SpeedCut Nano Kits *Echo 2511T And Stihl 194T*
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2024
- SpeedCut Nano Kits Echo 2511T And Stihl 194T
In this video we will be going over some information about the speedcut nano kits and testing them out in a real work environment. We will be primarily focusing on the 194t and 2511t.
Links from amazon for kits. these are 14 inch bars. there are other sizes on amazon
Echo 2511T Kit
www.amazon.ca/...
Stihl Kit
www.amazon.ca/...
Like
Comment
Subscribe
You can also buy a 7 pin oil pump sprocket for the 2511 when you switch to .325.
Hi I'm struggling to see the link to get the correct kit ordered for the 2511
www.amazon.ca/Oregon-637237-Speedcut-Sprocket-Conversion/dp/B0C2DJ8XR3
The bark box on a 462 is pretty bitchin! Bark box is my favorite mod cause it’s so damn easy! And then it wakes up the neighbors too😂
He'll ya. I love the Bark boxes
My go to saw 462 bark box .oil air filter..3 point doggs ..completely different saw..the filter is best part..opens it
@@Sethhaun78 I have to try the foam on the 462. I got one for the 661 and really like it
@@PoplarMechanic couldn't go back ..they last all week just leave it on blow out around it..I put heavy oil on them ..won't hurt it ..extra might drip off but nothing gets in saw engine..couldn't run those stock ones ever again...I use big zip lock and 2 ounces or so of uni oil from westcoast saw and or fab1 maxima spray ...sometimes after few days it will look like it needs changing but it don't blow out the outside of it and around the electronic carb areas ..then I spray little fab 1 on the outside gets more life out of it in between changing filters I keep 3 filters ready to swap out ..I use the uni foam cleaner as well I soak it with that and dish soap ..I cut everyday they last about week ..you will be STUNNED At what it keeps out ..nothing gets in best filter system on the market 462/400.....I run maxima flow on my 500i 661..but it still gets some in..those 462 filters are spotless underneath..as I said it will look like it's real bad but on the inside its amazing...try the spray on for extra life before filter swaps..blow it then spray it..the deep inside will still be clean. And it's incredible...wish the max flow was as good..
462 is best all around pro chainsaw..for daily arborist work..most underrated..sure 500i is more torque but its made for long bar and big rounds..462 does same body of work with half the gas or more and sounds like real saw..
Ya, the 462 is a real nice saw. I actually got a 24-inch on my 500i. Running 404. I know it's weird, but I really like it. The larger sprocket gives a bit more chain speed.
@@PoplarMechanic yea I run 24 and 32 on both 462/500i...gotta get a 28 more ideal for me..daily.but 24 does most things..light of course..the 500i needs large logs .can't handke the sound..it makes ..it's more torque but 462 is always first pick...for me..get those filters man I'm telling I take care of my saws and guys are crazy to spend 1600 on a saw or more acuttualy and run those filters..when I take my oil ones off can eat dinner off the inside..it's unreal.plus incunjuntion with bark box or egan even better they running way cooler
@@PoplarMechanic just got 2 ported 2511t with egan straight shot from Aaron Lynch thing is absolute animal ..I run big saws all the time in my wood yard at home daily but when I ran those 2511t, s the whole neighborhood got quiet 🤫....😂 lol.lol
great video !!!
@@demetriogranados3879 thanks!
Well that helped seal the deal between the Speed cut and a Panther setup….
👍 thanks for watching 🤙
@@PuskwaskaOutdoors those panther bars are made of chocolate. No disrespect to the guy but he needs to change them.
@@EdtheGardener
Yeah I seen a lot of people complaint about the panther bars…. I went with the Oregon SCN kit, it’s pretty wicked 👍
3 seconds faster🎉
😆
Gotta have that 3 seconds right?
what size file do you sharpen these chains with? Thanks
5/32
Thanks bro!
@nicholaslacroix7722 No worries, brotha! Thanks for watching. I got more cutting action with tomorrow's video if you want to see it cutting some cottonwood. I really like the chain.
That would be rad! I have the conversion in my cart on Amazon.
Привет. Так какой вывод штиль лучше?
All set up to try the 1/4 pitch on 2511 my other one still has .035 p
I think you will like it, Greg. It is pretty good. Thanks for watching, brotha 🤙
I run quarter pitch 0.43 polesaw chain bar stihl...on all 3 of my echo 2511t, s. It gets better notches,smooth and couldn't run 3/8 on them no way..makes no sense..would try that nano because it comes in 16 ...never used panther before ..stihl bar chain much more durable
What size bar are you running on the 194t? 14 or 16inch? Thanks
14
14 brotha
Is your 2511 modified?
Yes! She goes like a raped ape.
Did you modify it or have it done by someone?
@@bamabowhunter8499 someone did this one for me
@PoplarMechanic what exactly was done to it? All I did to mine was replace muffler with eagan performance pipe, added dog spikes and removed cap limiters to adjust carburetor.