Check the other videos about this Car : EVAP system : th-cam.com/video/f40e-jTIs_4/w-d-xo.html Injectors : th-cam.com/video/uzK52WNTLgw/w-d-xo.html MAF sensor Test : th-cam.com/video/BlRI3aOCBkg/w-d-xo.html Power Steering Pump : th-cam.com/video/McogjgANm5I/w-d-xo.html Alternator Replacement : th-cam.com/video/pvX_Q0U0wGY/w-d-xo.html Check the Playlist for more : th-cam.com/video/BoeXrXZ2TnQ/w-d-xo.html
This was very useful, but the fix was easy to miss in the video. I had just replaced my battery. My inner roof panel worked but the glass roof did not move. All that was need was to close the inner panel on the switch. Then hold in forward direction for 30 seconds. Then both inner and outer glass roof worked. I also fully opened and held switch in open position for 30 seconds for good measure :) Thank You
Thank you so much, this video helped tremendously. I just replaced the sunroof motor in my 2002 C230 Kompressor. I also had to replace the wind deflector hinges. All in working order now!
Thank you for the video. Easy to follow and great information. Looking aat a CLC 200 Evolution with a non functioning roof, so I bought the car. Thank you.
Some tricks, but easy enough to do and probably saves hundreds of dollars. The manual close is important because it most likely will fail open and on a trip where you can't get home to work on it, you close it and don't touch it.
Awesome video. Can you do a sunroof repair video, where you're inspecting the track, and figuring out why the sunroof won't close? This may be more involved, but so many people are suffering through it. I love your videos!
Hi thank you for your videos! I have same model mb coupe. Very helpful, please do you have any idea were yo find the 3 nut rubber gaskets for replacement? Thanks again!
I recently purchased a 2002 when I got it the sunroof was raised on the right side, I’ve checked the motors any time I plug the cord from the motor into the left side of labeled CL that individual motor will work, but neither both at the same time. Could it being stuck have burned my control module ? Or is it not doing it bc something is broken on the trac?
Great video, thanks. In my case the motors doesn't switch when I fully close my glasroof. So the gear overspins and get damaged. I have tried to synchronize. Manually closed the sunroof then connect the battery.. nothing worked. Same problem as before. When I open my glasroof it only opens partwise. Maybe someone knows what to do in this case?
Hello pal, can you tell me what can i do?: the roof is closed on one side, but still opened on the other. Some 2 fingers. Its completely stuck. I tried already to dismount the left motor, but, cant move that. Pleas, im desperate. Thanks in advance.
I've got a C180. They change the batery. Now, I can't open/close sunroof because my cover panels are broken (not the motor but the cover panels themselves are desatached to the motor. The problem is that control just moves the right motor (the one that theoretically moves the panel - but as i say, they are desatached. and opened). So the left motor (the sunroof) never moves. Can i bypass the right motor cover panels, and just use the left motor? How to do it? (Right now i just can open/close the sunroof manually with T25). Thanks in advance
So you mean the motor that openes the sunroof spins but is not connected to that special chain inside the channels ? Sorry , I did not understood well the situation and why you want to bypass one of the motors 🤔 If that chain is somehow broken / it does not move than you must remove the whole sunroof amd find another chain with the "chain compartment " Or maybe those who replaced the battery "replaced " also something from the sunroof 😂 it can happen ..
@@doit_vehicles , the right motor (the one that open/close the cover panels) spins correctly, but doesn't move the cover panels because they are desatached (and is very difficult to reatach by myself. As you say, i should remove all the stuff). Now, the cover are permanently opened. No problem. I just want to know if there is some easy way to open/close th sunroof, because right now, when i touch the controls (up, down, forward, reward) just spins the right motor, but not the left one (the one that opens/closes sunroof). Thank you very much
I see , well you can bypass the right motor by just disconnecting it and try to reconnect it to the motor for the sunroof . I think it might be as simple as to just switch the connectors possition or you might have to increase the leght of the wires .. time consuming but as long as the wires will send the right signal , it will work ! Try to play around with the conectors as there is nothing to brake since the electronics of this sun roof are weird thoug .
@@cpatermi te funcionó bien?? El mío parece que no hace ni un ruido cuando le doy al interruptor, solo se escucha como un leve “click” y no se mueve nada de nada.
Hi and thanks for the helpful video doit_vehicles! I have a question though? My car's back sun shade (backseat area) is not in sync with the front shade. They are supposed to work together right? If so, how would I get the back sun shade to work? Is there another motor for it or could something be missing for it not to work? Your thoughts please and thanks in advance!
Hi ! Thanks and sorry for late reply . Is the back sun shade mooving ? or is just not synchronized ? If they are not syncronized you must remove the whole sunroof assambley and check the wire/chain/belt thing which moves the covers . It is defnetly a phisical / mechanical issue since the front one moves , so it's the matter of taking everything out and see what's going on . Unfortunately I did not made a video about that since I never encounter this issue before .. 🤔
There is a plastic rail to pull it out when it is closing, that plastic rail is broken and the motor still work then the front one goes out and the back one still not work (not going out to cover the glass). You can use hand to pull it out to cover the glass and it will pull back strongly.
My sun glass moves just fine, and the shade does not. I have tried a different motor, and neither move the shade. I have manually moved the shade closed with a wrench, disconnected the battery, and turned back on, but the shade stays in place and the glass continues to move correctly. Any tips.
try to switch the connectors from the shade to the glass and vice versa than try again . Don't remember exactly if that it's possible on this car . Anyway , big chance that the control panel is wrong
doit_vehicles wow. What an interesting thing to try. I will do that today and get back. What’s your thought on the ECU being bad? I mean nothing else is wrong with the car I know of, but If the connectors are the same, it would be worth looking into
Hi ! As far as I know , those bolts come together with the motor and they do not have a separate part number . The best is to buy something similar from a local shop or salvage them from another car ..
Check the other videos about this Car : EVAP system : th-cam.com/video/f40e-jTIs_4/w-d-xo.html
Injectors : th-cam.com/video/uzK52WNTLgw/w-d-xo.html
MAF sensor Test : th-cam.com/video/BlRI3aOCBkg/w-d-xo.html
Power Steering Pump : th-cam.com/video/McogjgANm5I/w-d-xo.html
Alternator Replacement : th-cam.com/video/pvX_Q0U0wGY/w-d-xo.html
Check the Playlist for more : th-cam.com/video/BoeXrXZ2TnQ/w-d-xo.html
This was very useful, but the fix was easy to miss in the video.
I had just replaced my battery.
My inner roof panel worked but the glass roof did not move. All that was need was to close the inner panel on the switch. Then hold in forward direction for 30 seconds. Then both inner and outer glass roof worked. I also fully opened and held switch in open position for 30 seconds for good measure :)
Thank You
Glad you made it and thanks for feedback
Thank you so much, this video helped tremendously. I just replaced the sunroof motor in my 2002 C230 Kompressor. I also had to replace the wind deflector hinges. All in working order now!
I've been searching for help with this very issue, and finally found the answers! Thank you so much, excellent video. Subscribed
Glad to hear that ! :) Welcome to the channel
I've been looking for a video like this for a long time and finally here it is. Thanks, signed up now!
Ordered my gear and planning this repair on Friday. Thanks for the awesome video; I'll let you know how it goes.
That's cool ! Good luck with the project !
How did you go????
Today is 30/12/23... I see your video.. useful... thank..
You are best man for Mercedes. Great. Gretings from Germany
Thank you for the video. Easy to follow and great information. Looking aat a CLC 200 Evolution with a non functioning roof, so I bought the car. Thank you.
This was so hard to find but youre a life saver thank you so much
I am glad it helped
Some tricks, but easy enough to do and probably saves hundreds of dollars. The manual close is important because it most likely will fail open and on a trip where you can't get home to work on it, you close it and don't touch it.
Thank you, your video is very helpful. Great Job
Muy buen vídeo , y detalladamente explicado , ya mismo me pongo a reparar mi compressor
Que bien
A GREAT EAASY TO FOLLOW VIDEO, THANK YOY. SAM
Awesome video. Can you do a sunroof repair video, where you're inspecting the track, and figuring out why the sunroof won't close? This may be more involved, but so many people are suffering through it. I love your videos!
Its actually gonna come a video in few weeks ;)
@@doit_vehicles Can you tell me how to manually close a 2016 C300 sunroof.
I can’t find the two holes to close it.
Thank you for your help!
Thank you, you saved my vacation!!!!!! Thank you 🙌🏼🙌🏼🙌🏼🙌🏼😁😁😁
Hi thank you for your videos! I have same model mb coupe. Very helpful, please do you have any idea were yo find the 3 nut rubber gaskets for replacement? Thanks again!
Obrigado pela ajuda, foi muito util a sua informação.
I recently purchased a 2002 when I got it the sunroof was raised on the right side, I’ve checked the motors any time I plug the cord from the motor into the left side of labeled CL that individual motor will work, but neither both at the same time. Could it being stuck have burned my control module ? Or is it not doing it bc something is broken on the trac?
From what you say if the sunroof is able to move when either moror is on , it looks like the control module is wrong
Great video, thanks. In my case the motors doesn't switch when I fully close my glasroof. So the gear overspins and get damaged. I have tried to synchronize. Manually closed the sunroof then connect the battery.. nothing worked. Same problem as before. When I open my glasroof it only opens partwise. Maybe someone knows what to do in this case?
I am glad u did this
Can u open the sliding sunroof with out the blind working?? Is there a way to just open the sunroof if the blind dosnt work??
Very good job, very nice!
Is this called the Upper Control Panel control module? As I can't figure out what it is, but getting error codes for that
Hi, can you advise how to check the overhead dome to make sure the control panel is not working.
Do I check for continuity on the white wires?
Thank you
Hello pal, can you tell me what can i do?:
the roof is closed on one side, but still opened on the other. Some 2 fingers. Its completely stuck. I tried already to dismount the left motor, but, cant move that. Pleas, im desperate. Thanks in advance.
Very helpful video , thanks
You're welcome!
Thank you❤
thank you very much, excellent video
Salut, oare ma poti ajuta cu o intrtebare legata de un motor de la trapa? Mersi
I've got a C180. They change the batery. Now, I can't open/close sunroof because my cover panels are broken (not the motor but the cover panels themselves are desatached to the motor. The problem is that control just moves the right motor (the one that theoretically moves the panel - but as i say, they are desatached. and opened). So the left motor (the sunroof) never moves. Can i bypass the right motor cover panels, and just use the left motor? How to do it? (Right now i just can open/close the sunroof manually with T25). Thanks in advance
So you mean the motor that openes the sunroof spins but is not connected to that special chain inside the channels ? Sorry , I did not understood well the situation and why you want to bypass one of the motors 🤔
If that chain is somehow broken / it does not move than you must remove the whole sunroof amd find another chain with the "chain compartment " Or maybe those who replaced the battery "replaced " also something from the sunroof 😂 it can happen ..
@@doit_vehicles , the right motor (the one that open/close the cover panels) spins correctly, but doesn't move the cover panels because they are desatached (and is very difficult to reatach by myself. As you say, i should remove all the stuff). Now, the cover are permanently opened. No problem. I just want to know if there is some easy way to open/close th sunroof, because right now, when i touch the controls (up, down, forward, reward) just spins the right motor, but not the left one (the one that opens/closes sunroof). Thank you very much
I see , well you can bypass the right motor by just disconnecting it and try to reconnect it to the motor for the sunroof . I think it might be as simple as to just switch the connectors possition or you might have to increase the leght of the wires .. time consuming but as long as the wires will send the right signal , it will work ! Try to play around with the conectors as there is nothing to brake since the electronics of this sun roof are weird thoug .
Thank you very much. It works well! :-)
@@cpatermi te funcionó bien?? El mío parece que no hace ni un ruido cuando le doy al interruptor, solo se escucha como un leve “click” y no se mueve nada de nada.
I don't understand. Have you changed the plastic wheel or what?
a master class thank you
Man really thanksfull🙏🏽
Genius 🎉
Thanks brother great video 🙏🏻🙏🏻
👌👍
Excellent! Thanks
Hi and thanks for the helpful video doit_vehicles! I have a question though? My car's back sun shade (backseat area) is not in sync with the front shade. They are supposed to work together right? If so, how would I get the back sun shade to work? Is there another motor for it or could something be missing for it not to work? Your thoughts please and thanks in advance!
Hi ! Thanks and sorry for late reply . Is the back sun shade mooving ? or is just not synchronized ? If they are not syncronized you must remove the whole sunroof assambley and check the wire/chain/belt thing which moves the covers . It is defnetly a phisical / mechanical issue since the front one moves , so it's the matter of taking everything out and see what's going on . Unfortunately I did not made a video about that since I never encounter this issue before .. 🤔
@@doit_vehicles OK thanks for your input. I really appreciate it!
There is a plastic rail to pull it out when it is closing, that plastic rail is broken and the motor still work then the front one goes out and the back one still not work (not going out to cover the glass). You can use hand to pull it out to cover the glass and it will pull back strongly.
My sun glass moves just fine, and the shade does not. I have tried a different motor, and neither move the shade.
I have manually moved the shade closed with a wrench, disconnected the battery, and turned back on, but the shade stays in place and the glass continues to move correctly.
Any tips.
try to switch the connectors from the shade to the glass and vice versa than try again . Don't remember exactly if that it's possible on this car . Anyway , big chance that the control panel is wrong
doit_vehicles wow. What an interesting thing to try. I will do that today and get back.
What’s your thought on the ECU being bad? I mean nothing else is wrong with the car I know of, but If the connectors are the same, it would be worth looking into
Thanks !
only one cover opened, the one behind, what can i do ?
I have just parked my car wih the shades closed but i can not close the glass...hope it wont rain tonight
😂 try to close them manually
If the lights work but no sound of the sunroof. You think the panel is the problem
Test the motors . The lights are independent of the sunroof
Really thaaanks !!!!
can you please send me the link of the parts
excelent, coments
CAN U DO THIS VIDEO FOR THE W211?
It will come something soon ..
@@doit_vehicles did you make a w211 version of this video?
It's same panoramic for W211
Thanks NAMBER 1 🌟🌟🌟🌟🌟👍👋
👋👌
urgently !! plz where are those washers and bolts sold ????
Hi ! As far as I know , those bolts come together with the motor and they do not have a separate part number . The best is to buy something similar from a local shop or salvage them from another car ..
I need a glass motor I could hear the plastic gear clicking on my car
Και εμένα έχει κολλήσει το κουρτινακι ανοιχτό. Από το κουμπί το μοτερακι δίνει εντολή αλλά δεν κλείνει.
I hear klicking in both motors.....
Awesome :)))
Should of just reset it
Thank you😊
You're welcome 😊