There’s a better way to separate these tracks. You have to add ezdrummer as a 16 channel instead of stereo. Look it up. It will save you a ton of time. Great video. Thanks for sharing!
I would like to point out that with EZdrummer 3 you can change the velocity curve per pad within EZdrummer an create a midi drum preset so you dont have to change the module pad sensitivities. You can also change the midi note mappings.
Good comment. Both work I believe. I prefer to set sensitivity settings already in the module, so it is closest to my playing style, also if I’m just playing along without recording. About the mapping: I agree, that can be convenient. Thanks!
Hey brother great video!!!! I am in the process of getting a Roland TD27KV for the second time. I just know I can get more out of the drums with Ezdrummer 3 When I had them last I used a focusrite I interface with a windows based Laptop. I still had a lot of latency. I'm wondering if it because I didn't turn local control off? Also I have thought about getting a Mac instead. What specfic apple computer do you use? Thanks!
Thanks Matt! My Mac is about 7 years old, but no latency issues here :). I connect the TD27 directly in my computer with the usb-c cable. Works very well. Yes I believe it is best to turn local control off. When I am recording myself, I don’t mind listening to the sounds of my module (with next to no latency). The recorded sounds are coming from EZD, so after recording you will hear those sounds (which is the goal ;). But also check your sample rate in EZD3, that should be quite low, during recording at least. Sample rate is only relevant during recording. When you listen back and start mixing, you can increase the sample rate again for a better sound quality. Hope that helps a bit! Good luck
bonjour Sir, regarding your hiHat settings tip, do you mean that AFTER the hiHat is calibrated correctly with the 2 solid left & right arrows, then again AFTER inserting a foam/felt piece, you should AGAIN calibrate the hiHat, again with 2 solid left & right arrows? THANKS for video(s)!!
Nice explanation. Question: Is it possible to transfer my recorded and mixed groove from ezdrummer 3 to my Garageband project? Either copying over the notes or as a file. Thanks
Thanks Hugo! So you recorded the groove in the standalone version of EZD? Not quite sure if that works. There should be a way I suppose. I do know that in GB you can drag and drop beats from the EZD-plugin onto a midi track (in the DAW). Hope that helps
@@theundercoverscene7247 Well I recorded my beats in the songtrack and mixed them in Ezdrummer since you dont have to deal with the piano-keys layout and you get some nice EQ options. I will try to drag my recorded songtrack beat onto my miditrack in GB when I get the chance. Thanks again for the tutorial.
Are you curious to see how I used EZdrummer 3 in recent drum covers? Which presets I chose, adjustments and mixing settings I made? Watch these videos: ▶ Milk It - Nirvana (Drum Cover & Mixing in EZdrummer 3) 👉 th-cam.com/video/HPPGRSIZpw0/w-d-xo.html ▶ Hash Pipe - Weezer (Drum Cover & Mixing in EZdrummer 3) 👉 th-cam.com/video/PBc1Wp0hHag/w-d-xo.html
In GB you can create a midi track and then you activate the plugin EZD3 (on that track). There must be several tutorials that show it in detail. Probably also by Toontrack.
Thanks for the great video. When you record the audio only, how are you connecting your drums to your computer? I'm guessing this is with the 1/4" master output?
Hi Dave. You can do that via the usb cable from the module to your laptop/pc, (or via an audio interface in between, although that’s not necessary). You could do it also with the 1/4” master out, but then you will only record the master track (stereo) and not all individual tracks.
Are you just using EZD to eq and assign the sounds, and then back to Garageband to mix and export? I guess I missed how the two interact back and forth.
I mix mostly in EZD. This is a midi track in GarageBand. But you can still add further EQ or compression etc on that one midi track in GarageBand (so some additional mixing on the overall drum mix, if that makes sense :).
Thanks! Do you mean your single midi track? You can export that in GarageBand: Export mix I believe it’s called. So you activate the EZD plugin on the midi track, then you solo that track and click on export. You’ll get a audio/wave file of only the drums. Hope that helps!
Great video! question please. is it possible to do this exercise in order to just play drums through a PA and not record? meaning i just want to have more control over ez drummer 3 and adjust volumes of articulations individually(ex: hi hat bow level tool ow i want to bring it up ,bell on ride and cross stick on snare) or is this only to record drums? Thank you!
Thanks! Yes you can also just play without recording. EZD3 comes as a stand-alone program or you use it as a plug-in in your DAW. And then you’d need to connect your pc to a PA (I’m not an expert on how to do that part…). Important is to make sure the level of latency is acceptable so that your playing remains natural without delay. And you’d need to spend some more time to dial in the volume settings upfront. When recording you can change a lot afterwards, so your initial settings are less strict. Hope that helps!
so for instance my floortom 1 is playing the ride sounds and not the floortom 1 sounds at all. I have to change it on the module itself to get the right sound?
@@theundercoverscene7247 Wow, Coen, I truly appreciate you responding so quickly. I imagine you're a busy guy. Thanks for taking the time to answer my question. Cheers.
@@badjabadjawebaadjaSounds cool :)! Good workaround, but I expect it must be possible to trigger the hihat in EZD and get midi output. After a (future) software update maybe? Good luck!
Good question. Well, when I play a cover I don’t set a bpm, because it can be hard to find the right one. And sometimes the bpm changes over the song. That means I can’t quantize (sometimes I drag single notes slightly manually, if it becomes really annoying 😉, but never too much, otherwise you see it on video… and also because it is rather boring work). If I create music of my own, I do use a metronome and set the bpm in my DAW. But I don’t like to quantize so much. I would only do it on certain parts, or even some notes only. I prefer a more human feel in a song, so with some imperfections. I guess it also depends which genre you play. Hope that helps!
![เปิดบ้าน พี่ตูน Bodyslam หลังใหม่คนแรก ที่ภูเก็ต l [Nickynachat]](http://i.ytimg.com/vi/flFwcmyDQSk/mqdefault.jpg)
When literally every drummer googles or youtube searches 'How to record e-drums' this video should pop up! Amazing! Thank you
Thanks man! 🙏🏻
This really helped me a lot! Thank you! I've been screwing with this VH10 hi hat for two days..lol
I’ve seen many edrum recording videos and this was by far one of the best and most helpful. Thank you!!
Glad it was helpful, thanks!
There’s a better way to separate these tracks. You have to add ezdrummer as a 16 channel instead of stereo. Look it up. It will save you a ton of time. Great video. Thanks for sharing!
Thanks for the tip! 🙏🏻
I would like to point out that with EZdrummer 3 you can change the velocity curve per pad within EZdrummer an create a midi drum preset so you dont have to change the module pad sensitivities. You can also change the midi note mappings.
Good comment. Both work I believe. I prefer to set sensitivity settings already in the module, so it is closest to my playing style, also if I’m just playing along without recording. About the mapping: I agree, that can be convenient. Thanks!
Good video. You made this much more intuitive. Thank you.
This is really helpful, thank you!
best video of its type-- thanks!!
Yeah, I’m having problems with my VH10 on EZ drummer 3. I’ll check and see if the settings that you recommend or what I have.
Hope my tip also works for the VH10. I haven’t tried that (never owned one). Let us know if you find something that works better, thanks!
Thanks a lot for this, it helps a lot!
Hey brother great video!!!! I am in the process of getting a Roland TD27KV for the second time. I just know I can get more out of the drums with Ezdrummer 3
When I had them last I used a focusrite I interface with a windows based Laptop. I still had a lot of latency. I'm wondering if it because I didn't turn local control off? Also I have thought about getting a Mac instead. What specfic apple computer do you use?
Thanks!
Thanks Matt! My Mac is about 7 years old, but no latency issues here :). I connect the TD27 directly in my computer with the usb-c cable. Works very well. Yes I believe it is best to turn local control off. When I am recording myself, I don’t mind listening to the sounds of my module (with next to no latency). The recorded sounds are coming from EZD, so after recording you will hear those sounds (which is the goal ;). But also check your sample rate in EZD3, that should be quite low, during recording at least. Sample rate is only relevant during recording. When you listen back and start mixing, you can increase the sample rate again for a better sound quality. Hope that helps a bit! Good luck
@theundercoverscene7247 Thanks again brother! Happy drumming 😁
Handige video Coen!
bonjour Sir, regarding your hiHat settings tip, do you mean that AFTER the hiHat is calibrated correctly with the 2 solid left & right arrows, then again AFTER inserting a foam/felt piece, you should AGAIN calibrate the hiHat, again with 2 solid left & right arrows? THANKS for video(s)!!
Bonjour! Yes that is correct. Good luck
Nice explanation. Question: Is it possible to transfer my recorded and mixed groove from ezdrummer 3 to my Garageband project? Either copying over the notes or as a file. Thanks
Thanks Hugo! So you recorded the groove in the standalone version of EZD? Not quite sure if that works. There should be a way I suppose. I do know that in GB you can drag and drop beats from the EZD-plugin onto a midi track (in the DAW). Hope that helps
@@theundercoverscene7247 Well I recorded my beats in the songtrack and mixed them in Ezdrummer since you dont have to deal with the piano-keys layout and you get some nice EQ options. I will try to drag my recorded songtrack beat onto my miditrack in GB when I get the chance. Thanks again for the tutorial.
Are you curious to see how I used EZdrummer 3 in recent drum covers? Which presets I chose, adjustments and mixing settings I made? Watch these videos:
▶ Milk It - Nirvana (Drum Cover & Mixing in EZdrummer 3) 👉 th-cam.com/video/HPPGRSIZpw0/w-d-xo.html
▶ Hash Pipe - Weezer (Drum Cover & Mixing in EZdrummer 3) 👉 th-cam.com/video/PBc1Wp0hHag/w-d-xo.html
how do you get EZD3 in garage band ? that would be helpful , seems important to get started , thanks
In GB you can create a midi track and then you activate the plugin EZD3 (on that track). There must be several tutorials that show it in detail. Probably also by Toontrack.
Do you monitor the EZ Drummer sounds while recording into your DAW through the DAW & Audio interface and not the TD-27 itself?
I prefer to monitor the sounds directly from the TD-27. In theory it should have less latency that way. But both options work.
Thanks for the great video. When you record the audio only, how are you connecting your drums to your computer? I'm guessing this is with the 1/4" master output?
Hi Dave. You can do that via the usb cable from the module to your laptop/pc, (or via an audio interface in between, although that’s not necessary). You could do it also with the 1/4” master out, but then you will only record the master track (stereo) and not all individual tracks.
@@theundercoverscene7247 Ah yes, that makes a lot more sense. Thanks for the reply!
Are you just using EZD to eq and assign the sounds, and then back to Garageband to mix and export? I guess I missed how the two interact back and forth.
I mix mostly in EZD. This is a midi track in GarageBand. But you can still add further EQ or compression etc on that one midi track in GarageBand (so some additional mixing on the overall drum mix, if that makes sense :).
Great video,can you tell me main room or bright room is better for direct recording without other stuffs, just only a drums in ezdrummer?
Thanks! Quality wise or setting wise it shouldn’t make a difference. It depends on your taste which room / sound you prefer. Good luck!
Excelent video! Just one question, how do you export the midi to audio wave? Thanks
Thanks! Do you mean your single midi track? You can export that in GarageBand: Export mix I believe it’s called. So you activate the EZD plugin on the midi track, then you solo that track and click on export. You’ll get a audio/wave file of only the drums. Hope that helps!
@@theundercoverscene7247 thankss
Great video! question please. is it possible to do this exercise in order to just play drums through a PA and not record? meaning i just want to have more control over ez drummer 3 and adjust volumes of articulations individually(ex: hi hat bow level tool ow i want to bring it up ,bell on ride and cross stick on snare) or is this only to record drums? Thank you!
Thanks! Yes you can also just play without recording. EZD3 comes as a stand-alone program or you use it as a plug-in in your DAW. And then you’d need to connect your pc to a PA (I’m not an expert on how to do that part…). Important is to make sure the level of latency is acceptable so that your playing remains natural without delay. And you’d need to spend some more time to dial in the volume settings upfront. When recording you can change a lot afterwards, so your initial settings are less strict. Hope that helps!
so for instance my floortom 1 is playing the ride sounds and not the floortom 1 sounds at all. I have to change it on the module itself to get the right sound?
Great video Thank You. subbed and liked.
would you say that the process is rather similar with the td-17 or would it be completely different?
Yes that is very similar. In EZD3 you should select the TD17 preset for the right input (the midi mapping). That’s the only difference. Good luck!
@@theundercoverscene7247 Wow, Coen, I truly appreciate you responding so quickly. I imagine you're a busy guy. Thanks for taking the time to answer my question. Cheers.
Do you also have any settings for the VH14-D hihats roland? …😅
Haha no sorry. How is your experience with that hihat? Is it worth the upgrade?
@@theundercoverscene7247 yess amazing, i just use it live on a single track, and trigger the rest midi. (Kick toma cymbals enz.
@@badjabadjawebaadjaSounds cool :)! Good workaround, but I expect it must be possible to trigger the hihat in EZD and get midi output. After a (future) software update maybe? Good luck!
11:29 I see your hits dont fall to the beat. You dont play to a metronome ? So you never quantize anything ?
Good question. Well, when I play a cover I don’t set a bpm, because it can be hard to find the right one. And sometimes the bpm changes over the song. That means I can’t quantize (sometimes I drag single notes slightly manually, if it becomes really annoying 😉, but never too much, otherwise you see it on video… and also because it is rather boring work). If I create music of my own, I do use a metronome and set the bpm in my DAW. But I don’t like to quantize so much. I would only do it on certain parts, or even some notes only. I prefer a more human feel in a song, so with some imperfections. I guess it also depends which genre you play. Hope that helps!
@@theundercoverscene7247 thanks. Your answer has been very informative.