Tip: use a SEALED type battery when mounting it in the cab/trunk. Less chance of spills, less chance of venting flammable vapors. They are just a few bucks more. I use AGM motorcycle batteries in my crx and integra for cheap weight savings. Plenty to crank a high-comp four banger. Nice job. Chassis any floppier? Weigh the pile?
I really hope a cage will be going in the hatch after that, I would really hate for something to happen to you guys in the event of a accident. Cutting the car this way without a cage in very dangerous. You completely change the way the car absorbs a impact and the way the inertia will travel through the vehicle. Also the inner door bar is ultra high strength steel and is there to protect you from a side Impact. Without a cage the car will fold like a coke can. I hope I'm not coming off as a know it all, or someone that is on here to talk sh!*. Love your vids and hope my ef hatch will be as clean as yours.
For some reason on my h22 when my distributor was bad my fuel pump WOULD NOT TURN ON. as soon as I changed my distributor everything worked like a champ
Have to agree with the death trap this thing is now. Not doubting but just hoping you guys have a plan to make up for all the hatching. Stitch weld or a cage minimal
I’m an electronic technician by trade. I wish I lived near you. I love diagnosing wiring issues. The 0.4 volts of potential could be a sign of a short.
I was understanding it this way, that if that fuse was showing .4v on both sides of the fuse spot that there was a break/open fuse or something somewhere near it. So we went through and replaced and made sure ALL fuses in the fuse box were good and the correct amp ones. Replaced the blue/white wire and verified it has good resistance and such. So after that I was at a total loss. I couldn’t find anything broken/wrong under there
There are two plugs on the fuse box on the integra that are the same check out if they are not on the wrong side it hapen to me and fuel pump issue was fixed
Broooo picking up a ef hatch si Monday from work the paperwork will finally be done. Thanks to meth heads that get arrested I always end up with some cool shit from work. I am putting my k swap in it So I’ll be posting all over built not bought And thanks for the content man it really puts my mind in a good place Like you have no idea how much your videos help me mentally.
you need to swiss cheese the lower rear control arms and also swish cheese the tail light housings and honestly cut out the spare tire tub and plate it!
Fuck I still got a bad painfull bump from tile and a grinder same shit. Cutting the circle out of the tile. .for the downspout around the wax ring... . I thinnk that's how I got it... I can't touch it very well. Hurts like crazy .
Dont be too dismissive to an engine ground. I was having the same issue. Mine would prime the fuel pump. But when the key turned to start the car it was cutting the power to the fuel pump. And it wad an engine ground.
Damn i didnt realize you were so close. Ima have to go to a taco tues and say what up! Been hooked on ur channel since u got dooped by shawnee. Love ur channel. Saw u at ifo in the sedan. Im sure u saw my black crx run at least once. Lol
@@deadbeatgarage hell yeah! I so want u to help me see how much more weight i can remove from my crx. I really like how u drill out the door jams. I love that look! That be sick if i could have u do mine!
Damn dude. Jr please get a cage or something. Like full on because that thing is a tin can. Chassis rigidity is gone. Its going to flex and deform when you go over bumps. Goodness forbit how bad it would be in a crash. Be safe bro! You bring comedy into many lives!
Drill the spot welds out on the doors where the bar was. It looks better and more weight is shedded. Just a thought man. Good vlog. My hatch is completely cut. Follow me on ig just_nate
Well you said it yourself you're not good at diagnosing things and mechanical things. Basically you're good at cutting things and detailing. And breaking things... Thank God you got Junior and Chris. My buddy is the same way he tries to fix the shit and then he breaks it and calls me! 🤡
I love how long this vlog was today
Wow that thing is gutted! It would be interesting to weigh just the metal you cut out to see how much of a reduction that is by itself.
Paint Jr’s hatch!! Show it that #dbfam love!!
Love the content from the dyno days!
dude you should paint it for junior cmon.
Are you adding a rollcage then to the EG?...because that scary to drive that EG on the streets w/o any structure protection etc...
The inside door handle is a NICE TOUCH!! Good idea cuh
Thanks cuh 👊
Dbfam notification gang wya
Tip: use a SEALED type battery when mounting it in the cab/trunk. Less chance of spills, less chance of venting flammable vapors. They are just a few bucks more. I use AGM motorcycle batteries in my crx and integra for cheap weight savings. Plenty to crank a high-comp four banger.
Nice job. Chassis any floppier? Weigh the pile?
Love that "everything is put away, ready for tomorrow" feeling. I love your channel.
Thank you and yeah nothing feels better!
I really hope a cage will be going in the hatch after that, I would really hate for something to happen to you guys in the event of a accident. Cutting the car this way without a cage in very dangerous. You completely change the way the car absorbs a impact and the way the inertia will travel through the vehicle. Also the inner door bar is ultra high strength steel and is there to protect you from a side Impact. Without a cage the car will fold like a coke can. I hope I'm not coming off as a know it all, or someone that is on here to talk sh!*. Love your vids and hope my ef hatch will be as clean as yours.
I was surprised how heavy the doors are. That pipe is mad heavy
Good move with the office bro now a days we as men tend to be up more than sleeping anyway 💯
Office update man! Hells yea
Should have left that bar in the drivers side door that will save his life in a wreck. unless if hes getting a cage.
There is 2 spot welds on each side on the door that welds that bar in drill them an it will slide out
Deserves so many more subs !!
For some reason on my h22 when my distributor was bad my fuel pump WOULD NOT TURN ON. as soon as I changed my distributor everything worked like a champ
Have to agree with the death trap this thing is now. Not doubting but just hoping you guys have a plan to make up for all the hatching. Stitch weld or a cage minimal
Street racing is playing with death anyhow brotha ... What can ya do. It's getting a harness bar 😆
there are spot welds that hold the bar in place. you guys should drill those out and it should just come out
Just dropped some bread on control arms for my civic 💯💯
i need those doors😫😫😫😫😫
Hey where you get this tool to cut the holes in the sideskirts? i definatly need that :D
Junior the type of guy to use the window as a guitar 😂 @ 08:47
Dope video man! Live the Progress on the hatch
Hey did you gut out the headliner too? I'll buy the rear headliner trim, thanks.
Love the videos, man. Send love from Aussie!!
Thanks brotha! From phoenix 💪😁
DeadBeat GANG! I WANT some car lift ups when y'all done!! 😎
The new intro is lit
I’m an electronic technician by trade. I wish I lived near you. I love diagnosing wiring issues. The 0.4 volts of potential could be a sign of a short.
I was understanding it this way, that if that fuse was showing .4v on both sides of the fuse spot that there was a break/open fuse or something somewhere near it. So we went through and replaced and made sure ALL fuses in the fuse box were good and the correct amp ones. Replaced the blue/white wire and verified it has good resistance and such. So after that I was at a total loss. I couldn’t find anything broken/wrong under there
There are two plugs on the fuse box on the integra that are the same check out if they are not on the wrong side it hapen to me and fuel pump issue was fixed
im surprised you didnt replace the tank while you had it down to replace the pump thats what i did when the pump went out on my crx
Wassup with them holes at 17:10 all of them are straight and then the last 3 are kinda funky
Haha yeah on the driver side it got weird.
That eg is going to be light can't wait to see when it gets to the scale
Drill some speed holes on the bottom of the doors and straight up the be pillar
Now that's how to scrap and lighten a Honda..!!! 😁👍
Broooo picking up a ef hatch si Monday from work the paperwork will finally be done. Thanks to meth heads that get arrested I always end up with some cool shit from work.
I am putting my k swap in it
So I’ll be posting all over built not bought
And thanks for the content man it really puts my mind in a good place
Like you have no idea how much your videos help me mentally.
you need to swiss cheese the lower rear control arms and also swish cheese the tail light housings and honestly cut out the spare tire tub and plate it!
Fuck I still got a bad painfull bump from tile and a grinder same shit. Cutting the circle out of the tile. .for the downspout around the wax ring... . I thinnk that's how I got it... I can't touch it very well. Hurts like crazy
.
Hey bro, outstanding diet program, any idea how much lbs/kg the car lost after all the cutting, would appreciate the info, thanks
Db gang in the house what’s up Arizona
It’s like butter but it’s good 🤣🤣 no mames jr trying too explain what goes on the elote
Hows the main fuse on the integra? I chased for a year until i bought a used fuse for 14 bucks
Ac and trans torque mounts or bye bye to post mount bolts
On which one the da?
Get a gel battery and shouldn’t have any issue if it falls over
Well that should fold up easier than a beer can. There's no structural integrity left. Please cage it.
Whats up with the black coupe on the street? New project? Kids car ? #deadbeatgarage
That's Gabbi's... She went out and financed her own car to be "independent" 😁😆
4:41 OOF
Lol, I'd be suprised if mine was still plugged in. Isn't that the seatbelt sensor for the buzzer?
Outspoken Insider I don’t know EG’s well enough to tell.
That’s what I said
Jose Molina lol you can see how much he cares about your car😆
When i relocated my battery i grounded to the body and starter and alternator and transmission
my doors are messed up , my crank window tracks are totally stripped or whatever the recent owner ofc had to messed em up.
Yeah dope vid, cut that tailgate but leave the light 💯
Good video brotha!
#dbfam
every 100lbs taken off saves a 10th of a second on the track, i promise you it matters
AYYYYYYYYYE #DBFAM
Yeet ready for new content
Look lrb speed for aluminum door
I hope there is a dope cage coming. That car will crumble way to easily in a small accident
Dont be too dismissive to an engine ground. I was having the same issue. Mine would prime the fuel pump. But when the key turned to start the car it was cutting the power to the fuel pump. And it wad an engine ground.
Damn i didnt realize you were so close. Ima have to go to a taco tues and say what up! Been hooked on ur channel since u got dooped by shawnee. Love ur channel. Saw u at ifo in the sedan. Im sure u saw my black crx run at least once. Lol
Probably will be at the next one.. taco Tuesday that is.
@@deadbeatgarage hell yeah! I so want u to help me see how much more weight i can remove from my crx. I really like how u drill out the door jams. I love that look! That be sick if i could have u do mine!
What’s the final weight of that eg?
Noti gang
office update for sure
Damn dude. Jr please get a cage or something. Like full on because that thing is a tin can. Chassis rigidity is gone. Its going to flex and deform when you go over bumps. Goodness forbit how bad it would be in a crash. Be safe bro! You bring comedy into many lives!
Please
🙏🙏🙏
I wonder how much weight you really saved😂20lbs?There’s really no point unless you need to shave off a eighth of a second off at the track.
You guys should weight all the metal you cut out and see what it weights
First 💪🏾💪🏾
dc2 video?👀👀
Both shells are for sale
@@deadbeatgarage i was wondering if you had any k20A engines for sale?
Fuck yea I’m ready
Fuel pressure gauge
K or J swap a 240sx or something man! A cool drift car series would be dope, along with track days!
Man that brings back memories hahaha
Hahaha 💪
Boom 39k subscribers... Step it up fkrs like share and subscribe. Maybe hire me as ur Manager deadbeat🤔🤣👊
Ya I hate bike cops!!! Just know if you get pulled over by one. Guaranteed Ticket!!! Always
Tell jr HMU I’ll make him that traction bar for his crx
Hell yeah let me know
Jose Molina Send me a pm on instagra brotha will link up and get that traction bar settled for you @jessegee94
Office update
MASSACRE
No helmet laws in Az?
Yeah. He mentioned it and that's why we were on the conversation about the cop. Just all the comvo didn't make the cut
i cant even watch this. that car is going to fold up like a pop can
1st wepa
Take all that aluminum/ metal to the scrap & weigh it so we can know how much weight you removed...
Drill the spot welds out on the doors where the bar was. It looks better and more weight is shedded. Just a thought man. Good vlog. My hatch is completely cut. Follow me on ig just_nate
Will do
You should paint the eg hatch and do like a budget friendly just black out murdered out look and explain how you can get a decent look on a budget.
swap the main relay for fun
Tried it bro
Ayeeee first one herrreeee
@16:00 kulva? or kurva? means b!tch in my language :'D
You better give us a fkn update.
Well you said it yourself you're not good at diagnosing things and mechanical things. Basically you're good at cutting things and detailing. And breaking things... Thank God you got Junior and Chris. My buddy is the same way he tries to fix the shit and then he breaks it and calls me! 🤡
You gonna be putting a cage in it? That thing is gonna be a death trap. Literally
At least a bolt in cage.
weight the parts ..se how much weight u cut out
We weighed the car before we started hitting and cutting so we'll get a number for sure 💪😁
@@deadbeatgarage ..oh yeah u right..🤦♂️😅
Here first!
Seat belts? Lmao they wont save you in that death trap. And jr been down since day one c'mon paint the man's car
💪🏼🔥👍🏼
🔥🤙🏼
I love your video man you should go check mine out I’m building a Honda Civic eg hatchback h22 swap
I know you guys don’t want to hear this kind of stuff but I worry for your safety, driving around on the streets with those cut up cars.
1st to share!
First like !
15:57 "kurwa"
Wtf is wrong with people being so proud of being first anyways.... This ain't the 1/4mile fkrs🤣
Kite
How do you know kurwa? 🤣
Worked with a bunch of polish guys for 8 years! 😆
@@deadbeatgarage lmao thats whats up, after few shots of potato juice you be speaking polish with no problems. Keep up good content on the channel.