Great video im fixing to install one myself and yiu did it so fast real clean i liked it. How far can you pick up a signal? I have some high range antennas almost 2ft long. Im hoping to pust it to the max. I also am getting thasame cardso i am curious to how far the signal carries?
This video has been sooooooooo useful, thanks. I have an aironet 1130ag series that for some reason doesn't allow me to configure the access point thru teh GUI and I had to do it thru CLI. Thank you very much.
Thank you so much for sharing your videos! Can you please make a video for an autonomous AP with multiple VLANs and multiple SSID? Also, you configured a trunk port on the switch, what configuration should be made on the physical gigabitEthernet port on the Cisco Aironet Wireless AP? Can you please let us know? Thank you!
hi great videos thanks for your time, i got a air-cap702i-e-k9. how do i find ip address so can make it autonomous, hope you can help please as i am losing my hair.
this is great. this type of config would be good with site visits just so we can show realtime broadcast coverage with phone apps. i will be looking for a video to then setup the AP back to lightweight mode after this type of site visit work...
THANK YOU SOOOOOOOOO MUCH!!!!! I had been reading and reading on all I could on how to get my AIR-CAP 2702i that i converted to autonomous mode to activate the AC 5Ghz. The GUI is pretty useless in this and had to learn how to do it in CLI, I had no idea about the (en) thing I had to do. Im pretty green when it comes to codes. I watched you step by step and it turned on just like how you said it would. now, the only thing is how do I get the max bands and channels out of my Access Point because right now its only giving me a link speed of about 173 Mibit/s at -17 dBm. I am trying to learn as much about doing it in CLI but no luck so far.
Alaric Bessinger my office buy aironet cap2702i. They want to use it become AP. But the problem is we didn't know how to config aironet. Please help step by step coz we didn't know how to install it. Thnx.
Jorge, buenas noches. tienes la version AUTONOMUS de IOS para este AP: Cisco IOS Software, C3700 Software (AP3G2-RCVK9W8-M), Version 15.3(3)JC. ¿Me la puedes compartir?
hi Guys, I am configuring Cisco AP 2602i and i managed to configure ip address but i am struggling to connect to it via web browser. what could be the problem? is there a command to enable web browser or which browser should i use.
Ok i have a couple of questions should be easy. Ok so the 1st time i created an AP something went wrong and when i ran sh dot11 bssid it wasn't open under guest. Of course it wouldnt work. So i started over now i have two configurations one that works and one that doesn't how do i delete the config that doesn't work?? Also how do i add a password? When im adding int dot11 ssid NAME ? Password 12345 Or int dot11 ssid NAME password 12345 ? I found the video to be great and its running now i just have a config that wasn't configured properly and i dont have a password i was so busy didnt even think about it. so i would love to know those two things and reconfigure w/ a password? Also i see my devices trying to connect . However it tries it doent connect to the internet. It looks like its hooked up correctly everything is up etc.....? Will it only connect with the console cable and putty running? How do i set this up to run without the console connection to the router to run 24/7/365 without my computer hooked up to it? Thanks.
That’s because you need to setup a DHCP server. Not something i discusses in this video but it’s simple enough to run DHCP on a switch, server or router in the topology.
![[Part 1] ทารกน้อยถูกทิ้ง👶 หญิงชราเก็บขวดขายเลี้ยงดูเขาจนโต #โลกการละคร](http://i.ytimg.com/vi/nPTDvFCExks/mqdefault.jpg)
Great video im fixing to install one myself and yiu did it so fast real clean i liked it. How far can you pick up a signal? I have some high range antennas almost 2ft long. Im hoping to pust it to the max. I also am getting thasame cardso i am curious to how far the signal carries?
Thank you very much. Can you provide any information on Cisco 3560 8 port switches? I brought some thru ebay but they are corrupted/missing/Wiped IOS.
This video has been sooooooooo useful, thanks. I have an aironet 1130ag series that for some reason doesn't allow me to configure the access point thru teh GUI and I had to do it thru CLI.
Thank you very much.
what is the difference between the WIRED and BVI interfaces with cisco documents link
From the basics, helped me a lot, thanks.
hi Jorge, 2 silly questions: the ap's default gateway (10.0.2.1) is configured on hq-sw1 & physically a cat6 connects fa1/0/47 on hq-sw1 to ge0 on ap?
Thank you so much for sharing your videos! Can you please make a video for an autonomous AP with multiple VLANs and multiple SSID? Also, you configured a trunk port on the switch, what configuration should be made on the physical gigabitEthernet port on the Cisco Aironet Wireless AP? Can you please let us know? Thank you!
hi great videos thanks for your time, i got a air-cap702i-e-k9. how do i find ip address so can make it autonomous, hope you can help please as i am losing my hair.
Please assist, I followed your tutorial, SSIDs are not broadcasting although both radios are enabled and associated with the SSID. Any advice?
this is great. this type of config would be good with site visits just so we can show realtime broadcast coverage with phone apps. i will be looking for a video to then setup the AP back to lightweight mode after this type of site visit work...
THANK YOU SOOOOOOOOO MUCH!!!!! I had been reading and reading on all I could on how to get my AIR-CAP 2702i that i converted to autonomous mode to activate the AC 5Ghz. The GUI is pretty useless in this and had to learn how to do it in CLI, I had no idea about the (en) thing I had to do. Im pretty green when it comes to codes. I watched you step by step and it turned on just like how you said it would. now, the only thing is how do I get the max bands and channels out of my Access Point because right now its only giving me a link speed of about 173 Mibit/s at -17 dBm. I am trying to learn as much about doing it in CLI but no luck so far.
Alaric Bessinger can you help me with air cap2702i please. Thnx b4
abram faith what is it that you need help with on your unit?
Alaric Bessinger my office buy aironet cap2702i. They want to use it become AP. But the problem is we didn't know how to config aironet. Please help step by step coz we didn't know how to install it. Thnx.
Jorge how i can install and set up AP 2702E with my home router
Jorge, buenas noches. tienes la version AUTONOMUS de IOS para este AP: Cisco IOS Software, C3700 Software (AP3G2-RCVK9W8-M), Version 15.3(3)JC. ¿Me la puedes compartir?
Thanks, this is exactly what I was looking for
hi Guys, I am configuring Cisco AP 2602i and i managed to configure ip address but i am struggling to connect to it via web browser. what could be the problem? is there a command to enable web browser or which browser should i use.
Hi
Can you configure your switch port as an access port only as we are only using one SSID mapped to a single VLAN, please?
Ok i have a couple of questions should be easy. Ok so the 1st time i created an AP something went wrong and when i ran sh dot11 bssid it wasn't open under guest. Of course it wouldnt work. So i started over now i have two configurations one that works and one that doesn't how do i delete the config that doesn't work?? Also how do i add a password? When im adding
int dot11 ssid NAME ? Password 12345
Or
int dot11 ssid NAME password 12345 ?
I found the video to be great and its running now i just have a config that wasn't configured properly and i dont have a password i was so busy didnt even think about it. so i would love to know those two things and reconfigure w/ a password?
Also i see my devices trying to connect . However it tries it doent connect to the internet. It looks like its hooked up correctly everything is up etc.....? Will it only connect with the console cable and putty running? How do i set this up to run without the console connection to the router to run 24/7/365 without my computer hooked up to it?
Thanks.
My 1562E won't stop scrolling when it boots! no debug all does nothing
how do I setup a password for the SSID?
Nice primer, thanks.
When I use putty or Tera Term, mine has a ancient language. How do you fix it?
sounds like you have to change the baud rate in putty & tera
I don't have DotRadio.
Very usefull !
i did the same but couldnt get the IP address from AP ?
Mudassir Shah so do i. If you already install it, i hope you can help me. Coz i really need it. Thnx
That’s because you need to setup a DHCP server. Not something i discusses in this video but it’s simple enough to run DHCP on a switch, server or router in the topology.
Shit man this dam AIR CAP just are a brick man i upload the autonomus and still the configuration is hard than terminal very usefull