Not that sure that keeping it up ensures a quick growth... Have a look at this most credible explanation of youtube algorithms, YES! algorithm is almost all despite what the common sense predicts. th-cam.com/video/fHsa9DqmId8/w-d-xo.html By the way NIkodem, I wish you'll get close to his achievement as a youtube reviewer...
you should really build the MPCNC, i think you would have great fun with it. would be nice to see them compared. just finished mine and i'm kinda blown away what you can do with it :)
Overkill is underrated my friend! Great vid! I appreciate the extra effort for the stop motion. Might I suggest the CA Glue/tape solution for holding down a workpiece? Once I started using this, I have never gone back. (Then the piece wont pop out near the end of the contour cut as well. Either way, thanks for the video!
to save even more money, assuming your surface is conductive and supposedly flat, you can connect one pin to the bit and one to the workpiece. also if you don't want to spend money, instead of using a hard probe level and placing a sheet of metallic film (aluminium or tin foil) on the workpiece and connecting a crocodile clip to it.
Use chemical tinner (no not thinner as in the stuff you use to dilute some types of paint but tinner without the H). This is a special chemical liquid that will allow you tin the copper so it is still conductive but will not oxidate. Getting it however is a little hard, it is quite easy to find in the US but here in Europe you will have to search quite a bit. All you do is just dunk it in the liquid and the you will see the copper turn silver/white. Or you could use an electrolysis method to do it if you can't find the liquid. If you don't the copper will oxidate and ... well it might not make good contact.
Not as hard, as you think - there's SENO 3211. It's cheap and not that hard to get from online electronics shops. But yeah, it's indeed a very good idea to tin the plate!
I'm totally building one of these this summer. I have an older Anet A8 that I don't use anymore, so I'm going to rob as many parts from that as possible.
Hello, first of all, I wish you success, health teacher, I also made a dramel cnc, but sometimes there is a twitch in the y-axis, but I checked the axes manually, there is no problem, it may cause other stepper motor current settings I made 060 power supply 10 amps, there may be another reason, my teacher regards
Superb project, i was very impressed about these project and i am also going to do like this but i want little bit bigger. So please give me the measurements for those things if i want workspace 12x12 inches for pcb prototyping. And make more videos for pcb prototyping with this machine. And i want know how much filament it consumed to print those 3d printed parts?
Looks a bit light weight to br properly flat on the material right ? 🤔 The connector is a nice addition to be able to make more type of probe. Think about mesh probing for making pcb with flatcam or bcnc, that would be great !
I don't know if you know this but Chilipeppr has a auto leveling feature where it probes a user specified grid and auto scales the z movement to mach the warped area on the conductive material I usually mill pcbs with 0.5 mm cutting bit and havent had a broken bit ever since I started using chilipeppr if you dont want to use it as a gcode sender you can import auto leveled gcode.
I know chilipeppr, I wanted to use it to mill PCBs on this machine the problem is that I use KiCAD for PCB design and there is no way to mill boards designed with KiCAD. Maybe just to showcase PCB milling I will get back to Eagle for a moment.
VERY INTERESTING ! I am asking if there is a possibility to install the autolevelling ( or height map ) extention on the CNCjs program ? Is there a simple step by step procedure to follow for a PC running win_10 OS please ? Thanks
It needs weight. I've used PCBs before, and the problem is they are too light and like to float over your stock material. I ended up 3D printing my own, made it hollow, filled it with a steel weight and epoxied a PCB on top, after nickel plating over the copper ( that's the other issue with copper, it tarnishes easily)......I am set up to do all of this easily though were some people wont be.
Hello and sincere congratulations for your excellent work. It is not clear to me the electrical connection of the probe on arduino and if it is necessary to connect some cable to the motor of the Z axis. Would you be kind enough to explain it? Thanks a lot and congratulations again!
Great Video Brother, i am planning to Make one, but i am confused, is it necessary to make that smaller part in touch plate? Can't i use 1 single piece circular, if i make Circle is it necessary to make smaller circle inside it?
did you already tried to cut some carbonplates on your cnc? is it solid and stable enough for cutting such hard materials? because i want something that can handle carbon cutting to make my own quadcopter frames
if you can cutting wood, you can cut carbon sheet too, or aluminium or plastic or bone. only need ewery material test first what is good speed and feed .
think of it this way, the circuit current/signal travels from the SCL port goes to the small circle part on the pcb, there it goes into the alligator clip through the bit and back to the bigger circle on the same pcb and run through the ground wire completing the circuit.
GND go arduino GND to allicator clip, this video only GND go to little point at PCB and then wire go to allicator clip, and SCL wire go to arduino SCL to PCB big copper plate, little copper point have GND wire and continue go to allicator clip.
Yes, depending on the nozzle (brass nozzles are conductive). But wiring them up and configuring them in the controller and software is a little more tricky.
I wouldn't attach it to your hotend for obvious reasons, but if you 3D print a bracket that holds a metal pin (like the drill bit in this video) next to your hotend, this method would work just fine for your 3D printer
Halo Saya indonesia, saya sering melihat vidio anda. Saya sangat awam dengan cnc, tapi saya beranikan untuk membuatnya. Saya pakai arduino, tb6560, dan cncjs. Bisakah membantu bagaimana cara merubah $100=..... ., $101=.....$102 =..... Terima kasih atas bantuannya.
Just use feeler gauge or a slip gauge block and thats it, ultimate accuracy also cheap. So why make make it complicated also I don't think the thickness of pcb would be even.
why do you throw stuff on the table in disgusting ways, why do you hit objects on the table as if it were garbage, can't you explain things with grace and kindness? stop the urge to see these videos
![[TUTO] How to make electronic of homemade CNC](http://i.ytimg.com/vi/QQt1ZcaJhSE/mqdefault.jpg)
woah u realy went ham with the stop motion
looks great
if u keep this up u will surely grow quickly
Thanks! it took me 4 hours to make this 50 second animation but I think it's worth it! I really enjoy making those :)
Not that sure that keeping it up ensures a quick growth... Have a look at this most credible explanation of youtube algorithms, YES! algorithm is almost all despite what the common sense predicts. th-cam.com/video/fHsa9DqmId8/w-d-xo.html By the way NIkodem, I wish you'll get close to his achievement as a youtube reviewer...
@@joetke its not related video rather its ad, don't visit above link
Nice addition! No more playing with paper shims! Impressive, as always, Nikodem!
Thank you!
you should really build the MPCNC, i think you would have great fun with it. would be nice to see them compared. just finished mine and i'm kinda blown away what you can do with it :)
The TH-cam Channel that made me buy a CNC mill :) Keep up the good work.
Nice :) Thanks!
Pretty simple and useful. Thank you Nikodem. Once again, a great script and soundtrack ;)
Thanks!
Overkill is underrated my friend! Great vid! I appreciate the extra effort for the stop motion. Might I suggest the CA Glue/tape solution for holding down a workpiece? Once I started using this, I have never gone back. (Then the piece wont pop out near the end of the contour cut as well.
Either way, thanks for the video!
Better and better every video! Thanks Nikodem.
Thanks!
Hi mate can you put laser on cnc router or can you tell have 2 In one both in one machine ? Thanks
to save even more money, assuming your surface is conductive and supposedly flat, you can connect one pin to the bit and one to the workpiece. also if you don't want to spend money, instead of using a hard probe level and placing a sheet of metallic film (aluminium or tin foil) on the workpiece and connecting a crocodile clip to it.
Really nice explanation. Definitely gona build this.
Thank you! Just do it :)
Thanks
Please make more videos about or with the Dremel CNC... Maybe try to cut a PCB! Thank you, your channel is very cool
Nice and simple idea! I think crocodile clip could be connected directly on wire, but it doesn't matter.
Thanks! Yeah it could, but that way it's cleaner and I can use the connector
Nice, would add some strain relief on the cables , because if one comes lose you probably going to destroy a milling-bit.
Use chemical tinner (no not thinner as in the stuff you use to dilute some types of paint but tinner without the H). This is a special chemical liquid that will allow you tin the copper so it is still conductive but will not oxidate. Getting it however is a little hard, it is quite easy to find in the US but here in Europe you will have to search quite a bit. All you do is just dunk it in the liquid and the you will see the copper turn silver/white. Or you could use an electrolysis method to do it if you can't find the liquid.
If you don't the copper will oxidate and ... well it might not make good contact.
Not as hard, as you think - there's SENO 3211. It's cheap and not that hard to get from online electronics shops. But yeah, it's indeed a very good idea to tin the plate!
I'm totally building one of these this summer. I have an older Anet A8 that I don't use anymore, so I'm going to rob as many parts from that as possible.
i has build my anet A8 printing all MPCNC all parts, little bit biggest and strongest cnc than this have.
A great addition. Are you planning to add an interchangeable spindle/laser? This would really take it to anther level.
Best, useful and I got this video at the perfect time because I'm building diy CNC thanks for sharing this idea
Thanks! Check out my other videos about CNC machines, maybe you will get more ideas :)
@@nikodembartnik sure will watch, already saw some videos before
Is it also possible to use it for all axis? for exampe if u want to mill aluminium and connect one cable to the alu plate.
Hello, first of all, I wish you success, health teacher, I also made a dramel cnc, but sometimes there is a twitch in the y-axis, but I checked the axes manually, there is no problem, it may cause other stepper motor current settings I made 060 power supply 10 amps, there may be another reason, my teacher regards
Superb project, i was very impressed about these project and i am also going to do like this but i want little bit bigger. So please give me the measurements for those things if i want workspace 12x12 inches for pcb prototyping. And make more videos for pcb prototyping with this machine. And i want know how much filament it consumed to print those 3d printed parts?
hello, great video on a useful topic, thanks for sharing your skills :) 👍
Looks a bit light weight to br properly flat on the material right ? 🤔
The connector is a nice addition to be able to make more type of probe. Think about mesh probing for making pcb with flatcam or bcnc, that would be great !
I don't know if you know this but Chilipeppr has a auto leveling feature where it probes a user specified grid and auto scales the z movement to mach the warped area on the conductive material I usually mill pcbs with 0.5 mm cutting bit and havent had a broken bit ever since I started using chilipeppr if you dont want to use it as a gcode sender you can import auto leveled gcode.
I know chilipeppr, I wanted to use it to mill PCBs on this machine the problem is that I use KiCAD for PCB design and there is no way to mill boards designed with KiCAD. Maybe just to showcase PCB milling I will get back to Eagle for a moment.
Love the cnc videos.
Make it rectangular and you can use it to probe the X & Y of the workpiece corner to.
Thanks for the information,
Ive just subscribed and hit the bell , thanks again, keep up the good work
I would have used a feeler gauge as the touch pad. It has an accurate measurement and harder that copper.
VERY INTERESTING !
I am asking if there is a possibility to install the autolevelling ( or height map ) extention on the CNCjs program ?
Is there a simple step by step procedure to follow for a PC running win_10 OS please ?
Thanks
Hello ... I am having problems with my cnc that slows down in the middle of work ... what could it be ??
It needs weight. I've used PCBs before, and the problem is they are too light and like to float over your stock material. I ended up 3D printing my own, made it hollow, filled it with a steel weight and epoxied a PCB on top, after nickel plating over the copper ( that's the other issue with copper, it tarnishes easily)......I am set up to do all of this easily though were some people wont be.
Nice and simple.
Slick! Gonna have to add this to mine too...
Just do it!
Typowy polski akcent :)
Hello and sincere congratulations for your excellent work.
It is not clear to me the electrical connection of the probe on arduino and if it is necessary to connect some cable to the motor of the Z axis.
Would you be kind enough to explain it?
Thanks a lot and congratulations again!
Great video. Very useful. Now, do you now which pins i have to use on arduino mega?
Looks good!
I love you man..😁😁 your job actually.....good one
very very good @nikodem
Thanks! :D
good job - but hats the name of the cnc control program?
Great Video Brother, i am planning to Make one, but i am confused, is it necessary to make that smaller part in touch plate? Can't i use 1 single piece circular, if i make Circle is it necessary to make smaller circle inside it?
I'm really impressed by all the projects you're posting, great job! Are you a student at uni by any chance?
Thanks! Not yet, I just finished secondary technical school. I want to study at Silesian University of technology in Gliwice :)
Nice. What CNC control software are you using?
Nikodem ,a gdzie to wpiąć w arduino shield kiedy wszystkie krańcówki są już zajęte?
Is it possible to use a different extension on your files for the people that do not have auto desk?
Nie lepiej poprowadzić GND od razu z przewodu bez potrzeby lutowania?
i can put an another probe on SDA pin ?
Hallo, welche GRBL Software ist das ??????
Hi, I would like you to make a video in reference to the auto level and to some jobs on PCB, it's a great idea, right? Greetings from Mexico!! 🇲🇽🇲🇽
what program are you using
nice work 👍
Thanks!
What software do you use for design to move the machine please
Fusion360, CNCjs
@@nikodembartnik thank you so much
Thank you
Do you have a STL file for the vaccume attachment?
did you already tried to cut some carbonplates on your cnc? is it solid and stable enough for cutting such hard materials? because i want something that can handle carbon cutting to make my own quadcopter frames
if you can cutting wood, you can cut carbon sheet too, or aluminium or plastic or bone. only need ewery material test first what is good speed and feed .
Could i get a clear picture of Wiring Diagram?
2 Wires from SCL and GND goes to Plate
3rd Single Wire goes to Aligator Clip?
think of it this way, the circuit current/signal travels from the SCL port goes to the small circle part on the pcb, there it goes into the alligator clip through the bit and back to the bigger circle on the same pcb and run through the ground wire completing the circuit.
GND go arduino GND to allicator clip, this video only GND go to little point at PCB and then wire go to allicator clip, and SCL wire go to arduino SCL to PCB big copper plate, little copper point have GND wire and continue go to allicator clip.
Thanks for sharing.
How can i not think this before? Thanks!!
What software are you using to send the gcode? It looks like a version of Candle
it's CNCjs :)
How do I configure NC studio software.
and where you connect the z probe on the motherbord on a 1610 cnc?
GND and input pin number xxx what pin you want use and tell this to arduino too.
you should also diy a 3d printer
It's not worth it nowadays, it's just cheaper to buy than build
@@nikodembartnik its fun
Please let me know software you use. Thanks
Fusion 360, CNCjs
Can we make the same thing on 3d printers with metalic printing bed?
Yes you can, but it would be easier to use a solution designed for 3D printers such as a BLTouch or a capacitive sensor.
yes, but if the nozzle have rest of plastic will not detect the bed and can crash.
can you also make end switches on this machine?
Yeah, some people added those, maybe I will add them too one day :)
What software do you use?
Fusion360 and CNCjs
@@nikodembartnik thank you
👏👏👏👏👏👏
witam możesz podać nazwę programu do frezarki? jest dostępny na windows?
Tak, oba są na maca i windowsa, do projektowania Fusion360 a do kontrolowania frezarki CNCjs
That also works with a 3d printer?
Yes, depending on the nozzle (brass nozzles are conductive). But wiring them up and configuring them in the controller and software is a little more tricky.
Hi !! Pretty cool! This Soft what name?
Молодец! :)
Now would this work for 3d printers
sort of, yes, as long as your nozzle doesnt have plastic on it, it would work.
Eu trabalho com uma CNC FR3020!
Does this work for a 3d printer
Thanks
I wouldn't attach it to your hotend for obvious reasons, but if you 3D print a bracket that holds a metal pin (like the drill bit in this video) next to your hotend, this method would work just fine for your 3D printer
Thanks
That is called a copper clad pc board.
How mach
Where are you from man?:)
From Poland :)
sir how to make 3d printed 5 axis cnc machine
can you please make a video on it
Halo Saya indonesia, saya sering melihat vidio anda. Saya sangat awam dengan cnc, tapi saya beranikan untuk membuatnya. Saya pakai arduino, tb6560, dan cncjs. Bisakah membantu bagaimana cara merubah $100=..... ., $101=.....$102 =..... Terima kasih atas bantuannya.
ijin nyimak
@@muhammadsaiful3041 x dan y sudah tinggal z
Copper clad board :)
Daj polskie napisy bo słyszę że rodak 😆
No rodak :) może kiedyś dodam, dużo z tym zabawy
Mówi bardzo łatwym angielskim
Just use feeler gauge or a slip gauge block and thats it, ultimate accuracy also cheap. So why make make it complicated also I don't think the thickness of pcb would be even.
For this purpose, it is precise enough. As I said I wanted to make it easy to use, disconnectable and clean.
your voice xD to much SSSSSSSSSSSs
Animation made me sick
In a positive way?
why do you throw stuff on the table in disgusting ways, why do you hit objects on the table as if it were garbage, can't you explain things with grace and kindness? stop the urge to see these videos