The most important distinction is between an ink-jet printer (like most of us have at home) and a laser printer or photocopier found in an office or retail print/office center. You can actually make transfers with either, but you get different results, and the black and white photocopy or laser print tends to produce cleaner results. Photocopies and laser printers use a powdered heat-set toner, versus an ink that needs to dry.
Also, environmental conditions - temp and humidity - make a huge difference in setup time. In the winter especially, i had to wait a lot longer to work on the second stage of the removal - overnight is good.Have fun. It is great when it works.
a lot of our discussion (internally) is around coated papers. The greatest challenge with making a specific brand recommendation is that we don't control the specifications or quality of the paper mills. Even if we found something that worked perfectly in our lab, it could change or vary greatly from what you find in the store.
...also the fluid measurements are very dependent on size, texture, absorbency and your working environment. The key concept is even coverage and complete contact (which Melanie does a nice job of emphasizing in this video)
I have tried this several times, with minor adaptations, but always with ghastly results. I'd so love to learn to do this well. I have several projects I would use it on if I could only achieve acceptable results.
Lori, - it's really not strange that it works on plexi, which is probably acrylic. Glass is extremely hard and very different materail., Adhesion on glass will be a challenge for any waterborne paint. If you call our tech support group, they might have some ideas on how to work around it.
Hi, that is so helpful! I need to make a very large transfer on canvas (3 meters wide). would it work by using a blueback poster (like those for billboards)? thank you in advance
Great video ,my question is once you have transferred the image and it dries , can you then go in and paint over it with either acrylic or oil paint and will it stay on .?
The quick answer is yes - you can paint over it with whatever you like. Practically zero issues with acrylics, with oils you may want to consider our recent guidance on painting with oils over acrylics: justpaint.org/revising-our-recommendations-for-using-oils-over-acrylics/
I have tried quite a few. Results depend on the paper structure - fibre type, directionality, sizing, plasticizing, and so on. It is not simple I agree. Some rice papers never come off; some cheap drawing paper is excellent.
Our tech team has worked with Melanie on this and may be providing additional instruction on how to do this. There are, however, a lot of variables that effect the timing. This video is a bit clearer than the first one with respect to the time needed to allow the image to cure. The best recommendation we can make is to practice on small test pieces until you have the right combination for you.
-- Yes, this should work the same with Gloss, Semi-Gloss or Matte, though the times may vary slightly, matte may dry a tad faster than gloss. You just need to practice with whatever you use and learn to adjust for all the things that influence timing (like the absorbency of the surface, temperature and humidity, etc.)
Great video! My question is would I use the polymer medium on glass the same way Melanie used it on plexi? Or is there another medium that works better?
Maya - we have another video that may help some, see our "success with fast image transfers" video -- as for your two issues, #1 it can be hard to remove the paper, depending on how long it sits there and the type of paper used. #2, wetting the surface softens the acrylic and can make the image vulnerable so you have to be careful.
Melanie uses two different fluids, Fluid Matte Medium on the textured surface and Polymer Medium on the plexiglass. Most acrylic mediums will work, including our Regular and Soft Gels in Gloss, Semi-Gloss or Matte, and they can be found just about anywhere Golden Artist Colors products are sold. Use the locator on the Golden website to find a store near you.
Jennifer, that is a really interesting question. I think it would depend a lot on the type of pencil used - I suspect you would get a good result with a charcoal pencil, and maybe a fair result with a graphic pencil, but not with a colored pencil or china marker as the acrylic won't easily "grab" those marks. Regardless of the pencil used, the best way to replicate this technique would be to do a toner-based photocopy of your pencil drawing and then follow the steps shown. But you should experiment and do some small tests to see if you can make a transfer directly.
Results depend also on the kind of paper you use- the cheaper the better. You want a paper that is going to disintegrate when it is wet - the opposite of what you usually think about art substrate quality! Don't use "premium" anything.
Hello Eric, the best way to learn whether a transfer technique will work on a surface is to do a small test piece. However, I suspect that acrylic medium will have difficulty adhering to genuine gold or silver leaf. As always, you can email help@goldenpaints.com for an answer from our product support team, they'll certainly know this one.
I've been trying to transfer an image to a Bluecrab shell with mod podge. I've tried to make sure it comes in contact with all the crevices but its just not coming out right and I keep rubbing off parts of the picture. Any tips on what to use and how better to transfer to textured surfaces? any suggestions would be greatly appreciated. thx
We recommend you follow the process for any acrylic painting, utilizing a mixture of Soft Gel Gloss and water to create an isolation coat then applying a removable varnish (with UVLS) with your preference for finish (gloss, satin, matte). Details and directions are in this video: th-cam.com/video/6jS3Rjd5P1g/w-d-xo.html
Hi! I bought a Golden Gel Medium (Gloss) and aplly to a bamboo plate. I put the gel on bamboo plate then place the printed image down on the bamboo and use a roller to press the bubble out. The gel dries out so quickly before I place the paper (only in 30 secs) and the paper doesn't really stick on the bamboo. When I rub the paper off with water gently, there's so many parts were rubbed off. May I know the solution how to get a clearer transfer? Thanks! *I tried to apply the gel medium bit by bit and stick the paper bit by bit to shorten the drying time but it still doesn't really stick. Also tried to apply the medium on both paper and bamboo plate....
Hello Cykler, I would start with this video that has more tips on successful image transfers: th-cam.com/video/K_cfJoJYQvU/w-d-xo.html - and please feel free to contact our product support team (help at goldenpaints dot com) with your questions.
You should contact our technical support team. You'll have adhesion issues with glass, so you may need to add something to improve adhesion, or it may not even be possible on glass. Just call or e-mail them, they'll help you (and it's free).
Some inkjet prints can be sensitive to the water and higher PH of the acrylic, causing the image to soften or smudge. But, the quality of inkjet prints have improved in this regard over the years making it possible to transfer in some cases. A small test should reveal whether this is possible with your inkjets. Let us know how it goes!
Hello Gabriela - Melanie uses Fluid Matte Medium because it is an acrylic polymer solution that we have developed and tested for its archival quality, flexibility and compatibility with acrylic colors and other professional art materials. Mod Podge is a polyvinyl acetate solution, essentially the same compound as white glue and completely different (chemically) from acrylic. It is made for the craft market and not expected to have the same archival qualities, compatibility or flexibility as an acrylic medium.
i want to transfer a print on to paper instead of canvas or wood. the paper ideally would be around 300 to 400 gsm. which medium would u suggest i should use for that?
I would have concerns about trying this onto paper because of the tendency of paper to warp. However, if you can successfully complete a transfer onto another pieces of paper, the medium would be the same.
Funny, I was just having a conversation about that with someone in Tech Support. It's not that cut-and-dried. A lot of things will work, and do different things. We're going to experiment with different papers and report on the results.
She says "photocopy". To be really specific, does this mean the machines they have at a place like Staples? Or does it include home / consumer laser printed images? I have had varying results with the laser printer. It seems that the toner in mine is quickly dissolved by the polymer medium.!
The paper is whatever is used at the large format print shop - a place like Kinko's - as far as I know there is nothing special about it, it's like typical copier paper but on rolls.
I am not certain about the need or effectiveness of using photo paper, but a white spot is typically the result of an area that did not have sufficient coverage of medium and/or contact with the surface to which the image is being transferred.
but there still a transfer but, so is it oky i am using medium matte for transfer, i am using photo paper for high quality color than ink jet or photo copy paper?, where can i send my work? i have plenty pictures of failed work where can i show it and helping me for some advise, because i am using it on my business.
Our Product Support Team is always available to help you with any product or application issue you encounter. I suggest contacting them by phone or email (help@goldenpaints.com) and absolutely send them photos to help them understand what you're experiencing.
Yes, Soft Gel Matte, Semi-Gloss, Regular or Heavy Gel... they will all work for this technique and the drying time will vary depending in the absorbency of the support, thickness of your application, and the environment in which you're working.
Yes. Polymer Medium can be used instead of Fluid Matte Medium if/when a glossy finish is preferred. The surface of the actual transfer will probably always be fairly matte because the paper and it's removal will create a matte finish. However, by coating the transfer with any gloss medium you will be able to get a glossy finish.
Hello Jennifer, this demonstration is for a toner-based (black & white) image only. There are toner-based color printers and copiers that may create images that can be transferred using a similar technique and materials, but you'll have to find them and test them to see.
I am uncertain in respect to the image. Other than photocopies, magazine images, inkjet or laser prints would this work e.g. for lithographic images or any other prints (e.g. in old books: chromolithography)? Many thanks!
This demonstration was done with a toner-based print. We can't speak to the other types of prints you mention in your question, other than some (not all) ink-jet prints are water-sensitive and will bleed if put in contact with a water-based medium as shown in this demonstration. The best way to determine what works is to experiment with the materials to find the products and process that work best for you.
Hello Riya, I am not totally certain about your question. The technique as demonstrated utilizes a dry, toner-based (black on white paper) image. There is no white ink, and I am not aware of a toner-based white. The white areas of the image transferred in this demonstration are just paper without toner (or ink) and the primary action in this process is removing the paper from the surface to which the image is being transferred.
Hello Brandy - the answer is yes, but you need to be certain what sort of plex you have and prepare it as recommended in our support guide at justpaint.org/exp (look under surfaces for recommendations on preparation for a variety of materials)
Hello Philemon, a quick search for image transfers in TH-cam will reveal a range of solutions that include techniques using materials other than acrylic fluid or gel mediums. (PVA glue may be the most popular.) For aesthetic and archival reasons, and of course because we manufacture acrylic media, this is our recommendation.
Alex, I have actually heard of places using this technique as a service, but that was local (to Utica, NY) and I would not be comfortable making an endorsement or recommendation for you, not knowing where you live or what you're doing with this. You might ask at your local art supply store, if someone in your area is using this technique extensively your GOLDEN retailer may be able to put you in touch with them.
I'm so confused as to how this works. Were those images printed? And how does the whole thing not rub off when removing the last bit of paper? I guess I'm wondering how the ink transfers and stays behind while the paper gets rubbed off?
Hello Stephen, feel free to ask our product support team any questions you have (help@goldenpaints.com). This image transfer technique uses toner based prints (not ink jet) as you would get from a photo copier or, as in this demo, a commercial large format black and white (again, make sure it is toner rather than ink based) and what basically happens is the acrylic medium grabs hold of the toner on the surface of the paper, and the paper is removed to leave behind the toner (image) on the surface to which the acrylic medium was applied.
This is a great question! They are not the same. Mod Podge is essentially PVA glue (AKA white glue), not an acrylic polymer emulsion. While various formulas have been developed, PVA is generally not recommended for flexible supports (canvas), and it is a craft product, not engineered or tested for archival quality. GOLDEN Matte Medium, like all of our acrylic mediums, is formulated to meet the demands of professional artists.
The answer to your question depends on where you live. The easiest way to locate a GOLDEN retailer near you is by using the store locator at www.goldenpaints.com/store_locator
I’m still confused about how in the first video, the image was able to be peeled and separated from the canvas in one swipe without the need to rub off any excess paper (as there wasn’t any).
NO. - which is to say, technically, you could make it work, but it would not be something you want to wear and it would not hold up to repeated washing. There are materials made for making t-shirts using printer or photocopy images - usually iron-on transfer paper that you put into an ink-jet (which I assume would need to use a waterpoof ink) This technique is for fine or decorative art applications, not apparel.
The same happened with me. On glass, it didn't work at all. It does seem strange that it works on plexi. Problem is, all of our old farmhouse windows are glass
Hello Gonzalo, you'll have to do that research on your own. While we're happy to make materials that help you create illustrations and fine art work, we don't do art lessons or teach any particular style of artwork. But thanks for spending some time on our channel and we hope you find something helpful to your creative pursuits.
I am a beginner painter .I am from Morocco .I am very interested in your products here in Morocco There are no means I would like to see you if you help me .de sent me your products to work and published here in Africa
It doesn't work. The paper sticks in some places and you end up ruining the whole project trying to get it perfect. If it did work she would have shown you the completed project.
It does work, and she shows the completed project at 3:34. You may want to try the similar technique shown in our other image transfer video. It is not as fast, but the timing is less of a factor. Regardless of the technique or materials you use, we encourage you to test, practice and experiment on a small scale before attempting with a large or important project. And, any time you need help, our product support team is available at help@goldenpaints.com
It works when you spend the time needed to understand the process. Do small tests on multiple surfaces until you learn the process. Once you figure it out, move to a larger surface, like wood, canvas, etc.
The most important distinction is between an ink-jet printer (like most of us have at home) and a laser printer or photocopier found in an office or retail print/office center. You can actually make transfers with either, but you get different results, and the black and white photocopy or laser print tends to produce cleaner results. Photocopies and laser printers use a powdered heat-set toner, versus an ink that needs to dry.
Thank you.
Ohhh, I totally love the one with the black branches over the pastel background. What an awesome final image.
IM MOTIVATED AND INSPIRED BY ALL THE POSSIBILITIES. THANK YOU VERY MUCH. Donna
I watched your other video and was impressed. I had not thought of the technique, but it is exactly what I need. Thanks very much Melanie.
I think you are wonderful Melanie! Your voice is great and your directions clear. ALSO, you are ambidextrous! Yay! Brilliant.
Also, environmental conditions - temp and humidity - make a huge difference in setup time. In the winter especially, i had to wait a lot longer to work on the second stage of the removal - overnight is good.Have fun. It is great when it works.
a lot of our discussion (internally) is around coated papers. The greatest challenge with making a specific brand recommendation is that we don't control the specifications or quality of the paper mills. Even if we found something that worked perfectly in our lab, it could change or vary greatly from what you find in the store.
...also the fluid measurements are very dependent on size, texture, absorbency and your working environment. The key concept is even coverage and complete contact (which Melanie does a nice job of emphasizing in this video)
I have tried this several times, with minor adaptations, but always with ghastly results. I'd so love to learn to do this well. I have several projects I would use it on if I could only achieve acceptable results.
I really enjoyed seeing this, learning this process, and now to try it. thanks much.
Lori, - it's really not strange that it works on plexi, which is probably acrylic. Glass is extremely hard and very different materail., Adhesion on glass will be a challenge for any waterborne paint. If you call our tech support group, they might have some ideas on how to work around it.
Hi, that is so helpful! I need to make a very large transfer on canvas (3 meters wide). would it work by using a blueback poster (like those for billboards)? thank you in advance
Not sure what a bubble jet is, but this technique is for dry toner (black and white) based images. Not wet ink (color/ink-jet) images.
Great video ,my question is once you have transferred the image and it dries , can you then go in and paint over it with either acrylic or oil paint and will it stay on .?
The quick answer is yes - you can paint over it with whatever you like. Practically zero issues with acrylics, with oils you may want to consider our recent guidance on painting with oils over acrylics: justpaint.org/revising-our-recommendations-for-using-oils-over-acrylics/
I have tried quite a few. Results depend on the paper structure - fibre type, directionality, sizing, plasticizing, and so on. It is not simple I agree. Some rice papers never come off; some cheap drawing paper is excellent.
Our tech team has worked with Melanie on this and may be providing additional instruction on how to do this. There are, however, a lot of variables that effect the timing. This video is a bit clearer than the first one with respect to the time needed to allow the image to cure. The best recommendation we can make is to practice on small test pieces until you have the right combination for you.
-- Yes, this should work the same with Gloss, Semi-Gloss or Matte, though the times may vary slightly, matte may dry a tad faster than gloss. You just need to practice with whatever you use and learn to adjust for all the things that influence timing (like the absorbency of the surface, temperature and humidity, etc.)
Will this medium work the same way with an pen-ink drawing on transfer paper?
Great video! My question is would I use the polymer medium on glass the same way Melanie used it on plexi? Or is there another medium that works better?
Maya - we have another video that may help some, see our "success with fast image transfers" video -- as for your two issues, #1 it can be hard to remove the paper, depending on how long it sits there and the type of paper used. #2, wetting the surface softens the acrylic and can make the image vulnerable so you have to be careful.
Melanie uses two different fluids, Fluid Matte Medium on the textured surface and Polymer Medium on the plexiglass. Most acrylic mediums will work, including our Regular and Soft Gels in Gloss, Semi-Gloss or Matte, and they can be found just about anywhere Golden Artist Colors products are sold. Use the locator on the Golden website to find a store near you.
Great video - thank you!
Hi. Great video. Do you know if you Can you transfer a pencil drawing to a canvis?
Jennifer, that is a really interesting question. I think it would depend a lot on the type of pencil used - I suspect you would get a good result with a charcoal pencil, and maybe a fair result with a graphic pencil, but not with a colored pencil or china marker as the acrylic won't easily "grab" those marks. Regardless of the pencil used, the best way to replicate this technique would be to do a toner-based photocopy of your pencil drawing and then follow the steps shown. But you should experiment and do some small tests to see if you can make a transfer directly.
Check out the follow up video created by our tech team, if that doesn't help, give them a call to discuss what you're doing.
Results depend also on the kind of paper you use- the cheaper the better. You want a paper that is going to disintegrate when it is wet - the opposite of what you usually think about art substrate quality! Don't use "premium" anything.
Thank you for the very informative video! Question if you think this can be done on a precious metal leafed surface such as silver or gold???
Hello Eric, the best way to learn whether a transfer technique will work on a surface is to do a small test piece. However, I suspect that acrylic medium will have difficulty adhering to genuine gold or silver leaf. As always, you can email help@goldenpaints.com for an answer from our product support team, they'll certainly know this one.
Awesome, I learned so much thank you!
I like that
Can I transfer the images using polycrylic water based clear matte onto a acrylic painted piece of wood or glass?
I've been trying to transfer an image to a Bluecrab shell with mod podge. I've tried to make sure it comes in contact with all the crevices but its just not coming out right and I keep rubbing off parts of the picture. Any tips on what to use and how better to transfer to textured surfaces? any suggestions would be greatly appreciated. thx
very good!! Compliments!!
What would you use to preserve the plexiglass transfer? Would you use a spray sealant or other kind of product to seal the image?
We recommend you follow the process for any acrylic painting, utilizing a mixture of Soft Gel Gloss and water to create an isolation coat then applying a removable varnish (with UVLS) with your preference for finish (gloss, satin, matte). Details and directions are in this video: th-cam.com/video/6jS3Rjd5P1g/w-d-xo.html
Good evening! Would Liquitex gloss flux medium work for a plexiglass transfer instead of the Polymer Medium gloss?
Thanks in advance!
Hi! I bought a Golden Gel Medium (Gloss) and aplly to a bamboo plate. I put the gel on bamboo plate then place the printed image down on the bamboo and use a roller to press the bubble out. The gel dries out so quickly before I place the paper (only in 30 secs) and the paper doesn't really stick on the bamboo. When I rub the paper off with water gently, there's so many parts were rubbed off.
May I know the solution how to get a clearer transfer? Thanks!
*I tried to apply the gel medium bit by bit and stick the paper bit by bit to shorten the drying time but it still doesn't really stick. Also tried to apply the medium on both paper and bamboo plate....
Hello Cykler, I would start with this video that has more tips on successful image transfers:
th-cam.com/video/K_cfJoJYQvU/w-d-xo.html - and please feel free to contact our product support team (help at goldenpaints dot com) with your questions.
What kind of paper was used for the picture to transfer on the plexiglass?
You should contact our technical support team. You'll have adhesion issues with glass, so you may need to add something to improve adhesion, or it may not even be possible on glass. Just call or e-mail them, they'll help you (and it's free).
Will this work for Inkjet images? I find it is not easy to find a Laser Printing service that makes over-sized prints.
Some inkjet prints can be sensitive to the water and higher PH of the acrylic, causing the image to soften or smudge. But, the quality of inkjet prints have improved in this regard over the years making it possible to transfer in some cases. A small test should reveal whether this is possible with your inkjets. Let us know how it goes!
Thank you! I've posters, can this method be done on plexiglass?
Hi Melanie. You are using Fluid Matte Medium, others are using Mod Podge Waterbase Sealer. What is the difference if any?
Hello Gabriela - Melanie uses Fluid Matte Medium because it is an acrylic polymer solution that we have developed and tested for its archival quality, flexibility and compatibility with acrylic colors and other professional art materials. Mod Podge is a polyvinyl acetate solution, essentially the same compound as white glue and completely different (chemically) from acrylic. It is made for the craft market and not expected to have the same archival qualities, compatibility or flexibility as an acrylic medium.
Thank you. I appreciate the clarification.
i want to transfer a print on to paper instead of canvas or wood. the paper ideally would be around 300 to 400 gsm. which medium would u suggest i should use for that?
I would have concerns about trying this onto paper because of the tendency of paper to warp. However, if you can successfully complete a transfer onto another pieces of paper, the medium would be the same.
+GoldenPaints thank u
Funny, I was just having a conversation about that with someone in Tech Support. It's not that cut-and-dried. A lot of things will work, and do different things. We're going to experiment with different papers and report on the results.
She says "photocopy". To be really specific, does this mean the machines they have at a place like Staples? Or does it include home / consumer laser printed images? I have had varying results with the laser printer. It seems that the toner in mine is quickly dissolved by the polymer medium.!
WOWWWWWWWWWWWWWWWWWW
great video what paper was used?
The paper is whatever is used at the large format print shop - a place like Kinko's - as far as I know there is nothing special about it, it's like typical copier paper but on rolls.
i am using matte medium, but it is not perfectly transfer. and there's a white spot on it and i am using photo paper.
I am not certain about the need or effectiveness of using photo paper, but a white spot is typically the result of an area that did not have sufficient coverage of medium and/or contact with the surface to which the image is being transferred.
but there still a transfer but, so is it oky i am using medium matte for transfer, i am using photo paper for high quality color than ink jet or photo copy paper?, where can i send my work? i have plenty pictures of failed work where can i show it and helping me for some advise, because i am using it on my business.
Our Product Support Team is always available to help you with any product or application issue you encounter. I suggest contacting them by phone or email (help@goldenpaints.com) and absolutely send them photos to help them understand what you're experiencing.
can this method be used to transfer on to t-shirts? thanks
Can we use Gel Matte Medium? if so how long would be dry time? Thanks!
Yes, Soft Gel Matte, Semi-Gloss, Regular or Heavy Gel... they will all work for this technique and the drying time will vary depending in the absorbency of the support, thickness of your application, and the environment in which you're working.
Can the polymer medium be used on the canvas for a glossy finish ? if not how can we get a glossy finish on canvas?
Yes. Polymer Medium can be used instead of Fluid Matte Medium if/when a glossy finish is preferred. The surface of the actual transfer will probably always be fairly matte because the paper and it's removal will create a matte finish. However, by coating the transfer with any gloss medium you will be able to get a glossy finish.
Can this be done with a colored image, or just black and white?
Hello Jennifer, this demonstration is for a toner-based (black & white) image only. There are toner-based color printers and copiers that may create images that can be transferred using a similar technique and materials, but you'll have to find them and test them to see.
but what is that white liquid and where can I buy it.
I am uncertain in respect to the image. Other than photocopies, magazine images, inkjet or laser prints would this work e.g. for lithographic images or any other prints (e.g. in old books: chromolithography)? Many thanks!
This demonstration was done with a toner-based print. We can't speak to the other types of prints you mention in your question, other than some (not all) ink-jet prints are water-sensitive and will bleed if put in contact with a water-based medium as shown in this demonstration. The best way to determine what works is to experiment with the materials to find the products and process that work best for you.
Hi, How do I clean my brushes that has hardened?
Can we transfer the image on canvas
would white ink of the pic would also transfer color on canvas?
Hello Riya, I am not totally certain about your question. The technique as demonstrated utilizes a dry, toner-based (black on white paper) image. There is no white ink, and I am not aware of a toner-based white. The white areas of the image transferred in this demonstration are just paper without toner (or ink) and the primary action in this process is removing the paper from the surface to which the image is being transferred.
Can this technique be done on plexiglass with a lazer copy?
Hello Brandy - the answer is yes, but you need to be certain what sort of plex you have and prepare it as recommended in our support guide at justpaint.org/exp (look under surfaces for recommendations on preparation for a variety of materials)
@@GoldenPaints hello I so appreciate you taking the time to respond to my question Thank you
can I use any type of glue?
Hello Philemon, a quick search for image transfers in TH-cam will reveal a range of solutions that include techniques using materials other than acrylic fluid or gel mediums. (PVA glue may be the most popular.) For aesthetic and archival reasons, and of course because we manufacture acrylic media, this is our recommendation.
I have tired several times with the soft gel matte medium and getting horrible results
Yeah awesome.
So this will work with a laser printer with black toner?
On a painted surface? I hope.
Yes, a photocopier or a laserprinter - devices that use a dry toner system, rather than a wet/ink system.
if i cant end up being able to do this myself, would you know any places that I could pay as a service to do it for me?
Alex, I have actually heard of places using this technique as a service, but that was local (to Utica, NY) and I would not be comfortable making an endorsement or recommendation for you, not knowing where you live or what you're doing with this. You might ask at your local art supply store, if someone in your area is using this technique extensively your GOLDEN retailer may be able to put you in touch with them.
Alex, I am an interior designer from the Chicagoland area and can complete this. Let me know if you are interested.
I'm so confused as to how this works. Were those images printed? And how does the whole thing not rub off when removing the last bit of paper? I guess I'm wondering how the ink transfers and stays behind while the paper gets rubbed off?
Hello Stephen, feel free to ask our product support team any questions you have (help@goldenpaints.com). This image transfer technique uses toner based prints (not ink jet) as you would get from a photo copier or, as in this demo, a commercial large format black and white (again, make sure it is toner rather than ink based) and what basically happens is the acrylic medium grabs hold of the toner on the surface of the paper, and the paper is removed to leave behind the toner (image) on the surface to which the acrylic medium was applied.
this may sound stupid but is matte medium the same as modge podge?
This is a great question! They are not the same. Mod Podge is essentially PVA glue (AKA white glue), not an acrylic polymer emulsion. While various formulas have been developed, PVA is generally not recommended for flexible supports (canvas), and it is a craft product, not engineered or tested for archival quality. GOLDEN Matte Medium, like all of our acrylic mediums, is formulated to meet the demands of professional artists.
Which stores carries Golden Matte Medium?
The answer to your question depends on where you live. The easiest way to locate a GOLDEN retailer near you is by using the store locator at www.goldenpaints.com/store_locator
I’m still confused about how in the first video, the image was able to be peeled and separated from the canvas in one swipe without the need to rub off any excess paper (as there wasn’t any).
Would Modge Podge work instead of the Fluid Matte medium?
Hello Neha - that would be a different (non-acrylic) product and process, not something we can really help you with.
NO. - which is to say, technically, you could make it work, but it would not be something you want to wear and it would not hold up to repeated washing. There are materials made for making t-shirts using printer or photocopy images - usually iron-on transfer paper that you put into an ink-jet (which I assume would need to use a waterpoof ink) This technique is for fine or decorative art applications, not apparel.
The same happened with me. On glass, it didn't work at all. It does seem strange that it works on plexi. Problem is, all of our old farmhouse windows are glass
I want to know how 1880s artist or ilustrators used to work art noveau
Hello Gonzalo, you'll have to do that research on your own. While we're happy to make materials that help you create illustrations and fine art work, we don't do art lessons or teach any particular style of artwork. But thanks for spending some time on our channel and we hope you find something helpful to your creative pursuits.
I am a beginner painter .I am from Morocco .I am very interested in your products here in Morocco There are no means I would like to see you if you help me .de sent me your products to work and published here in Africa
hi. How can I transfer my drawings unto canvas without using graphite or having to trace it over
Watch this video?
Tavish - just about any standard paper used in a photocopier or laser printer will do. Nothing special is needed.
It doesn't work. The paper sticks in some places and you end up ruining the whole project trying to get it perfect. If it did work she would have shown you the completed project.
It does work, and she shows the completed project at 3:34. You may want to try the similar technique shown in our other image transfer video. It is not as fast, but the timing is less of a factor. Regardless of the technique or materials you use, we encourage you to test, practice and experiment on a small scale before attempting with a large or important project. And, any time you need help, our product support team is available at help@goldenpaints.com
It works when you spend the time needed to understand the process. Do small tests on multiple surfaces until you learn the process. Once you figure it out, move to a larger surface, like wood, canvas, etc.
This a gimmick done a thousand times....
Hello John, it's not clear how this is a "gimmick" - but is been done much more than a thousand times. Thanks for checking it out.