Thanks for the awesome video. Yours is the quickest disassembly video I have ever seen on UTUBE. I have always been hesitant to disassemble the upper. It’s not as complicated as I previously thought. Thanks again and stay safe out there 🙏.
Very quick and detailed. You dont see videos like this very often anymore. Im having exteacting issues on my p80... how likely is the exteactor to be the issue? Im aware of the one part that people often times swap out. Im just wondering if the extractor could possibly be the issue. It just doesnt seem to kick the shells out.
I’ll say this: if you have a optic cut slide, your problem very well might be that the optic cover screw or optic screw on the extractor side is probably too long and interfering with the extractor rod. You’ll know if this is the case by trying to remove the extractor rod and if does not come out freely then there is interference there from the screw. If it comes out freely then of course make sure it is installed in the correct orientation, spring and bearing should be towards the back of the slide and rod should be up front against the actual extractor. If that’s good then the extractor itself could be the issue.
I made this video for a customer that ordered a slide and was scared to disassemble his oem slide to instal the parts I to the new slide. Sorry to disappoint you lol. Maybe you can make a better video and finally upload something to TH-cam after 14 years?
half the video is over before this genius gets the backplate off! then on reassembly, reinstalling the extractor, he says "round part goes to the back" except he shows no round pat and there is no "rtound part on the back of the extractor!
A video from 3 years ago still helping out people. Thanks for taking your time to make this video!
Thanks for the awesome video. Yours is the quickest disassembly video I have ever seen on UTUBE. I have always been hesitant to disassemble the upper. It’s not as complicated as I previously thought. Thanks again and stay safe out there 🙏.
That makes two of us.
@@punksnotdeaditsconservativ1693that makes 3 of us
Thank you this video was straight forward and I got my new slide on!
Thanks for the video.
Solid set of paws on ya
Thanks for the instructions! Worked like a charm!
Appreciate the video. just got my new optics cut slide and this helped a lot
Quick video very clear and to the point thanks man
Nice job explaining everything. Thank you.
Thanks for the straight forward, to the point, informative video.
Best video by far, I've seen to remove the slide backplate, so I can insert a custom plate.
Hey loved the tutorial helped me fix my pistol and id love to thank you agian brother be safe and god bless
Fast simple to the point, thank you
Great video
You’re a scholar and a gentleman.
Dude you rock! Thank you!!
Good stuff. Thank you!
great vid, thanks
Thx
One of my springs and plunger went flying and I didn't where it went
Very quick and detailed. You dont see videos like this very often anymore. Im having exteacting issues on my p80... how likely is the exteactor to be the issue? Im aware of the one part that people often times swap out. Im just wondering if the extractor could possibly be the issue. It just doesnt seem to kick the shells out.
I’ll say this: if you have a optic cut slide, your problem very well might be that the optic cover screw or optic screw on the extractor side is probably too long and interfering with the extractor rod. You’ll know if this is the case by trying to remove the extractor rod and if does not come out freely then there is interference there from the screw. If it comes out freely then of course make sure it is installed in the correct orientation, spring and bearing should be towards the back of the slide and rod should be up front against the actual extractor. If that’s good then the extractor itself could be the issue.
Exlent 👍
That was a great video bro, I appreciate simple and correct!
No cleaning oil or anything needed?
Much appreciated brother.
Can you do a Glock 19 (preferably gen3) lower frame assembly ?
Coming right up
Very good should those parts be lubricated before putting them back in to the pistol
On the slide I only lubricate the guide rod/recoil spring and the rails that ride on the frame.
Wait, this aint airsoft
Is this gen3 or the same as the gen3?
This is a gen 3 but they are all the same pretty much.
@@AKjose47 thanks man I was able to change out my upk to my new slide no problem thanks to this video👌🏽
I hear Tribal Seeds, your arms are super hairy lol but thanks for the video bro.
Lol thanks for that?
Isn’t that roller skates by steel pulse?
The music, noise in the background is a distraction. ⬇️
POORLY DONE!
I made this video for a customer that ordered a slide and was scared to disassemble his oem slide to instal the parts I to the new slide. Sorry to disappoint you lol. Maybe you can make a better video and finally upload something to TH-cam after 14 years?
half the video is over before this genius gets the backplate off! then on reassembly, reinstalling the extractor, he says "round part goes to the back" except he shows no round pat and there is no "rtound part on the back of the extractor!
Thanks for watching