Great instruction. I have the exact pump and used a zip ties to secure the hose that goes into the differential. This freed up my hands for the pump and the bottle. Thanks for your video!
cool. be doing my soon. had a friend do my trans. and after seeing how easy it was figured the diff wouldn't be too much different. thanks for the video. subscribed.
Okc Genesis Yea no problem! Thanks for checking out the video! I'll be doing my trans soon enough as well it's not hard at all man save your money buy more performance parts!!😁😁
Jay Genesis sorry for the late response here is what you need to know. Transmission fluid change steps. Type of oil: Gear oil: SAE 75W/85 GL-4 2.1 US qt. 1. Park the vehicle on a flat road and lock the tires. 2. Shift the shift lever to the "P" range. 3. Remove the overflow plug by using a torx wrench. 4. Remove the filler plug by using a torx wrench. 5. Check if ATF flows out of the overflow hole. If ATF does not drop, add ATF until it drops. 6. Fix the overflow plug by using Torx wrench. Reuse the used gasket. 7. Add 1400cc of ATF from the oil filling hole. 8. Install it to the filler plug with a new gasket. 9. Tighten the filler plug by using Torx wrench with the specified torque. Tightening torque : 15~25 Nm (1.5~2.5 kgf.m, 11.1~18.4 lb-ft) 10. Start the engine. 11. Raise ATF temperatirue on CAN signal up to 50°C at stabilized idle speed condition. 12. Shift from "P" to "D", then from "D" to "P", keeping each shift position "N","R" more than 2 seconds with foot braking. 13. Repeat 2 times above procedure "3". 14. Remove the overflow plug and the O-ring by using Torx wrench. 15. Check If the thin oil stream becomes drop by drop when ATF temperatirue on CAN signal is at 58~64°C. 16. Install it to the overflow plug with a new gasket. 17. Tighten the overflow plug by using Torx wrench with the specified torque.
Hey Roxana Franco Sorry for the late response. What year is your car? Some car don’t even require transmission change according to dealership because they have special fluid for life time.
Great instruction. I have the exact pump and used a zip ties to secure the hose that goes into the differential. This freed up my hands for the pump and the bottle. Thanks for your video!
Jim Rowe didn’t think about the zip ties but good call! 👌🏻 I’ll try that next time. But thanks for time to watch and comment.
cool. be doing my soon. had a friend do my trans. and after seeing how easy it was figured the diff wouldn't be too much different. thanks for the video. subscribed.
Okc Genesis Yea no problem! Thanks for checking out the video! I'll be doing my trans soon enough as well it's not hard at all man save your money buy more performance parts!!😁😁
Do you guys know what type of oil you use and the amount for the transmission fluid?
At what mileage do you change the trans oil?
Jay Genesis sorry for the late response here is what you need to know.
Transmission fluid change steps.
Type of oil:
Gear oil: SAE 75W/85 GL-4 2.1 US qt.
1.
Park the vehicle on a flat road and lock the tires.
2.
Shift the shift lever to the "P" range.
3.
Remove the overflow plug by using a torx wrench.
4.
Remove the filler plug by using a torx wrench.
5.
Check if ATF flows out of the overflow hole. If ATF does not drop, add ATF until it drops.
6.
Fix the overflow plug by using Torx wrench.
Reuse the used gasket.
7.
Add 1400cc of ATF from the oil filling hole.
8.
Install it to the filler plug with a new gasket.
9.
Tighten the filler plug by using Torx wrench with the specified torque.
Tightening torque :
15~25 Nm (1.5~2.5 kgf.m, 11.1~18.4 lb-ft)
10.
Start the engine.
11.
Raise ATF temperatirue on CAN signal up to 50°C at stabilized idle speed condition.
12.
Shift from "P" to "D", then from "D" to "P", keeping each shift position "N","R" more than 2 seconds with foot braking.
13.
Repeat 2 times above procedure "3".
14.
Remove the overflow plug and the O-ring by using Torx wrench.
15.
Check If the thin oil stream becomes drop by drop when ATF temperatirue on CAN signal is at 58~64°C.
16.
Install it to the overflow plug with a new gasket.
17.
Tighten the overflow plug by using Torx wrench with the specified torque.
Hey Roxana Franco Sorry for the late response. What year is your car? Some car don’t even require transmission change according to dealership because they have special fluid for life time.
Pumping in new oil before plugging is a good idea. Wish my car (G8) had clear access to the plugs like your Genesis
DavidJLim thanks, it’s a good idea though just to make sure you let out any shavings if you have any. G8 are dope though a lot of power 👌🏼
clean job man
DiokeN89 Thanks I appreciate it
how hard was it to pump. I would have like to see that
Doug Harlow super easy. I got the pump at harbor freight. Just pump the fluid until it over fills from the fill plug
Do you know if its the same amount and same oil for a 2013?
Jay Genesis it should be the same amount. Sorry for the late response