Thanks for following along with this video and hope you enjoyed it. If the Longmill peques your interest, check it out by clicking here now: sienci.com/product/longmill-idc-woodcraft/?ref=IDCWoodcraft
Enjoyed the lesson and wanted to say thank you for the clarity along the way. I'm new to this and at 84 years old and building a 4' X 4' 2.2kW vertical mill from scratch, it has been a challenge since the more I learn, the more I realize what I don't know. Be well. John K.
the author does like to from scratch, shaping and trimming wood from large blocks into fine finished products. th-cam.com/users/postUgkxD-QRFQz730FJEh4f9BYSf-nkIMIC9hL_ as another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us dont have the room or budget for. But, knowing how to do these things, even if we wont be able to practice the full stack project, is still great.
Sonja, I'm a little unclear on this one my friend. Are you looking for which types of woods would make a good cutting board? If so, there's so many good options!
Now I know I’m getting a cnc router. I sat through the whole video and backed it up several times, but at least understand it better. I actually sent this video to my phone so that I could save it, and I could go back and study it more. I can draw almost anything on paper, now I’m hoping to be able to use the CAD and CAM to put some of my art on wood or other materials. Thank you so much, the video was very informative, even for an old man like myself. You have a new sub. God speed
Hey Mike, you're so welcome! I'm glad this one was helpful for you! Sorry for such a delayed response, it's been a busy week working on getting some new videos out!
I used to carve woods with some designs like a praying hands,a face etc by using only a sharp knife, a broken glass and a sandpaper. Wish i could buy this CNC Router. Maybe someday, i have this womderful machine in my hand and command it to do even a hard task. 😁 This video is very precious for me.
Mamuana, you will be amazed what a CNC can do to projects like you are describing. Keep working hard and pick yourself out a machine! I think it will be very rewarding for you.
Excellent step-by-step! One tip re: CA glue and accelerator - Put the CA glue on one piece (your sacrificial table in this video) and spray the accelerator on the workpiece. Now you won’t accelerate until you marry the two pieces together.
OMFG. I've been searching the internet for a simple to follow video that teaches the basics, instead of skipping over them. I've purched a Foxalien CNC (which I'm waiting for its arrival), and I've been trying to learn the basics of how to use it. Until now, everything I've watched requires me to be smarter than a rocket scientist, with CAD and CAM software that is Einstein level. I really hope that my Foxalien will be compatible with the software that you demonstrated. You Sir, are a bloody legend 👍👍👍
Just begging to research adding a mill to my woodworking activities, now that I have retired. Just a hobby for me. Thank you for sharing your awesome videos with us, from Henrico County Virginia
Norm, you're so welcome! I truly love what I do and sharing what I love with our awesome CNC community! Let me know if you end up making the leap of faith my friend, it's awesome!
Hi Garret. I have to be upfront with you about your videos. Although there is a lot of good information you share with those interested in CNC projects, I don't have 55 mins in my day to burn watching your videos. There are a number of people in the cnc video world that have great, to the point videos that are consolidated down to 10-20 mins. I look forward to being able to watch your content once you're able to a more reasonable time-frame. Thank you for sharing you tips.
Mental health is a bigger story that is never discussed publicly or, worse, shared with anyone. But, Garrett, the answers to life are out there. Seek them!!! You are not alone, brother.
I have been wood worker for years, I just ordered my first CNC machine, I haven't received it yet, but now is the time to learn. When you mentioned "brushing the router's teeth" I got a good chuckle. I learned that years ago. Nothing hurts worse than having a router bit work its way out and eat through an expensive exotic wood board. It has only ever happened to me once. May it never happen to anyone again!
WikiSnapper, congrats on ordering your new machine brother! I'm looking forward to you getting your machine in hand and seeing what you create. Definitely want to brush those teeth my friend. You're absolutely right, it'd be a shame to ruin an awesome project and piece of wood!
Iam 74 years old I took one lesson on the cnc at the shop, very complicated. I watch your video and I was amaze how you teach. You explain in a manor that it is a lot eazer to understand. Thank you Garrett. ( I am going to watch it again)
joemac-q4x, I'm so glad to hear that the video provided a helpful aha moment for you! Keep exploring and learning more about CNC woodworking - it's such a rewarding craft.
I just started watching this video and had to stop to comment, I’ve been married to my wife for 42 years and I still can’t figure her out lol 😂 I sure hope this CNC will be easier and faster. 😂👍🏻
Wow ! I have never seen this depth of information and explanation on where on youtube I was given a shaper origin 2 years ago for my birthday I liked it because space is an issue and it is portable but nobody explain in detail like you cause a lot of people like me go on the tube to find explanation and at the end of the video you end up blank cause did not understand any of that jargon and wasted you time learning so thank you for that I appreciate .👍
Garrett, wish you knew how many times I watch your videos, over and over and over. I have a hard time learning but I stick to it. Thanks sooo much for your help. Just getting started trying to get a drilling path for my spoil board. Good thing you are there to help!
hailparris, That's awesome! CNC machines are a fantastic way to explore creativity and precision in woodworking, metalworking, or even crafting projects. They can be a great bonding experience for you and your son as you learn and create together brother!
Hongtecklee135, welcome aboard brother! I'm glad the videos have been helpful so far. I'm happy to be a part of your CNC journey and hopefully make things a little easier along the way!
I am at a point in my life where your story hit me..... Hit me hard... I feel a bit more confidant in not only myself but in my dream... I can not support IDC Woodcraft right now. I need to do some things first. I will buy the bits and get the CNC in the near future. Keep up the Great Work Garrett....
Hi Michael. So you are there. As you know...I understand. Write out what you want (not what you don't want), and focus on that every day. You will be amazed at what things look like in 6 months compared to now.
P.S. I bought the Longmill machine Garrett is using in this video and honestly the Science folks have been courteous, polite and extremally instrumental when I got stuck, Thank you Science and you Garrett .
Exceptional videos. I just bought my CNC a few weeks ago. Have been spending time to figure out the SW (from the vendors tutorials) and then I found your TH-cam videos. WOW is all I can say. Running out now to get some MDF so I can make my spoil board, get it attached to the bed of my CNC. Probably, will use gSender instead of Ready2Control. Enjoy the coffees...
Jay, I'm glad I could help! I'm excited for you to get your spoil board done and for you to get to cutting! Keep up the good work and thanks for the coffees!
Garrett, Two of my favorite quotes are: "The Greatest tragedy is a wasted life." "No one on their death bed ever said, I wish I spent more time at the office." Thanks for another great video and sharing a part of your life story. When I was younger, I too was working at a job I hated. I remember my legs seemingly turning into lead as I walked up the stairs leading to the factory floor. I finally made the decision to go back to school. It was the best decision I ever made. After my electronics education I went from laboring in a factory to working in the engineering department for a local electronics firm. Even though it was a good job, I still had another yearning to do some creative and technical writing. Finally, after I retired, I started writing and submitting manuscripts to a few newspapers and electronics magazines. A long story short, and to my amazement, they actually paid me for the manuscripts I submitted. - Like you said, you have to believe in yourself and do what makes you happy. I wish you continued health and success.
Hey Roger. Isn't it amazing when we do something we want and not 'waste our life'? Thank you for sharing part of your story. Mark twain said "Don't think, Ddon't try, just do"
jh7531, You're very welcome! I'm glad to hear you find the teaching style helpful. If you have any questions or topics you'd like to explore further, feel free to ask!
Thank You so much. I am at the “about to buy” stage and was a bit overwhelmed with the various bits of knowledge required. In this video, you put it across in a very, very, very understandable way, covering wee hints and tips in an extremely competent manner. You have moved me up to the “get to the shops” stage. Look forward to having at look at your other tutorials. Many thanks once again 👍
Jim, I am happy to hear that this video clarified some things for you. Jumping into CNC can be a bit overwhelming, so I am happy to hear that you found this video helpful!
My CNC is finally being wired up tomorrow. It has taken me almost 5 months to find a electrician to upgrade my house for the CNC router I purchased. Day 1 is tomorrow. My semi-retirement is now in the works. Thank you for a great video and some life changing advise.
Good luck for tomorrow Kurt, hope everything goes well ; ) When you first see your CNC machine going through it's motions I'm sure you'll find things pretty amazing, you can finally sit back and say "I did that"! To create something out of nothing ............... there's no greater satisfaction! All the best mate ; ) TURK
@@IDCWoodcraft It is up and running. Will be making a program and giving it my all. But tomorrow. It was a long exhausting day and want to be fresh. FYI the machine is a Laguna Swift 4 x4.
Garrett... This was a great video... I got a small CNC Router (3018 Prover) and after assymbly was confused by all the software... this video made it easy and I actually cut my first few practice pieces this weekend (yes the circle and square and some others of my own design). I think I watched this video at least 3 times. Thanks for showcasing Gsender... much better, more intuitive software than Candle that was supplied with my machine... what a piece of crap!! Gsender is really a great piece of software!! Totally hooked on CNC Routering now!! Cheers! Steve
I have the same machine as well. I was wondering if you use the z probe with it. Was a little complicated with candle so I used the paper method with mixed results. Wondering if it's easier with gsender.imma try it out later
Garrett is incredible. As a new CNC owner for the first, this video is an outstanding compilation of not only learning CNC but also learning how to use and design in CNC software, the does and don'ts and much more! It is definitely worth the one hour you will spend with Garrett. I will be watching hi other videos to help enhance my CNC abilities. Thank you Garrett!!
I spent 3.5 days trying to figure this out. Finally got it to work. Took 2 computers step by step. Wish there was a book. I am not buying a machine until I can work the VCarve somewhat. I am giving myself 6 months. I used Mastercam when I was machining. So far nothing crosses over. I'm retired and just plan on hobby stuff.
@@IDCWoodcraft My biggest challenge was switching the cutter path to the outside. Got er done ! I am trying to figure out how to fillet corners. Mastercam was easy to do that.
Hi Garrett. I`m completely new to CNC Routers. Your explanation of how to use a CNC Router and what to look out for, is just fantastic. Keep up the good work, thanks.
Excellent video tutorial. Clear and concise. I'm new to the world of CNC routers and project design. Your video did just as said in the description. Hats off to you Garrett! Keep up the good work. I am following you.
I have a Shaper Origin and many of the terms and processes are very similar. I see a flat bed CNC in my future soon so this has been great to alleviate my apprehension about transitioning over.
Wow!! I just came across your channel. I am considering getting a CNC machine but have been hesitant because I know nothing about it. As an artist it’s something I’ve been wanting to learn to be able to create wood projects I just didn’t know how or where to start. You make this so simple. I appreciate it. I will continue watching you to learn and save up to buy one. Thanks so much!
Andrew, glad to have you here brother! Everyone starts in their CNC journey where you are now so don't be intimated. CNC machines could be a great addition to your creative toolkit!
Thanks you for your information and videos the are abreast tool for all of us new to cnc great job and very much appreciated keep it up l have lot to learn thanks
I need a few bits for my CNC and I ordered one from Amazon…….then like a fool realized I should have bought it from you to show appreciation for what you are doing for all of us. Question…..where can I go buy some bits?
Hey Chris, thanks for your support brother. I appreciate it! You can buy bits off of my website. Here's the link my friend → idcwoodcraft.com/cnc-router-bits-2/
Hi Garrett, I succeeded in cutting the circle and square! It is thanks to you, I am so so happy. Again thanks so much. I’ll try to regularly contribute as if you had Patreon.
Hi Simone. I could see the excitement in your message! I'm so glad to see this. I don't use patreon because it is a pain in the ass. Instead I use by a cup of coffee. It works much better. Here's the link if you ever want to contribute. Thank you www.buymeacoffee.com/garrettfromme
I am so thankful for your tutorial video. I will be working, learning on small Hammer HNC 47.82 router from Felder, also downloaded Vectric, seems like great software. Thanks you.
Thank you for these videos. I have a longmill on order. I watched 2 of your videos one of them I listened while I was on a 4hr drive. I now feel like I know where to start and how to start when I get my cnc set up.
I've got a yeti smartbench coming so now I have to learn! I'm a software engineer so I'm comfortable with computers but am coming to this completely green. This was the most helpful video, and done in a way that I really understood. I now understand the process and can build on that while waiting for my machine.
Cameron, right on brother! I'm excited for you to get your machine and get started! I'm not sure if you've already seen the PDF I've put together for beginners yet. But, it has a list of all the videos I've created in order so that they are easier to find when just starting out. I think you'll find it super helpful! Here's the link if you wan to check it out →bit.ly/3mLHGfI. I think your background as an electrical engineer will definitely be to your advantage! I'm excited to see all the awesome things you create.
Great video. I watched the entire video - even though I knew most of this already. There are a few things I think you will want to try. Thin double sided tape instead of CA-glue: Do not use double-sided foam tape, because it'll make your Z-homing inaccurate. (which matters a lot if you're milling metal). When using thin double-sided tape, you will still need to sandwich it between masking tape, but it'll be easier and quicker: 1: put the 3 strips of masking tape on the bottom-side of your board. 2: put the 3 strips of double-sided tape on top of the masking tape (in the center of the masking tape if the double-sided tape is narrower) 3: put the last 3 strips of masking tape 'upside down' on top of the double-sided tape. 4: Flip the board and put it whereever you like. Another great tip I got from someone, is not to "plunge" the router-bit into the work piece, but instead slowly lowering (sinking in) while routing (for instance if routing in a line, at the beginning of this line, the bit is just touching the top of the work piece, but at the end of the line, the bit reached the desired depth). If making a 20mm diameter hole, you might want to use the above technique combined with a bit that's less than 20mm, so that - say a 12mm bit will be cooled better as there's more air around the bit while it's routing. (in other words: smaller bits might last longer if doing two passes than larger bits using only one pass). If routing hardwood, compressed air can be used to cool the bit. The last 3 tips do not apply to wood as much as metal, but I find them worth mentioning if someone can benefit from them.
@@IDCWoodcraft I'm happy to help - I enjoyed your video a lot. =) Note: Some cheaper CNC routers use threaded rods. These can get stuck and are also inaccurate (they're not ideal for CNC machine). Getting a lead screw (or preferrably a ball screw) is a much better choice. -Then again ... a threaded rod is cheap and most people can afford that when just starting and learning the machine. ... So if at some point the machine is acting up, check to see if it's caused by the threaded rod and change it to something better if it's time to "upgrade".
Garrett, thank you so much, I was struggling and getting annoyed You guided me in the right direction, heading out to my longmill and see if we can be friends again, lol Thanks again
Hey Nelson. Thin of your longmill like a girlfriend. You have to smooth up to her. Get to know her quirks. This video will get you in the right direction. If you're in any Facebook groups, maybe you can share this,. I mean, if you had the frustration, others do too.
Hi Garrett, I hope this finds you in the very best of health, It has taken a long time to find your site but well worthwhile and I have spent many hours watching and learning just one small thing could you please number each basic video as I'm sure all who search out the basic would find this an advantage especially if they are like me and review some many times. keep up the outstanding work and thanks very much
Hi Russell. Yes, the order is becoming an issue. Rather than number the videos (that would take a long time editting each one), I will be setting up my website and putting out a sheet that lists them in order.
Thank you - this was incredibly clear and concise. This video alone will save me from making a ton of mistakes. I'm awaiting delivery of my first machine and this will let me start off on a solid footing. Great job!
Great video and great explanation! You do a nice job! When I get a minute to breathe, busy busy before the holidays, I'll be diving in deeper on your videos (and the CNC for that matter).
I cannot express how much this video has helped and cleared all most common questions I have as a beginner. Thank you and hopefully we can still get more videos.
Hello, thanks for all the tips and shortcuts you are teaching. I’m 60 and always been fascinated computers and cnc machines, enough to get my self to built my own to learn everything possible I can, quick as I can. I have the same feeling on your side personal moments shared story. Keep your Glock or whatever it is on your safe and have it ready for the apocalypse, but for now there’s lots of kids (and old kids) that needs and appreciates you. You are doing good to the Universe!
Really enjoyed this video. I watched so many but this one is brilliant. Great job thank you. Only one thing. I have CNC without touch probe. Have you got any video how to setup without it?
Thank you for taking your time to share your knowledge. I am considering the purchase of my first cnc and I am considering the Longmill MK2. Only thing holding me back is the lack of info for Rotary for the Longmill MK2. That seems to be with all the desktop models of CNC. I even looked at AVID CNC and those cost for AVID are out of my current reach price wise. Your advice about doing an air cut first is spot on. At the current market volatility hardwood is expensive I paid $ 3.30 BF 4/4 S3S Red Oak last year 2021. I paid $1.95 in 2020 I paid as of Wednesday March 2 2022 same Red Oak was 9.95 BF. I paid 16.72 BF 6/4 Hit and miss (S3S) Maple. A mistake on the hardwood can be costly at current prices.
Hi Jwar, thats a great point about the Longmill lacking a 4th axis! Do you have a project that you need the 4th axis for? The big issue with desktop CNCs is the lack of gantry clearance required to install a 4th axis properly. You also might run into issues with the Z travel not being high enough and crashing the end mills into the rotary table. My mentee has an Avid and considered putting a 4th axis on his CNC but I convinced him that unless he needed it for a very specific project, it would be best to save the money. You could also consider doing your projects out of some other type of wood! I agree with you completely about the prices man! Even finding some 4/4 S4S maple I need for some of my projects has been a total pain!
@@IDCWoodcraft Thank you for the reply and the insight. As for the 4th Axis aka Rotary. It is more of a luxury addition now that I think of it. I watched several videos doing laser engraving on Cup , Glasses and other cylindrical items. As a Veteran During my years of service in the Navy as a Seabee I would how do I say this have Adventures in Alcohol and have many tokens from that period in my life. Some of the items I have are Beer Glasses / Mugs that have the Navy Mascot The Goat on them and as I knew many People from the Various Branches I also purchased Beer Glasses with those service branch Mascots such as the Marine Corps, Bulldog, The Army, Mule and the Air Force, Falcon so when my friends were over they would not feel left out. I even have a CSUMB glass or two from when I worked at the State University. Recently a friend was over my house and saw my collection and made the statement that It would be nice to have a set of those or even some mugs with the mascots. So It got me to thinking why not make them as in laser engrave as those glasses I have are about 20 years old and are not available for purchase. I can buy clear glasses and mugs and engrave them for Currently serving Service Members and for any Veteran possibly wanting a set or just one for keepsake. Plus I know some Fire Fighters the possibilities are endless even to the point of personalizing the glasses with name, rank, branch. I also walk with the assist of a cane and it would be nice to crave or engrave a custom image onto a cane. The world is what one makes of it and I want to make it an even better place and bring happiness where I can. Edit: As for the Longmill MK2 I have seen on the Sienci Labs website the addition of a laser and that has me thinking I can get a CNC and a laser engraver in one package , with rotary the sky is the limit as there can be work arounds as a recess or opening in the table top with careful thought can be done. J
Well @#%$ happens, broke 2 bits immediately, but, I did figure out to run the project with the z axis high so as not to ruin the project wood. 3rd try was a charm and have been running successful ever since. Your videos are great for some but when I contacted you you wanted me to slow way down. I am not wired that way and my best teacher has always been me. I appreciate your videos so thanks the videos and for your time you took to make them. I do pick up tid bits here and there from you as I am subscribed and do keep up with you and your videos. Lets face it even with these videos you will make mistakes it's just part of the learning curve, thanks
You caught up with me 🤠. I was embarrassed to admit that I have been unsuccessful in even making a line. Always some glitch. This one is a winner 🏆. However, I like the short ones too because then I have coffee ☕ with you in the morning 🌅.
Hi Garrett. A couple of comments. First, brand new to CNC’s, made my first cut yesterday (surfaced a spoil board on DIY machine). Second, if my high school teacher’s were as good as you I might not have spent 30 plus years working in a factory. Thanks. Third, I played with gSender for a couple of days, I like the ease of use but it’s a bit buggy and UGS absolutely refuses to connect to my machine (probably something I’m doing or not doing). OpenBuilds Control is playing well with my set up so far and I’m hoping one of the free CAD/CAM software’s is something I can figure out. Thanks again for taking the time to teach me.
This Old Man, congrats on making your first cut brother. And thanks for all the kind words, I'm humbled and glad to be a part of your CNC journey. Those are all great points brother, sometimes gSender and UGS get both buggy. It's figuring out which one is the less problematic and frustrating for you and your machine at the end of the day, one should work for you pretty well. Keep up the work my friend!
@@IDCWoodcraft hi again. Thanks for the response. Question. After surfacing I can feel some slight (a couple thousand’s deep) ridges in the spoil board. How smooth does my surfacing process need to be?
@@thisoldman7142 If you have ridges in the spoil board that means the machine is slightly out of tram. In other words the router is not absolute perpendicular to the table bed. Very slight ridges are okay but you want to get as much into tram as possible
I've been using Carbide Motion up till now but being a big Garrett fan I thought i'd give G sender a try. I really like it and have even started using my Triquetra touch plate again which was just gathering dust. A big thanks to Garrett and Sienci.
Thanks for following along with this video and hope you enjoyed it. If the Longmill peques your interest, check it out by clicking here now: sienci.com/product/longmill-idc-woodcraft/?ref=IDCWoodcraft
Lpp
Enjoyed the lesson and wanted to say thank you for the clarity along the way. I'm new to this and at 84 years old and building a 4' X 4' 2.2kW vertical mill from scratch, it has been a challenge since the more I learn, the more I realize what I don't know. Be well. John K.
Woops! Bad link.
Ron, apologies on that one brother! Here is a new link: sienci.com/product/longmill-mk2/?ref=IDCWOODCRAFT
need to fix that top pinned link.@@IDCWoodcraft
the author does like to from scratch, shaping and trimming wood from large blocks into fine finished products. th-cam.com/users/postUgkxD-QRFQz730FJEh4f9BYSf-nkIMIC9hL_ as another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us dont have the room or budget for. But, knowing how to do these things, even if we wont be able to practice the full stack project, is still great.
Sonja, I'm a little unclear on this one my friend. Are you looking for which types of woods would make a good cutting board? If so, there's so many good options!
@@IDCWoodcraftlooks like they were just advertising
Well done. Finally somone who understand the struggles of a beginner.
Clo, we were all there at one point or another brother!
Now I know I’m getting a cnc router.
I sat through the whole video and backed it up several times, but at least understand it better. I actually sent this video to my phone so that I could save it, and I could go back and study it more. I can draw almost anything on paper, now I’m hoping to be able to use the CAD and CAM to put some of my art on wood or other materials.
Thank you so much, the video was very informative, even for an old man like myself.
You have a new sub.
God speed
Robles, glad to hear it brother. Keep working hard and you will learn CNC/ CAD and CAM in no time flat my friend.
Best and easiest to understand I’ve seen. I’m 60 and ignorant of anything computer. Thanks very much!!
Hey Mike, you're so welcome! I'm glad this one was helpful for you! Sorry for such a delayed response, it's been a busy week working on getting some new videos out!
Newbie here. Best I’ve seen so far. You’re my go to guy now.
Geoff, right on brother! Welcome to the wonderful world of CNC.
I used to carve woods with some designs like a praying hands,a face etc by using only a sharp knife, a broken glass and a sandpaper. Wish i could buy this CNC Router. Maybe someday, i have this womderful machine in my hand and command it to do even a hard task. 😁 This video is very precious for me.
Mamuana, you will be amazed what a CNC can do to projects like you are describing. Keep working hard and pick yourself out a machine! I think it will be very rewarding for you.
Excellent step-by-step! One tip re: CA glue and accelerator - Put the CA glue on one piece (your sacrificial table in this video) and spray the accelerator on the workpiece. Now you won’t accelerate until you marry the two pieces together.
stevew3151, Thanks for sharing that tip! It’s a great way to control the curing time and ensure a strong bond when joining pieces together.
OMFG. I've been searching the internet for a simple to follow video that teaches the basics, instead of skipping over them. I've purched a Foxalien CNC (which I'm waiting for its arrival), and I've been trying to learn the basics of how to use it. Until now, everything I've watched requires me to be smarter than a rocket scientist, with CAD and CAM software that is Einstein level. I really hope that my Foxalien will be compatible with the software that you demonstrated. You Sir, are a bloody legend 👍👍👍
ShaunBuckney, right on brother! Glad to hear this one helped you.
Just begging to research adding a mill to my woodworking activities, now that I have retired. Just a hobby for me. Thank you for sharing your awesome videos with us, from Henrico County Virginia
Norm, you're so welcome! I truly love what I do and sharing what I love with our awesome CNC community! Let me know if you end up making the leap of faith my friend, it's awesome!
Hi Garret. I have to be upfront with you about your videos. Although there is a lot of good information you share with those interested in CNC projects, I don't have 55 mins in my day to burn watching your videos. There are a number of people in the cnc video world that have great, to the point videos that are consolidated down to 10-20 mins. I look forward to being able to watch your content once you're able to a more reasonable time-frame.
Thank you for sharing you tips.
theebalz, I appreciate your feedback! I'll definitely keep that in mind for future videos.
Mental health is a bigger story that is never discussed publicly or, worse, shared with anyone. But, Garrett, the answers to life are out there. Seek them!!! You are not alone, brother.
Hey Patriot. Not a big religious person, but Jesus was spot on...knock, and the door will open. Ask, and you will receive.
"And Get Your Questions Answered At The Same TIME!" Got to love it, Thanks Garrett another great video.... 👌👌👌
cjtoledor, I try to do my best! Thanks for the compliments!
I have been wood worker for years, I just ordered my first CNC machine, I haven't received it yet, but now is the time to learn. When you mentioned "brushing the router's teeth" I got a good chuckle. I learned that years ago. Nothing hurts worse than having a router bit work its way out and eat through an expensive exotic wood board. It has only ever happened to me once. May it never happen to anyone again!
WikiSnapper, congrats on ordering your new machine brother! I'm looking forward to you getting your machine in hand and seeing what you create. Definitely want to brush those teeth my friend. You're absolutely right, it'd be a shame to ruin an awesome project and piece of wood!
Iam 74 years old I took one lesson on the cnc at the shop, very complicated. I watch your video and I was amaze how you teach. You explain in a manor that it is a lot eazer to understand. Thank you Garrett. ( I am going to watch it again)
Oliverio, thank you so much! That's awesome, I'm so happy I could help make the CNC a little easier!
Hands down the best CNC channel I have found. I can now proceed with confidence that my future questions are probably already answered here.
Avoidtheherd, thank you brother! Im glad to hear you found this video helpful.
Good morning Mr. Garrett.
With this video, you saved my day. I had already forgotten all about CNC. Thanks.
Paulo, that happens to the best of us brother! We could all use a refresher every now and then.
Hello, I am a beginner. I jus bought a CNC ROUTRT 3018 PRO. I like yopur videos. thanks
Humberto, welcome aboard! And you're so welcome brother!
Thanks for putting your story out there. Your gonna be surprised how many people relate and understand.
Hey Deam. Considering the number of likes on your comment, I agree
Excellent video,many thanks Garrett.I have learnt a lot by watching this video…thanks again from the U.K.🇬🇧
Im glad you liked the video Geoffrey. Happy to hear that you learned a lot.
Your aha moment is no exaggeration for me actually!! after only 9.08 there is a lot more illumination for me, thank you so far...
joemac-q4x, I'm so glad to hear that the video provided a helpful aha moment for you! Keep exploring and learning more about CNC woodworking - it's such a rewarding craft.
I just started watching this video and had to stop to comment, I’ve been married to my wife for 42 years and I still can’t figure her out lol 😂 I sure hope this CNC will be easier and faster. 😂👍🏻
Travel Camp, man I totally hear you on that! I definitely think the CNC is easier to figure out! Keep up the good work!
I have been married 41 years. Can you give me any advise:)
You must be related to my husband😂
It's a walk in the park 😂😂
If you've been married for 42 years to a woman, you already have it figured out. Cnc is way too easy and simple compared to that.
Thanks very much, with this explanation indeed learned more than all the other TH-cam video;s Vectic uses.
WJ, you are so welcome my friend. Happy to hear you learned a lot from this one.
New to CAD / CAM and CNC - thank you for a very good comprehensive overview - concepts explained clearly - even the gotchas!
DayWorks, glad this one helped you! Keep working hard and learning everything you can.
Your instructive style of delivering information and knowledge is PERFECT!
JohnCHansen, thanks brother! Glad you liked this one.
Yes!!! I graduated. 😁😁 Kidding aside. Well Done Video. Easy to Understand. Thanks.
Hal, happy to hear it my friend. Glad to hear it helped.
Sir you are just a genius. I am gonna watch all the videos you have and then decide which CNC to buy.
RTTSOLUTIONS1, Thank you so much for the kind words! Enjoy watching the videos, and I hope they help you make a great decision on your CNC purchase!
Best beginner CNC video I have watched! Garrett, thank you so much.
Tyler, thats great to hear! Glad it taught you the things you need to get ahead in CNC!
Thank you sir!! I'm new to CNC routers and I 'm learning a lot from you.
JaredSC, you are so welcome brother!
Oh man!!! The best invested hour for the last 2 years! Excellent work!!!
Wow, thanks brother! I'm glad it was helpful for you!
@@IDCWoodcraft And many greetings from Serbia!
Wow ! I have never seen this depth of information and explanation on where on youtube I was given a shaper origin 2 years ago for my birthday I liked it because space is an issue and it is portable but nobody explain in detail like you cause a lot of people like me go on the tube to find explanation and at the end of the video you end up blank cause did not understand any of that jargon and wasted you time learning so thank you for that I appreciate .👍
cowboy930, I'm so glad you found my explanation helpful! The Shaper Origin is a great tool for those with limited space and looking for portability.
Thank you! I've learned more in two hours watching your videos than I have in two years of play around with my machine.
Hey Dave. This is a nice comment to read. Tahnk you
Garrett you are the best I am learning alot even thought I don't have a machine yet. I know I will go back to your video again Thank you
Hey Charlie. Make sure you let me know when you get that machine. When is is going to happen?
I absolutely love this video! Will watch it again when I'm in front of my machine.
Christopher, I'm happy to hear it my friend. Glad to see that this video helped you so much.
Hey i'm a newbie CNCer and I wanted to thank you for all these information, I appreciate the tips to use on vectric softwares it saves a lot of time.
Moncefboukhenane7098, glad to help brother! Happy cutting!
WOW THANKS YOU ARE THE MOST CLEAR INSTRUCTOR THAT I'VE SEEN
Vic, wow thank you so much I'm humbled! Welcome aboard to the channel my friend!
Garrett, wish you knew how many times I watch your videos, over and over and over. I have a hard time learning but I stick to it. Thanks sooo much for your help. Just getting started trying to get a drilling path for my spoil board. Good thing you are there to help!
Raymond, right on brother! keep sticking with it and learning. You will be a pro in no time.
My son and I are interested in getting a cnc. This video is great! Thanks!
hailparris, That's awesome! CNC machines are a fantastic way to explore creativity and precision in woodworking, metalworking, or even crafting projects. They can be a great bonding experience for you and your son as you learn and create together brother!
Gonna said wow to your video, this is like 1 on 1 teachings and is a big help for me. Has been subscribed. Thanks
Hongtecklee135, welcome aboard brother! I'm glad the videos have been helpful so far. I'm happy to be a part of your CNC journey and hopefully make things a little easier along the way!
I am at a point in my life where your story hit me..... Hit me hard... I feel a bit more confidant in not only myself but in my dream... I can not support IDC Woodcraft right now. I need to do some things first. I will buy the bits and get the CNC in the near future. Keep up the Great Work Garrett....
Hi Michael. So you are there. As you know...I understand. Write out what you want (not what you don't want), and focus on that every day. You will be amazed at what things look like in 6 months compared to now.
P.S. I bought the Longmill machine Garrett is using in this video and honestly the Science folks have been courteous, polite and extremally instrumental when I got stuck, Thank you Science and you Garrett .
Stevie, glad to hear you like your longmill and the gents over at Sienci have been great too!
By far the #1 video I needed. I am brand new to the hobby and was looking at the Longmill as my first CNC router. Great content.
CaptainBeard, I am so happy to hear that brother! Welcome to the wonderful world of CNC.
Enjoyed the video, very informative. I appreciate the fact that you are furnishing support docs for future help.
Steve, you are so welcome my friend. Happy to hear that you found it helpful.
very good guide for beginners took some of my confusion away
Neville, im happy to hear this one helped you brother!
Exceptional videos. I just bought my CNC a few weeks ago. Have been spending time to figure out the SW (from the vendors tutorials) and then I found your TH-cam videos. WOW is all I can say. Running out now to get some MDF so I can make my spoil board, get it attached to the bed of my CNC. Probably, will use gSender instead of Ready2Control. Enjoy the coffees...
Jay, I'm glad I could help! I'm excited for you to get your spoil board done and for you to get to cutting! Keep up the good work and thanks for the coffees!
Garrett,
Two of my favorite quotes are:
"The Greatest tragedy is a wasted life."
"No one on their death bed ever said, I wish I spent more time at the office."
Thanks for another great video and sharing a part of your life story.
When I was younger, I too was working at a job I hated. I remember my legs
seemingly turning into lead as I walked up the stairs leading to the factory floor.
I finally made the decision to go back to school. It was the best decision I ever
made. After my electronics education I went from laboring in a factory to
working in the engineering department for a local electronics firm. Even though
it was a good job, I still had another yearning to do some creative and technical
writing. Finally, after I retired, I started writing and submitting manuscripts to a
few newspapers and electronics magazines. A long story short, and to my
amazement, they actually paid me for the manuscripts I submitted. - Like you
said, you have to believe in yourself and do what makes you happy.
I wish you continued health and success.
Hey Roger. Isn't it amazing when we do something we want and not 'waste our life'?
Thank you for sharing part of your story. Mark twain said "Don't think, Ddon't try, just do"
Thank you, thank you, thank you. Great teacher, great teaching style.
jh7531, You're very welcome! I'm glad to hear you find the teaching style helpful. If you have any questions or topics you'd like to explore further, feel free to ask!
Thank You so much. I am at the “about to buy” stage and was a bit overwhelmed with the various bits of knowledge required. In this video, you put it across in a very, very, very understandable way, covering wee hints and tips in an extremely competent manner. You have moved me up to the “get to the shops” stage. Look forward to having at look at your other tutorials. Many thanks once again 👍
Jim, I am happy to hear that this video clarified some things for you. Jumping into CNC can be a bit overwhelming, so I am happy to hear that you found this video helpful!
My CNC is finally being wired up tomorrow. It has taken me almost 5 months to find a electrician to upgrade my house for the CNC router I purchased. Day 1 is tomorrow. My semi-retirement is now in the works. Thank you for a great video and some life changing advise.
Good luck for tomorrow Kurt, hope everything goes well ; )
When you first see your CNC machine going through it's motions I'm sure you'll find things pretty amazing, you can finally sit back and say "I did that"!
To create something out of nothing ............... there's no greater satisfaction!
All the best mate ; )
TURK
Well, Kurt, I have responded a day after you left this comment. So, is that bad boy running?
@@IDCWoodcraft It is up and running. Will be making a program and giving it my all. But tomorrow. It was a long exhausting day and want to be fresh. FYI the machine is a Laguna Swift 4 x4.
Garrett... This was a great video... I got a small CNC Router (3018 Prover) and after assymbly was confused by all the software... this video made it easy and I actually cut my first few practice pieces this weekend (yes the circle and square and some others of my own design). I think I watched this video at least 3 times. Thanks for showcasing Gsender... much better, more intuitive software than Candle that was supplied with my machine... what a piece of crap!! Gsender is really a great piece of software!!
Totally hooked on CNC Routering now!!
Cheers!
Steve
Steve, thanks! Glad it was helpful my friend! A lot of folkes tend to like gsender a little better, I'm glad it's been easier for you brother!
I have the same machine as well. I was wondering if you use the z probe with it. Was a little complicated with candle so I used the paper method with mixed results. Wondering if it's easier with gsender.imma try it out later
Garrett is incredible. As a new CNC owner for the first, this video is an outstanding compilation of not only learning CNC but also learning how to use and design in CNC software, the does and don'ts and much more! It is definitely worth the one hour you will spend with Garrett. I will be watching hi other videos to help enhance my CNC abilities. Thank you Garrett!!
Dominick, wow thanks for all the kind words brother. I'm humbled to be a part of your journey. Keep up the great work!
Super helpful introduction to CNC. And I have to say loving gSender!!
Steve, glad you liked this one! gSender is a great piece of software.
Great video learned a lot and you explained everything very clear and nice great job
Thank you for taking the time to explain the process
RV.
renemvargas9427, I'm so glad to hear that! Thank you for your kind words!
I spent 3.5 days trying to figure this out. Finally got it to work. Took 2 computers step by step. Wish there was a book. I am not buying a machine until I can work the VCarve somewhat. I am giving myself 6 months. I used Mastercam when I was machining. So far nothing crosses over. I'm retired and just plan on hobby stuff.
Hi RJ. Wow, that was a bit of a challenge. But I'm glad you got it working. I'm also glad your dealing with first things first. Smart!
@@IDCWoodcraft My biggest challenge was switching the cutter path to the outside. Got er done ! I am trying to figure out how to fillet corners. Mastercam was easy to do that.
Hi Garrett. I`m completely new to CNC Routers. Your explanation of how to use a CNC Router and what to look out for, is just fantastic. Keep up the good work, thanks.
Erick, you're so welcome! Glad it was helpful!
Excellent video tutorial. Clear and concise. I'm new to the world of CNC routers and project design. Your video did just as said in the description. Hats off to you Garrett! Keep up the good work. I am following you.
MichaelMatey, so glad to hear that brother!
Great startup for novice (me). Thanks!! You are a great teacher!
That's great to hear Jeff! Happy to hear that you are all set up on your CNC!
I have a Shaper Origin and many of the terms and processes are very similar. I see a flat bed CNC in my future soon so this has been great to alleviate my apprehension about transitioning over.
hhanger, right on brother. I am excited for you to get a new CNC machine in your shop!
Wow!! I just came across your channel. I am considering getting a CNC machine but have been hesitant because I know nothing about it. As an artist it’s something I’ve been wanting to learn to be able to create wood projects I just didn’t know how or where to start. You make this so simple. I appreciate it. I will continue watching you to learn and save up to buy one. Thanks so much!
Andrew, glad to have you here brother! Everyone starts in their CNC journey where you are now so don't be intimated. CNC machines could be a great addition to your creative toolkit!
I have been really enjoying watching all your videos. Thank you for sharing your knowledge.
Todd, so nice of you! You're welcome my friend!
Thanks you for your information and videos the are abreast tool for all of us new to cnc great job and very much appreciated keep it up l have lot to learn thanks
Joe, glad to help my friend! It's my pleasure to help make the cnc journey a little less confusing! Keep up the good work!
I need a few bits for my CNC and I ordered one from Amazon…….then like a fool realized I should have bought it from you to show appreciation for what you are doing for all of us.
Question…..where can I go buy some bits?
Hey Chris, thanks for your support brother. I appreciate it! You can buy bits off of my website. Here's the link my friend → idcwoodcraft.com/cnc-router-bits-2/
Hi Garrett, I succeeded in cutting the circle and square! It is thanks to you, I am so so happy. Again thanks so much. I’ll try to regularly contribute as if you had Patreon.
Hi Simone. I could see the excitement in your message! I'm so glad to see this. I don't use patreon because it is a pain in the ass. Instead I use by a cup of coffee. It works much better. Here's the link if you ever want to contribute. Thank you
www.buymeacoffee.com/garrettfromme
One of the best tutorial videos I've seen on any subject. Well done!!! I've subscribed.
Jim, wow thanks! Welcome aboard brother!
I am so thankful for your tutorial video. I will be working, learning on small Hammer HNC 47.82 router from Felder, also downloaded Vectric, seems like great software. Thanks you.
Martin, glad to have you here brother! Welcome to the wonderful world of CNC.
Thank you for these videos. I have a longmill on order. I watched 2 of your videos one of them I listened while I was on a 4hr drive. I now feel like I know where to start and how to start when I get my cnc set up.
jessekurisko5659, you are so welcome my friend. Glad to hear that this video helped you.
I loved the point about the two green dots to save time thanks alot
Hey Tarig. It is such a simple little thing to make it go faster.
Thank you for this video I just ordered my Longmill and I always take so much away from your videos
Doug, you're so welcome! I'm glad I could help! Congrats on ordering your longmill, I can't wait for you to get it in hand and see what you create!
This tutorial absolutely great. I will definitely follow your lessons.
Thank you
Clark, thanks for the kind words brother! Happy cutting!
Amazing video I feel fully confident to move into the amazing world of CNC machines thank you
taralovewestwest, you're so welcome! I'm glad you found it helpful and I'm looking forward to seeing what you create my friend! Happy cncing!
Hi I'M A NEW WATCHER OF YOUR PROGRAM, AND FOUND IT VERY INTERESTING .AND I WOULD LOVE TO LEARN MORE ABOUT THE SALES OF YOUR BITS ,
Gary, glad you liked this one brother. Take a look at this video. It should help: th-cam.com/video/wdQ-_hllmKY/w-d-xo.html
Well done! I'm thinking about getting into the CNC area and your video answered a lot of my questions. Thank you.
Claude, thank you and I'm glad to help brother!
I've got a yeti smartbench coming so now I have to learn! I'm a software engineer so I'm comfortable with computers but am coming to this completely green. This was the most helpful video, and done in a way that I really understood. I now understand the process and can build on that while waiting for my machine.
Cameron, right on brother! I'm excited for you to get your machine and get started! I'm not sure if you've already seen the PDF I've put together for beginners yet. But, it has a list of all the videos I've created in order so that they are easier to find when just starting out. I think you'll find it super helpful! Here's the link if you wan to check it out →bit.ly/3mLHGfI. I think your background as an electrical engineer will definitely be to your advantage! I'm excited to see all the awesome things you create.
Outstanding video. For a beginner, it's just what I've needed.
Lester, glad to hear it got you on the right track my friend.
Great video. I watched the entire video - even though I knew most of this already.
There are a few things I think you will want to try.
Thin double sided tape instead of CA-glue:
Do not use double-sided foam tape, because it'll make your Z-homing inaccurate.
(which matters a lot if you're milling metal).
When using thin double-sided tape, you will still need to sandwich it between masking tape, but it'll be easier and quicker:
1: put the 3 strips of masking tape on the bottom-side of your board.
2: put the 3 strips of double-sided tape on top of the masking tape (in the center of the masking tape if the double-sided tape is narrower)
3: put the last 3 strips of masking tape 'upside down' on top of the double-sided tape.
4: Flip the board and put it whereever you like.
Another great tip I got from someone, is not to "plunge" the router-bit into the work piece, but instead slowly lowering (sinking in) while routing (for instance if routing in a line, at the beginning of this line, the bit is just touching the top of the work piece, but at the end of the line, the bit reached the desired depth).
If making a 20mm diameter hole, you might want to use the above technique combined with a bit that's less than 20mm, so that - say a 12mm bit will be cooled better as there's more air around the bit while it's routing.
(in other words: smaller bits might last longer if doing two passes than larger bits using only one pass).
If routing hardwood, compressed air can be used to cool the bit.
The last 3 tips do not apply to wood as much as metal, but I find them worth mentioning if someone can benefit from them.
HiSpy, wow thanks for such a thoughtful response and the tips my friend. I'll be sure to try these out!
@@IDCWoodcraft I'm happy to help - I enjoyed your video a lot. =)
Note: Some cheaper CNC routers use threaded rods. These can get stuck and are also inaccurate (they're not ideal for CNC machine). Getting a lead screw (or preferrably a ball screw) is a much better choice.
-Then again ... a threaded rod is cheap and most people can afford that when just starting and learning the machine.
... So if at some point the machine is acting up, check to see if it's caused by the threaded rod and change it to something better if it's time to "upgrade".
Garrett, thank you so much, I was struggling and getting annoyed
You guided me in the right direction, heading out to my longmill and see if we can be friends again, lol
Thanks again
Hey Nelson. Thin of your longmill like a girlfriend. You have to smooth up to her. Get to know her quirks. This video will get you in the right direction.
If you're in any Facebook groups, maybe you can share this,. I mean, if you had the frustration, others do too.
great video, thank you for sharing, yes I will be watching it again!
BillWyss-z9y, Thank you so much for your kind words! I'm glad you enjoyed the video and found it worth watching again.
Hi Garrett, I hope this finds you in the very best of health, It has taken a long time to find your site but well worthwhile and I have spent many hours watching and learning just one small thing could you please number each basic video as I'm sure all who search out the basic would find this an advantage especially if they are like me and review some many times. keep up the outstanding work and thanks very much
Hi Russell. Yes, the order is becoming an issue. Rather than number the videos (that would take a long time editting each one), I will be setting up my website and putting out a sheet that lists them in order.
Awesome video tutorial, thank you Garrett
David, you're so welcome! Glad to help!
So I'm now moving last week's house number video to my second carve attempt. Thanks G!
Hey James, you got it. So glad your following. You will save yourself so much time and frustration.
Thank you - this was incredibly clear and concise. This video alone will save me from making a ton of mistakes.
I'm awaiting delivery of my first machine and this will let me start off on a solid footing. Great job!
John, you are so welcome my friend! Congrats on your new machine.
Great video and great explanation! You do a nice job! When I get a minute to breathe, busy busy before the holidays, I'll be diving in deeper on your videos (and the CNC for that matter).
Hey Todd. I'll be here making more for you!
I cannot express how much this video has helped and cleared all most common questions I have as a beginner. Thank you and hopefully we can still get more videos.
Jashuad, you're very welcome! There will be more to come my friend!
Thanks for sharing your stories. Thanks for your excellent tutorials on CNC from a fellow Longmill owner.
Hey Gary (and brother Longmill owner), thank you for the compliment on the videos, and you are welcome my friend.
Hello, thanks for all the tips and shortcuts you are teaching. I’m 60 and always been fascinated computers and cnc machines, enough to get my self to built my own to learn everything possible I can, quick as I can.
I have the same feeling on your side personal moments shared story. Keep your Glock or whatever it is on your safe and have it ready for the apocalypse, but for now there’s lots of kids (and old kids) that needs and appreciates you. You are doing good to the Universe!
Hey Mauricio. CNC and computers are a lot of fun, for sure. I promise my friend, the gun will be kept very safe as it always has been.
Thankyou. Loved this video. Will watch again.
Ftoobs, I am glad this video helped you brother. Watching it a second time should really let it sink in.
Great video easy to follow even for someone like me that's not too swift when it comes to computers
Rodney, thanks brother. Keep up the great work over there, you got this!
Thanks for this video. I finally understood many doubts related to different topics👍
I'm glad to hear this Adrian. It is alway the confusion that gets us in trouble.
55 excellent minutes!.
Jose, thank you!
An awesome video certainly cleared lot of the fog! Thanks Garrett.
Hey Rob. Good. What do you think helped the most? These questions always help me make better videos next time.
Thanks!
GregVandamme, You're welcome! I'm glad you found it helpful and thank you very much for the support my friend!
Really enjoyed this video. I watched so many but this one is brilliant. Great job thank you. Only one thing. I have CNC without touch probe. Have you got any video how to setup without it?
TheDzezik, Here is a video on how to zero your machine that I think will really help you: th-cam.com/video/UaDMzl_ZXVg/w-d-xo.html
Amazing guy, great explanation… so clear 😊
Speloto, glad you liked this one brother! Happy to hear that it helped you.
Thank you for taking your time to share your knowledge. I am considering the purchase of my first cnc and I am considering the Longmill MK2. Only thing holding me back is the lack of info for Rotary for the Longmill MK2. That seems to be with all the desktop models of CNC. I even looked at AVID CNC and those cost for AVID are out of my current reach price wise.
Your advice about doing an air cut first is spot on. At the current market volatility hardwood is expensive I paid $ 3.30 BF 4/4 S3S Red Oak last year 2021. I paid $1.95 in 2020 I paid as of Wednesday March 2 2022 same Red Oak was 9.95 BF. I paid 16.72 BF 6/4 Hit and miss (S3S) Maple. A mistake on the hardwood can be costly at current prices.
Hi Jwar, thats a great point about the Longmill lacking a 4th axis! Do you have a project that you need the 4th axis for?
The big issue with desktop CNCs is the lack of gantry clearance required to install a 4th axis properly. You also might run into issues with the Z travel not being high enough and crashing the end mills into the rotary table.
My mentee has an Avid and considered putting a 4th axis on his CNC but I convinced him that unless he needed it for a very specific project, it would be best to save the money.
You could also consider doing your projects out of some other type of wood! I agree with you completely about the prices man! Even finding some 4/4 S4S maple I need for some of my projects has been a total pain!
@@IDCWoodcraft Thank you for the reply and the insight. As for the 4th Axis aka Rotary. It is more of a luxury addition now that I think of it.
I watched several videos doing laser engraving on Cup , Glasses and other cylindrical items. As a Veteran During my years of service in the Navy as a Seabee I would how do I say this have Adventures in Alcohol and have many tokens from that period in my life. Some of the items I have are Beer Glasses / Mugs that have the Navy Mascot The Goat on them and as I knew many People from the Various Branches I also purchased Beer Glasses with those service branch Mascots such as the Marine Corps, Bulldog, The Army, Mule and the Air Force, Falcon so when my friends were over they would not feel left out. I even have a CSUMB glass or two from when I worked at the State University.
Recently a friend was over my house and saw my collection and made the statement that It would be nice to have a set of those or even some mugs with the mascots. So It got me to thinking why not make them as in laser engrave as those glasses I have are about 20 years old and are not available for purchase. I can buy clear glasses and mugs and engrave them for Currently serving Service Members and for any Veteran possibly wanting a set or just one for keepsake. Plus I know some Fire Fighters the possibilities are endless even to the point of personalizing the glasses with name, rank, branch.
I also walk with the assist of a cane and it would be nice to crave or engrave a custom image onto a cane. The world is what one makes of it and I want to make it an even better place and bring happiness where I can. Edit: As for the Longmill MK2 I have seen on the Sienci Labs website the addition of a laser and that has me thinking I can get a CNC and a laser engraver in one package , with rotary the sky is the limit as there can be work arounds as a recess or opening in the table top with careful thought can be done. J
Garrett,
Great video as always. Thanks for explaining everything it is really appreciated.
You're so welcome brother! I'm glad it was helpful!
Well @#%$ happens, broke 2 bits immediately, but, I did figure out to run the project with the z axis high so as not to ruin the project wood. 3rd try was a charm and have been running successful ever since. Your videos are great for some but when I contacted you you wanted me to slow way down. I am not wired that way and my best teacher has always been me. I appreciate your videos so thanks the videos and for your time you took to make them. I do pick up tid bits here and there from you as I am subscribed and do keep up with you and your videos. Lets face it even with these videos you will make mistakes it's just part of the learning curve, thanks
Stevie, third time is the charm brother! Glad to hear you got it figured out and you on your way to making amazing projects.
I'm getting started and this is super helpful. Many thanks for sharing your knowledge
wesleystaurt1100, you are so welcome my friend.
You caught up with me 🤠. I was embarrassed to admit that I have been unsuccessful in even making a line. Always some glitch. This one is a winner 🏆. However, I like the short ones too because then I have coffee ☕ with you in the morning 🌅.
It think it's time for a Bill and his coffee video. One shortie coming up
@@IDCWoodcraft It's perking now! 👍
Hi Garrett. A couple of comments. First, brand new to CNC’s, made my first cut yesterday (surfaced a spoil board on DIY machine). Second, if my high school teacher’s were as good as you I might not have spent 30 plus years working in a factory. Thanks. Third, I played with gSender for a couple of days, I like the ease of use but it’s a bit buggy and UGS absolutely refuses to connect to my machine (probably something I’m doing or not doing). OpenBuilds Control is playing well with my set up so far and I’m hoping one of the free CAD/CAM software’s is something I can figure out. Thanks again for taking the time to teach me.
This Old Man, congrats on making your first cut brother. And thanks for all the kind words, I'm humbled and glad to be a part of your CNC journey. Those are all great points brother, sometimes gSender and UGS get both buggy. It's figuring out which one is the less problematic and frustrating for you and your machine at the end of the day, one should work for you pretty well. Keep up the work my friend!
@@IDCWoodcraft hi again. Thanks for the response. Question. After surfacing I can feel some slight (a couple thousand’s deep) ridges in the spoil board. How smooth does my surfacing process need to be?
@@thisoldman7142 If you have ridges in the spoil board that means the machine is slightly out of tram. In other words the router is not absolute perpendicular to the table bed. Very slight ridges are okay but you want to get as much into tram as possible
I've been using Carbide Motion up till now but being a big Garrett fan I thought i'd give G sender a try. I really like it and have even started using my Triquetra touch plate again which was just gathering dust. A big thanks to Garrett and Sienci.
Hey Bruce. Gsender is pretty awesome compared to the others. I'm glad you switched.