How does the PCIE Gen 4 30cm Cable work with the RTX TITAN PCIE 3.0 Card !? And is it backwards compatible Amazon shows it as such? If there's no response I'll find out 😁
I need a PCIe 4.0 cable to replace the PCIe 3.0 riser card card that comes with the Fractal Design node 202, so it needs to be pretty short. Or if you should make a PCIe 4.0 riser card that's a direct replacement for the one supplied with the node 202 I'd be extremely happy. The only thing I'm worried about by using a cable is that the riser card is also functioning as the card support as you screw in the riser card into the case itself and then you plug in a small extension into the riser card so that it can reach the video card. The riser card that comes with the node 202 is two pieces, the riser card itself and a small extension you plug into the riser card so that it can reach the video cards PCIe connector. So while a cable would work, it wouldn't offer any structure support for the video card.
Sorry for the late reply. We have finally tested Node 202 and found 5cm Straight version fits the best. The 10cm also fits, but if you can't wait for our 5cm which will be launched in December 2020.
I would love to purchase the white 20cm straight version for my newest build which includes a x570 mobo, Ryzen 9 5900x and 3080 white Strix in the Thermaltake Core P3! Any idea when these will become in stock and available? I also emailed support!
The new shipment will be sending out from our factory in the week of Mar-15-2021. You should be able to purchase it a week later on our Amazon store globally. Sorry for the delay.
Looking into putting together a water Cooled Corsair Obsidian 1000d case with a ASUS ROG STRIX RTX 3090 and I'm not sure what length riser cable i would need ?.
I bought this cable and it doesn't work. Tested with Gigabyte X570 I Aorus Pro Wifi and Sapphire RX 5700 XT Pulse. PCIe Gen 3 works fine, but Gen4 System freeze an lags. Sorry, this cable will return to Amazon
Hi Thomas, We're sorry to hear about your experience. It is possible that you have a faulty cable -these things do happen. You can contact us at support@linkup.one if you would like to learn about our PCIE 4.0 testing program. We would be happy to help troubleshoot your issues. We have had a number of testers try various configurations without fail, so this is surprising. Thank you for your patience in the matter.
I getting ready to do a build with a Corsair x570x case and a Coolermaster h500M Case. I will be using a Asus strix x570-e board to do the build. Which cables would you recommend? I can use this in your program and write a review once I build on both. Thanks.
Please consider Asus motherboard to other brands. Asus has the worst performance in terms of Gen 4 tolerance. Many reported cases are all related to Asus motherboards. Anyway, our 20cm right angle version should fit both cases. Here is the link: linkup.one/linkup-ultra-pcie-4-0-x16-riser-cable-rtx3080-x570-b550-rx6800-tested-extreme-high-speed-itx-vertical-gaming-pci-express-gen4-2020-universal-90-degree-socket-20-cm-3-0-gen3-compatible/ For Cooler Master H500M
Do i choice to buy 15cm version for the phanteks vertical mount ( PH-VGPUKT-02 ) in Coolermaster TD500 Mesh with my MSI B550 Tomahawk Mainboard and RTX 3070 OC GPU? or should i go with the 20cm version?
@@LINKUPTechnologies Awesome customerservice, sure enough it got updated to 35$. Still need to double check which riser will be correct for my Evolv Shift X, after that Ill order.
@@Sinr0ne The 25cm for ITX single reversed socket or 20cm double reversed sockets will work for your Evolve Shift X case. We are coming out an 18cm double reversed sockets version which performs better. It will be launched at end of November.
@@LINKUPTechnologies If the shipping is somewhat fast I should probably wait for the 18cm then? I might buy RX 6800 (XT) and not all of those say they support amd gpus.
@@Sinr0ne AMD GPUs are supported for ATX motherboard. The Mini-ITX motherboards have performance issues due to many components were removed to achieve their compact size.
Hi, would it work on older motherboards? I have a z370 sli plus and i7 9700. I'm getting a 3080 and want to future proof for when I change mobo and cpu.
Hello, i have a rog strix helios case. The case has 2 vertical mounting locations and i want to mount my gpu closest to the motherboard. I dont know if maybe the 15cm or 20cm? Do you know what length i will need?
When you'll start providing longest riser cable 60cm. It's drastically important for me to finalize my build: Gigabyte TRX40 Aorus xtreme with RTX3090FE. I can become for you a beta tester:)))
hey just wondering, which version will fit into a Lian Li Cool 2 tempered glass atx case? not sure if the right angle, left angle or straight cable would fit best.
The 25cm Right Angle will fit Lian Li Cool 2 ATX case. Here is the link: linkup.one/linkup-ultra-pcie-4-0-x16-riser-cable-rtx3080-x570-b550-rx5700xt-tested-extreme-high-speed-itx-vertical-gaming-pci-express-gen4-2020-universal-90-degree-socket-25-cm-3-0-gen3-compatible/
Do i have to buy the second version shown in the video for the coolermaster vertical mount v2 in the lian li o11 dynamic? And would the 15cm version be the best option since the coolermaster one is 16,5cm? or should i go with the 20cm version?
20cm Right Angle version best fits Lian Li 011 dynamic with CM V.2 bracket. 15cm may be too short. Here is the link: linkup.one/linkup-ultra-pcie-4-0-x16-riser-cable-rtx3080-x570-b550-rx6800-tested-extreme-high-speed-itx-vertical-gaming-pci-express-gen4-2020-universal-90-degree-socket-20-cm-3-0-gen3-compatible-white/
@@LINKUPTechnologies any news on the testing? The product site already states "RTX3080 tested" but I found nowhere a proof it is really working like it should (PCIe 4.0 16x): linkup.one/pcie-4-0-riser-cables-ultra/
@@r3nt5ch3r2 Here is our video. We've tested on MSI RTX 3080 ever since the card was released on the 17th of Sept. th-cam.com/video/zxvCZWDR_bY/w-d-xo.html&ab_channel=LINKUPTechnologies
currently rebuilding my mini itx pc, using a gen 1 dan a4.sfx case. I'm running a x570-i and going to run a rtx 3080. I'd like to run it on pcie 4.0 .What is the maximum riser length before loss in performance ( I believe after 254mm pci 4.0 doesnt like it)?
Our new Ultra 4.0 for Mini-ITX will be launched in early October. The Dan case is using 25cm cable. You won't see the performance drops in using this riser cable, but you will see performance drops when system get hot. Our current riser cables are not designed for Mini-ITX motherboards which aren't made as good as their ATX versions.
@@LINKUPTechnologies Thank you for getting back. So excluding the info about heat temps . If I'm looking to replace current riser in the dan a4.sfx case, then I should procure the LINKUP - Ultra PCIe 4.0 X16 Riser cable in 25cm? (currently looking at amazon link)
Right Angle (20cm) fits Phanteks P360a. Here is the link: linkup.one/linkup-ultra-pcie-4-0-x16-riser-cable-rtx3080-x570-b550-rx6800-tested-extreme-high-speed-itx-vertical-gaming-pci-express-gen4-2020-universal-90-degree-socket-20-cm-3-0-gen3-compatible/
@@jonesie6147 NZXT 710i case. LINKUP has since suggested a right angle 20cm cable riser. Wish I could buy a CableMod vert mount without their cable now, seems like a waste...
@@TheDanFromOz I have to return the 30cm right angle cable, I accidentally bought it thinking it's what I needed for my thermaltake case, but turns out I needed the straight cable and was able to place an order on Amazon today for the white 20cm straight cable.
Looks like you will need 30cm Right Angle version for the Meshify 2.0XL, but we have never tested on Flex B-20 vertical mount. If you decide to go with it and send us the assembly photos, we will reward you with discount. Here is the link of the right angle version: linkup.one/pcie-4-0-riser-cables-ultra/universal-right-angle/
The 25cm Right Angle version should fit your Corsair 680x. Here is the link: linkup.one/linkup-ultra-pcie-4-0-x16-riser-cable-rtx3080-x570-b550-rx6800-tested-extreme-high-speed-itx-vertical-gaming-pci-express-gen4-2020-universal-90-degree-socket-25-cm-3-0-gen3-compatible/
how do i get on Early Reviewer Program? i need to test and review on my channel. i have Asus B55-F Gaming motherboard and Asus 5600XT VGA. will test on Lianli 011 DXL and they vertical GPU bracket. i'm now still running on pcie 3.0 mode
@@quantumtransfer If you set the top slot to pci e 3.0 it will not affect the m.2 they are not running on the same. You can run a GPU which most of them use 3.0 and a pci e 4.0 m.2 and everything works correctly.
Does it work. Got Rx 5700 xt limited edition saphire rgb. Would be nice to locate it so you can see it better in the case. Also have a rx 5700 xt oc with thermals sorted i would like to crossfire them.
The 20/25cm Straight version best fits Thermaltakes Core P3 case. Here is the link: linkup.one/linkup-pcie-4-0-x16-riser-cable-rtx3080-x570-b550-rx6800-tested-extreme-high-speed-itx-vertical-ultra-gaming-pci-express-gen4-2020-straight-socket-20-cm-3-0-gen3-tt-compatible/
We will have 30cm left angle version that will fit NZXT H1 case here: linkup.one/linkup-pcie-4-0-x16-riser-cable-rtx3080-x570-b550-rx5700xt-tested-twin-axial-itx-vertical-ultra-gaming-pci-express-gen4-2020-left-angle-270-degree-socket-30-cm-nzxt-h1-compatible/
Is the retention clip on the Riser Cable removable? I want to use it with the Cooler Master vertical GPU holder (www.coolermaster.com/catalog/legacy-products/cases/vertical-graphics-card-holder/#Specifications) but it has a metal part on the side which I fear will make this riser unusable with it. Have you perhaps tested it with the Cooler Master's holder?
Hi there, Thank you for your interest in LINKUP products, We have found that cutting the tab that is perpendicular to the base of the CoolerMaster mount allows our riser cables to fit in the mount (you may be able to achieve this by using pliers, bend back and forth to weaken the tab at the bend until it falls off). You can see the image in the Amazon Listing here : www.amazon.com/dp/B07Y4172DM?ref=myi_title_dp&th=1 If you would like more descriptions n how to do this, you can email us at support@linkup.one Thank you, and have a nice day.
@@pseast Thanks for the info. I think I'll try just that. Btw, when will you be available in the EU? The shipping from your site costs as much as the product itself!
@@SapereAude1490 Yes, we have these products in UK, Germany, France, Italy and Spain. Here is the German listing:www.amazon.de/dp/B07Y3Z12TV?ref=myi_title_dp&th=1
We do not sell our products in China. Sorry. There won't be any Aliexpress link. If you see our products sold other than Amazon, Bestbuy, and Neweggs, you may look at the wrong item. However, we do sell our products to some PC case factories. You will soon see our cables in their popular cases.
Thank you for your interest in LINKUP Riser Cables. You can use our 3.0 Premium riser cables found here linkup.one/pcie-3-0-x-16-riser-cables/premium-version/ You can also find them on various Amazon marketplaces such as Amazon US here: www.amazon.com/dp/B07997W7PV?ref=myi_title_dp Please don't hesitate to contact us should you have any more questions. Have a good day!
Can definitely confirm this works... I have a strix x570 e gaming motherboard and a evga ftw3 ultra 3090
How does the PCIE Gen 4 30cm Cable work with the RTX TITAN PCIE 3.0 Card !?
And is it backwards compatible Amazon shows it as such? If there's no response I'll find out 😁
It's fully compatible with Gen 3 and RTX Titan card.
@@LINKUPTechnologies I'm very thankful for the response
I've been getting WHAE reboots with the 3080 and a Phanteks riser cable, I have ordered one of these so hopefully it helps!
Yes. It will resolve all problems you're having with Phanteks Gen 3 riser cable.
which Version will fit for my Phanteks P600s?
Well this didn't work out well for me. My computer acted REALLY odd after enabling PCIE 4.0 even with this gen 4 PCIE cable.
What is your system setup?
I need a PCIe 4.0 cable to replace the PCIe 3.0 riser card card that comes with the Fractal Design node 202, so it needs to be pretty short. Or if you should make a PCIe 4.0 riser card that's a direct replacement for the one supplied with the node 202 I'd be extremely happy.
The only thing I'm worried about by using a cable is that the riser card is also functioning as the card support as you screw in the riser card into the case itself and then you plug in a small extension into the riser card so that it can reach the video card.
The riser card that comes with the node 202 is two pieces, the riser card itself and a small extension you plug into the riser card so that it can reach the video cards PCIe connector. So while a cable would work, it wouldn't offer any structure support for the video card.
Im in same board MadMax2069
@@pseast I just went ahead and bought a 10cm cable, it's a bit too long so it had to be folded, But it works well.
Sorry for the late reply. We have finally tested Node 202 and found 5cm Straight version fits the best. The 10cm also fits, but if you can't wait for our 5cm which will be launched in December 2020.
@@LINKUPTechnologies yeah I bought a 10cm cable like 5 months ago. Just needed to be folded and all is good.
@@madmax2069 Great. We will have 5cm "Straight version" in December. If you can post you build on a video here, you may receive a free riser cable.
I would love to purchase the white 20cm straight version for my newest build which includes a x570 mobo, Ryzen 9 5900x and 3080 white Strix in the Thermaltake Core P3! Any idea when these will become in stock and available? I also emailed support!
The new shipment will be sending out from our factory in the week of Mar-15-2021. You should be able to purchase it a week later on our Amazon store globally. Sorry for the delay.
Looking into putting together a water Cooled Corsair Obsidian 1000d case with a ASUS ROG STRIX RTX 3090 and I'm not sure what length riser cable i would need ?.
I am working with mine now, and i got the 30cm for the gpu to be on top the psu shroud, not sure if you are mounting higher though
The 25cm right angle riser should fit. If you have other PCI devices, the 30cm would work.
Here is the link of 25cm:
www.amazon.com/dp/B08XMZ788Y
I bought this cable and it doesn't work. Tested with Gigabyte X570 I Aorus Pro Wifi and Sapphire RX 5700 XT Pulse. PCIe Gen 3 works fine, but Gen4 System freeze an lags. Sorry, this cable will return to Amazon
Hi Thomas, We're sorry to hear about your experience. It is possible that you have a faulty cable -these things do happen. You can contact us at support@linkup.one if you would like to learn about our PCIE 4.0 testing program. We would be happy to help troubleshoot your issues. We have had a number of testers try various configurations without fail, so this is surprising. Thank you for your patience in the matter.
@@LINKUPTechnologies I have send a mail
I getting ready to do a build with a Corsair x570x case and a Coolermaster h500M Case. I will be using a Asus strix x570-e board to do the build. Which cables would you recommend? I can use this in your program and write a review once I build on both. Thanks.
Please consider Asus motherboard to other brands. Asus has the worst performance in terms of Gen 4 tolerance. Many reported cases are all related to Asus motherboards.
Anyway, our 20cm right angle version should fit both cases. Here is the link:
linkup.one/linkup-ultra-pcie-4-0-x16-riser-cable-rtx3080-x570-b550-rx6800-tested-extreme-high-speed-itx-vertical-gaming-pci-express-gen4-2020-universal-90-degree-socket-20-cm-3-0-gen3-compatible/
For Cooler Master H500M
Do i choice to buy 15cm version for the phanteks vertical mount ( PH-VGPUKT-02 ) in Coolermaster TD500 Mesh with my MSI B550 Tomahawk Mainboard and RTX 3070 OC GPU? or should i go with the 20cm version?
20cm is better for the TD500.
what is the difference ultra extreme?
Do you have a cable that will work in the Phanteks Evolv Shift case?
The left angle version will work for PHanteks Evolv Shift case. We will have the left version by end of September or early October.
I have a Corsair 5000D Airflow with a Gigabyte 3070, which rise would I need to vertical mount?
20cm Right Angle riser cable will fit your 5000D case.
Question about shipping, how can shipping be 134$ to Finland? Would have ordered but that shipping cost is horrible... How can it be
We charge flat rate $35 by DHL from Taiwan to Finland. Please try again and select standard shipping method.
@@LINKUPTechnologies Awesome customerservice, sure enough it got updated to 35$. Still need to double check which riser will be correct for my Evolv Shift X, after that Ill order.
@@Sinr0ne The 25cm for ITX single reversed socket or 20cm double reversed sockets will work for your Evolve Shift X case.
We are coming out an 18cm double reversed sockets version which performs better. It will be launched at end of November.
@@LINKUPTechnologies If the shipping is somewhat fast I should probably wait for the 18cm then? I might buy RX 6800 (XT) and not all of those say they support amd gpus.
@@Sinr0ne AMD GPUs are supported for ATX motherboard. The Mini-ITX motherboards have performance issues due to many components were removed to achieve their compact size.
Hi, would it work on older motherboards? I have a z370 sli plus and i7 9700. I'm getting a 3080 and want to future proof for when I change mobo and cpu.
Definitely.
Hello, i have a rog strix helios case. The case has 2 vertical mounting locations and i want to mount my gpu closest to the motherboard. I dont know if maybe the 15cm or 20cm? Do you know what length i will need?
Use the 20cm one. 15cm may be okay, but 20cm will never go wrong.
When you'll start providing longest riser cable 60cm. It's drastically important for me to finalize my build: Gigabyte TRX40 Aorus xtreme with RTX3090FE. I can become for you a beta tester:)))
We will launch Extreme4+ which goes up to 60cm in May 2021. The delay is due to the supply of raw materials.
How will I know which angle riser cable I need? I have Rog Asus Helios case and 3080
The 20cm right angle riser best fits your ROG Helios case.
@@LINKUPTechnologies thank you so much for the reply
I’m bout to make a purchase which angle is the best for Phanteks evolv X?
Right Angle 20cm best fits Phanteks Evolv X.
hey just wondering, which version will fit into a Lian Li Cool 2 tempered glass atx case? not sure if the right angle, left angle or straight cable would fit best.
The 25cm Right Angle will fit Lian Li Cool 2 ATX case. Here is the link:
linkup.one/linkup-ultra-pcie-4-0-x16-riser-cable-rtx3080-x570-b550-rx5700xt-tested-extreme-high-speed-itx-vertical-gaming-pci-express-gen4-2020-universal-90-degree-socket-25-cm-3-0-gen3-compatible/
Do i have to buy the second version shown in the video for the coolermaster vertical mount v2 in the lian li o11 dynamic? And would the 15cm version be the best option since the coolermaster one is 16,5cm? or should i go with the 20cm version?
20cm Right Angle version best fits Lian Li 011 dynamic with CM V.2 bracket. 15cm may be too short. Here is the link: linkup.one/linkup-ultra-pcie-4-0-x16-riser-cable-rtx3080-x570-b550-rx6800-tested-extreme-high-speed-itx-vertical-gaming-pci-express-gen4-2020-universal-90-degree-socket-20-cm-3-0-gen3-compatible-white/
@@LINKUPTechnologies thank you so much for the respond, i'll make sure to check it out😅
@@LINKUPTechnologies how about Lian Li 011 dynamic XL with CM V.2 Bracket. 20cm , 25cm or 30cm? Thank you!
@@geloguevara4507 25cm will be best fit.
This supports the full bandwidth of PCIe 4 (I'm getting an RTX 3080 or 3090)? Also, is it compatible with the Thermaltake Core P5? Thanks.
Thanks for your interest. You can email us at support@linkup.one to receive information about joining our testing program. Have a nice day!
@@LINKUPTechnologies any news on the testing?
The product site already states "RTX3080 tested" but I found nowhere a proof it is really working like it should (PCIe 4.0 16x):
linkup.one/pcie-4-0-riser-cables-ultra/
@@r3nt5ch3r2 Yes. It works perfectly. Apparently nVidai GPUs are more stable than Radeon. You will see the great result from nVidia.
@@r3nt5ch3r2 Here is our video. We've tested on MSI RTX 3080 ever since the card was released on the 17th of Sept. th-cam.com/video/zxvCZWDR_bY/w-d-xo.html&ab_channel=LINKUPTechnologies
Will it work with rtx 3080
@Thunder Life We will be testing soon.
We will be testing soon.
Yes. We've tested here: th-cam.com/video/zxvCZWDR_bY/w-d-xo.html&ab_channel=LINKUPTechnologies
Ayyyyy, thanks linkup, you are the best
currently rebuilding my mini itx pc, using a gen 1 dan a4.sfx case. I'm running a x570-i and going to run a rtx 3080. I'd like to run it on pcie 4.0 .What is the maximum riser length before loss in performance ( I believe after 254mm pci 4.0 doesnt like it)?
Our new Ultra 4.0 for Mini-ITX will be launched in early October. The Dan case is using 25cm cable. You won't see the performance drops in using this riser cable, but you will see performance drops when system get hot. Our current riser cables are not designed for Mini-ITX motherboards which aren't made as good as their ATX versions.
@@LINKUPTechnologies Thank you for getting back. So excluding the info about heat temps . If I'm looking to replace current riser in the dan a4.sfx case, then I should procure the LINKUP - Ultra PCIe 4.0 X16 Riser cable in 25cm? (currently looking at amazon link)
Hi there,
Which riser cable 4.0 will fit in a Phanteks Enthoo Evolv X D-RGB ATX? Looking to purchase ASAP
25cm Right Angle will fit Phanteks Enthoo Evolv X D-RGB.
@@LINKUPTechnologies thanks for that. Any ETA of when you’ll be restocking?
@@xvshogunvx7652 There is a shipment coming to Amazon.com next week. (Week of Feb-15)
@@LINKUPTechnologies thx mate!
@@xvshogunvx7652 They are on the way to Amazon.
Which angle do you think will fit on a phanteks p360a?
Right Angle (20cm) fits Phanteks P360a.
Here is the link:
linkup.one/linkup-ultra-pcie-4-0-x16-riser-cable-rtx3080-x570-b550-rx6800-tested-extreme-high-speed-itx-vertical-gaming-pci-express-gen4-2020-universal-90-degree-socket-20-cm-3-0-gen3-compatible/
Hi, just wondering which style/length cable would work for a Asus Strix X570 MB and Strix 3080 vertically mounted. Length is my biggest concern...?
It's less about the mobo and gpu and more has to do with the case.
@@jonesie6147 NZXT 710i case. LINKUP has since suggested a right angle 20cm cable riser. Wish I could buy a CableMod vert mount without their cable now, seems like a waste...
@@TheDanFromOz I have to return the 30cm right angle cable, I accidentally bought it thinking it's what I needed for my thermaltake case, but turns out I needed the straight cable and was able to place an order on Amazon today for the white 20cm straight cable.
Fractal Design Meshify 2.0 XL (Flex B-20 GPU vertical mount), can i screw out 3,0 support and replace it with one of your cable?
Looks like you will need 30cm Right Angle version for the Meshify 2.0XL, but we have never tested on Flex B-20 vertical mount. If you decide to go with it and send us the assembly photos, we will reward you with discount. Here is the link of the right angle version:
linkup.one/pcie-4-0-riser-cables-ultra/universal-right-angle/
@@s7r49 Let me know if you need any help. Thanks and keep yourself safe and healthy.
Which model should i purchase for NZXT H1?
Left Angle 30cm. Please do not use the screws on the NZXT H1 case. We will substitute 28cm Left Angle in December 2020. Both works.
Which riser cable is suitable for a CM H500 case, thanks
Is this compatible with the Corsair 1000D case?
The 30cm Right Angle should fit Corsair 1000D case. Here is the link:
linkup.one/pcie-4-0-riser-cables-ultra/universal-right-angle/
which one could i use for corsair 680x and rtx 3080
The 25cm Right Angle version should fit your Corsair 680x.
Here is the link:
linkup.one/linkup-ultra-pcie-4-0-x16-riser-cable-rtx3080-x570-b550-rx6800-tested-extreme-high-speed-itx-vertical-gaming-pci-express-gen4-2020-universal-90-degree-socket-25-cm-3-0-gen3-compatible/
how do i get on Early Reviewer Program? i need to test and review on my channel. i have Asus B55-F Gaming motherboard and Asus 5600XT VGA. will test on Lianli 011 DXL and they vertical GPU bracket. i'm now still running on pcie 3.0 mode
Thanks for visiting. Please email support@LINKUP.one. Have a nice day.
Will it work with an ASUS AM4 TUF GAMING X570-PLUS and a XFX OC THICC III ULTRA AMD RADEON RX 5700 XT?
Yes. It works.
If you set your X570 PCIe to 3.0 in BIOS, will it also affect any Gen 4 M.2 you have onboard?
Yes, it will affect it since it goes by whatever pcie setting is in the bios.
@@quantumtransfer Thanks bro. Good to know.
Just needed to know if the M.2 lanes were independent of the slot lanes. Apparently not.
@@quantumtransfer If you set the top slot to pci e 3.0 it will not affect the m.2 they are not running on the same. You can run a GPU which most of them use 3.0 and a pci e 4.0 m.2 and everything works correctly.
Does it work. Got Rx 5700 xt limited edition saphire rgb. Would be nice to locate it so you can see it better in the case. Also have a rx 5700 xt oc with thermals sorted i would like to crossfire them.
It works perfectly for RX5700xt in ATX form factor motherboards.
Great news. Now. How do I get one. Also where are they available from.
@@dannyreay6072 You can purchase it on our website here: linkup.one/pcie-4-0-riser-cables-ultra/ultra-4-0/
or on Amazon globally.
Which model for use with core p3? Would be happy to buy one. Thank you
The 20/25cm Straight version best fits Thermaltakes Core P3 case.
Here is the link:
linkup.one/linkup-pcie-4-0-x16-riser-cable-rtx3080-x570-b550-rx6800-tested-extreme-high-speed-itx-vertical-ultra-gaming-pci-express-gen4-2020-straight-socket-20-cm-3-0-gen3-tt-compatible/
@@LINKUPTechnologies thank you so much what a crazy quick reply. Customer service at its best.
@@SuperDaddyruss （⌒▽⌒）
Has it been tested with Nvidia RTX 3090? Planning to build it on TT Core P3 too
@@mooncakefreak Yes. Tested with EVGA RTX3090 on Asus, ASRock, Gigabyte, & MSI x570, B550 motherbaords with no performance issue.
Hi.. Any type suggestion for Lian Li Dynamic 011 XL?
25cm right angle best fits Lian Li Dynamic 011 XL.
@@LINKUPTechnologies I bought the Coolermaster V2 for my 3090. Can I use this 25cm or can I also use 30cm? Thanks!
what version fits the coolermaster mount 2?
The "Right Angle" version works for CM V2 mount.
@@LINKUPTechnologies thank you 💖
do you have any 4.0 riser cable that can fit the NZXT H1 case?
We will have 30cm left angle version that will fit NZXT H1 case here: linkup.one/linkup-pcie-4-0-x16-riser-cable-rtx3080-x570-b550-rx5700xt-tested-twin-axial-itx-vertical-ultra-gaming-pci-express-gen4-2020-left-angle-270-degree-socket-30-cm-nzxt-h1-compatible/
LINKUP Technologies where can this be purchased in Europe?
@@larsl6508 We will soon have these available in Amazon Europe including DE, UK, FR, IT, ES, SW, &UK marketplaces.
Is the retention clip on the Riser Cable removable?
I want to use it with the Cooler Master vertical GPU holder (www.coolermaster.com/catalog/legacy-products/cases/vertical-graphics-card-holder/#Specifications) but it has a metal part on the side which I fear will make this riser unusable with it.
Have you perhaps tested it with the Cooler Master's holder?
Hi there,
Thank you for your interest in LINKUP products,
We have found that cutting the tab that is perpendicular to the base of the CoolerMaster mount allows our riser cables to fit in the mount (you may be able to achieve this by using pliers, bend back and forth to weaken the tab at the bend until it falls off).
You can see the image in the Amazon Listing here : www.amazon.com/dp/B07Y4172DM?ref=myi_title_dp&th=1
If you would like more descriptions n how to do this, you can email us at support@linkup.one
Thank you, and have a nice day.
@@pseast Thanks for the info. I think I'll try just that.
Btw, when will you be available in the EU? The shipping from your site costs as much as the product itself!
@@SapereAude1490 Yes, we have these products in UK, Germany, France, Italy and Spain. Here is the German listing:www.amazon.de/dp/B07Y3Z12TV?ref=myi_title_dp&th=1
Where ur alieexpress link?
We do not sell our products in China. Sorry. There won't be any Aliexpress link. If you see our products sold other than Amazon, Bestbuy, and Neweggs, you may look at the wrong item.
However, we do sell our products to some PC case factories. You will soon see our cables in their popular cases.
how about nvidia cards. should work right? im using rtx2080ti
Thank you for your interest in LINKUP Riser Cables. You can use our 3.0 Premium riser cables found here linkup.one/pcie-3-0-x-16-riser-cables/premium-version/
You can also find them on various Amazon marketplaces such as Amazon US here: www.amazon.com/dp/B07997W7PV?ref=myi_title_dp
Please don't hesitate to contact us should you have any more questions. Have a good day!
These 4.0 riser cables should work for your card, but are unnecessary for 3.0 cards, unless you wish to futureproof for 4.0 cards.
The 2080 ti is a PCIe 3.0 card, so a PCIe 4.0 cable is not needed, but it would work, there's no reason why it wouldn't.
@@LINKUPTechnologies if future proof.. my board is a x570 platform.. 3900x cpu.. so i can use the 4.0 riser with my 2080ti? Correct?
@@farhana4809 , correct. You can use a LINKUP Ultra PCIE 4.0 riser cable
no stock but have a discount code on the website haha to funny
Sorry for the shortage. The shipments are on the way to global Amazon markets. You will be able to purchase it within next two weeks.