Thank you. Was on phone with company for 3 hrs. They couldn't figure out. They sent me parts. Still same problem. Watched your video before calling in again and you solved problem.
I have to thank you very much because I was getting so frustrated I started to cry thinking that I just bought all this and nothing's working and you telling me to change it to a com port even though it's connected USB absolutely worked thank you thank you thank you! I have the JK 871
Thanks for the video. After initial installation it worked fine and then it started to act weird. I followed these steps and I' m back running again :)
My cutter is doing the exact same thing I've tried everything I could do to reset it but it's still frozen on the welcome screen how can I resolve my issue..
it is nice to see you are taking the time to reply to people, and help them, we are having issues ourselves, it worked before, and now it doesn't it says connection error on the screen
So I just dragged this machine back into service and this time, I also did not receive a beep, but it's working. I had to play with the settings....AGAIN!
Hi I have a Copam CP2500, it's not cutting. its working with Serial and parallel port only, when I turn on this Machine, load the vinyl, select roll or page press enter, the machine measures the vinyl, if I press “TEST” it cuts a squar with a circle inside, but if I send something from the computer to the machine it scroll to the end of the vinyl and stop, without cutting anything. Any advise please.
Sounds like either the vector being sent has an issue, like a phantom line that it’s trying to cut, or, the port is still not correct. 🤷🏼♂️ Good luck with it, I hope you get it going.
Thanks for replying. Do u hv any idea what should I do. Cuse I switched every thing off computer and the cutter then on. The cutter stopped rolling but when I connect the USB start rolling again
hello, good day, do you think you could help me with some doubts, I have a vevor ki 720a cutting plotter, only I cannot configure the laser and blade, I hope you can help me,
I just got my Vevor cutter 34" i install the program but don't connect with the machine i trying all i just give up and maybe i will see if i can return it 😓
I did my last try to see if work and make it work i just buy a new laptop and install the program first, download the drivers from the site and at last connect the plotter and work fine. Work only with files from their own don't work with any others files and i don't think work with any others software's like Flexysign or Signlab, etc etc Is just start all new jobs using this program at least you can cut letters, numbers and shapes 😉😄is why is cheap machines
I am new to a cutting plotter. I bought pne recently but it cuts a straight line down my vinyl and something inaccurate alphabet. Please how what can i do about it...😢
Im having trouble with finding and installing the driver for my GCC Sable sb-60. My cutter comes up in devices as USB printer. But yet no driver can be found when troubleshooting. Do you have any idea whats going on? Please and thank you.
My cutter had the same problem I’m using signmaster 3.5 I complained to the company and they sent me universal drivers and it started working after I installed the zip file they sent me so it’s the drivers you need to up date them
I’m having issues where the program is not sending the job it stuck on 0% I hit send but nothing happens I don’t know what to do any help please anyone ??? Thanks
KI-720 first time came with Singmaster software I use end erase for error....buy 2 more same Singmaster and not give me options for conet my cutter... please help me
Hey bro...i am having a heck of a time tryn to figure out what to do...my cutter wont respond...everything works great...i use coreldraw 12 and export the art for cutting in the artcut 2009...it has been giving me a hard time as i cant cut once i have commanded nthng happens and it freezes...what should i do...am returning jerseys to clients unprinted
Good morning, I have a problem with this same cutting plotter, what happens is that it does not do the area test, it does everything but that and I need it urgently. I clarify that I have a pc of 2011 and that works perfectly, but I updated to a pc of 2021 and this is what I have the problem.
I have mine on that as well but I can't use it for contour cutting. My red light on my cutter won't come on. I feel like it has to be connected to USB and not Com for it to work. Any advice ?
I had a problem where my cutter would not cut. I uninstalled latest windows update and then it worked. But when you restart the computer, the update installs again. Just letting you know.
Hi : I have ki 720 model...but my usb port is broken..from where I can get it please..what's is called.i. Search alot but coudnot find.if anyway can tell please.thanks
Did I just fuck up by purchasing this thing? I bought it used and I’ve been working trying to figure it out for over 6 hours and can’t figure out a thing. It doesn’t show the port connection type that I need. I tried using other ones like you said in the video and nothing.
@@VroomBroomZoom I tried changing my port settings and still nothing. It says install drive cutter and it can’t seem to find anything to install! It’s with sign master the basic version that came with my plotter. I have the same model plotter I believe
Having problems with the vinyl express r series 2 it stops in the middle of the cuts but sometimes it ya complete a cut don’t know what to do got a keyspan and swapped out Db9 cables one works but only half and the other does absolutely nothing at this point don’t know what else to do
Sorry this sounds like a crap problem. If it stops in the middle fo the cut, it might be spooling for an unknown reason, maybe wait for a while and see what happens....might be a long pause. It could also be malfunctioning and be daing a self-preserving stop. Good luck with it.
I have the same model and only worked for vinyl cutting and I’m trying contour cutting for dark transfer and sticker paper but I can’t make it to properly read the registration mark so the cut won’t align. Have you tried using yours in contour cutting?
Pls help me. Every time I’m trying to get a download image to tag it signCut it say no object could be found. I’ve tried multiple images. It also say make sure the file contains vector graphic and is saved without the compression-flag set. How to fix this problem?
The picture you downloaded is not a ‘real’ vector picture. Sometimes they use the same file type, but are not true compatible vector files. Look for another similar image.
Thanks for the info, I have the same machine but I still have that problem, is not detecting through USB even if I select the other ports, any other idea why is that? I also have the signmaster software
This Is exactly the same problem as mine they have sent me different drivers and yet it still won’t send through port and your video does not fix my problem, been through all ports
@@hammered-timedetecting1835 did you ever get it figured out? i am having the same problem, when i go to "select cutter to install" there is no items in the dropdown menu
@@higherlearning4696 I think it was the first but I ended up emailing support and they sent me an additional driver that I installed and now it works perfect 👍 thank you
Not sure if you can help, any idea why the vinyl is getting caught when it comes back from the left side? Area test is great but when it starts the job it seems to catch and the vinyl buckles underneath the blade. Any help would be great!
Try turning the blade in the holder. Also, the pressure on the far vinyl holder might be too loose? Adjust at the back as per the other video I’ve posted.
When I plug my plotter into my computer. The carriage goes to the left (left error). I've tried resetting, changing the USB cable, port changes etc., and it still goes to left error when I plug it into the computer. Any suggestions on how to correct this problem.
@@VroomBroomZoom thanks for your reply. What I'm trying to figure out is if I can use solidworks software to create and send the graphic outline to the cutter
Sorry Julie not sure how to help. Sound like a cable ocnnection issue if it was definitely working though. Try going from the start. Is it being detected?
I have an antique desay vinyl cutter, thats who makes these plotters. Its at least 15 years old, been in storage 10+ years. It only has serial and parallel ports, very outdated. Anyone know which usb to serial cable will work?
Are you using the cord that came with it? Maybe the type of USB port on your laptop isn't compatible with the machine. Make sure it is in properly. Do other USB things work with that port?
@@VroomBroomZoom when you connect a USB device. You get certain tones. Like a low tone and a higher tone. When I plug this in I get 2 low tones. Weird is I had this cutting once before and now nothing frustrating
Man you are awesome thank you for the video!! For taking time out of your day to help!!!!! I think my machine might have been shipped with an older program software for the reason being that my model does not appear on the software program. Any chance on how to get my hands on a newer software?
@@CJN2930 Hey, not sure how I missed this comment. Hope you got it going. I think the onyl way forward is to start spending money on reputable software.
@@VroomBroomZoom no need to, I used the cable provided, settings were the same but the problem also remained and my cutter was recognized by the computer. What I am going to do is get an DCOM adapter for my computer to see if that will work.
Imaging saying "Why is this showing up as a mouse in my computer? It's plugged into a USB port!" That's where most of the dislikes come from, I imagine.
You're the man! Not sure how it changed, but switching to a different COM port got me back up and running. Huge thanks to you!
You are welcome!
THANK YOU! I was having the hardest time connecting and was starting to get a little irritated. This was exactly what I needed.
Glad I helped 😀
I just bought the machine in 2023 and this problem still remains. you solved my problem, thank you very much.
Glad you got it working 😊
Thank you. Was on phone with company for 3 hrs. They couldn't figure out. They sent me parts. Still same problem. Watched your video before calling in again and you solved problem.
That's awesome, glad I helped. 😊
Thank you so much, I’ve been dealing with this for a while with work set aside and customers waiting.
Thanks heaps, I can now cut with my cutter. It was driving me insane and now it works, so thanks!
Glad I could help 😊
I have to thank you very much because I was getting so frustrated I started to cry thinking that I just bought all this and nothing's working and you telling me to change it to a com port even though it's connected USB absolutely worked thank you thank you thank you! I have the JK 871
Thanks for the video. After initial installation it worked fine and then it started to act weird. I followed these steps and I' m back running again :)
Awesome!!
THANK YOU! This video really helped me out with my vevor cutter, thanks again bro
Hi Do you know anything about frozen welcome screen? my plotter is stuck at welcome and will not reset at start up.
Isn’t there a hard reset button? Don’t have it anymore sorry.
My cutter is doing the exact same thing I've tried everything I could do to reset it but it's still frozen on the welcome screen how can I resolve my issue..
it is nice to see you are taking the time to reply to people, and help them, we are having issues ourselves, it worked before, and now it doesn't it says connection error on the screen
Good luck with it! Try reinstalling the driver 👌👌👌
@@VroomBroomZoom yes sir, we did, we changed which usb socket we used, my husband says even when working, it has never beeped when plugging in
So I just dragged this machine back into service and this time, I also did not receive a beep, but it's working. I had to play with the settings....AGAIN!
Hi I have a Copam CP2500, it's not cutting. its working with Serial and parallel port only, when I turn on this Machine, load the vinyl, select roll or page press enter, the machine measures the vinyl, if I press “TEST” it cuts a squar with a circle inside, but if I send something from the computer to the machine it scroll to the end of the vinyl and stop, without cutting anything. Any advise please.
Sounds like either the vector being sent has an issue, like a phantom line that it’s trying to cut, or, the port is still not correct. 🤷🏼♂️ Good luck with it, I hope you get it going.
What if there is no option on the drop down list (like com port or usb)
That could means it hasn't connected perhaps? Can you confirm somehow that it's connected?
Hi do you know why the machine keep rolling don't stop. Thanks
🤷🏽 maybe there is a vector being selected that is making it roll further?
Thanks for replying. Do u hv any idea what should I do. Cuse I switched every thing off computer and the cutter then on. The cutter stopped rolling but when I connect the USB start rolling again
hello, good day, do you think you could help me with some doubts, I have a vevor ki 720a cutting plotter, only I cannot configure the laser and blade, I hope you can help me,
Hi, I'm not sure about other models, but forum searches are your best friend. :)
I am using sure cuts & easy cut studio and its not detecting its a Vevor but its picking up on SignMaster
Sounds like those software would need different connection settings again.
Pls can u help my plotter just start cutting unwanted line during plotting
This is most likely when you have a ‘hidden’ vector in your design that doesn’t show up well in the preview etc.
Thank you SO MUCH!!! It worked perfectly!
I just got my Vevor cutter 34" i install the program but don't connect with the machine i trying all i just give up and maybe i will see if i can return it 😓
Did you try different USB?
@@VroomBroomZoom yes i try different this is a Vevor cutter ki-870
@@VroomBroomZoom i will reinstall again the program to see if that will work
I did my last try to see if work and make it work i just buy a new laptop and install the program first, download the drivers from the site and at last connect the plotter and work fine.
Work only with files from their own don't work with any others files and i don't think work with any others software's like Flexysign or Signlab, etc etc
Is just start all new jobs using this program at least you can cut letters, numbers and shapes 😉😄is why is cheap machines
I am new to a cutting plotter. I bought pne recently but it cuts a straight line down my vinyl and something inaccurate alphabet. Please how what can i do about it...😢
Sometimes there are hidden vectors in your file, try that first
hello
i have foison cutter c24. how it possible to download drivers for it ?
Im having trouble with finding and installing the driver for my GCC Sable sb-60. My cutter comes up in devices as USB printer. But yet no driver can be found when troubleshooting. Do you have any idea whats going on? Please and thank you.
My cutter had the same problem I’m using signmaster 3.5 I complained to the company and they sent me universal drivers and it started working after I installed the zip file they sent me so it’s the drivers you need to up date them
I’m having issues where the program is not sending the job it stuck on 0% I hit send but nothing happens I don’t know what to do any help please anyone ??? Thanks
This sounds like it didn’t connect properly. Try the different ports.
Hi sir i face problem error (plot and sheet size) how to solve it
Software settings
hello guys. i took the same plotter CO-Z but i need help to find a video tutorial, please. thank you
Sir, Why it is, it cannot contour cutting. It said right error.? Ki 720ab?
I haven't done contour cutting on this machine, it would need some setup marks etc, it should be a manual setup and a normal cut.
KI-720 first time came with Singmaster software I use end erase for error....buy 2 more same Singmaster and not give me options for conet my cutter... please help me
Sorry I am unable to help any more than what is in the video
Thank you so much for this video. The tip worked instantly! I'm enjoying cutting my stencils. Be blessed.🙏🏿
Glad it helped!
Dude…thank you 🙏🏿 I’m like wtf! So simple and so effective. Appreciate you fam. Big blessings 💯
Hey bro...i am having a heck of a time tryn to figure out what to do...my cutter wont respond...everything works great...i use coreldraw 12 and export the art for cutting in the artcut 2009...it has been giving me a hard time as i cant cut once i have commanded nthng happens and it freezes...what should i do...am returning jerseys to clients unprinted
Has it worked ever before?
@VroomBroomZoom it used to work perfectly...no problem at all...day before yesterday its when it stopped
thank you for helping me out with this problem.
I have installed with the usb cutter and the port cable and i cant get it to work.
port cable? Try the USB cable
Not sure if u can help, why is it doesn't cutting even if i already clicked the "proceed" to cut?
Sorry, has not happened to me, but I’d say connection issue. Did it used to work?
Good morning, I have a problem with this same cutting plotter, what happens is that it does not do the area test, it does everything but that and I need it urgently.
I clarify that I have a pc of 2011 and that works perfectly, but I updated to a pc of 2021 and this is what I have the problem.
Sorry Pedro, no idea. Try the settings it’s all I can recommend
Can you get Bluetooth adapter for these models
No idea sorry, but I’d say no
I have mine on that as well but I can't use it for contour cutting. My red light on my cutter won't come on. I feel like it has to be connected to USB and not Com for it to work. Any advice ?
Play with the settings until it works
Physically, definitely usb
I had a problem where my cutter would not cut. I uninstalled latest windows update and then it worked. But when you restart the computer, the update installs again. Just letting you know.
That sounds horrible 🤦
Could you install a VM?
dude!! great input!! specially for people inept with computer. Thanks
hello how are you I have this plotter I have a problem that I do not cut correctly can you help me chw speed I put that force
Buy cheap vinyl and play with the software settings. Also with the pressure on the rollers.
Hi :
I have ki 720 model...but my usb port is broken..from where I can get it please..what's is called.i. Search alot but coudnot find.if anyway can tell please.thanks
What do you mean by the port being broke? As in, physically broke?
Did I just fuck up by purchasing this thing? I bought it used and I’ve been working trying to figure it out for over 6 hours and can’t figure out a thing. It doesn’t show the port connection type that I need. I tried using other ones like you said in the video and nothing.
This might sound a bit condescending, but did it actually connect via the USB? Did windows recognise it as a device?
I can’t seem to find ANYTHING to help me with mine. I tried everything. Any help?
What’s the problem?
@@VroomBroomZoom I tried changing my port settings and still nothing. It says install drive cutter and it can’t seem to find anything to install! It’s with sign master the basic version that came with my plotter. I have the same model plotter I believe
Try to install the machine manually perhaps. I had to change port settings again this week when I got it out and dusted off the cobwebs.
Thank you Legend! should have watched this properly ages ago hahaha
No worries!
Having problems with the vinyl express r series 2 it stops in the middle of the cuts but sometimes it ya complete a cut don’t know what to do got a keyspan and swapped out Db9 cables one works but only half and the other does absolutely nothing at this point don’t know what else to do
Sorry this sounds like a crap problem. If it stops in the middle fo the cut, it might be spooling for an unknown reason, maybe wait for a while and see what happens....might be a long pause. It could also be malfunctioning and be daing a self-preserving stop. Good luck with it.
Trying to get a db 9 female male connector maybe if I can shorten the distance because it seems like the bigger scaled stuff stalls out
do I have to Install some drivers?
Yes
holster not coming down and cutting. But it's making the cutting action when I send something to cut. Any help
You can adjust the knife height. Start there?
@@VroomBroomZoom that might have too much of the blade out which should not be. Will try still, thanks
Can you cut a gift box and make thé folding lines with this machine? I think thé brand IS vevor
Not sure sorry, but I think it would have the capability.
Direct usb on port type won’t work help please
Has it connected properly first? Try re-plugging
ASC365 cutter cant find any drivers for this ugh, wont allow me to use not recognized on any software :(
Please guide how can download a diver of cutting ploter from the internet because I have no cd of the driver and machine is redsail cz720
Lol, yeah nah 👍
Just google your model with the word driver
hi, do you have the plugin of corel draw skworker v2019?
No sorry
I have the same model and only worked for vinyl cutting and I’m trying contour cutting for dark transfer and sticker paper but I can’t make it to properly read the registration mark so the cut won’t align. Have you tried using yours in contour cutting?
Nope, looked like a major pain. There are videos I’ve seen of how to align, good luck 😊
I have the same problem. My little red laser light won't come on to do contour.
Pls help me. Every time I’m trying to get a download image to tag it signCut it say no object could be found. I’ve tried multiple images. It also say make sure the file contains vector graphic and is saved without the compression-flag set.
How to fix this problem?
The picture you downloaded is not a ‘real’ vector picture. Sometimes they use the same file type, but are not true compatible vector files. Look for another similar image.
Thanks for the info, I have the same machine but I still have that problem, is not detecting through USB even if I select the other ports, any other idea why is that? I also have the signmaster software
Have you tried the COM port? Sometimes non-USB ports connect...good luck with it! Also, try other USB slots in your PC.
This Is exactly the same problem as mine they have sent me different drivers and yet it still won’t send through port and your video does not fix my problem, been through all ports
@@hammered-timedetecting1835 did you ever get it figured out? i am having the same problem, when i go to "select cutter to install" there is no items in the dropdown menu
@@1907Syndicate did you guys install the usb version or disc version?
@@higherlearning4696 I think it was the first but I ended up emailing support and they sent me an additional driver that I installed and now it works perfect 👍 thank you
Not sure if you can help, any idea why the vinyl is getting caught when it comes back from the left side? Area test is great but when it starts the job it seems to catch and the vinyl buckles underneath the blade. Any help would be great!
Try turning the blade in the holder. Also, the pressure on the far vinyl holder might be too loose? Adjust at the back as per the other video I’ve posted.
When I plug my plotter into my computer. The carriage goes to the left (left error). I've tried resetting, changing the USB cable, port changes etc., and it still goes to left error when I plug it into the computer. Any suggestions on how to correct this problem.
Try pushing it to the right manually 🤷🏽, restart machine
It could also be an origin setting.
Just curious as to what software you use for the better vectors? Thanks
I just use the one I mention in the video...I'm sure there are heaps of better ones out there, but I'm not a professional. 😄
What file type does this cutter require?
Can be most vector files, definitely the main ones
@@VroomBroomZoom thanks for your reply. What I'm trying to figure out is if I can use solidworks software to create and send the graphic outline to the cutter
Whats the file extension?
@@VroomBroomZoom yes exactly what type of extention file does the vinyl cutter need to receive from software?
Mine vinyl cutter is 780 t the software is old from 2009 were can I buy a upgrade software?
Download.com ?
Hi, my computer is not detecting my Foison c24. I hear the USB sound and it says the latest drivers are detected. Can you help please?
Try the different ports in the settings, The non-USB ones.
Hi trying to set up my cutter plotter it said it KI-375 can fine it on software how do fine it please new to this
If it’s not on there, they an alternative model. Need to google it probably👍
I have the k1 720. One cut and now not working
Sorry Julie not sure how to help. Sound like a cable ocnnection issue if it was definitely working though. Try going from the start. Is it being detected?
It was that I have to designate the printer everytime and after about 5 times it starts connecting to the spooler program without designation process
Pls my plotter stops mid cutting ( it cut 1line and stops
Sorry can’t help. Maybe try a different file to print, Andrew the usual ports etc
I have a spooler code and! Can't find a code book
Can’t help sorry 😞
You can play with baud rate too.
do u know of a driver for this. Ive bought it and it didnt come with a driver
Sorry, but I think if you google your model, you'll find something fairly quickly.
Thank you so much! You're a life saver
I have an antique desay vinyl cutter, thats who makes these plotters.
Its at least 15 years old, been in storage 10+ years.
It only has serial and parallel ports, very outdated.
Anyone know which usb to serial cable will work?
Try going to USB.
What happen if the USB cable won’t appear on your Hp laptop, like mine 🤦🏽♀️
Are you using the cord that came with it? Maybe the type of USB port on your laptop isn't compatible with the machine. Make sure it is in properly. Do other USB things work with that port?
I had a similar problem and I solved it in the help tab above and where it says activate product just update and that's it
The active product have a key,not let me click!
Genius! Thankyou
You're welcome!
Good day can you give me a driver for jinca 721 thank you
I can not sorry, I do not have it, but I’m sure you can find it on a forum somewhere 👍
Thank you I’ve been pulling my hair out
pleas give me driver
Don't have it sorry....just google the model.
Y am I getting a error
wont even let me pick a comp port, just says not connected and wants me to auto detect which it never finds it ugh
I'd recommend a diferent USB port? Maybe also try turning machine on first, then connecting USB.
@@VroomBroomZoom when you connect a USB device. You get certain tones. Like a low tone and a higher tone. When I plug this in I get 2 low tones. Weird is I had this cutting once before and now nothing frustrating
Hello I here a nurse from my vinyi cutter machine and the machine modem is Seiki
WHAT IF YOU AR USING ARTCUT
No idea sorry
Man you are awesome thank you for the video!! For taking time out of your day to help!!!!!
I think my machine might have been shipped with an older program software for the reason being that my model does not appear on the software program. Any chance on how to get my hands on a newer software?
Btw i will give the video a like and i will also subscribe for the fact that you actually interact with the viewers and attempt to help
Run Andy Run fron sign cut what is model this ?
@@CJN2930 Hey, not sure how I missed this comment. Hope you got it going. I think the onyl way forward is to start spending money on reputable software.
THANK YOU SO MUCH!!!☺
Please my machine will stop cutting while the work is not finished. You’ve got idea?
No sorry, sounds like it ran out of memory perhaps.
i can't connect on my pc, Please help me out .
Try different USB ports. Maybe ones on the back. Then play around with the settings as per the video. Sorry all I can help!
No my problem is I can't connect to the software which it won't allow me to print.
How far have you got?
Not far I can't connect it to the software..
Thank you!!!!
Outstanding!
Thank you very much!! Mine was, the cutter name changed and I didn't notice
I didnt think it would works but my god it acc did 😂😂😂
Hahahaha awesome! 👌
Had these kind of machine at work as well.
the documentation of these are horrendous
Yay you made it.
Whoohoo!
thank you, you explained it RIGHT lolol
I lose USB driver so I can not connect to machine
USB is plugged up no connection sound or detection what so ever , brand new out the box came with sign master
Have you tried your other USB ports?
@@VroomBroomZoom I have the same problem an tried all my ports still nothing
I'm interest to buy this machine. I'm from Bangladesh. How can buy this please answer me?
EBay!!!
Link in description
@@VroomBroomZoom Ok. Thankyou
do u guys have link on a crack version of signmaster?
I fail to see how this video solves the aforementioned problem
😂😂😂 thanks!!! Watch it again....carefully.
@@VroomBroomZoom no need to, I used the cable provided, settings were the same but the problem also remained and my cutter was recognized by the computer.
What I am going to do is get an DCOM adapter for my computer to see if that will work.
Mine advances each time instead of going back to 0-0
What do you mean? 🤷♂️
wayyy too much talking sorry mate. but thanks for video
Imaging saying "Why is this showing up as a mouse in my computer? It's plugged into a USB port!"
That's where most of the dislikes come from, I imagine.
1 no
wha
pls tagalog pls
Wha? 🤷🏽