HONDA CBR250R - CLICKING / KNOCKING / TAPPET SOUND / ENGINE NOISE SOLUTION - SHIM REPLACEMENT
ฝัง
- เผยแพร่เมื่อ 18 ม.ค. 2020
- Don’t be a selfish viewer
Please SUBSCRIBE and support
WARNING: PLEASE READ CAREFULLY.
THIS VIDEO IS JUST MADE FOR INFORMATIONAL PURPOSES AND AS A GUIDE FOR YOU. OPERATIONS PERFORMED IN THIS VIDEO ARE RISKY AND CAN MAKE PROBLEMS IN YOUR BIKE'S ENGINE IF YOU DON'T HAVE TECHNICAL KNOWLEDGE ABOUT IT.
I'LL NOT BE RESPONSIBLE FOR ANY PROBLEM / DAMAGE IN YOUR MOTOR BIKE AND/OR IT'S ENGINE AFTER PERFORMING THE OPERATIONS AS EXPLAINED IN THE VIDEO.
JUST PERFORM AT YOUR OWN RISK.
STEPS AS EXPLAINED IN THE VIDEO ARE RISKY ENOUGH IF YOU DON'T HAVE TECHNICAL KNOWLEDGE. SO I'LL SUGGEST YOU TO HIRE AN EXPERT MECHANIC WHO HAVE SOME TECHNICAL KNOWLEDGE AS WELL.
Shim Gaps at 13:20
In this video you'll see the solution for an unwanted clicking / knocking / tappet sound / engine noise.
Actually the solution is changing the SHIMS but many CBR250R riders / owners are not aware about it so they always think why this sound is coming so solution is here in this video in hindi language.
If you have some questions / suggestions just comment it or send at messenger /
#CBR
#HONDA
#CBR250R
#ArunVideoLogger
#AVideoLogger
#Arun2wheels
Subscribe my TH-cam channel
/ arun2wheels
For more updates follow me at Instagram -
/ arun2wheels
Like my Facebook page -
/ arun2wheels
Live chat at Messenger -
www.m.me/arun2wheels
Live Chat on Telegram -
t.me/arun2wheels
Song: Jarico - Island (Vlog No Copyright Music)
promoted by Vlog No Copyright Music.
Video Link: • Video
#NoCopyrightMusic
#VlogMusic
#VlogNoCopyrightMusic - ยานยนต์และพาหนะ
![[TH] VCT Masters Shanghai Playoffs DAY 2 // PRX vs G2 | EDG vs TH](http://i.ytimg.com/vi/T5j2XVcDFs0/mqdefault.jpg)
PLEASE SUBSCRIBE GUYS DON'T BE A SELFISH VIEWER.
If you need more information, let me know in comments or at instagram or messenger.
Today I was at the service center for this issue. The service engineer used scare tactics and told me that there appears a major issue with the bike's engine.
He told me that some parts appears to be broken in the engine and told me not to ride the bike at all.
After some research on the internet I told him about the issue and then he was so scared and told me that there isn't any major issue and that I may ride the bike as hard as I want. Still he coated me a sum of over 3 thousand INR for replacement of 4 sims including labour charge of 500.
Thanks for sharing good knowledge on the web, this saved me a lot of tension and money.
Thanks for sharing your experience bro, all service center are used to for this bad habit... Please SUBSCRIBE.
bhot achha hua bhai aapki video dekh kar mai to aaj bhot tension me tha
macanic ne bataya tha piston kharab ho gaya
❤❤❤thank you sir
Thank you so much for the videos!!
Thanks brother please subscribe for support.
Great video. It’s very true that the service Center charge a hefty amount to a tune of 45k plus saying that the head needs to be replaced.
I think you have been cheated. Please subscribe and support.
@@Arun2Wheels its Preetam Honda at Andheri east, Mumbai. I took the bike and got it fixed for a nominal cost from Vihaan motors Thane.
@@kailashrele Good bro, finally people are understanding.
Subscribe and share for more hacks
Very informative... Thank you
Subscribe and share for more hacks
Yes, it happened with me in last month, my bad luck i was seeing this video too lately. It costs me total around 16k. changed crank shaft which costs around 10k and service for opening engine was around 4k.
Thank you 👍
Bhai even my bike sounds like this thank you very much for the video
Please subscribe brother for support.
Awesome video, I hv same problem with my cbr...I hv issue with chain tensioner...my problem got resolved.
Good to hear from you... Please SUBSCRIBE.
Bhai tu bohut aage jayega. Very informative video hai and nicly executed. Woh bhi Ek haat se 😂
Thank you!
Thank you. Tumhari baat sach ho...
Subscribe and share for more hacks
Very well explained ❤️ superb
Thanks Bro, Please Subscribe...
Love you bro literally ❤
I think it has saved your something. if yes please subscribe.
Yeah brother ❤️ at the end you are the owner of the legend cbr 250r
Itna disclaimer dene ki kya jarurat hai bhai? koi aapko jimmedar nhi therayega, you are doing a good job 👍🏼
Bhai aap nahi balm nahi karoge par ye jo video hai wo hi apne aap me proof hai ki ye saare instructions maine hi diye hai isi liye disclaimer dena jaroori hai kyoki kuch log hi isee theek se kar sakte hai baki to bigad hi denge.
@@Arun2Wheels chalo koi nhi, lekin aapne ye video bohot sahi banaya hai, ekdum detailed mai, hats off to your knowledge 👍🏼 Mere CBR250 mai gaye 4 salose ye aavaj aarahi hai, abtak showroom walon ne bohot loota. Lekin problem solve nhi hui. Ye video dekhne ke baad ab mai kisi local mechanic se karvalunga. Thanks a lot to you. 🙏🏼
@@kingshivba365 Service centre sada hi loot te hi hai. Please subscribe for support.
@@Arun2Wheels sure 👍🏼
Wao... amazing... u are great bro.... tum tho mechanic k baap nikle
Thanks bro, 🙂
@@Arun2Wheels mst wlcm
Brother pls guide how to open up the cbr250r throttle cable. My headlight switch is almost coming out. And only upon hard pressing it the headlight switches on.
Kindly guide
Join me at messenger or instagram. I will explain you.
@@Arun2Wheels pls share a video of the same.
@@gauravG1614 will try bro
Txss👍👍
Do we have to change the timing chain when we change the shims?
my mechanic suggested the same. What are your thoughts?
If your bike is under 35k kms no need to change it, but as it is not an expensive part you can change it before. Please subscribe and support.
@@Arun2Wheels my bike has done 63000 odd kms
@@ruturajagashe7480 then you have to change it. If you have never changed in past.
@@Arun2Wheels thank you. Hope it's not a big dent on the wallet😅
@@ruturajagashe7480 timing chain is not so much expensive but the service cost can be. Because mechanic has to remove clutch side cover and open the head cover as well be careful while whole process otherwise a single small screw can damage whole engine if it falls into it. Feel free to ask anything. Please subscribe.
Bhai ek video banao jissme honda cbr 250 ki Clarence check kaise karte hai or sims ki calculate kaise karte hai boo bhi batana
Will try
Superb
Thank you
You're always welcome bro...
Btw nice video
👌👌👌👌👌
Thanks
Thanks a lot brother.
@@Arun2Wheels You are most welcome
Nice information.
If you've any additional questions you can ask me at Messenger and Instagram as well...
Bro is this your first shim change ? My CBR 250R is 2015 model years and 19000kms , that same tik tik sound had started coming from the engine, want to know what is the stock shim size that is given in CBR 250 and how much size the first shim change needed ? I am little confused please help !!!
Size must be measured first it is not fix for every bike it completely depends on riding pattern. And it was my first.
Does this means that my CBR will also need the same size shim ? Because I read somewhere that there is a range of size that is acceptable
@@Arun2Wheels okay bro understood
@@sandeepanmazumdar6473 please subscribe for support.
@@Arun2Wheels Already subscribed
Txssssss😇
Sir cbr 150 r me new shims daal rha hu size kya rakhna jise nosing na ho aur compressor bhi shi seaaye plz batye size kitti rkhna h 4 ki
Measure karna hota hai fix nahi hota.
@@Arun2Wheels kis hisab se sir mesar kare
@@pankajshukla1354 jis hisab se video me diya hai.
Same issue i am facing with my CBR 150R, i went to mechanic and they said it will cost 7k engine issue.
My bike run 58+ km.
I observed that its an issue of every CBR BIKE after 40k+ km
Thank you for your information.
Please note the gap between shim and tappet which i have mentioned in the video is only applicable for CBR250R.
@@Arun2Wheels but i am also facing the same issue in CBR 15R
same sound knocking.
I can understand brother that's why I am just informing you that you can use this video as a guide for any bike but this was specifically made for cbr250r.
Wow!! Bahut achha review hai bhai. Apka mobile holder techniques batasakte...mere ko bi vaisa lena hai
Will try
Thanks sir 👍👌
You're always welcome, my technical friend 😃😃
Bro do you have spare shim available or how to source them? Service centre saying its not available
You can tell me the exact size of shims whatever you want and I can ship them to your address if you’re in living anywhere in Bharat. Connect with me on Instagram for more details. Links are in about of the channel or you can search with arun2wheels. Please consider subscribing the channel if you like any information.
Hi
can please tell how did you installed the jaw mount.
Jaw mount in this video? Where tell me the time where you find that
Is it like same with when you do 24k km sequence control?
What is same? Clicking sound or engine smoothness. Please ask in details.
@@Arun2Wheels When looking at the Honda user maintenance schedule, valve control is seen in 24.000 kilometers. Is your operation the same as the operation in the maintenance schedule?
But 24k kms when you ride in proper way but if you ride rough then it can happen just at 12k as well.
Yes it is same.
Bro my cbr have an issue of that knocking sound.the local guy told me that it seems the crank shaft,rocker arm and timing chain and tensioner must be replaced and it will cost above 10k and incase the head needs to open the amount will go higher.im so much worried of his statement.plz help me
You're just going to be a victim of fraud. Just leave that mechanic as soon as possible and go to another who can understand this issue. Just show this video to him and ask for the resolution. There is only need to replace shims no more things like crank it can maximum to rocker and rocker arms in case if these are damaged. Or you can ask a KTM worker to solve your issue they can understand easily.
@@Arun2Wheels thnk u bro...
Please subscribe for support.
@@Arun2Wheels sure...bro my cbr getting an irritating noice from the chain side.but it is not upto it's expiry and still have the life to go on.what will be the solution and is the problem might be with clutch cable or something else ?
How many kms your bike has done with chain set? If it is approx 20k you need to replace it. Otherwise just do a proper alignment of your bike's rear wheel with chassis and clean the chain properly with a good chain cleaner and lubricate it with chain lube after drying with a clothe.
I am purchasing a second hand cbr 2013 bike running 40k kms what are the things that have to be done and at what price is it good
Watch my video on 2nd hand bike purchase.
Bro any help where to source these shims from? I can not find them with any dealer locally. Thanks
Tell me the size, I can provide you.
Honda CBR 250r shim nhi Mila rha pls send me link
@suryavishwakarma1731 link nahi hai me khud hi bechta hu aap mujhe telegram ya Instagram par contact karo.
my cbr has sound like that but at rpm 4500 above. when idling, there is no sound like this.. can you tell me where is the problem of my cbr engine? thanks
First tell me how much your bike has been crossed on roads.
@@Arun2Wheels my cbr has reach 25000 km on speedometer
As your bike has done 25000 KMs, I have different opinions, consider following 2 points
1- if there is clicking sound and if no lack in power delivery at any RPM
then replace the shims with perfect fit size.
2- if there is clicking sound and lack in power delivery as well after certain RPMs in many gears.
Check the rocker arm as well it can be broken so you've to replace it immediately ASAP because it can take you in trouble at any time and can be reason of expensive engine problems.
Note- check power delivery on road in every gear.
@@Arun2Wheels
Beside knocking sound at high revving (4500 rpm up). My cbr also has top speed problem. At 6th gear, hard for my cbr get 130 kmh. Maybe you right for point number 2. I will check rocker arm ASAP .thank you arun for your advice. Waiting your next video especially about cbr 250
You're always welcome...
Sir meri bike cbr150,2015model h shins noise krahe to aap bta sakty g ki shims ka przie aur labbour chrge kitna lgega
Minimum ₹2000
@@Arun2Wheels 2000me complete labour with ya shims bus
@@pankajshukla1354 ha 1600 ke approx shims aate hai 4
@@Arun2Wheels kisi ne batay 800me ajte h
@@pankajshukla1354 wo 2 saal pahle aate the.
hi bro can u plz say me from wear u got the shim or u have bai online so plz share the link
You can not get them online only thing you can get them at any Honda service center but if you still unable to get them you can ask me with actual size of shim, I can send them to you.
1.98 thickness i required @@Arun2Wheels
i ll pay you for that i required 2 shim of 1.98 thickness or close to 1.98
@bombayworkshop2832 see the shims comes in 0.05 mm size figure. You can check. Here you can put a 1.95 or 2.00 mm please contact on Instagram or telegram for payments and shipping details.
I've CBR 150R.. Please let me know where to get these Shims as the same isn't available in nearest service centre.
I can provide these all the parts of CBR250R
@@Arun2Wheels I think shims would be no different in 150's and 250's... I would appreciate, if you could share the part number.. Btw, I'm from Kolkata, West Bengal
@@indrockz92 yes these are same but it comes in different sizes. So you need to measure which size you want.
Bhai cbr 250 ka valve clearance kitna hai? For intake ans exhaust???
See my video on clicking sound at 13:16
aise koi v samjhate nahi ap jaise samjha rahe ho... vaiya mera Fuel Pump Motor hi kharap hay.... me apke wp se...
Great video . I actually spent 10 k in replacing the shims. The service guy kept on telling me that there might be issues with crank, tappet, rocker arm. So much costly.
You have been cheated bro...
Where r u located. ? My bike is sitting dead now. Problem with battery dischrge. Replaced battery . again same while riding. Checked coil. The local guy said to replace coil. The same problem arised. Fed up now. Kept it unattended. Want to rectify the problem economically. Dont want to shell any more authorised service
@@debuyamaha Bro, i am in Mathura Uttar Pradesh.
Hi Bro,
I am in Odisha and dont have a good cbr 250 authorized service center. Seems like I got the same issue. But the nearest will be to go to Vizag which is almost 300 km or to Bhubaneswar which is 180 km. can I travel with this issue? will there be any issue? If I cnt travel then have you check it here with some honda showroom or else may be local technician. pls let me know
Local technician can also do it if he has done engine work of KTM or any liquid cooled bike.
@@Arun2Wheels THANKS Ton Bro... Will check... But can I ride the bike? As I need for daily commute?
@@jennasurya if the noise is coming after some run than it is ok to run but if it is coming from startup than it can create some problems in engine.
@@Arun2Wheels it starts immediately if I switch it on... 😭...will call a technician then ...or may pickup ... Purchased in 2019... Thanks for the information
..many thanks 👍
@@jennasurya you can drive the bikes but not in very high speed only till 65 kmph you can drive don’t rev up more. Ok and no long ride more than 60km in a turn.
Sir 2011 model hai shim size kiya hoga pls sir btaao
Bhai ye measure karna hota hai. Fix nahi hota.
Hi bro
Once we change the shim how long it will last .
Depend on perfect size mesurement if you've perfectly measured the size then it can last approx 12k to 18k KMs. Depends on riding styles. If in fast speed then less KMs.
@@Arun2Wheels Thanks bro
I also own 2011 honda cbr 250r my bike engine also sounds tig tig problem and I hope that I need to change change the sim-tapped.But bro i have questions if i will not change the sim-tapped what will be problem of my engine in future? will my engine will be seized?🤔🤔🤔
Top speed will be down and torque will be also be down as compression will be loose. It can also result in broken rocker arm so don’t wait for longer.
@@Arun2Wheels what will be the cost of engine opening, changing tapped and change timing change in honda service centre?🤔 total parts and labour charge 🤔
@@Arun2Wheels can i use motul fully synthetic 10w 50 1.5 L in my Honda CBR 250r because i always drive fast and my engine become hot?
@@jondebbarma7287 don’t put your bike in service centre for this issue they will make a very large bill. They’ll ask you to change the everything in the cylinder head. So it can cost you approx 10k as well.
@@jondebbarma7287 10w40 is recommended as per the Indian temperatures.
Is shim ka diameter kya hai bhai? mujhe KTM RC 200 ke liye shims chahiye, aur ghar ke paas koi KTM service center hai nahi..
Abhi tumne ek comment kiya tha Jisme tum ek abusing word use kar the right aage se mat karna aur pura padh kar reply kiya karo. Well iska shim ktm me nahi aayega uska thoda over size ka hota hai agar tumhe ktm ka chahiye to mujhe size bata do me tumhe post se bhej sakta hu.
Superb bro...But naya sim ka replacing ka part missing
You mean old shims are missed in video, actually that part of video was missed while editing so was not added in video but you can listen the sound to verify that it was replaced.
If u dnt mind can i share ur video on my cbr 250r group...whr in lot of cbr person discuss on the issue of this bike
Share link only... So the person can reach to me for questions and answers.
@@Arun2Wheels yes I hv shared ur link
@@9604863196 bro i am a new cbr owner. Please share me the invite link so that even i can join.
@Rohit Baburaj Pawar ur whts app num
Sir 4 shim new instal krne se pure sound ajyga kya ?
Ha bhai par aapko sahi se measure karna hoga
Sir 4 shim new instal krne se pure sound ajyga kya
Ha par aapko measurement sahi se karna padega agar wo teek se nahi hua to dikkat bani rahegi.
Sir engine ki packing kit kha se purchase kru .. plzzz sir
Bhai kisi bhi service center se kar lo. Ya packing paper lekar khud bana lo
Bro please tell me where can I get the sim? Cause I'm from nagaland and I've searched kolkata and delhi but still can't get tappet sim
Tell me the size I can prove it to you.
Bro how is the phone holder bar mounted to your bike?
th-cam.com/video/eL3YDQcfWFA/w-d-xo.html
Here is this video.
@@Arun2Wheels thanks bro
Is it necessary to change this part, my bike has done 54k and I don't feel it has any issues.
Then no need to change it.
@@Arun2Wheels update: now it has done 58k and it suddenly lost compression. Bike was not starting at all, I took it to a local garage they worked basically all day on it and finally managed to start it. They also cleaned throttle body.
Now I'm confused what should I do. Is it a shim problem or I need to rebuild engine. I also live in Delhi btw.
@@axel3895 sometimes suddenly stop can be because of a wiring issue specially on Handel Turing point. If you think that it was because of throttle body, so I want to inform you that if throttle body is bad then bike first starts missing not completely off directly. For shim replacement you need to check the shim sound first if it is coming, you absolutely need to replace them otherwise no need. Don’t open the engine without any big reason. One more thing don’t forget to subscribe.
@@Arun2Wheels I was using this bike daily, before that happened. It was not starting you can say basically dead. I called Honda service centre they said they can't do anything about it and I have to bring bike there so I took it to a local garage which has some good mechanics and they said it lost pressure, it lost compression. Now I don't understand what actually happened 😕. BTW I have never changed shims or timing chain and touch 120-130km/hr everyday. Now bike is in running condition but I seriously don't understand, should I go for engine rebuild or just change shims and timing chain.
Brother just join me on Instagram or messenger or telegram so we can descuss in live chat. Links are in description of most videos or you can get in channel about section.
Can u give me exact sizes of shims for inlet and exhaust
The exact size can only measured as it is not same because it is completely based on bike usuage.
@@Arun2Wheels ohkk... And what should be original sizes?? Bcz have buy new shims... So plz give me original size as company recommend.. I'll buy them
It is based on model year. It can be any between 1.1 mm to 1.8
Sir in 2012 model it’s my first time to change shim what size of shim will work
Bro i am planning to purchase a mid 2013cbr150r @43000kms the man is asking 55k is it worthy to purchase it in2020 and @what reasonable price of it's mileage is Decreased then is it possible to inc by maintaining it how to purchase genuine parts at cheap price
Bro i'll suggest not to purchase it. It is expensive as it is old and more driven. One more thing availability of spare parts for cbr150r is limited as it has been discontinued earlier and even not available in neighbor countries like Thailand, Nepal etc so you can face some difficulties in ordering Parts in future. So I'll suggest you to purchase CBR250R because it is an internationally launched bike and currently also available in many countries so Parts are available however it can take some time but you can order.
Please Subscribe...
@@Arun2WheelsBHAI ji thanq very much for you guidance i am a collage student thats why i have budget issues .ya I planned to buy a cbr 250r abs version but as a student & a beginner i want to furnish my hands in cbr i love this bike..
@@Arun2Wheels bhai please through some light on these questions .what is the cost of normal service & maintenance
Of 250r and all necessary parts that needs to be changed (as compared to 150r)and at what condition i.e after how many kms eg.tyre, Air filter ,oil filter, chain, chain sprocket break pads or any other part that needs to be changed frequently or gradually ,if I missed mentioning it .and other parts eg self, lock ,ecu etc.. (as compared to150r)
Also what is the real mileage difference ..btw them I had seen few video I which 150r is givinng @50kmpl
And 250r @43kmpl
and things to do which is helpful in increasing mileage and maintaining good engine condition
Am I able to bear it.😅
Is it good to purchase a 250 cc bike as a beginner
Bro, The part cost of 250r as compare to 150r is approx 130 to 150%. I was planning to upload as your questions are not only yours i am getting lots of same question as you have. So wait till that video.
@@Arun2Wheels Oke desperately ,waiting for it 🙏🙂
Bro bas tensioner change krne se nai hota?
Nahi, wo bas ek afwah hai... Ye actually shim change karne se hi thik hota hai.
More videos banavo on cbr250r
I think lots of topics on CBR250R has been covered in my videos. Rest will be uploaded asap.
Vai upko a sim mila kaha sa ...kha sa order kia up ..plz mujha bolo
Please contact your nearest authorized honda 2 wheeler service centre. They can order it for you. One more thing measures the new shim size first before ordering new.
Bro meri cbr 150r ke engine se kat kat ka sound aa rha tha or power bhi ni de rhi thi to shwroom m dikhaya to usn piston m problm btaya to maine new cylinder kit lgwayi thi uske bd bhi 120kmph se upr ni ja rhi h
5th gear m 120kmph tk chli jati h. Jaise hi 6th use krta hu to 120 s upr ni jati.
Problem head me hai valves ki setting thik karao. Cbr150 140 tak jati hai.
Throttle body k wjh s to ni h ?
@@Arun2Wheels ok bro. Thnx
Nahi use bas clean kara do injector ko bhi.
2.5 for both intake and exhaust?
No you need to measure the size properly. It is not fixed for ever CBR250R.
Shim adjustment krne ke liye kolkata me agr koi h to pls btana mere ko mere cbr 250 me shim prblm kr rha h
Bhai mujhe bas mere baare me pata hai Kolkata to bahut door hai mujhse.
Nobody talks about this problem ever. But problem is shim milta nahi in market. Iska bhi koi link share kardo. Subbed and belled. Thank you brother.
Yamaha FZ25 ke shims bhi lag jate hai.
@@Arun2Wheels mera 2014 end model hai. Size and gap same hai kya previous models like?
HA
@@Arun2Wheels Thank you brother.👍
Bhai mera cbr18500 hogya hai lakin koi sounds nahi aaya 👍...
Tq for this video bro
Your riding pattern is good.
Tell me about the rear bearing of cbr250
96150-63030-10 this is the part number of bearing for rear wheel.
@@Arun2Wheels mein highway pr tha peeche waale bearing se awaaz aane lgi ,bhai size bta do toh mein skf ka le aaunga bahar se
SKF ki bearing thodi wide hoti hai use lagane ke baad bearing seal thik se nahi lagegi aur fir nayi bearing bhi kat jayegi isis liye original lelo.
@@Arun2Wheels purani bearing ke size ki nhi mil jaayegi skf exact same, original konsi company ki hai
@@lavishjha3378 original Honda ki hi aati hai made in Japan. Aur uski life bhi skf ke compare me bahut jayada hoti hai.
Bhai aap ne sim kha se li
Service center se... Please Subscribe...
Sir kya aap muje b cbr 250 ka kaam sikha denge.. meri cbr250 r ka koi acha mechanic nahi mil rha meri city me..
Aap kis city se ho?
@@Arun2Wheels indore se bhaiji
Bhai yeh shim ni mil rha iska ...koi jugaad se kam chalega kya ...koi substitute dusre bike ka
Nahi iska substitute triumph me lagta hai jo bahut mahanga hai aprox 1100 per shim. Agar size pata hai to me send kar sakta hu. Jyada jankari ke liye Instagram, messenger ye telegram par contact ke skate hai.
Bhai shim kaha se liya apne
Thik se size calculate kar ke aapne nearest service center par order kar do.
Bro handle bar ke upar video banao na plz bhai
What kind of video actually want? What kind of video on handle you want?
@@Arun2Wheels handle bar raiser
Sorry bro, I'm not using any handel bar risers. So can't make a video...
Bhai aapki bike kitna kilometer Chala hai??
Abhi tak 18000 KM +
Bro..My cbr is consuming more engine oil and little smoke from exhaust
What could be the problem
Piston rings has burnt out.
Can you plz let me know the cost of changing it
@S K Khan how much your bike has done on road?
20,000kms
@@SKKhan-mp7iz which oils have you used till now.
Nice video Bhai Meri gaadi ka chain tensioner 3000-4000 km chl ke kharab ho jaata hai kya kru
Chain is on replacement stage and you drive very fast without proper lubrication.
@@Arun2Wheels 22000 km hi chli hai gaadi
@@lavishjha3378 it is on end stage replace it soon.
Translates to free tacos after each service with included oil change..
👍🏻
Bhai ab bhi chalate ho ye?
Abhi maine ye bech di hai. Abhi me KTM 390 adventure chalata hu.
Head ki gasket ki price kya he?
88 ₹
Bhai kaun se city me ho aur shims kahan se liye... Maine 2-3 cities me search kiya but nahi mil rahi
NCR se hu.
Bro agar shim cbr ki nahi mil rahi ho toh fz 25 ki shim bhi use kr sakte ho but measurement sahi hona chahiye bas
Really? I don't know about that.
@@Arun2Wheels ha bhai , i am using fz25 shims in cbr 250r
@@priyansusrivastava5623 this is the first time someone really telling me about that.
Apki shop kha pr hai
Mathura.
Packing me description ke liye hai paket
🙂
Sounds like a lifter valve
Meri cbr 250 me 5k rpm pr hi tik tik sound aati hai kya ho sakta hai ?
Kitani chali hai abhi tak over all?
@@Arun2Wheels 78000
@snehalgamit9980 fir to shim dalenge naye aur kuch nahi. Yahi video ko pura dekho aur channel ko subscribe kar lo aur bhi videos hai cbr250r ki isis channel par.
@@Arun2Wheels thanks brother,,2saal pehle se subscribe kar rakha hai bro...
Bhai iske shim ki kya price hai
Ab ₹300 ke aas paas hai.
Bhai Kya hm yeah khud se kr sakte hai technical kaam hai bahut
Ha bhai ye khud se kar sake hai but shim size measurement bahut important hai agar size over ho gaya to rocker toot sakta hai aur camshafts bhi damage ho sakti hai.
@@Arun2Wheels ab sahi hai aapki bike Jo problem thi
@@lavishjha3378 bilkul perfect sound hai.
@@Arun2Wheels jb Meri gaadi mein temperature ke 3 dande aa jaate tb awaaz thodi si change ho jati hai sik sik sik
@@lavishjha3378 If you can send me a video on my instagram then only i can provide you possible resolution.
How much it will costs for rocker arms and shims bruh
Rocker arm is approx ₹ 600 for 1 and 1 shim is approx ₹ 170.
How many shims we want to fix bruh
@@venkatasai5859 4
Bhai meri bike cbr 150 me vibartion hai or smooth ness feel nhi ho rhi kya kru jise vibartion khatam or engine smooth ho jye
Balancer ki timing theek nahi hai.
@@Arun2Wheels isme bhai kitna kharcha ayega or nya pda to kitne ka pdega
@@mujahidraza9482 engine khulega dono side ke cover khul kar theek hoga.
@@Arun2Wheels khi aap crank ki baat to nhi kr rhe ho
@@mujahidraza9482 crank ke saath balancer ki ek timing hoti hai wo set hogi theek se.
Cbr 150 ka bhi ata hai kya brdr
Ha. Aata hai.
I don't understand what is happening here. Please tell me what that issue is so i can tell the mechanic.
This video is regarding shim noise and shim replacement in Honda CBR250R.
@@Arun2Wheels Thank you for replying. I appreciate it. Mine only does this for around a minute on a cold start. After that it runs fine and no noise. Do you think it's the same issue?
If it is only in starting and not after that, it is not an issue but if it is after the warmup and sounds loudly like clicking, it needs to be fix.
@@Arun2Wheels So it is normal for it to do this during warmup?
Yes it is normal. Well what is you bike make and model? And how many kms it has run?
Where did u buyed this
On special order.
Agar change nahi kiye to kya hoga bhai...?
Engine ki performance par imapact high fuel consumption.
Bhai meri gaadi jb thoda ja gadda aata hai na toh usmein khtt ki awaaz aati hai aage se kaise solve hogi
Suspension me se aati hai ya kahi aur se. Agar suspension me se hi hai to thoda oil dal lo CBR road ke hisab se bani hai naki offroad gaddo ke hisab se.
@@Arun2Wheels accha hai suspension se hi aati hai kyuki conset bhi change krwa liya pr awaaz nhi ja rhi
@@Arun2Wheels suspension mein oil bharwaya tha dobara 330 ml tb bhi awaaz nhi ja rhi
@@lavishjha3378 to fir suspension ke andar wala bush check karao wo ghis gaya hai jis se suspension me oil pressure maintain nahi ho raha.
@@Arun2Wheels suspension kaam sahi kr rha hai jhatke nhi lg rhe pr awaaz aati hai jaise kuch metal pr metal kht se pdta hai
Ye dost kha milega ye part mere bick m same sound aa rh ah
This is not fix for every bike it has to measure first before installing.
Information likhni padti he product ki to chode size me nahi aapati he, isliye ye big size use kiya he ki datail likh sake product ki.
You’re right bro no I also know that.
Bhai mujhe bhi karke de do meri cbr me bhi aisa hi sound aata hai?
Aapko ye apne aap karna hoga... me bas help kar sakta hu.
Meko shim kha milega?
Size batao mere pass milega
Apko mai personally msg krta hu
Ye shims order kaha s kare bhai!!
Size batao me ship karta hu.
@@Arun2Wheels number share kroge ap plz apka?
@@ASH_ISLIVE number yaha publicly share nahi kar sakta aap mere Instagram, messenger ya telegram par messages kar sakte ho.
@@Arun2Wheels okyy sounds good
Bhai muje bi sim chahiye kaise milgi Mai Dhundh dhundh ke parshan ho gyaa hu bhai kahi nahi mil rhi h mumbai me ptaa kiya waha bi nahi mil rhi h meri 12 ka modal h muje bi sim Lena kaise milgi bhia sim
Plz reply me
Aapko pahle size batana hoga jis size ke chahiye.
2 mm ka 2 pis and 2.50 mm k 2 pis
Ok but it can take up to 20 to 25 days after payments based on availability of parts as it is a small part. It will come on order.
Bhai jyda English nahi h tell me hindi sorry bro
Total expenditure
But not for me... 🙂