I just received my F2 a week ago and I'm pretty pleased with it. I agree the dust collection is not as good as I had hoped, but compared to what I've been using (a craftsman from 1960) I'm ecstatic! I'm still tuning it in and getting setup the way I want it. But, right now I have absolutely no regrets with this purchase.
I, too , pulled the trigger on the Laguna Fusion F2 tablesaw in August 2021 thanks to your "Why I chose Laguna over SawStop Video". I concluded (almost) identical findings within days of startup. As a newbie woodworker the Laguna Fusion F2 is a quality build but the dust collection is disappointing...so much so that I upgraded to the Shark Guard and am researching an overarm solution that will fit my beginner skill set. Thanks to Travis and Shop Nation I see a path forward. Keep up the inspirational guidance.
I really appreciate how thorough and honest you are in all your videos, but especially your reviews. You don't ramble, but I feel like you hit all the important aspects. As a DIYer, I appreciate the time and effort you put into your videos. Well done.
Very much appreciate the review, Travis. I got my F2 over the summer and unfortunately due to work I have had very little time to run it through its paces. I actually discovered your initial video of the F2 vs. Sawstop after I had already ordered my F2, and I came to the same conclusion then that you did, that although the Sawstops are very nice, pricing it out put it at about double the cost of the F2. Now with this review I’m glad to see that I can look forward to getting more time in the shop with my F2 and getting it running properly (and hopefully mitigating some of the dust collection and fence issues). Also very much looking forward to building a fence caddy for it that a certain TH-camr made a great video on…
You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice th-cam.com/users/postUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.
I’ve been watching an reading reviews (for weeks now)…pretty sure there is no one perfect saw! But, you make some strong points and comparisons to the SawStop. The only other saw that seems to get consistent great reviews are the Dewalts! I’m just a DIY’r setting up a shop in my garage that wants a good reliable (hopefully accurate tablesaw!). I had almost ordered the Shop Fox Hybred, but I think now I might just go with the Laguna F2. Little more money but seems an overall better machine! Thanks!
I see a couple comments on the fence deflection. A year or so ago i watched a video by Felder. The fence is suppose to flex as a safety function to help avoid kick back if the wood has any tension in it. So long as the fence does not deflect where the saw cuts the wood you are good. You should never be putting laterial forces on the wood after the saw anyways. Hope this helps ppl running away from european style fences. They do the same on jointers and any machine with these style fences.
I have to disagree here. No matter where the fence deflects it is going to impact where the saw blade is. If the fence flexes out, due to you applying to much lateral pressure, what happens when you ease up on that pressure 1/2 way through the cut? The fence is going to push the work piece into the blade. This is not good. Flex like this on saw fence is bad. The Jet version of this saw is a better option. It has the same internals as it is basically the same saw with a better fence system. There are versions with and without cast iron table extensions, but it does not come with the overhead DC (gimmick). Cast iron extensions are overkill on these types of saws IMO. They are important on big old heavy saws that had a lot of vibration. The weight helped dampen the vibration. These new saws have no vibration, so it is overkill. Though, some stamped extensions are garbage, so just make your own out of melamine, or plywood. I do agree that you should not be putting that much lateral force into the fence. A lot of woodworkers are guilty of this. However, when doing large sheet goods it is difficult not to. My Shop Fox W1837 came with a similar fence. I bought a set of 2x3" steel rails on amazon (open box) and got the Super Cool Tools fence. What a great upgrade.
I purchased a saw stop about 2 1/2 years ago, the dust collection is excellent with minimal accumulation in the cabinet after months of use. Regarding the deflection of the fence, I think the main concern would be that there is no deflection up to the point where the material is actually cut by the blade. After that poin there shouldn't be lateral force applied to the fence.
Even the very best Biesmeyer style fences will deflect at the end which is just inherent in the design because it is only clamping at one end and the leverage is applied to the opposite end. Thank you for the review. I have been considering this saw for awhile. Where I am at in Southern Ontario Canada the Sawstop PCS is over $4000 which is too much for a hobby.
Great Job! I have been waiting on the review. Have dewalt contractor saw currently and will definitely be in the market for the laguna F2 in 6-9 months. As always great production! Thank You!
Thank you for providing your content. I have a Laguna PX12 planer and love it. I am a hobbyist woodworker and have a limited budget and the Laguna PX12 works well for me. Mine has a prototype cutter head and it works well with hard maple, mahogany and walnut, the wood species I usually work with.
I enjoyed the video breakdown of pros and cons. Great job and honest reflection in your presentation, I didn’t feel there was a conflict of interest with your full disclosure. Im a professional woodworker. I’ll be in the market for a new cabinet table saw this fall as will be selling my Delta cabinet saw and moving to a different state. That said, the Delta has practically same fence and I love it. It’s safer than the Biesemeyer type fences when the blade guard is properly in place. It’s one of the reasons I’m interested in the Laguna. I never had deflection issues with the Delta fence. I will reuse my Extractor overhead 4” rigid port over the saw blade, so better airflow over the blade and guard has larger footprint to capture more dust then the Laguna’s paltry ‘free’ dust port. Saw dust collection is my number 2 priority. That said, I’ll be looking at the Fusion 3 model, now $3K. Taiwan made is usually much better than China made, so not a problem for me.
Great review Travis. I bought the F3 and have been really happy with everything EXCEPT the dust collection. In short, it's horrible, however, I've never found a table saw that has really good collection. All in all, they're great saws and would definitely recommend to anyone looking into a table saw purchase that they look hard at this series of saws.
Thank you for the video, my 30+ year old craftsman finally pooped out on me and I bought the fusion 2, after watching your vid, and love it, its so quiet my wife says she doesnt her it from her office while Im making dust. Keep those great vids coming.
Great review Travis. Maybe Laguna will work on some of the "not so good" things you talked about. Unless the saw is encased in a vacuum, I haven't seen any table saw that is great at dust collection. Just part of our hobby. Thanks for all your honesty.
I agree with your assessment. I have the previous version of the F2 (no DRO). I converted mine to 220 to free up space on my 120 circuits. To increase suction inside the cabinet I took off the dust collector connection from the cabinet and drilled out next to where the hose on the inside connects. This, in addition to taping over any other holes in the cabinet, has vastly improved my dust collection, even without using the over blade setup. I need to find a small blast gate so I can isolate the over blade hose if I'm not using it to make it quicker to isolate. If you happen to be able to 3D print one, I would buy it from you!
As a woodworker of over forty years, I bought the version of the F2 before this version. I needed a saw with a small footprint. That said, you are correct that the Laguna has some of the features that much more expensive saws have. My fence version has no deflection and I have consistently used my fence for many months and it and the measurement scale are still right on. Dust collection, I put a 4x6 oval hole in the cabinet and plugged a 4 inch hose to it. That solved the problem , and it one of the few Laguna does have trouble with.
Good review. Today I went to Rockler. Viewed the F1, F2, side by side. I am sold on the F2. It’s exactly the size and quality I want. Thank you for getting it to my attention via your review. Please maintain the no nonsense forum you have with your videos.
Fabulous as usual Travis. Thank You- I've been eager to see what you thought of it. I ended up going with Harvey due to ol' Mr. Nubs over there. Thank You and keep up the fine work.
I got the sawstop for the insurance. But it really is well made with a beast of a fence (I upgraded it from stock version). I think Laguna would need wider wings to withstand the moment arm that's being created. And bracing for the fence itself. But as you said, at half the price (or more), some compromises had to be made.
Thanks for the review. I have an older shop Smith and an older craftsman saw. I have been looking to replace the craftsman for a newer saw. The craftsman I am going to turn in to a dedicated dado stack saw. That is due to the craftsman not have some of the current safety features. Thanks once more for your review.
Thanks for giving the overall dimensions. Something that is very difficult to find for nay saw on the internet. 1.5 car garage, even dedicated as a shop, can't do that width, and still allow me to be a mechanic too. Thank you. Thanks for all the videos, and the high quality content.
I looked at the fusions today. Measured them. The f1 is 31 1/2 in front to back. 59 in left to right with the rails being a big part of that length. The F2 is same front to back and left to right it’s 67 in. Once again the rails are a big part of that size.
I just got my F2 in. Love it, except a few things. One I noticed is the blade tilt. I can only get it to 44.8 degrees. (checked against my little square digital gauge as well). I'm guessing that's something I will have to adjust inside... I just don't have the time right now to tweak things. I prefer they worked "out of the box". That over the arm thing is cumbersome and the "teeth" dig into the wood. I doubt I'll use it... so now i have to plug the smaller port down at the bottom by the 4" or I lose a bunch of suction. The tool caddy on the side of the saw is the same as from a few years ago, but they changed its placement and the mitre gauge slot is now blocked by the handwheel. You have to stick the mitre gauge in from behind now and it sticks out of the back, making it harder to have an outfeed table butt up to the saw unless you make a space for it. Still a way better saw than what I had.
I recently bought the Fusion F3. I had the same issue with the fence deflection until I squared the top to the blade, and then squared the fence. Now that everything is dead nuts square, the slight potential for deflection doesn’t impact accuracy of the saw. That said, if the saw isn’t properly tuned, the deflection of the fence will contribute to further inaccuracy of your cuts. For anyone that buys this saw, buy a gauge and tune your saw. It is well worth the small investment in time and additional money to get the best performance out of your saw.
Appreciate the review both good and bad. Currently editing my initial review of my Delta and nodded along when you were talking dust collection on table saws.
Great video, Travis! I actually bought an F2 several months ago after watching your Saw Stop vs. Laguna video. Like you, I think it's a fantastic saw for the price, and I also have the exact same grips that you have (mainly the dust collection). After all is said and done, I'd buy the same saw again, so thanks for making that comparison video - it really helped me make my table saw purchase decision. Love your channel, man!
Instead of comparing to a Sawstop, I would be interested in your thoughts on this compared to your old delta. I`ve got a delta 36-5100 with the cast wings and I am very happy with the performance of that saw for the money.
Thank you for the Review. I bought one because of your introduction to it after you bought yours. I love it. I bought mine after you bought yours and didgeridoo the Digital Readout. Huh.
I've had mine for about 3 months agree 100%. One thing I'll add is that my fence was dented upon arrival and they sent me a new one no questions asked. Only it was a different fence, no high/low detachable thing, it's all one piece and now my measuring line doesn't line up with the ruler on the table. It's off by a perfect 1.5" so it's not that bad. Idk if that's good or bad but thought I'd add it.
My Sawstop professional 3hp 220v doesn't collect dust from the overhead very well either. It is better than nothing but far from perfect and it depends on what you are cutting. It is however very sturdy and easily adjustable and swings out of the way if necessary. The lower dust collection does work very well. Your tip on closing up the angle adjustment hole is a good one so thanks.
That deflection looks pretty large. I just tried the same experiment on my Lowes Delta tablesaw, and it doesn’t seem to deflect that much. Three places that it could be moving… the front rail is flexing, the rail to fence joint has some play, or the fence is flexing. Any flexure in those beams (the rail or the fence) would indicate, to me, a serious error in design. I would tend to be more forgiving of the joint, but still… I’d be inclined to replace that fence with the Delta system, which is available with both rails online, assuming it fits. Overall, that still looks like a good option if the comparable Sawstop is out of someone’s range. Thanks for the review! Love the channel!
Very nice review. I'd love to see you check out the Harvey Alpha series, too. Stumpy Nubbs recently got one and their 2hp 36" rip capacity model is frequently on sale for $1,800 right now. Again, it's one that comes with all the features included. I built out a SS contractor saw on their website with the capacity, dust collection, cast iron wings and mobility and it was about a $1,600 difference. That's not even looking at their cabinet saw models.
In regards to that 220v upgrade, it's a joke. I bought it shortly after getting the saw. It didn't have any instructions with it at the time and support couldn't point me to anything. The strain reliefs they used are impossible to remove. Support suggested I just take the old switch off and put the new one on. You still have to remove several unremovable strain reliefs and you still have to replace the power cord. At that point, you the only old part left is the cable from the switch to the motor. I was able to get my money back for it. I also asked support about adjusting the blade to the fence. You have to loosen some screws, but the images were not clear on where the screws were and I couldn't match it to anything on my saw. Support basically said to open it up and figure it out myself; that it would be obvious.
I have just ordered a fusion 2 from Charnwood at a fantastic price. I was after a fusion 1, which is out of stock Uk wide, but have now bought the fusion 2. It seems Charnwood are offering the f2 at a brilliant price to those who are after the f1. There are lots of distributor issues with Laguna at the moment. Charnwood were the UK distributors but are no longer it seems. The baton has passed to Axminster who will only be selling direct so an immediate loss of competition and no date for resumption of sales. Not many f2 left on this deal so if you were interested in the f1 give them a call
The deflection could be caused by too many parts that make up the fence "frame". By that I mean that the "head" that slides and locks on the rail is attached to the " fence holder" that the sliding fence attaches to. That's two different parts with a mechanical connection. (bolts, pins, rivets?). I would assume that the head locks tight and doesn't move. But there is an attaching point from the head to the long square frame that could be a point of movement. In the Delta Unifence the locking part on the rail and the frame that the sliding fence attaches too is cast as one piece. Mine is 25 plus years old and is rock solid. Also another advantage of the Unifence is that the sliding fence can be used on both sides of the blade. It's my understanding that the Laguna fence can only be used on the right side of the blade. Am I wrong about that? Other than that, the saw looks like an excellent machine for the price. I don't think I would let the fence keep me from buying one if I were in the market. Have you found the 1 3/4 horse motor to be enough?
It appears that the fence could benefit from more rigidity. I know they have a fusion F3, however it does not appear the fence is any more ridged. When I decide which cabinet saw to upgrade to I am hesitant to pick Laguna for this reason.
So catching up here as it is 2023 almost 2024. I recently acquired a Fusion 1 that was being sold due to moving. I purchased it for $400. While this was an amazing deal as it was rarely used I got it home and found that the dust collection on it was clogged from thin pieces was lodged to the bottom of the dust collection. On clean the inside cabinet to find that the hose from the 4” was reduced to a 2 1/2”. When the blade is at the lowest in the cabinet it kinks or bends and the hose is flimsy. The length is necessary to raise up with the blade height. The bracket that holds the wrench and miter tool comes off and is a hole into the the cabinet that i sealed off with a small thin tin diamond plate piece cut to size and the screws will not accommodate much more that that to put the bracket back on. The panel the covers the motor also holds tons of dust and builds up. I covered the hole for the overhead hose to add more suction to the saw itself. Still a good saw! And had I not found this deal I would have bought one anyway. Great review! Keep it real and don’t forget to keep some mix and builds in your videos.
Agree with everything here. I have the exact same saw only an older version I picked up off of Craigslist for 700 bucks, which was a steal since the guy never used it and look brand new. The dust collection does suck, and it does accumulate in the cabinet, like you I have not made those modifications to it yet, simply cause I work so much, but it is in the plans. Me personally any large sheet goods gets cut up by the Makita track saw, for me in my small space it’s safer & the accuracy of the track saw is amazing. So that’s not too much of an issue with the fence, a lot of what I do is small work on the table saw. Being about 12 years old or so it will seriously not only pass a nickel test, it will pass a dime test, and both tests were conducted cutting a 2” piece of Indian rose wood. I was actually amazed by this. It has actually been an extremely wonderful Saw to use & have in my garage & I would recommend it too!
I really appreciate your review...this saw is one of three I'm looking at buying in the near future and your information helped a great deal. As a side note, I'm interested in where you bought (or made?) that fence caddy? I would love to get one! Thanks
The deflection on the fence is not really an issue. As stated below, in a very good comment, it's an aid to avoid kickback. I have never thought of that, but that is very well thought of. But also, don't forget, the second half of the fence is absolutely useless. As a rule of thumb you should set you fence length to be 45 degrees back from your saw blade beginning. But you could genuijust have the fence end at the exact point the blade begins and still have a good cut. On my 4HP SIP saw the fence locks front and back so I always without fail, make sure that the back of the fence is .5-1.0 mm further away from the blade than the front. Never had kick back and hopefully I never will. Doesn't seem to affect the dimensional accuracy either so I'll continue. Sorry for the long comment. Do you find the motor on that Laguna to be a bit underpowered?
Great review bud, thanks. I went with the Harvey table saw at the same time you got the F2. Loving it, and the dust collection line is a bit more robust. Same issue with a very similar fence though.
Thank you for all your great content. You organize the information and present it in a way that makes it very easy to get all of the information. Sorry, you might want to check your sponsor link in the description, you added an extra "e".
Great review man!! 👏 BUT... after everything you have stated about this machine, it's safe to say that it's not really in the same class as SAWSTOP and doesn't really compare, it does some things well, but that fence deflection is definitely a deal breaker for me. SAWSTOP is expensive as hell, but here's the solution, use a lesser table saw for a few years and start saving money, the lesser table saw will get you by in the mean time and then by the time you have the money saved you'll be very enthusiastic and ready to make the switch, it doesn't have to be a SAWSTOP either, but it doesn't have to have a perfectly flat surface and a perfectly square and accurate fence with ZERO deflection!
Thanks a lot for the 1yr review and your no-nonsense approach is very refreshing. The same F2 was on my final-two list when I was looking at upgrading from my almost 5 yrs old Ridgid R4512. Your comparison with the SawStop was IMHO spot on. I went with my other option, the Harvey HWL110LC-36P. I won't go through a detailed comparison, that would be hijacking this thread. Just to say the Harvey addresses a good deal of your like-not-so-much points. Stay safe and think about all the hot-dogs you're saving by not having gone to the SawStop side of the Force ;-) If interested we could do that comparison remotely? NB my garage is WAAAYY messier than yours.
@@kp2four Between those 2, definitely the Harvey. Between the F3 and the same Harvey, that would be a much more nuanced decision. Again, I don't want to highjack here, so I'll leave it at that.
Watched your initial review and this one again. I bought the 14-12 bandsaw primarily to resaw lumber. I like everything except the 4" dust collection port is over-sized - that is, my 4" dust hose did not / will not connect to the saw. Solved the issue with a 4" dust hose connector and also a 4" rubber connector. Now my dust hose from the cyclone connects as it should [ plug and play. Not convinced that the $600 difference between the F1 and F2 is worth the money. The main difference is the additional 1/4 hp. Is the juice worth the squeeze? Love your honest reviews.
F1 owner here. Shop equipped with small dust collection system. The interior hose on the saw and the port restriction were removed. Still mediocre dust control. I finally removed the shroud from around the blade and collection is much improved. The shroud was redirecting dust out the top due to airflow not reaching the blade.
Fix your fence problems by getting a 2x3" rail kit (or making one) and getting a Super Cool Tools fence. They are very nice. Also, I still disagree that this is equal to a Saw Stop. They just are not the same class of saw. Maybe close to the Saw Stop Contractor saw, but not really the same either. The Fusion is more of a lightweight cabinet saw, where the Saw Stop is more of a medium weight cabinet saw. The Fusion F2 is a rebranded / different version of the Jet Proshop. You can not say the Jet Proshop is in the same class as a Jet Xacta, which is what you try to do by saying the Fusion is equal to a Saw Stop. The Jet Proshop is in the same class as the Fusion and the Jet Xacta is in the same class as the Saw Stop. That is not to say it is a bad saw for the $. I just do not want people to get the wrong idea here.
I see a lot of comments about fence deflection. All fences of this style, where the only lock is on the rail at the front of the table, is going to have some deflection. There is not much of a way around it for this type of fence. The fence that came on my old Delta locked at both ends of the fence. But it was replaced when I made the table wider to accommodate plywood sheets. I went with a Vega fence and system. Minimal deflection and the only time it's an issue is when someone is horsing around a sheet of plywood on it. But used properly it's straight as an arrow.
Ok, looks like a good professional cabinet table saw. You probably should have gown with a Harvey. That's what I have and Am VERY Happy with this device. 3 things you dislike about your Laguna, Harvey kills. Worthy of a Change Home Improvements
Actually a question. Did you switch to 220 and did it really make it run better? Do you have a link for the magnet for deflection or consider any other method?
Would like to see you build an extension table for this saw, so I can copy your design and execution of course. I have an older version of the F1. Thanks.
I have used the laguna table saw, and I think they cheaped out on the front rail of the fence, as it’s made out of aluminum, not steel. Even the $650 delta saw has a steel front rail! Their saws are pretty damn good, but aluminum is a very soft metal, and having the fence clamp down on that is, well, poorly designed… I now use a sawstop, and that fence has no deflection at all, as the front bar is steel. I haven’t seen any other cabinet saw besides the laguna use an aluminum fence bar. Usually jobsite saws have aluminum bars… I am disappointed about this, and would not classify this to be on par with a sawstop, grizzly, or jet, as this was a major part they really skimped out on the quality. I upgraded my old one a while ago with a delta fence, and it’s so much better! But you gave honest opinions, and actually gave useful information about the saw. This was a really good video!
Hi Travis, can you please explain how if you've had this saw for a year and your original video the saw didn't have the digital readout and this video it shows a saw which has the digital readout? I know you said you got a discount, but did you get a discount on 2 saws and get rid of the original one or did you somehow get one of them free?
I have an old Delta Unisaw with the Unifence. My issue with it is the fence loses its square to the blade , check it once a months. easy to adjust The other issue with the old saw, NO Riving knife. I made Zero clearance inserts with a spitter. Works ok but rather have the real deal. Oh yah one thing. Horrible dust collection. I wear a mask anyway. Saw dust in the lungs is not good. Good review BTW. Gonna stay with the Delta. with a sharp blade it cuts just as well as any other table saw.
I've only had mine a short time but I like the fence. I does deflect if you force it but there isn't normally pressure past the blade. The fence does not misalign or move during use. It moves and adjusts easily. My main issue is with the dust collection. I would appreciate any ideas from someone that has used the saw. My old Craftsman contractor saw with a DIY system collected dust better. The onboard tool holders are nice but are nothing special.
Appreciate the review Travis. Dealing with the little things you mentioned on a daily basis would have me seriously second guessing choosing the F2 if I did so. Fence and DC are two very important factors of a good table saw. My current saw, a steel city, has a few annoyances that didn't seem big at the time, but after a few years of use, I hate that saw with a passion. Sawstop will be the last saw for me, where the only annoyance will be the bigger upfront cost.
Have the F1 and I would say there are similar positives and negatives. Honestly, the over-blade dust collection is a joke, but otherwise I’m super happy with my saw.
Purchased my f2 because of your original video. Would love to know if you’re going to sell a product that helps with the suction of the dust collector (cover for the open space by the front wheel)
Hi Travis. For the dust collection issues, would using thick magnet sheet (used for contractor vehicle signage) be an easy way to plug the arbor tilt hole? "Peel - Tilt - Seal"?
When your first video came out on this saw I don't recall the digital gauge. Just curious if they sent you a new cabinet? Btw I got the f2 and will be getting it delivered this week. Thanks for the great content.
Can’t you tighten the fence so it doesn’t deflect? I have a Craftsman 90s-era cast-iron contractor saw and I noticed the back edge of the fence was deflecting a lot, but after I tightened and tweaked the fence adjustments, it no longer deflects.
The front of the auxiliary guide should be a maximum of 10 mm beyond the point where the saw blade cuts the wood to its full height. If the auxiliary guide extends further, the risk of the workpiece getting stuck between the saw blade and the auxiliary guide increases. And futher more you will have less deflection
You can put a 3mm strip of something at the end of the cast iron table and wheel at the end of the fence will bump into it making it solid and wont move a bit. I also noticed the same problem with the fence and this is so simple that Laguna should actually do this instead of me.
Hey just wondering I have enough money saved to buy your old delta table saw but do you think it’s worth it to keep saving and get your laguna F2. I have a contractor saw right now and I’m not a professional and I don’t plan to be I just wanted to hear your opinion on delta vs laguna and is it worth the extra money?
I also have the F2, however mine must be slightly older than yours because it does not have the digital gauge, other than that it appears identical. I had a ton of issues with the "euro" fence, it was basically twisted it was out of square to the left at the front, and out of square to the right at the back and let to some very poor cuts. They ended up sending me an older, standard style fence to replace it (free of charge), just unfortunate because now the tape measure doesnt line up anymore lol
![[ไฮไลต์] แบดมินตันหญิง ไท่ ซือ หยิง vs เมย์ รัชนก อินทนนท์ รอบแบ่งกลุ่ม | โอลิมปิก 2024](http://i.ytimg.com/vi/LUCG0H5qkpQ/mqdefault.jpg)
I just received my F2 a week ago and I'm pretty pleased with it. I agree the dust collection is not as good as I had hoped, but compared to what I've been using (a craftsman from 1960) I'm ecstatic! I'm still tuning it in and getting setup the way I want it. But, right now I have absolutely no regrets with this purchase.
I, too , pulled the trigger on the Laguna Fusion F2 tablesaw in August 2021 thanks to your "Why I chose Laguna over SawStop Video". I concluded (almost) identical findings within days of startup. As a newbie woodworker the Laguna Fusion F2 is a quality build but the dust collection is disappointing...so much so that I upgraded to the Shark Guard and am researching an overarm solution that will fit my beginner skill set. Thanks to Travis and Shop Nation I see a path forward. Keep up the inspirational guidance.
I really appreciate how thorough and honest you are in all your videos, but especially your reviews. You don't ramble, but I feel like you hit all the important aspects. As a DIYer, I appreciate the time and effort you put into your videos. Well done.
I Agree
Super helpful video, appreciate the no-BS, straight up, authentic way you present your opinion and information.
I love your reviews and your methodology behind when you do them.
Thanks, the Fusion line is for sure on my list for consideration.
'Preciate the honesty and transparency in your reviews, Travis. Great info. Thanks for what you do!
Very much appreciate the review, Travis. I got my F2 over the summer and unfortunately due to work I have had very little time to run it through its paces. I actually discovered your initial video of the F2 vs. Sawstop after I had already ordered my F2, and I came to the same conclusion then that you did, that although the Sawstops are very nice, pricing it out put it at about double the cost of the F2.
Now with this review I’m glad to see that I can look forward to getting more time in the shop with my F2 and getting it running properly (and hopefully mitigating some of the dust collection and fence issues). Also very much looking forward to building a fence caddy for it that a certain TH-camr made a great video on…
You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice th-cam.com/users/postUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.
I’ve been watching an reading reviews (for weeks now)…pretty sure there is no one perfect saw! But, you make some strong points and comparisons to the SawStop. The only other saw that seems to get consistent great reviews are the Dewalts! I’m just a DIY’r setting up a shop in my garage that wants a good reliable (hopefully accurate tablesaw!). I had almost ordered the Shop Fox Hybred, but I think now I might just go with the Laguna F2. Little more money but seems an overall better machine! Thanks!
I see a couple comments on the fence deflection. A year or so ago i watched a video by Felder. The fence is suppose to flex as a safety function to help avoid kick back if the wood has any tension in it. So long as the fence does not deflect where the saw cuts the wood you are good.
You should never be putting laterial forces on the wood after the saw anyways.
Hope this helps ppl running away from european style fences. They do the same on jointers and any machine with these style fences.
I have to disagree here. No matter where the fence deflects it is going to impact where the saw blade is. If the fence flexes out, due to you applying to much lateral pressure, what happens when you ease up on that pressure 1/2 way through the cut? The fence is going to push the work piece into the blade. This is not good. Flex like this on saw fence is bad. The Jet version of this saw is a better option. It has the same internals as it is basically the same saw with a better fence system. There are versions with and without cast iron table extensions, but it does not come with the overhead DC (gimmick). Cast iron extensions are overkill on these types of saws IMO. They are important on big old heavy saws that had a lot of vibration. The weight helped dampen the vibration. These new saws have no vibration, so it is overkill. Though, some stamped extensions are garbage, so just make your own out of melamine, or plywood.
I do agree that you should not be putting that much lateral force into the fence. A lot of woodworkers are guilty of this. However, when doing large sheet goods it is difficult not to. My Shop Fox W1837 came with a similar fence. I bought a set of 2x3" steel rails on amazon (open box) and got the Super Cool Tools fence. What a great upgrade.
I purchased a saw stop about 2 1/2 years ago, the dust collection is excellent with minimal accumulation in the cabinet after months of use.
Regarding the deflection of the fence, I think the main concern would be that there is no deflection up to the point where the material is actually cut by the blade. After that poin there shouldn't be lateral force applied to the fence.
That's what I was thinking... 👍
Even the very best Biesmeyer style fences will deflect at the end which is just inherent in the design because it is only clamping at one end and the leverage is applied to the opposite end. Thank you for the review. I have been considering this saw for awhile. Where I am at in Southern Ontario Canada the Sawstop PCS is over $4000 which is too much for a hobby.
Thanks a lot. I have a Fusion F1 (no room in my little shop for the F2!), and I have about the same opinion.... and I love it!
Great Job! I have been waiting on the review. Have dewalt contractor saw currently and will definitely be in the market for the laguna F2 in 6-9 months. As always great production! Thank You!
Thank you for providing your content. I have a Laguna PX12 planer and love it. I am a hobbyist woodworker and have a limited budget and the Laguna PX12 works well for me. Mine has a prototype cutter head and it works well with hard maple, mahogany and walnut, the wood species I usually work with.
I enjoyed the video breakdown of pros and cons. Great job and honest reflection in your presentation, I didn’t feel there was a conflict of interest with your full disclosure. Im a professional woodworker. I’ll be in the market for a new cabinet table saw this fall as will be selling my Delta cabinet saw and moving to a different state. That said, the Delta has practically same fence and I love it. It’s safer than the Biesemeyer type fences when the blade guard is properly in place. It’s one of the reasons I’m interested in the Laguna. I never had deflection issues with the Delta fence. I will reuse my Extractor overhead 4” rigid port over the saw blade, so better airflow over the blade and guard has larger footprint to capture more dust then the Laguna’s paltry ‘free’ dust port. Saw dust collection is my number 2 priority. That said, I’ll be looking at the Fusion 3 model, now $3K. Taiwan made is usually much better than China made, so not a problem for me.
Great review Travis.
I bought the F3 and have been really happy with everything EXCEPT the dust collection. In short, it's horrible, however, I've never found a table saw that has really good collection. All in all, they're great saws and would definitely recommend to anyone looking into a table saw purchase that they look hard at this series of saws.
Thank you for the video, my 30+ year old craftsman finally pooped out on me and I bought the fusion 2, after watching your vid, and love it, its so quiet my wife says she doesnt her it from her office while Im making dust. Keep those great vids coming.
Great review Travis. Maybe Laguna will work on some of the "not so good" things you talked about. Unless the saw is encased in a vacuum, I haven't seen any table saw that is great at dust collection. Just part of our hobby. Thanks for all your honesty.
Thanks for the review. Ive been wanting to buy a new saw and been looking into this one.
That fence deflection is a show stopper for me. My Dewalt job site saw with its rack n pinion fence is solid when locked.
Excellent review. Thanks for showing the amount of flex on the fence. Looks like a great overall product but that's a deal breaker for me.
Super helpful since I’m in the market for this model. Thank you.
I agree with your assessment. I have the previous version of the F2 (no DRO). I converted mine to 220 to free up space on my 120 circuits. To increase suction inside the cabinet I took off the dust collector connection from the cabinet and drilled out next to where the hose on the inside connects. This, in addition to taping over any other holes in the cabinet, has vastly improved my dust collection, even without using the over blade setup. I need to find a small blast gate so I can isolate the over blade hose if I'm not using it to make it quicker to isolate. If you happen to be able to 3D print one, I would buy it from you!
I agree with your review, I love my F2, but the dust collection is my biggest issue.
As a woodworker of over forty years, I bought the version of the F2 before this version. I needed a saw with a small footprint. That said, you are correct that the Laguna has some of the features that much more expensive saws have. My fence version has no deflection and I have consistently used my fence for many months and it and the measurement scale are still right on. Dust collection, I put a 4x6 oval hole in the cabinet and plugged a 4 inch hose to it. That solved the problem , and it one of the few Laguna does have trouble with.
Good review. Today I went to Rockler. Viewed the F1, F2, side by side. I am sold on the F2. It’s exactly the size and quality I want. Thank you for getting it to my attention via your review. Please maintain the no nonsense forum you have with your videos.
Fabulous as usual Travis. Thank You- I've been eager to see what you thought of it. I ended up going with Harvey due to ol' Mr. Nubs over there. Thank You and keep up the fine work.
Thanks for this. Your other video was one of the reasons I plan to buy an F2 in the near future.
Really informative vid. Especially like the fact that you shared some not so good things about the saw.
I got the sawstop for the insurance. But it really is well made with a beast of a fence (I upgraded it from stock version). I think Laguna would need wider wings to withstand the moment arm that's being created. And bracing for the fence itself. But as you said, at half the price (or more), some compromises had to be made.
Thanks man! I was holding my breath, hoping you would recommend, mine gets here sunday.. I'll take the hell yes!
Thanks for the review. I have an older shop Smith and an older craftsman saw. I have been looking to replace the craftsman for a newer saw. The craftsman I am going to turn in to a dedicated dado stack saw. That is due to the craftsman not have some of the current safety features. Thanks once more for your review.
You just sold me on the SawStop. Really great video and thanks for helping me decide!
Thanks for giving the overall dimensions. Something that is very difficult to find for nay saw on the internet. 1.5 car garage, even dedicated as a shop, can't do that width, and still allow me to be a mechanic too. Thank you. Thanks for all the videos, and the high quality content.
I looked at the fusions today. Measured them. The f1 is 31 1/2 in front to back. 59 in left to right with the rails being a big part of that length. The F2 is same front to back and left to right it’s 67 in. Once again the rails are a big part of that size.
I just got my F2 in. Love it, except a few things. One I noticed is the blade tilt. I can only get it to 44.8 degrees. (checked against my little square digital gauge as well). I'm guessing that's something I will have to adjust inside... I just don't have the time right now to tweak things. I prefer they worked "out of the box". That over the arm thing is cumbersome and the "teeth" dig into the wood. I doubt I'll use it... so now i have to plug the smaller port down at the bottom by the 4" or I lose a bunch of suction. The tool caddy on the side of the saw is the same as from a few years ago, but they changed its placement and the mitre gauge slot is now blocked by the handwheel. You have to stick the mitre gauge in from behind now and it sticks out of the back, making it harder to have an outfeed table butt up to the saw unless you make a space for it. Still a way better saw than what I had.
I recently bought the Fusion F3. I had the same issue with the fence deflection until I squared the top to the blade, and then squared the fence. Now that everything is dead nuts square, the slight potential for deflection doesn’t impact accuracy of the saw. That said, if the saw isn’t properly tuned, the deflection of the fence will contribute to further inaccuracy of your cuts. For anyone that buys this saw, buy a gauge and tune your saw. It is well worth the small investment in time and additional money to get the best performance out of your saw.
Great points, yes I've found the same thing. When the saw is calibrated square (table, blade, fence) the deflection doesn't actually impact anything.
What gauge did you buy if you don’t mind me asking sir?
Appreciate the review both good and bad. Currently editing my initial review of my Delta and nodded along when you were talking dust collection on table saws.
That flexing fence was something I spotted right away and it's pretty much the reason why I decided to spend more and get a sawstop.
I'm shook that it's been 1yr already 🤯. Seems like only a few weeks ago I saw your 'not a $3k SawStop table saw video'.
thanks for the review i have been considering this saw thanks
Great video, Travis! I actually bought an F2 several months ago after watching your Saw Stop vs. Laguna video. Like you, I think it's a fantastic saw for the price, and I also have the exact same grips that you have (mainly the dust collection). After all is said and done, I'd buy the same saw again, so thanks for making that comparison video - it really helped me make my table saw purchase decision. Love your channel, man!
Great job! thank you for being so honest, from Laguna Beach CA
Instead of comparing to a Sawstop, I would be interested in your thoughts on this compared to your old delta. I`ve got a delta 36-5100 with the cast wings and I am very happy with the performance of that saw for the money.
I bought an F2 AND a Laguna Revo 1216 Lathe for about the same price as a SawStop... I'm very happy.
Thank you for the Review. I bought one because of your introduction to it after you bought yours. I love it. I bought mine after you bought yours and didgeridoo the Digital Readout. Huh.
I've had mine for about 3 months agree 100%. One thing I'll add is that my fence was dented upon arrival and they sent me a new one no questions asked. Only it was a different fence, no high/low detachable thing, it's all one piece and now my measuring line doesn't line up with the ruler on the table. It's off by a perfect 1.5" so it's not that bad. Idk if that's good or bad but thought I'd add it.
My Sawstop professional 3hp 220v doesn't collect dust from the overhead very well either. It is better than nothing but far from perfect and it depends on what you are cutting. It is however very sturdy and easily adjustable and swings out of the way if necessary. The lower dust collection does work very well. Your tip on closing up the angle adjustment hole is a good one so thanks.
Thanks for the honest review!
awesome follow up for the last video thanks!
That deflection looks pretty large. I just tried the same experiment on my Lowes Delta tablesaw, and it doesn’t seem to deflect that much. Three places that it could be moving… the front rail is flexing, the rail to fence joint has some play, or the fence is flexing. Any flexure in those beams (the rail or the fence) would indicate, to me, a serious error in design. I would tend to be more forgiving of the joint, but still… I’d be inclined to replace that fence with the Delta system, which is available with both rails online, assuming it fits. Overall, that still looks like a good option if the comparable Sawstop is out of someone’s range. Thanks for the review! Love the channel!
Very thorough review, thank you!
Another great production, thanks
Very nice review. I'd love to see you check out the Harvey Alpha series, too. Stumpy Nubbs recently got one and their 2hp 36" rip capacity model is frequently on sale for $1,800 right now. Again, it's one that comes with all the features included. I built out a SS contractor saw on their website with the capacity, dust collection, cast iron wings and mobility and it was about a $1,600 difference. That's not even looking at their cabinet saw models.
I hope that if/when you remake your overhead dust collection, you make that a video!!
I have a cabinet shop and the F2 has filled my needs for 2 years now. I did upgrade the fence rails to 52” tho
In regards to that 220v upgrade, it's a joke. I bought it shortly after getting the saw. It didn't have any instructions with it at the time and support couldn't point me to anything. The strain reliefs they used are impossible to remove. Support suggested I just take the old switch off and put the new one on. You still have to remove several unremovable strain reliefs and you still have to replace the power cord. At that point, you the only old part left is the cable from the switch to the motor. I was able to get my money back for it.
I also asked support about adjusting the blade to the fence. You have to loosen some screws, but the images were not clear on where the screws were and I couldn't match it to anything on my saw. Support basically said to open it up and figure it out myself; that it would be obvious.
I have just ordered a fusion 2 from Charnwood at a fantastic price. I was after a fusion 1, which is out of stock Uk wide, but have now bought the fusion 2. It seems Charnwood are offering the f2 at a brilliant price to those who are after the f1. There are lots of distributor issues with Laguna at the moment. Charnwood were the UK distributors but are no longer it seems. The baton has passed to Axminster who will only be selling direct so an immediate loss of competition and no date for resumption of sales. Not many f2 left on this deal so if you were interested in the f1 give them a call
The deflection could be caused by too many parts that make up the fence "frame". By that I mean that the "head" that slides and locks on the rail is attached to the " fence holder" that the sliding fence attaches to. That's two different parts with a mechanical connection. (bolts, pins, rivets?). I would assume that the head locks tight and doesn't move. But there is an attaching point from the head to the long square frame that could be a point of movement. In the Delta Unifence the locking part on the rail and the frame that the sliding fence attaches too is cast as one piece. Mine is 25 plus years old and is rock solid. Also another advantage of the Unifence is that the sliding fence can be used on both sides of the blade. It's my understanding that the Laguna fence can only be used on the right side of the blade. Am I wrong about that? Other than that, the saw looks like an excellent machine for the price. I don't think I would let the fence keep me from buying one if I were in the market. Have you found the 1 3/4 horse motor to be enough?
Thanks for a excellent review 👍🏻
It appears that the fence could benefit from more rigidity. I know they have a fusion F3, however it does not appear the fence is any more ridged. When I decide which cabinet saw to upgrade to I am hesitant to pick Laguna for this reason.
So catching up here as it is 2023 almost 2024. I recently acquired a Fusion 1 that was being sold due to moving. I purchased it for $400. While this was an amazing deal as it was rarely used I got it home and found that the dust collection on it was clogged from thin pieces was lodged to the bottom of the dust collection. On clean the inside cabinet to find that the hose from the 4” was reduced to a 2 1/2”. When the blade is at the lowest in the cabinet it kinks or bends and the hose is flimsy. The length is necessary to raise up with the blade height. The bracket that holds the wrench and miter tool comes off and is a hole into the the cabinet that i sealed off with a small thin tin diamond plate piece cut to size and the screws will not accommodate much more that that to put the bracket back on. The panel the covers the motor also holds tons of dust and builds up. I covered the hole for the overhead hose to add more suction to the saw itself. Still a good saw! And had I not found this deal I would have bought one anyway. Great review! Keep it real and don’t forget to keep some mix and builds in your videos.
This was a great review. Thank you.
My F2 is trapped in its crate awaiting setup...but the shop is still under construction. Thanks for all the info...it's very helpful.
Awesome review, Travis! That fence deflection is a bit of a bummer
Agree with everything here. I have the exact same saw only an older version I picked up off of Craigslist for 700 bucks, which was a steal since the guy never used it and look brand new. The dust collection does suck, and it does accumulate in the cabinet, like you I have not made those modifications to it yet, simply cause I work so much, but it is in the plans. Me personally any large sheet goods gets cut up by the Makita track saw, for me in my small space it’s safer & the accuracy of the track saw is amazing. So that’s not too much of an issue with the fence, a lot of what I do is small work on the table saw. Being about 12 years old or so it will seriously not only pass a nickel test, it will pass a dime test, and both tests were conducted cutting a 2” piece of Indian rose wood. I was actually amazed by this. It has actually been an extremely wonderful Saw to use & have in my garage & I would recommend it too!
I really appreciate your review...this saw is one of three I'm looking at buying in the near future and your information helped a great deal. As a side note, I'm interested in where you bought (or made?) that fence caddy? I would love to get one! Thanks
The deflection on the fence is not really an issue.
As stated below, in a very good comment, it's an aid to avoid kickback. I have never thought of that, but that is very well thought of.
But also, don't forget, the second half of the fence is absolutely useless. As a rule of thumb you should set you fence length to be 45 degrees back from your saw blade beginning. But you could genuijust have the fence end at the exact point the blade begins and still have a good cut.
On my 4HP SIP saw the fence locks front and back so I always without fail, make sure that the back of the fence is .5-1.0 mm further away from the blade than the front. Never had kick back and hopefully I never will. Doesn't seem to affect the dimensional accuracy either so I'll continue.
Sorry for the long comment. Do you find the motor on that Laguna to be a bit underpowered?
Great review bud, thanks. I went with the Harvey table saw at the same time you got the F2. Loving it, and the dust collection line is a bit more robust. Same issue with a very similar fence though.
Thank you for all your great content. You organize the information and present it in a way that makes it very easy to get all of the information.
Sorry, you might want to check your sponsor link in the description, you added an extra "e".
Fixed! Thank you for pointing that out
Im looking at this one and the Harvey Alpha Series. I cant decide which one. They both have good qualities that go back and forth
Great review, just enough info to make me want to go up a notch or two, maybe Harvey or SawStop.
Great review man!! 👏
BUT... after everything you have stated about this machine, it's safe to say that it's not really in the same class as SAWSTOP and doesn't really compare, it does some things well, but that fence deflection is definitely a deal breaker for me.
SAWSTOP is expensive as hell, but here's the solution, use a lesser table saw for a few years and start saving money, the lesser table saw will get you by in the mean time and then by the time you have the money saved you'll be very enthusiastic and ready to make the switch, it doesn't have to be a SAWSTOP either, but it doesn't have to have a perfectly flat surface and a perfectly square and accurate fence with ZERO deflection!
100% agree. Great saw for the money, great review.
Thanks a lot for the 1yr review and your no-nonsense approach is very refreshing. The same F2 was on my final-two list when I was looking at upgrading from my almost 5 yrs old Ridgid R4512. Your comparison with the SawStop was IMHO spot on. I went with my other option, the Harvey HWL110LC-36P. I won't go through a detailed comparison, that would be hijacking this thread. Just to say the Harvey addresses a good deal of your like-not-so-much points.
Stay safe and think about all the hot-dogs you're saving by not having gone to the SawStop side of the Force ;-) If interested we could do that comparison remotely? NB my garage is WAAAYY messier than yours.
Patrick, I would love to hear your thoughts. I'm in between the Harvey 110LC-36P and F2
@@kp2four Between those 2, definitely the Harvey. Between the F3 and the same Harvey, that would be a much more nuanced decision. Again, I don't want to highjack here, so I'll leave it at that.
Watched your initial review and this one again. I bought the 14-12 bandsaw primarily to resaw lumber. I like everything except the 4" dust collection port is over-sized - that is, my 4" dust hose did not / will not connect to the saw. Solved the issue with a 4" dust hose connector and also a 4" rubber connector. Now my dust hose from the cyclone connects as it should [ plug and play. Not convinced that the $600 difference between the F1 and F2 is worth the money. The main difference is the additional 1/4 hp. Is the juice worth the squeeze?
Love your honest reviews.
Thank You, Great video.
F1 owner here. Shop equipped with small dust collection system. The interior hose on the saw and the port restriction were removed. Still mediocre dust control. I finally removed the shroud from around the blade and collection is much improved. The shroud was redirecting dust out the top due to airflow not reaching the blade.
Fix your fence problems by getting a 2x3" rail kit (or making one) and getting a Super Cool Tools fence. They are very nice. Also, I still disagree that this is equal to a Saw Stop. They just are not the same class of saw. Maybe close to the Saw Stop Contractor saw, but not really the same either. The Fusion is more of a lightweight cabinet saw, where the Saw Stop is more of a medium weight cabinet saw. The Fusion F2 is a rebranded / different version of the Jet Proshop. You can not say the Jet Proshop is in the same class as a Jet Xacta, which is what you try to do by saying the Fusion is equal to a Saw Stop. The Jet Proshop is in the same class as the Fusion and the Jet Xacta is in the same class as the Saw Stop. That is not to say it is a bad saw for the $. I just do not want people to get the wrong idea here.
I see a lot of comments about fence deflection. All fences of this style, where the only lock is on the rail at the front of the table, is going to have some deflection. There is not much of a way around it for this type of fence. The fence that came on my old Delta locked at both ends of the fence. But it was replaced when I made the table wider to accommodate plywood sheets. I went with a Vega fence and system. Minimal deflection and the only time it's an issue is when someone is horsing around a sheet of plywood on it. But used properly it's straight as an arrow.
Ok, looks like a good professional cabinet table saw. You probably should have gown with a Harvey. That's what I have and Am VERY Happy with this device. 3 things you dislike about your Laguna, Harvey kills.
Worthy of a Change Home Improvements
Actually a question. Did you switch to 220 and did it really make it run better? Do you have a link for the magnet for deflection or consider any other method?
Would like to see you build an extension table for this saw, so I can copy your design and execution of course. I have an older version of the F1. Thanks.
I have used the laguna table saw, and I think they cheaped out on the front rail of the fence, as it’s made out of aluminum, not steel. Even the $650 delta saw has a steel front rail! Their saws are pretty damn good, but aluminum is a very soft metal, and having the fence clamp down on that is, well, poorly designed… I now use a sawstop, and that fence has no deflection at all, as the front bar is steel. I haven’t seen any other cabinet saw besides the laguna use an aluminum fence bar. Usually jobsite saws have aluminum bars… I am disappointed about this, and would not classify this to be on par with a sawstop, grizzly, or jet, as this was a major part they really skimped out on the quality. I upgraded my old one a while ago with a delta fence, and it’s so much better! But you gave honest opinions, and actually gave useful information about the saw. This was a really good video!
Hi Travis, can you please explain how if you've had this saw for a year and your original video the saw didn't have the digital readout and this video it shows a saw which has the digital readout? I know you said you got a discount, but did you get a discount on 2 saws and get rid of the original one or did you somehow get one of them free?
Can you make any tightening adjustments on the “T” part of the fence. Normally used to adjust for square. Maybe tighten both sides?
Thank you for turning me on to laguna!
I have an old Delta Unisaw with the Unifence. My issue with it is the fence loses its square to the blade , check it once a months. easy to adjust The other issue with the old saw, NO Riving knife. I made Zero clearance inserts with a spitter. Works ok but rather have the real deal. Oh yah one thing. Horrible dust collection. I wear a mask anyway. Saw dust in the lungs is not good.
Good review BTW. Gonna stay with the Delta. with a sharp blade it cuts just as well as any other table saw.
I've only had mine a short time but I like the fence. I does deflect if you force it but there isn't normally pressure past the blade. The fence does not misalign or move during use. It moves and adjusts easily. My main issue is with the dust collection. I would appreciate any ideas from someone that has used the saw. My old Craftsman contractor saw with a DIY system collected dust better. The onboard tool holders are nice but are nothing special.
Appreciate the review Travis. Dealing with the little things you mentioned on a daily basis would have me seriously second guessing choosing the F2 if I did so. Fence and DC are two very important factors of a good table saw. My current saw, a steel city, has a few annoyances that didn't seem big at the time, but after a few years of use, I hate that saw with a passion. Sawstop will be the last saw for me, where the only annoyance will be the bigger upfront cost.
Have the F1 and I would say there are similar positives and negatives. Honestly, the over-blade dust collection is a joke, but otherwise I’m super happy with my saw.
Thank you I have one same cons as you did you convert it to 220 will it give it more if I convert mine?
Purchased my f2 because of your original video. Would love to know if you’re going to sell a product that helps with the suction of the dust collector (cover for the open space by the front wheel)
Hi Travis. For the dust collection issues, would using thick magnet sheet (used for contractor vehicle signage) be an easy way to plug the arbor tilt hole? "Peel - Tilt - Seal"?
Thats a great idea
F3 here and all good for over a year.
When your first video came out on this saw I don't recall the digital gauge. Just curious if they sent you a new cabinet? Btw I got the f2 and will be getting it delivered this week. Thanks for the great content.
Can’t you tighten the fence so it doesn’t deflect? I have a Craftsman 90s-era cast-iron contractor saw and I noticed the back edge of the fence was deflecting a lot, but after I tightened and tweaked the fence adjustments, it no longer deflects.
The front of the auxiliary guide should be a maximum of 10 mm beyond the point where the saw blade cuts the wood to its full height. If the auxiliary guide extends further, the risk of the workpiece getting stuck between the saw blade and the auxiliary guide increases. And futher more you will have less deflection
You can put a 3mm strip of something at the end of the cast iron table and wheel at the end of the fence will bump into it making it solid and wont move a bit. I also noticed the same problem with the fence and this is so simple that Laguna should actually do this instead of me.
Hey just wondering I have enough money saved to buy your old delta table saw but do you think it’s worth it to keep saving and get your laguna F2. I have a contractor saw right now and I’m not a professional and I don’t plan to be I just wanted to hear your opinion on delta vs laguna and is it worth the extra money?
I also have the F2, however mine must be slightly older than yours because it does not have the digital gauge, other than that it appears identical. I had a ton of issues with the "euro" fence, it was basically twisted it was out of square to the left at the front, and out of square to the right at the back and let to some very poor cuts. They ended up sending me an older, standard style fence to replace it (free of charge), just unfortunate because now the tape measure doesnt line up anymore lol