engine and what is has instead is the battery. Removing the battery gave me lots of room to work on. It normally is very difficult to loosen so I added anti seize on the new one for easy future removal.
Hey man, thanks for making this video. Anything else to know about performing this? Do you need to change the hose? How much do you tighten it?
Sorry for the late response, I haven’t really be active on YT lately but Tighten it til it’s tight but don’t over tighten if that makes sense. And you don’t need to change the hose
you should look in to the RR racing intake tube. it eliminates the vent return and uses an extra filter to vent to the engine atmosphere instead of returning to the intake
Already done 💪🏽
Can you clean that hose with throttle body cleaner?
Signs of bad pcv valve ?
Hello. Please could it be the reason My engine consumes oil because I hear whistling and hustling noise while on speed.
It truly is a pain in the ass to remove! I did mine about a year ago and it desperately needed to be done!!
😂😂 you would think something so small would be easy too
How many miles do you have the valve didn’t look bad . I need to change mine.
It wasn’t that bad tbh but i was getting a shit ton of oil in my intake
Did mine few days ago and whoever thought that placement was a good idea needs to be fired.
Lmao for real 🤣
Is your car awd cuz I have a 17 300 FSport and I just picked some coils for it I wanted to know how low should I go before I run into awd problems
Mine is also AWD and I don’t think you should have any problems going low just don’t go too low where your destroying your car lol. Going low on any car would stress the suspension system, but later on I would advise to invest in some adjustable rear camber arms, fronts are adjustable from factory. And if you’re going to get wheels make sure your OD (outer diameter) is very similar, try to stay within 25”, otherwise you’ll mess your AWD drivetrain.
Chris Kheluram so lowering it shouldn’t mess with the awd and how much are the rear camber arms
If you straight up slam the car then yeah you would run into issues with a good amount of vibrations. If you drop the car enough where it’s functional but low then no you will not have any issues
Chris Kheluram yea I’m not slamming it lol I’m just guna get rid of the wheel gap this car is my daily but thanks bro for the tips I appreciate it and stay safe out there
👍🏽👍🏽👍🏽
I'm still looking for the yellow ring 😂
Me too 😂
Change the Pcv valve and install an oil catch can
I will eventually 🤟🏽
Oh myyyy 🤤🤤
Lol thanks homie definitely wasn’t the funnest Things to do
I just changed mine and got codes after
To rich after
Buy some hose clamps and clamp the hoses dude and make sure the lines are installed correctly
@@ChrisKheluram will do I’ll keep you posted !
I definitely would like to know the fix 🙌🏽
@@ChrisKheluram I removed the top part to get to the pcv valve I unscrewed the 2 bolts
#lexus_society