Hi 👋, Tomislav, That looks like a great machine, money well spent, I have a very old Wadkin RS8, with inverter drive, and Kontour 1500 SA , I wish you all the success for the future , And you soon be earning some extra pennies, or euros, or dollars, And look forward to seeing a new project being turned on it, stay safe, Phil from the moulin France .
"it ever happen to you that you're changing your shop layout a little bit and you came across stuff like this. and then you start to curse the one who made that job a lot harder than it should be, then you realise that was you actually." sadly a story I am all too familiar with! enjoy the new lathe mate!
Hi Tomislav, I remember unboxing my Axminster 406 I was like a kid in a sweet factory, it’s lovely when it’s all put together and you finally can start to turn, happy turning mate.
congratulations ! I bought my dreamlathe 1991 also from Steiner. It has some features in common with your lathe. 2 horsepowers, distance between centers, hight over bed. But no electronical device, just 3 mechanical speeds and a two-speed 3 phase motor. Last summer I had to chance the bearings for the first time. And I did get very good advice from Steiner as how to change the bearings, step by step. With Steiner you are truely in the best hands.
Good evening Tomislav from Tennessee USA. I "stumbled" onto your channel a few hours ago and have enjoyed several of your videos and liked each and everyone of them. I feel your joy with the new lathe...I'm on my 3rd now which is a gently used Jet 1642. Hope you had a very Merry Christmas and I will see you in the next video.
Thank you very much for watching my videos and support what I do....1642 was on shortlist but was little expensive to buy here in Europe, but I love that lathe ... Hopefully I'll visit United States one day... Merry Christmas to you and your family
Hi Tomislav, congratulations on getting your dream machine! We can see the excitement in your actions and hear it in your voice, very happy for you and looking forward to what you will create👍 I started turning when I retired 2 ½ years ago on an old 1954 Canadian 10” Beaver great little lathe. I saw a deal that I couldn’t pass up on an 1980 18” Canadian General sitting in a barn, I brought it home and cleaned it up, put new bearings in it and converted it to VFD my dream was fulfilled. Still learning and it is the most rewarding hobby for me. Take care, Wayne
Awsome Wayne, that sounds like great find, I've seen on several videos general lathes,they look like extremely well build machines.... Thank you very much for watching and support
Happy days and congratulations. Thanks for introducing a manufacturer of which l have not heard and what looks like a fantastic lathe. If l had a wish list it would have to go on it. Have fun and look forward to many more great videos using it
Congratulations, you deserve it! Such a humble man with an incredible skill set. I bought my dream lathe, a robust American Beauty recently, now I have to develop the skill set.
I'm so chuffed for you. Such a machine is beyond my means, my turning being occasional, in conjunction with furniture making and restoration. someday maybe..someday.Thanks for posting.
Enhorabuena!!! una fantástica adquisición. Solo al alcance de los profesionales o de los que les sobre el dinero😂😂. No quiero decir que el torno anterior sea malo, ni muchísimo menos, pero un killinger es otro nivel.... Deseando verlo funcionar y verte trabajar en él y con él. Perdón si la traducción no es buena, es de google. Congratulations!!! a fantastic acquisition. Only available to professionals or those who have extra money😂😂. I don't want to say that the previous lathe is bad, far from it, but a killinger is another level.... Looking forward to seeing it work and watching you work on it and with it.
Congrats, that is an awesome lathe. And you are always a humble man. Thanks a lot, for what you are showing here on this channel. Pozdravljam iz Češke i sretan Božič.
Very nice! I know how you feel I got a new lathe this year also. I picked up a Recond Power and like it very much. Wish you the best of luck and joy with your new lathe!! Thank you for sharing.
Je suis très heureux pour vous Tomislav : Une passion, un rêve, un beau jouet aussi, un très bel outil de travail ! J'ai ressenti cela aussi quand j'ai upgradé et équipé mon tour avec les derniers perfectionnements que permettent la technologie : c'est une sensation vraiment confortable, agréable et inoubliable. Régalez-vous, régalez-nous, travaillez bien (pas trop tout de même) ! ☺ Patrick
Well, never heard of this lathe, and never had a chance to play on one. One thing I like is the 3 speed ranges, rather than 2. The mid speed range goes high enough for smaller bowls, and slow enough to core with. With a 2 speed lathe, they tend to not like coring in the high speed range. I do prefer slower minimum speed, like 10 to 15 rpm. The reason for that is that I like once turned bowls from sloppy wet wood. I let them dry and warp, then sand them out. I need that very slow speed so I can power sand with the lathe spinning. Most of the lathes over here turn off at 50 to 100 rpm. I asked one tech about it and he told me that if I ran my lathe that slow I would fry the electronics and ruin my lathe. I told him that I had sanded out thousands of bowls at that speed and never had any problems. He again repeated his first statement. I did get an American Beauty from Robust, and got the same concerns from the owner. He walked me through the steps to get the speed down so I could sand my warped bowls. He cautioned me about the heat issue. I found out my lathe ran cooler when I was sanding than it did when I was turning. I do make my lathe work when I turn bowls. I am a big fan of the pivoting headstock with my Vicmark 240, and the sliding headstock on my AB. It allows me to slide the headstock down or pivot it so I can stand up straight to turn. People that turn on long bed lathes use some what different mechanics than those who turn on short bed lathes. It just works better for me. One concern I have with the sliding headstocks is the pressure plate on the bottom of the headstock. My first sliding headstock lathe was a PM 3520A and it had a cast iron pressure plate which broke when coring some black locust. They replaced that with a steel plate that was about 4 by 6 inches, which is sufficient. My American Beauty has a plate that is the same size as the base of the headstock. Probably more than it needs. I saw one lathe, 24 inch diameter capacity that had the same plate on the headstock as there was on the banjo and tailstock. Not good. Hope you have a big plate on yours. Have fun with your new lathe!
Hello Tomislav....great video. I followed along with shared excitement for your new lathe. But watching your skill on turning that bowl was equally excellent. I turn bowls on my old Rockwell/Beaver lathe( that I converted to variable speed),but what you do in minutes takes me much longer. Thanks-- looking forward to seeing new videos with your new lathe.
Emergency stop switch. I would only use it for Shutdown after finishing your day and of course any Emergency situation. It should stop the power from going to any part or the lathe. Very nice machine, Tomislav.
Hello, congratulations. That lathe is beautiful. It seems to be very robust. I am very impressed. I live in Connecticut, USA. I make jewelry boxes, and keepsake boxes. I am saving for a new bandsaw. I am exited for you. New tools are a treat these days. Thanks for the videos. Your friend, Earl
Congratulations Tomislov ….. I could not be more excited for you! You deserve this fine machine and can’t wait to see all the fine projects you will share with us. Thank you for sharing the unpacking of your dream 🙏🏼🤠🇨🇱
Congratulations on getting your dream lathe! I have a robust sweet 16 and your lathe has all of the featues as mine. Both are high quality machines and will easily be functioning perfectly when your grandchildren take over your business many years from now! Oh, and always, I enjoy watching a production turner working at his trade! No wasted motion and light touches with strong hands!
Tomislav, You are a blessed guy. What a beautiful lathe and this is a great video of it. I had a Stratos CO 230 lathe that I recently sold due to health problems. Really regret it now since I am much better. This one seems like a step up from the Stratos and like you said, a dream lathe. I am in the USA and I will be investigating availability here. I hope they have service here if they sell in the US. Although I did not have any problems with the Stratos, service became unavailable. Thanks for a great review.
Sorry to hear about your health, hope its all ok now? I think Steinert company send worldwide so send them email, say you saw it in my videos and they can probably sort something out.... Not sure about service however Steinert has great customer service so if ever something happens you should be covered.... But check with them ofcourse about all the details
Congratulations on your new lathe. It has some nice features, and excellent quality and craftsmanship. If I could, I would definitely buy one. Looking forward to seeing your new videos with this lathe. Like always I enjoy and learn a lot from your videos. Thank you.
I started turning at Xmas my Mrs bought me a bench top midi lathe,adjustable speed which got me hooked .I have already thinking of upgrading as the1/2 horse power motor struggles cutting bowls which I have fallen in love with.
Congrats on new lathe 👍🏻 I contacted Steinert about a year ago for a new lathe myself. But when I was quoted a higher price than listed, and also they wanted pre payment with almost a year lead for delivery, it scared me away. Now happy camper with a new Vicmarc. I enjoy your videos. Keep it up 🎉
Not sure what happend, can't speak in there name, however vicmark is one of my other dream lathes and such a good machine as well.... Thank you for watching
Nice one Tomislav, that is a great lathe,... enjoy it all the way and bring out new good work,... all the best from Portugal, hugs for the all famaly,...
Congrats bud! You are flying! What an awesome machine! You are going to love working on that. I bet you went back tp your workshop at least once to confirm it is really there. This day was a Good day. 👌💪
What an amazing lathe, hope to see many projects in the future. Most of us can personally relate to 23:03. Your videos are really helping me in my turning journey, keep up the great work!
Good morning. Congratulations on your new lathe. I’m really happy for you. And in answer to your question about rearranging the shop and things happen, yes. It’s happened to me too. I have a Laguna midi lathe. I was very excited when it was delivered. I can relate to how happy you are. Your shop looks great. I hope you have a great day today. I’m heading to the local sawmill later this morning. I need some new wood to turn. Thinking about getting some African mahogany. Not sure yet. Enjoy your new lathe.
Looks like a great lathe. I look forward to what you think about it 6 months to a year down the road. I do t blame you for being excited about this beast. I would be too.
I'm happy for you Tomislav. Christmas has come early. So can we expect some very large bowls in the near future?. I used to have a 750w lather but got frustrated a few times when I pushed it too hard. I now have a 1500w (2hp), That has the turning capacity and power to meet my needs. I'm sure it will be the lathe that lasts my life time
Hey, that is a real beauty! Congrats and I look forward to your upcoming turnings on your new dream machine. I like the rotating headstock, seems it would be handy sometimes. Stay safe T.
Congratulations Tomislav on your new lathe - it looks a beauty! In due course it would be great to see you demonstrate how to use the outboard turning function. I plan to do a 20inch platter one day but first of all I need to understand how best to approach such a project. Thanks for all your valuable advice. I never miss a video and have learned heaps from your you tube videos 👍
More Merry Christmas! Good on Steinart for the discount. Seems to be an excellent company. And thank you for sharing the unveiling and christening of what looks to be a workhorse of a machine. I think we all share your excitement. And I will tell you, my (1993) Vicmarc VL300 doesn't have registration marks! Of course, there's an easy workaround for this. And speaking of such, your new controller can almost certainly be adjusted for fast and slow stops. You still want slow for the big chunks to avoid them spinning off. Merry Christmas from South Carolina US. Greg
What a fantastic Christmas present-will your family see you over Christmas?? Very pleased for you, you give so much and good things come back. Greetings from Tasmania. 😁
Lovely lathe, very pleased for you. I know it will be a feature for many videos to come. I have a much smaller Nova 1624 with rotating headstock and I do use that feature with the outrigger for larger platters etc.
![รวมมิตร ภาพนี้ก็ฮาเหมือนกันนะเนี้ย #4 SS2 [ พากย์นรก MEME.EXE ] | easy boy](http://i.ytimg.com/vi/kl86m9gnLt8/mqdefault.jpg)
![[TH] 2024 PMSL SEA W2D3 | Fall | ถ้าเล่นไม่ดี ไปแก้ตัววันเสาร์](http://i.ytimg.com/vi/CTmci32hvP8/mqdefault.jpg)
Tomo, sockets are actually 230V, 220 was when we were young 😊
Congrats on new machine and continue with good work (and filming).
Thank you sir, 🤗
Its like sort of sleng to say 220v insted of 230😅
Hi 👋, Tomislav, That looks like a great machine, money well spent, I have a very old Wadkin RS8, with inverter drive, and Kontour 1500 SA ,
I wish you all the success for the future , And you soon be earning some extra pennies, or euros, or dollars, And look forward to seeing a new project being turned on it, stay safe, Phil from the moulin France .
Thank you Phil, watkin is a beauty, thank you for watching
"it ever happen to you that you're changing your shop layout a little bit and you came across stuff like this. and then you start to curse the one who made that job a lot harder than it should be, then you realise that was you actually."
sadly a story I am all too familiar with! enjoy the new lathe mate!
Thank you buddy🤗
I get almost as excited watching someone else open stuff like this as if I were
Hi Tomislav, I remember unboxing my Axminster 406 I was like a kid in a sweet factory, it’s lovely when it’s all put together and you finally can start to turn, happy turning mate.
Thank you mate, its special feeling ecpecially when its something quallity like axminster or killinger 😀
congratulations !
I bought my dreamlathe 1991 also from Steiner. It has some features in common with your lathe. 2 horsepowers, distance between centers, hight over bed. But no electronical device, just 3 mechanical speeds and a two-speed 3 phase motor. Last summer I had to chance the bearings for the first time. And I did get very good advice from Steiner as how to change the bearings, step by step. With Steiner you are truely in the best hands.
Indeed, 33 years thats awsome.... STEINERT brothers are great
🕶good for you Tomislav. Looks like a fine machine.
Thank you Steven,it really is🤗
I ordered my "dream lathe" last month. I'm sure I'll be as excited to get it into my shop as you are! Best wishes to you and your new lathe!
You sure will be, what is it?
Tomislav Čestitke ob nakupu stružnice. Upam da ti bo zeloooo.... dolgo služila!
Hvala puno susjed 🤗
Очень рад за тебя, Томислав! Прекрасное приобретение! Мечты всегда должны сбываться! Удачи.
Thank you
Well done my friend looking very nice 👍
Thank you Kevin
Good for you! New lathe day is a good day.
Indeed, thank you
As happy as a grown man in his workshop with his precision machined wood turning lathe. Congratulations! Also instructive on how to set a lathe up.
Thanks, indeed like kid on Christmas morning ☺️
Happy for ya Tomislav!!!!!
Thank you sir
Good evening Tomislav from Tennessee USA. I "stumbled" onto your channel a few hours ago and have enjoyed several of your videos and liked each and everyone of them. I feel your joy with the new lathe...I'm on my 3rd now which is a gently used Jet 1642. Hope you had a very Merry Christmas and I will see you in the next video.
Thank you very much for watching my videos and support what I do....1642 was on shortlist but was little expensive to buy here in Europe, but I love that lathe
...
Hopefully I'll visit United States one day...
Merry Christmas to you and your family
Hi Tomislav, congratulations on getting your dream machine! We can see the excitement in your actions and hear it in your voice, very happy for you and looking forward to what you will create👍 I started turning when I retired 2 ½ years ago on an old 1954 Canadian 10” Beaver great little lathe. I saw a deal that I couldn’t pass up on an 1980 18” Canadian General sitting in a barn, I brought it home and cleaned it up, put new bearings in it and converted it to VFD my dream was fulfilled. Still learning and it is the most rewarding hobby for me. Take care, Wayne
Awsome Wayne, that sounds like great find, I've seen on several videos general lathes,they look like extremely well build machines.... Thank you very much for watching and support
Happy days and congratulations. Thanks for introducing a manufacturer of which l have not heard and what looks like a fantastic lathe. If l had a wish list it would have to go on it. Have fun and look forward to many more great videos using it
Thank you very much sir 😀
A great Christmas present Tomislav.
Indeed, thank you for watching
Congratulations on your new lathe Thomaslav. Hope you have many enjoyable years turning on it.
Thank you, so far excellent machine
Congratulations...I am excited for you....big cuts and stops on a dime.
Thank you, I'm excited about it
Your excitement shows. Its good to be excited about things.@@tomislavtomasicwoodturning
Congratulations, you deserve it! Such a humble man with an incredible skill set. I bought my dream lathe, a robust American Beauty recently, now I have to develop the skill set.
Uuuu american beauty is such a lovely machine, thank you for kind words
I can see why you are so excited. Enjoy the lathe
Thank you, even after few days still are
I'm so chuffed for you. Such a machine is beyond my means, my turning being occasional, in conjunction with furniture making and restoration. someday maybe..someday.Thanks for posting.
Thank you sir☺️
Enhorabuena!!! una fantástica adquisición. Solo al alcance de los profesionales o de los que les sobre el dinero😂😂. No quiero decir que el torno anterior sea malo, ni muchísimo menos, pero un killinger es otro nivel....
Deseando verlo funcionar y verte trabajar en él y con él. Perdón si la traducción no es buena, es de google.
Congratulations!!! a fantastic acquisition. Only available to professionals or those who have extra money😂😂. I don't want to say that the previous lathe is bad, far from it, but a killinger is another level....
Looking forward to seeing it work and watching you work on it and with it.
Thank you very much 🤗
I have got my dream Lathe Axminster Trade WL 406 and i was so exited when i set it up. I totally understand your excitement and your you. Enjoy
Thank you, that axminster is a beauty as well
Congrats on getting your new lathe. I'm on my way to pickup my dream lathe a Vicmarc vl300 3 hp that my good friend gave me.
Thank you, and congrats to you as well, vicmark is awsome brand
That’s really great news Tomislav. I hope it gives you years of enjoyment and prosperity.
Thank you,I hope so too🤗
Congrats, that is an awesome lathe. And you are always a humble man.
Thanks a lot, for what you are showing here on this channel. Pozdravljam iz Češke i sretan Božič.
Pozdrav Českoj i hvala Vam puno na lijepim riječima i svako dobro za blagdane 😉
Congratulations on new machine day!
Thank you
Congratulations Tomislav! That looks like a real dandy lathe. No need to say "enjoy" because it's very obvious that you will!
Take care, Dave
Thank you Dave, already put it through its paces😅
Very nice! I know how you feel I got a new lathe this year also. I picked up a Recond Power and like it very much. Wish you the best of luck and joy with your new lathe!! Thank you for sharing.
Thank you very much and as well all the best on new lathe
Je suis très heureux pour vous Tomislav : Une passion, un rêve, un beau jouet aussi, un très bel outil de travail !
J'ai ressenti cela aussi quand j'ai upgradé et équipé mon tour avec les derniers perfectionnements que permettent la technologie : c'est une sensation vraiment confortable, agréable et inoubliable. Régalez-vous, régalez-nous, travaillez bien (pas trop tout de même) ! ☺ Patrick
Thank you very much, indeed that feeling of quallity is something else...
New toys is always the best days ❤
Indeed😀
Congratulations on the new lathe!
Thank you sir
Congratulations!
Thank you
Congrats dear Tomislav, happy to see you keep Rwceiving new tools to work wonders with! Enjoy and keep the good stuff coming! Cheers!
Thank you Boris, glad to see you back at the lathe😀
Well, never heard of this lathe, and never had a chance to play on one. One thing I like is the 3 speed ranges, rather than 2. The mid speed range goes high enough for smaller bowls, and slow enough to core with. With a 2 speed lathe, they tend to not like coring in the high speed range. I do prefer slower minimum speed, like 10 to 15 rpm. The reason for that is that I like once turned bowls from sloppy wet wood. I let them dry and warp, then sand them out. I need that very slow speed so I can power sand with the lathe spinning. Most of the lathes over here turn off at 50 to 100 rpm. I asked one tech about it and he told me that if I ran my lathe that slow I would fry the electronics and ruin my lathe. I told him that I had sanded out thousands of bowls at that speed and never had any problems. He again repeated his first statement. I did get an American Beauty from Robust, and got the same concerns from the owner. He walked me through the steps to get the speed down so I could sand my warped bowls. He cautioned me about the heat issue. I found out my lathe ran cooler when I was sanding than it did when I was turning. I do make my lathe work when I turn bowls. I am a big fan of the pivoting headstock with my Vicmark 240, and the sliding headstock on my AB. It allows me to slide the headstock down or pivot it so I can stand up straight to turn. People that turn on long bed lathes use some what different mechanics than those who turn on short bed lathes. It just works better for me.
One concern I have with the sliding headstocks is the pressure plate on the bottom of the headstock. My first sliding headstock lathe was a PM 3520A and it had a cast iron pressure plate which broke when coring some black locust. They replaced that with a steel plate that was about 4 by 6 inches, which is sufficient. My American Beauty has a plate that is the same size as the base of the headstock. Probably more than it needs. I saw one lathe, 24 inch diameter capacity that had the same plate on the headstock as there was on the banjo and tailstock. Not good. Hope you have a big plate on yours. Have fun with your new lathe!
Hi, thank you for watching 🤗 , I honestly haven't checked, will do now, I think its bigger then banjo😅
American beauty is a beast and lovely lathe
Well done Tomislav and well deserved it's a great feeling to finally get your dream machine.
Thank you very much
Hello Tomislav....great video. I followed along with shared excitement for your new lathe. But watching your skill on turning that bowl was equally excellent. I turn bowls on my old Rockwell/Beaver lathe( that I converted to variable speed),but what you do in minutes takes me much longer. Thanks-- looking forward to seeing new videos with your new lathe.
Thank you very much, Already several videos and over 30 bowls and other turnings done on it 🫣
Emergency stop switch. I would only use it for Shutdown after finishing your day and of course any Emergency situation. It should stop the power from going to any part or the lathe. Very nice machine, Tomislav.
Did it come with a banjo extension for if you ever want to do oversized turning in the outboard position?
Thank you, nope,that outriger is extra, maybe I'll buy it one day 🤗
That's one downside of working by yourself; no one else to blame. I thought it was just me. Enjoy your videos. New sub.
Thank you, indeed no one to blame around 😂
Appriciate your support
Hello, congratulations. That lathe is beautiful. It seems to be very robust. I am very impressed. I live in Connecticut, USA. I make jewelry boxes, and keepsake boxes. I am saving for a new bandsaw. I am exited for you. New tools are a treat these days. Thanks for the videos.
Your friend, Earl
Thank you Earl, much appriciate kind words 🤗 hoping soon you'll get bandsaw and enjoy your new machine....
Congratulations Tomislov ….. I could not be more excited for you! You deserve this fine machine and can’t wait to see all the fine projects you will share with us. Thank you for sharing the unpacking of your dream 🙏🏼🤠🇨🇱
Thank you very much for kind words and support 🤗
Congratulation on the new lathe.
Thank you 😀
Congratulations on getting your dream lathe! I have a robust sweet 16 and your lathe has all of the featues as mine. Both are high quality machines and will easily be functioning perfectly when your grandchildren take over your business many years from now! Oh, and always, I enjoy watching a production turner working at his trade! No wasted motion and light touches with strong hands!
Thank you Richard, Ohh I have looked at Sweet 16, such a great lathe...
Thank you very much and all the to you
Congratulations! Nice gear. 👍👍
Thank you 👍
Thanks for all your great videos! Here’s a little start for your bed extension fund, or maybe just for some holiday fun
Sir, thank you very much, not sure what to say other then thank you.... Have a great holidays
Tomislav,
You are a blessed guy. What a beautiful lathe and this is a great video of it. I had a Stratos CO 230 lathe that I recently sold due to health problems. Really regret it now since I am much better.
This one seems like a step up from the Stratos and like you said, a dream lathe.
I am in the USA and I will be investigating availability here. I hope they have service here if they sell in the US. Although I did not have any problems with the Stratos, service became unavailable.
Thanks for a great review.
Sorry to hear about your health, hope its all ok now?
I think Steinert company send worldwide so send them email, say you saw it in my videos and they can probably sort something out.... Not sure about service however Steinert has great customer service so if ever something happens you should be covered.... But check with them ofcourse about all the details
Congratulations on your new lathe. It has some nice features, and excellent quality and craftsmanship. If I could, I would definitely buy one. Looking forward to seeing your new videos with this lathe. Like always I enjoy and learn a lot from your videos. Thank you.
Thank you sir, glad you liked my videos and thank you for support
I started turning at Xmas my Mrs bought me a bench top midi lathe,adjustable speed which got me hooked .I have already thinking of upgrading as the1/2 horse power motor struggles cutting bowls which I have fallen in love with.
That is normal as we all start that way, lathes hold up value very good so you should be able to sell the small one and upgrade to bigger one....
Probably one of the best European made lathes on the market. Well chosen and looking forward to seeing more of your brilliant work.
Thank you very much, indeed one of the best
Congrats Tomislav! I had the same dream and it came true one year ago. I'm very happy with 1450 SE 😎🤩
Awsome🤗 hope you are enjoying it😀
Tomislav, Best wishes and best of luck with your beautiful lathe.
Thank you for great wishes
Congratulations!
I'm very happy for you. It's always nice to see a happy person. 😀
Thank you, 😀
Congrats on your new lathe Tomislav! I know the exciting feeling you are having, as I had also when I got my new lathe. Enjoy! 👍
Thank you sir, thank you for watching
Congratulations Tomislav! You deserve it!! Really looking forward to all the projects you use it for.
Thank you very much, should be interesting year
Graduation on your new Lathe. Looking forward to seeing what comes off of it.
Me to, thank you very much
Congratulations Tomislav!!! That is a beautiful piece of equipment. I'm still waiting on my dream lathe.
Thank you, I hope you'll get it soon...
Congrats on new lathe 👍🏻 I contacted Steinert about a year ago for a new lathe myself. But when I was quoted a higher price than listed, and also they wanted pre payment with almost a year lead for delivery, it scared me away. Now happy camper with a new Vicmarc. I enjoy your videos. Keep it up 🎉
Not sure what happend, can't speak in there name, however vicmark is one of my other dream lathes and such a good machine as well.... Thank you for watching
Nice one Tomislav, that is a great lathe,... enjoy it all the way and bring out new good work,... all the best from Portugal, hugs for the all famaly,...
Thank you Paolo,all the best to you as well
Congrats on the new lathe. I too received a new lathe (on my birthday, a gift to myself). A new learning curve for me. I hope it serves you well.
Congrats as well🤗, thank you very much
You really do make it look so easy - a true profesional! Thanks for sharing and good luck with your great new lathe.
Thank you sir
I'm often on the Steinert site drooling over their stuff 😂
She's a beaut Tomi, I'm happy for you 😁 Well wear lad
Thank you very much, I have been drooling from time I start 😅
Great piece of kit, tomislav happy and safe turning 😊
Thank you Will, stay safe
7 minutes from mounting it on the screw chuck to roughed out. I want to cry!
😅😅😅 its almost finish bowl,just need a bit of sanding😉
Brilliant! Health to enjoy your new lathe, it's a beauty!
Best Wishes, Brendan.
Thank you Brendan
All the best to you as well
Congratulations on getting your dream machine!
Thank you 😀
Congrats bud! You are flying! What an awesome machine! You are going to love working on that. I bet you went back tp your workshop at least once to confirm it is really there. This day was a Good day. 👌💪
😂😂you are right, I've made excuces just to go to shop to admire it 😅 thank you very much
Very happy for you Tomislav. You deserved it.
Thank you Alain ☺️
What an amazing lathe, hope to see many projects in the future. Most of us can personally relate to 23:03. Your videos are really helping me in my turning journey, keep up the great work!
Glad to hear that, thank you very much
Good morning. Congratulations on your new lathe. I’m really happy for you. And in answer to your question about rearranging the shop and things happen, yes. It’s happened to me too. I have a Laguna midi lathe. I was very excited when it was delivered. I can relate to how happy you are. Your shop looks great. I hope you have a great day today. I’m heading to the local sawmill later this morning. I need some new wood to turn. Thinking about getting some African mahogany. Not sure yet. Enjoy your new lathe.
Thank you very much,and good luck in hunting wood... Enjoy your laguna,they are excellent machines
Looks like a great lathe. I look forward to what you think about it 6 months to a year down the road. I do t blame you for being excited about this beast. I would be too.
Thank you very much, ohh review will be in future for sure....
I'm happy for you Tomislav. Christmas has come early. So can we expect some very large bowls in the near future?. I used to have a 750w lather but got frustrated a few times when I pushed it too hard. I now have a 1500w (2hp), That has the turning capacity and power to meet my needs. I'm sure it will be the lathe that lasts my life time
Thank you very much, indeed some big stuff in future....🤗
Congratulations Tommy
She’s sweet 👍
Thanks 🤗
So happy for you Tomislav; this looks like it is going to work very well for your needs and looking forward to seeing future videos as you use it.
Thank you, next day it was in full mode , turning around 20 bowls for drying🤗
Twenty! Wow!
@@richardmccann4815 that was in couple of hours, usually its more in a day😅
Hey, that is a real beauty! Congrats and I look forward to your upcoming turnings on your new dream machine. I like the rotating headstock, seems it would be handy sometimes. Stay safe T.
Thank you T, for watching and support
Congratulations Tomislav on your new lathe - it looks a beauty! In due course it would be great to see you demonstrate how to use the outboard turning function. I plan to do a 20inch platter one day but first of all I need to understand how best to approach such a project. Thanks for all your valuable advice. I never miss a video and have learned heaps from your you tube videos 👍
That would be a plan, but first I need to recover from this then I'll buy outriger , thank you very much for watching
Very nice lathe and nice videography. Would love to see this lathe on some spindle turning instructions!
There is a new 4ways video and skew video tutorial as well☺️
Wow! That beautiful machine exudes high quality. I'm so happy for you.
Thank you, it really does ☺️
So pleased for you. It looks like a great lathe. Congratulations.
Thank you Rachel 😀
Very happy for you.
Thank you very much
@@tomislavtomasicwoodturning we are enjoying the "pots" we purchased and I am in the middle of working some large Walnut pieces.
Tomislav, sure looks like a sweet lathe. Lifetime bearings that sells me. Less maintenance the more turning time
Indeed, thank you very much
Quality Lathe, well made and rugged.
Congrats and enjoy!
Thank you
Good on ya! I'm still using the old shopsmith until I get better. Your videos will help me to do so.
Glad to hear that my videos are helpfull ☺️ thank you for watching
Really happy for you! I got a new one earlier this year. I really have enjoyed it so far.
So glad to hear that,what is it?
More Merry Christmas!
Good on Steinart for the discount. Seems to be an excellent company. And thank you for sharing the unveiling and christening of what looks to be a workhorse of a machine. I think we all share your excitement. And I will tell you, my (1993) Vicmarc VL300 doesn't have registration marks! Of course, there's an easy workaround for this. And speaking of such, your new controller can almost certainly be adjusted for fast and slow stops. You still want slow for the big chunks to avoid them spinning off.
Merry Christmas from South Carolina US.
Greg
Thank you Greg very much, vl300 is such a great lathe....
Томислав поздравляю 😊 Искренне желаю вас счастья
What a fantastic Christmas present-will your family see you over Christmas?? Very pleased for you, you give so much and good things come back. Greetings from Tasmania. 😁
Thank you sir, I'll try to be in house for holidays 😂, family always first
Lovely lathe, very pleased for you. I know it will be a feature for many videos to come. I have a much smaller Nova 1624 with rotating headstock and I do use that feature with the outrigger for larger platters etc.
Thank you very much for watching, Nova makes some good lathes
Very nice lathe going to be fun
Already was, 15 rough out bowl done with ease🤗
Congrats Tom! A great looking machine! 😎
Thank you 👍
That is a really nice lathe .
Thank you
Congratulations on your new lathe 🎉
Thank you ☺️
That is a very nice looking machine.
Thanks 🤗
congratulations
Thanks 🤗
Congrats on the lathe. It is well deserved.
Thank you very much
Very nice lathe! You amaze me though. You do in 2.5 minutes what takes me 1/2 an hour to do.
Thank you sir, its just practice and repetetive work
Amazing lathe. So robust and shows the quality of a German made machine.
Thank you, so far I'm really happy with it
really happy for you,i want to change my nova dvr xp 16/24 for the laguna 24/36 but santa is cheap here i guess..merry christmas to you my friend!
Thank you, I hope santa will open up wallet soon😀
Merry Christmas to you and your family as well