Sound Deadening The Kei Truck (Daihatsu HiJet Build EP3)
ฝัง
- เผยแพร่เมื่อ 17 ต.ค. 2024
- In this video we drastically change the ride quality in the hijet, i took it on a few spins around the block after and the cabin is much quieter after the sound deadening i might go back and clean up some more area but it was 100% worth it! Radio next along with some more upgrades!
Noico Sound Deadening
amzn.to/2Bu26VB
Deadener Application Rolling Wheel Roller
amzn.to/30NqU3x
Interior Trim Remover
amzn.to/2ZXLP4E
Subscribe here! ►► / waybeforethefame
Instagram ► / waybeforethefame
TikTok ► / waybeforethefame
Twitter ► / itswbtf
Facebook ► / waybeforethefame
SHOP 24/7 ► www.WayBeforeT...
Get Your Own MiniTruck, Tell Them WayBeforeTheFame Sent You
BOEKI USA ►minitrucksdeal...
BEATS BY ► Jayobeatz
/ jayobeatz_
Good first round. Do the doors and the roof (under the headliner). It’ll also make a noticeable difference.
Yeah for sure, Looking back I would do the doors but headliner is a lot of work to redo.
I like your floor cleaning technique. Last time I had to do this job, I taped plastic over most of the dash, drove a few blocks to the coin-op carwash with a wrench, took the seats out and pressure washed the interior. I honestly think you got better results with car wash fluid and a scrub brush.
Appreciate that man, i was pretty happy with the results
Do yourself a favor, separate the seat from the engine covers and use sound deadening sheet before reassembling. You’ll see a big difference.
If you want to put the sound dampening under the seats but not in the engine compartment, the seat can be separated from the base plate by 4 bolts, hope this helps.
I bought a mini truck too about three months ago, bought the deadener a few weeks back and can't wait to put it on, I've been busy as hell with university and running my business, but I've soo far done a deep clean, put my company vinyls on it, and repaired the paint ( I lucked out finding a light blue jumbo cab.) I'm also looking to fix my radio, repaint my rims, re carpet the floor to get rid of the cheap vinyl, re upulster the ripped seats (maybe using versa/Paseo foam as it fits the seat rails of the jumbo,) and figure out what the hell some after market 3 way switch does (plugged in the first blank button left of the steering wheel.) The more I do the more I wanna do.
Cant wait to see the build! sounds sick
My 1996 4WD Hijet should ship from Japan soon. I'm removing the floor mats and I'm going to use Monstaliner bed liner to paint the entire truck, inside and out. It's a very tough rubbery polyurethane finish and does a pretty good job of sound deadening. The headliner is missing, so the gray Monstaliner will make it look a lot better (in a durable off road fashion) while also protecting the truck and deadening the sound, although putting 25 inch all terrain tires on it will generate a lot more road noise so maybe I'll break even.
Awesome, still waiting for my Suzuki carry to be delivered this week. Cant wait to work on it!
Niceeeeee
Love these types of videos man
thanks bro, about to start working on my kei truck some more this week
@@Waybeforethefame Deadass pressing me to buy one! I can’t find any dealers in MI tho :/
I also noticed with my truck the roof lets most of the noise in i just ordered sound deadener for it
Returning the love... KEEP GRINDING 💯
Put that gold foil on the engine side of the panels under your seats. It will help with the heat of the engine bay. Then do the sound deadening under the seats
Good job! Thanks for mentioning our material! May we ask for your permission to thare this footage for our customers and tag you?
It’s all yours! I just purchased the red 315 mil for my kei van going to see if it can help with the heat on my floorboard
@@Waybeforethefame A huge thanks to you! We're really appreciate it! Yes, apply Noico Red over Noico 80 mil without cracks or gaps. This will help.
Don’t say OCD. That implies a negative trait. Maybe you are just a perfectionist.
Use some dynomat extreme heat for engines under the seats! It will cut the noise and down on the heat!
Keep it up man looking great!!
Appreciate it! Cant wait to continue the build
Why don’t you just paint the bottom of the seats with the bed liner, I’m sure it will help with the sound and most likely won’t melt off , ? Just a thought 🤙🤙
I know you did this only 3 weeks ago, but how is the sound deadening holding up? Coming up, or coming off?
Ive been basically daily driving the truck and its made a HUGE difference. not coming off at all, i kinda want to do the doors and roof but i plan on selling the truck in less than a year so its not worth the headache but i would 10/10 recommend
@@Waybeforethefame Sell it?! I get it, but its a dope truck and it cant cost much to maintain, id keep it lol thanks for the info
@@PrestomaticFPV yeah i know but after owning it for a lil while, i would like to get one with AC and a 5speed if possible. But who knows maybe ill keep lol
I had problem with running of engine,after putting sound deadening under the seats.Might be better to put on top side of seat base.
Looks good but would have used the carpet dynomat!
Nice upload!!
DDG sent me, just watched the whole vid to help yo watch time 💪🏽lets get this bag together
Yoo if you want a 5speed with AC go for a subaru sambar i got one a few months ago and its super sick
ive been looking at sambars, there sickkkk
even w/o speakers, it will make a big difference doing the doors
your 100% right, im just lazy lol
People use the term OCD wrong so often it diminishes peoples actual suffering.
If you were a sufferer of OCD, just your socket set being untidy would be enough to set off extreme anxiety and panic.
Gripe aside, nice job on the deadening and bedliner.
are you gonna put carpet ontop of the exposed sound insulation?
i put the oem carpet back over it, still made a huge difference
@@Waybeforethefame that's cool. The truck looked great by the end of the weekend 👌
Instead of doing the bottom , why not pull the seats off the pan and putting the sound deadening between the two
Also the radio I’d going to be tough as the stock radio is only about 2”s deep and there’s no room in the dash for anything to go farther in . You will need a mechless tuner as they are only thin enough for it fit . Also you’ll need to open up the bezel to handle the single DIN as the slot has just the opening for the 2 stems and the tuner window
Yeah i was thinking about splitting the seats, i just put the sound deadening on the bottom today. and dam i know the radio was small but 2inch lol
Heat shield it.
Zooted!💯 Just subbed Lets grow
How do I get one of these? I've wanted one for a long time.
the truck or the sound deadening ?
@@Waybeforethefame truck
Probably both
@@felixrodriguezjr.3941 i got mine at minitrucksdealer.com
Take the driver seat out then put on the sound deadening.
You don't want to mess with the window winder???
🤣🤣🤣🤣🤣
A piece of rag down the side and they pop straight off. Wow dude....wow.
too much work bro lol
I will just use a good blue tooth speaker and my phone instead of changing the stereo.
Yeah that’s what I end up using the 1 OEM speaker on the car isn’t loud enough.
My mini s100 is governed it only runs25 mph
Have you had any issue of the road speed being very low 25 mph hi jet s 100
25mph is too slow I couldn’t do that