Ford Crown Victoria Police Interceptor Hits The Dyno!
ฝัง
- เผยแพร่เมื่อ 8 ก.ย. 2024
- How much power will this Ford Crown Victoria Police Interceptor make on the dyno?
We've seen your comments requesting us to dyno a Crown Vic, so here it is! Let us know in the comments what other vehicle you would like to see on the dyno!
Here's the mod/spec list for Eric's 2010 Ford Crown Victoria Police Interceptor:
- Ported throttle body and intake plenum
- Aluminium driveshaft
- Magnaflow cat-back
- 4.10 gears
- 93 Octane tune
- 4r75w automatic transmission
- 275/50r17 Nitto NT555 G2s on a 17x7.5" rear wheel
________________________________________
Watch some of our project Mustangs on the Dyno! Ranging from Coyote Swapped Fox and New Edge to the newest Mustang available!
• LMR Dyno Videos
________________________________________
TH-cam: latemodelres.t...
Facebook: / latemodelresto
Instagram: / latemodelresto
TikTok: / latemodelresto
#LMR #CrownVic #Dyno
________________________________________
Use of this video is subject to the terms as set forth in our LMR Install Video Disclaimer | lmr.com/page/l...
Check out our Texas DPS SSP Mustang Dyno Video!
th-cam.com/video/q4zUEYXOMZc/w-d-xo.html
The 4.6 is easily one of the greatest V8s ever produced
Best sounding small displacement v8.
The reliability alone puts it very high on my list. 300-400k miles doing burnouts.
Probably the greatest! Love em
pretty damn fine engine, just needs more power
Ford hit the nail on the head that's for sure with really both the 2 valves and 4v engines
That Vic is clean love the tires and rims.
I could listen to that V8 all day and never get tired of it 😍
CROWN VIC NATION!!!!!! WOOOOO PROUD OWNER OF A 05 P71 WITH 132K ON IT BRAND NEW SUSPENSION.
That thing is clean af.
Love the crown vics
Wheels and tires look so sweet.
I would love to see the dyno on this Vic prior to the SCT tune to see what difference the tune made.
Wild! I love me CVPI and the only thing I love more than owning one is seeing others love theirs.
Keep on keeping on fellas.
These are very underrated fords.great sleeper cars.
I dont care that they’re slow. They just fucking look amazing and drives so well
You're absolutely right, they're great dailys and they don't do too badly at pulling their weight. Love our cars!
Far from slow
They reward a light touch in corners. Don't upset the suspension and they'll corner like a sports car. As Jackie Stewart said, slow is smooth, smooth is fast.
@@KingCeeestock they are absolutely slow but they can make power very well modular small block Fords can take boost for days
@@StockTurboN20 Slow? I doubt it
The black P71 looks hot. Needs a Coyote swap.
That thing is just gorgeous with those Steelies. Gives it that beefy look 😍😮💨
275’s out back! That man had the wheel widening service done? 😎
Sweet sound
I like the 4.6 in it for highway driving but hell with that just try to coyote swap it .
Agreed. Trying to mess with that engine is like putting lipstick on a pig. Solid engine but not for performance. Coyote swap would be awesome
@@rickhunter6513 you simply don't know what the f*** you're talkin about. With the right parts you can get just over 400 HP naturally aspirated and those engines are great for stroking or boosting. Plus the 4.6 sounds way better than a damn shity coyote.
Boring coyote swap.
@@kskip4242 “with the right parts” you might as well put a better engine in the car. That v8 is a frigging dog. Don’t get all butthurt over it. It’s common knowledge it’s not a good base for a performance engine. Go head and spend all that money just to try and squeeze out a bit more HP😂
@@rickhunter6513 like I said you don't know what you're talkin about. I would rather spend money on an engine that's going to make its power at lower RPM's in a big heavy car not a coyote motor that doesn't make any torque at all until after 4,000 RPM. A stroked, bolted, e85, roots blown and tuned 5.1 mod 2v would fuck your Coyote in its ass. I don't think you realize how expensive it's going to be to do a coyote swap. Not to mention my 4.6 based engine is going to sound tons better than that raspy ass European sounding shity coyote motor.
Not sure what shocked me most. The sound of that thing when you unleashed it, or seeing a young man who doesn't have two full arms of trashy ink. 🤣
Yeah cause tattoos affect the performance sooo much, right?
@@blount99RT Just used to seeing every millennial or Gen Z with full sleeves of tats. Surprised to see somebody unique for once.
@@ermagerd101 I think your confusing gen z for gen x, we don't get full arm tattoos its tacky
I hope LMR could do more parts for panther platform cars
It's actually rated at 297ft.lbs torque. He just mixed up the 9 and 7. Im guessing this was a mistake. 250hp is correct though.
Hey there, loved seeing "Sunshines" trusty, daily driver steed !!! Looks like just a hair more than the expected 10% drive line loss, especially with 4R75W trans.. Would love to see how that thing would respond to a super charger kit and tune..
Keep these kinds of things coming...
Damn....you caught me off guard with the liter of cola reference.
The 4r70/75 isn’t a slush box with the Jmod and a good tune! All my vics chirp 3rd gear
Absolutely gorgeous Vic 💯🙌✌
That Dyno is some piece of equipment and Eric has a bad A$$ ride too. All black, beefy tires, probably the Mustang chin spoiler, the blackout side markers and I notice it has the fog lights. The reason I don't have them on mine is because I could never find someone who would throughly go over the materials and show the instal on assembling the fog lights. I mean I've seen some but not to the satisfactory where I can go do it myself. In fact it sure would be nice if Eric can show what brand, products and materials were used to install the foglight. Where Eric has his place is exactly where I would like for mine to be. That would be a real treat for me. Not asking for Eric to do a complete demonstration; just lift the car, point, show and explain. Hypothetically what he might do differently or why he may use something else vs what he has already. Keep up the vids and Thanks a million!
That's a Bad Boy Victor ,
I love this car like crazy
Such a great platform, can't wait to see some 7.3 low riser intakes swapped vics around...
Someone put a Godzilla in there vic on TH-cam it’s crazy
Even though its only got 198 hp it sounds so much faster lol
198 to the tires. Puts it around 245 to the crank
I've got Crown Vicks too and I always thought that they were the duck's guts but after the dyno run I guess they're closer to chicken fu*%ers.
Of course mine is just an
'Altered State Trooper'🚓💨
Cool car!
Where can we see more of his car? I want to know suspension mods and that chin spoiler. Widened Steelies?
Yeah they are widened steelies. ADTR sells them.
My dream car but I want one with the bull bar with the headlight guards but I’ll take one with just the regular bull bar
My 09 P71 made 222rwhp completely stock a few years ago, with longtubes n open cutouts it made 240rwhp, 83k miles.. Gonna post the video maybe tomorrow, meow..
I had an '07, thing moved pretty good for a big heavy car.
I just bought a Canadian police Interceptor. Holy hell this car is awesome. I'm new to learning about cars, and I think I'm going to beef this car up.
Good Dyno Landon!💯👊🏾 How about getting a Ford Mustang SSP on the Dyno?
Hmmmm... We could make that happen soon😉
That car is sooooo cool!!!!
I have two 09 cvpi there my favorite 😍
Would like to see 1995 ford lightning on the dyno
We got you covered 🤝 Here's the full dyno run on our 1995 Gen 1 Lightning! th-cam.com/video/jWKZalacft4/w-d-xo.html
I would like to know more about the fog lights. Maybe a video on the install, wiring, switches and all that. Please and thank you
03-05 focus foglights
I’m diggin the low stance she got
Was he saying meow
Meow 🐱
Love your build Eric 🤘🏼
Sunshine made sure no one said “ I know what’s wrong with it it don’t got no gas in it” 😂
Bad ass looking vic
Yea, those are ADTR widened steel wheels, stock PI wheels don't hold 275s lol. Looks good tho, mod list is solid so far. Next on his list should be boost, or a Coyote swap
He slipped, the description says they're 17x9 but can't fault a mustang guy for not knowing much about vics. They also list the aluminum driveshaft like its a mod when all police interceptors have it, since 98 the town car(still a steel driveshaft) and police vics have a 5/8" longer tailshaft housing and a unique slightly shorter aluminum driveshaft was made for them.
Dyno day is the greatest day of the week. As far as a list, I would say just put every employees car, that wants to participate, on the dyno!
I’d love to see more of this car particularly on the highway to see what rpm ranges he’s at. Hardly any videos on these cars with 4.10’s and a tune to fix the speedo
I'm not sure they need a tune to fix the speedo.
3rd gen Coyote swap with a 10 speed auto would be an excellent plan.
Alright meow. I almost passed out. That was funny
I like 4.6's but could you imagine if ford stuck with pushrod engines? Imagine getting a crown vic with a modern 351 or "old" 302. G dang that would be sweet just for the torque alone lol
Yes and no. The 4.6 is the stepping stone to one of the greatest v8s ever made. The coyote
I have a northstar in my caddie that runs so good but I also have a 08 mercury grand marquis and honestly I enjoy it more and even though not same horse power the mercury to me is more fun
Nice looking vic for sure...
Interesting that seems a little down on power 52HP is more than I normally see for drivetrain loss
I second the idea of a Coyote swap!
👎 boring. Why would you want to put an engine in it that makes absolutely no low-end torque? Coyotes are all top end. Crown Vic is a heavy car it needs torque. Boost the s*** out of that 4.6 with a root style blower.
I had one of these doing 220klm’s on a shitty road one time. They are tough
A 1990 Ford f150 extended cab with the 300 inline 6 is what I would like to see dynoed
Probably make more torque than this weak car in the clip.
Damn and my 3.8 V6 full bolt-on and tune made 198rwhp and 244rwtq😮!
where did he get fog lights to fit the Crown Vic ?????????????
What is your wheel setup?
Nice car, but I don't get why it only produced 198 horsepower on the dyno if it is rated at 250 from the factory. Why the lower number?
They dyno’d the engine and it produced 250hp and when they put it in the car they kept the engine hp. They didn’t include power train loss. HP gets lost when it has to travel from the front of the car to the back having to spin so many things like the driveshaft and the transmission and then the diff and then the wheels so you lose a lot of hp.
@@2ndgencadi189 I understand all of that, but since 1972 the car manufacturers have been required to publish horsepower ratings taken from the wheels, just as you described it. So, a CVPI from the factory was rated at 250 horsepower at the wheels. The custom car in this video, which has a few, small performance modifications as described should have produced 250 or more horsepower during this dyno run. It did not, so that is why I asked my initial question, why not?
Definately a car that was built more for endurance rather than raw power. A car they were chasing may out run them but will probably fall apart during the chase, while the cv can take them out and drive away.
That 4.6 has way more potential than people give it credit for plus it sounds amazing.
It can definitely make raw power
Since this came on a mercury marauder would be damn cool.
Come on meow, throw a 6.2 Raptor on the rollers. We have one on hand if you ever want it.
Sunshine - that is a sweet Vic.
We have a Gen 1 that we could toss on there 😉
Meow that's a pretty clean ride!
I want this car 🚗 😍
yall going to let the nice cowboy have it once your done... right? Come on, you know a cowboy like me sure would love that car! (I had a Nice 2011 but it was rear ended by a truck doing 50mph and she is in that parking lot in the sky now)
damn i love crown vics i love mines to death but i wish they coulda gave us a bit more power...
God damn she's beautiful 😍
can you guys do a 2011-2017 v6 mustang?
We did one a long time ago, but I can make a new video idea for the team to look into doing another one! For now, here's one of our old takes! th-cam.com/video/pRACWFpEXgM/w-d-xo.html
I'm Curious of the results, could you please dyno a 1980-1981 foxbody with the 255 cubic inch / 4.2L v8
@@turbojetpowered8299 ya it would be different, but you also have to think about it the 2.3 was able to in lmr previous video and it makes about the same amount of power as the 4.2 lol 😆
Great Car , ❤❤
Please do 2001 bullitt
We gotta get our hands on one first 😬
Is that a staggered setup? It looks like the rear wheels have been widened an inch or so.
They are widened stock wheels. 17x9 on a 275/50r17
Mercury Marauder perhaps
Ford galaxie with a BBF
What size tires are on that Crown?
Tough looking CV! Sounds awesome too!
wow those numbers seem disappointing for a car "rated" at 250hp & 300 ft-lb torque. I ought to bring my 2008 & 2010 over and see what they do. I swear my 2008 puts out more than any other Vic I've owned
It’s not “disappointing” at all..that is what they make 🤷♂
That's only about 14 less than the GT mustang. With a simple tune (marty) and more open exhaust it would easily pass that
So is this car exactly how it was when it was a cop car or did he modify it I would like to see what a real cop police package crown Vic made stock from factory for police crown Vic's the mods they did to make them faster for cops and not modded cuse of they made some good power then they make a good budget sleeper base for a build. My 2015 Camaro RS made 296 rear wheel horsepower to rear wheels stock besides a CD air intake and throttle body spacer and a down pipes cuse you can't put headers on the v6s cuse the exhaust manifold is molded into the heads but for a V6 Camaro the RS package is amazingly beautiful interior and exterior has exact same body package as the SS except it has RS in the head rests which was a package to add to the RS was embroidered head rests and embroidered carpet rs floor mats and the glove box had RS stiched into it and paint matched plastic engine cover with RS on it. Has same wheels and tires stock as the SS came with same Cowell induction hood and all it's fast for a V6 car makes more HP to the crank then a V6 lotus does so it's got V6 super car power at a budget price making 390 to the crank when I had the old motor out to replace with a brand new stock V6 motor we dynoed the old one and new one and new one made 390 to crank all stock and the old one made 379 a little HP lose from age but still made more then what GM advertised it at which is cool for insurance reasons but they under sold the horsepower which normaly they over sell the horsepower number by 10-100 HP more then they actually have sometimes but in this case they under sold it I loved my RS Camaro until it got rear ended by a 18 wheeler only had it for a year and a half which sucks I never did any burnouts or hot roded it which now I regret not having fun it cuse i deprived my self of the sports cars fun by running it fast around curvy roads racing at stop lights drifting it and sliding and doing burnouts cuse I didn't wanna tear it up
what size is that wheel that the car has
All information related to the dyno and car can be found in the description. Thanks!
Вот он. Самый быстрый автомобиль в мире
Yesssssssss
94-96 Ford thunderbird v8.
That’s weaker than I thought tbh
Same. I was expecting 220-230whp
This is what they make
Steven Chavez Why if a car has an advertised 250 CRANK hp would you expect 220-230 WHEEL? That makes zero sense
Can y’all do a 1998 2v f150
What shocks are on it? Looked like Bilstein, but supposedly they don't make shocks for those years of Vic's. PLEASE reply!
The rear shocks are in fact Bilstein shocks. Unfortunately, I don't know the details, and since this video was released, Eric sold the car. -Landan
How did he lower his crown vic? There’s not many options and I don’t have the budget for the 800$ coil overs for the front only.
As far as we know, Eric cut the springs to lower it. -Landan
20% drive train loss from 250hp? And it's got a tune? So it's probably more like 25%. I didn't think it would lose that much.
Dyno any year of Ford Thunderbird supercoupe sc 3.8 or v8 1989-1997 5.0 or 4.6. auto or 5 spd 89-95 sc. Or even mercury cougar same setup and years or Lincoln mark 8?
Have youll done anymore with the vic? im looking to do cams in mine
This isn't our car. It's Eric's as mentioned in the video. I'm not sure of the car's whereabouts now. I think he may have sold it. -Landan
Were the rear rims widened?
To my knowledge, no. -Landan
are those aftermarket fender flares and front lip? id love to know what they are
Those are factory "flares". The front bumper has a Mach 1 chin spoiler that's been modified to fit. Link below. -Landan
lmr.com/item/SVE-17626M1/1999-04-Mustang-Mach-1-Style-Chin-Spoiler
275 50 /17 tires on back??
Yes, that's correct. -Landan
When you gonna do a stock gen 2 ⚡?
Also, can we please get some more repo parts made for our trucks 🙏
Looking to do one soon! Don't worry!
How do I find the yellow bulbs inside the headlight
Those are amber side marker bulbs. -Landan
Screw the coyote swap put a root style blower and build that 4.6. The Crown Victoria needs an engine that puts out torque not an engine that revs to 8000 RPM.
1989 ford or mercury grand marquise or crown vic 302 v8
They might not be fast but you can`t make a car any meaner or sinister and when one pulls up behind you, makes your heart beat a little faster.Exciting to drive? No. Cheap pick and pull parts? yes.
Time for yote swap r80 TT if there is any cash left 😄