Hi there, During configuration for VFD I have problem to find P01, P02. I only got uP0, uP3, uP4, uP5, uP6. Sir, please tell me How to change these uP code to P code in VFD CNC 6040Z 4 axist. When I tried to reset factory setting but still an error 40 appear. Then it is still unable to get P code again. Thank you sir
I have the same 6040z USB it doesn't work with me i tried 6 pcs and laptops also same .. I use windows 7 64 bit with mach3 and Vista 32 bit also with mach3 same issue could u plz tell me what should i do if there is tips i have to do. Thanks
@@opaarduino5595 could you tell me how to install and config ? i have buy 6040z from this company but it doesn't work. work only in laptop but machine not. when i electriced the controller, the all motors not selflock. thanks for you kindness for help me.
+dada lala Thay don't have control for the spindle. Actualy thay don't have control at all! I bought one 6040 CNC from this company, the control box was comlite garbige! Better bye Geco ;)
+dada lala Did you got the cnc from LY Group, I did and it does not work :( Yes it will be cool if you can control the spindel from Mach3, but this model had no such option.
Hi there,
During configuration for VFD I have problem to find P01, P02. I only got uP0, uP3, uP4, uP5, uP6.
Sir, please tell me
How to change these uP code to P code in VFD CNC 6040Z 4 axist.
When I tried to reset factory setting but still an error 40 appear. Then it is still unable to get P code again.
Thank you sir
Very nice
I have this cnc but when use mach 3 with soft limit not detect limit switch, why?
Just putting it out there, I will not refuse a free machine if you insist on having me do an English commentary. But only because it is you.
Always e stop this 6040z but nobody helping me well
I have the same 6040z USB it doesn't work with me i tried 6 pcs and laptops also same .. I use windows 7 64 bit with mach3 and Vista 32 bit also with mach3 same issue could u plz tell me what should i do if there is tips i have to do. Thanks
opa arduino
ciao che laptop usi?(hello,do you portable use?
@@opaarduino5595 could you tell me how to install and config ? i have buy 6040z from this company but it doesn't work. work only in laptop but machine not. when i electriced the controller, the all motors not selflock. thanks for you kindness for help me.
@@opaarduino5595 i use laptop windows 7 32bit
what is your pins and ports set up for the spindle motor?
+dada lala
Thay don't have control for the spindle.
Actualy thay don't have control at all! I bought one 6040 CNC from this company, the control box was comlite garbige!
Better bye Geco ;)
+AleksP681 that sucks. I got my spindle control to work through mach3 input. you need to make adjustment to the vfd
+dada lala Did you got the cnc from LY Group, I did and it does not work :(
Yes it will be cool if you can control the spindel from Mach3, but this model had no such option.
dada lala huhhbu
Nice screen text. The vocal commentary is outstanding. I wonder if can get a refund for the electrons used to make this video.
she's wreck weth small stone?
u machine seller company ?
canghiih
can this cut carbon fiber sheets?
Of course it can,what's your e-mail box? mine is sales@usbearth.cn
@@LYBGACHINA good
Will it fit for pc plates or its too small?
Quite :) nice
Hello,you can send e-mail to sales@usbearth.com ,then will have special sales contact with you from LY.GROUP.CHINA.thanks a lot!~