Bowl Turning Large Serving - Video
ฝัง
- เผยแพร่เมื่อ 25 พ.ย. 2023
- Bowl Turning Large Serving - Video
Sometimes, we just need to turn a large serving bowl. Today is one of those days. Watch as I turn this hickory blank into a wood-turned bowl that hopefully will be around for a very long time!
▶︎▶︎▶︎TURN A WOOD BOWL UNIVERSITY◀︎◀︎◀︎
✅ Bowl Gouge Mastery
www.TurnAWoodBowl.com/mastery
✅ Tool Sharpening - For Wood Bowl Turning
www.TurnAWoodBowl.com/sharp
✅ Tree To Bowl - Understanding Green Wood
www.TurnAWoodBowl.com/green
✅ Bowl Turning - Start to Finish
www.TurnAWoodBowl.com/turn
▶︎ START TODAY! ◀︎ Online Turning Courses - turnawoodbowl.com/courses/
_____________________________________________________________
FREE WOOD BOWL TURNING TIPS EMAILED EACH WEEK
Sign Up Free Now - turnawoodbowl.com/tips
_____________________________________________________________
MY MAIN BOWL TURNING EQUIPMENT
• Full Face Shield - amzn.to/392lvuL
• Respirator - amzn.to/3p25omw
• FIlters for Respirator - amzn.to/2Mc4ogZ
• Safety Glasses w/ Readers - amzn.to/3iyGxEI
• Impact Driver - amzn.to/36hshhm
• Faceplate - amzn.to/3tcq7sp
• 5/8" Bowl Gouge (roughing) - amzn.to/2WkixLl
• 1/2" Bowl Gouge (all-purpose, finishing) - amzn.to/38UqQmp
• Live Center (with bearings on tailstock) - amzn.to/3gZxn1K
• Tailstock Extension - amzn.to/30YGIjX
• 1-1/4" x 8 TPI - Four Jaw Dovetail Chuck (w/ screw option) - amzn.to/3m6jEJd
• Slow Speed Sharpening Station Grinder - amzn.to/39ervRL
• 80 Grit CBN Wheel - amzn.to/3fADKJo
• 180 Grit CBN Wheel - amzn.to/37c9zVi
• Oneway Wolverine Sharpening System - amzn.to/33ilNKX
• Beading Tools - amzn.to/3q8CWCd
• Large Calipers - turnawoodbowl.com/caliper
• Spur Drive Center (MT2 Morse Taper) - amzn.to/3gtha4i
• Curved Tool Rest - amzn.to/3fBbNBj
• J-extended Tool Rest - amzn.to/3oqTkeZ
• Curved Tool Rest - amzn.to/3o4y5Ao
• Spindle Detail Gouge - amzn.to/33je2o0
• Sanding Angle Drill - amzn.to/3l9OcbS
• 3" Sanding Mandle - amzn.to/378DJbP
• 3" Sanding Disks - amzn.to/3q2A0VZ
• Tried and True Original Finish - amzn.to/3pN9DrN
• Wood Burning System - amzn.to/2Nk6Wd
____________________
Turn A Wood Bowl is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.
Online Turning Courses --- turnawoodbowl.com/courses/
Website --- turnawoodbowl.com/
My Publications --- turnawoodbowl.com/shop/
T-SHIRTS - merch.turnawoodbowl.com/
TH-cam --- turnawoodbowl.com/TH-cam
Instagram --- turnawoodbowl.com/Instagram
Etsy Shop --- www.etsy.com/shop/RelivedWood
Pinterest --- turnawoodbowl.com/Pinterest
Facebook --- turnawoodbowl.com/FaceBook
_____________________________________________________________
▶︎▶︎▶︎TURN A WOOD BOWL UNIVERSITY◀︎◀︎◀︎
✅ Bowl Gouge Mastery
www.TurnAWoodBowl.com/mastery
✅ Tool Sharpening - For Wood Bowl Turning
www.TurnAWoodBowl.com/sharp
✅ Tree To Bowl - Understanding Green Wood
www.TurnAWoodBowl.com/green
✅ Bowl Turning - Start to Finish
www.TurnAWoodBowl.com/turn
▶︎ START TODAY! ◀︎ Online Turning Courses - turnawoodbowl.com/courses/
_____________________________________________________________
FREE WOOD BOWL TURNING TIPS EMAILED EACH WEEK
Sign Up Free Now - turnawoodbowl.com/tips
_____________________________________________________________
#woodturning #woodworking #turnawoodbowl #bowlturning - แนวปฏิบัติและการใช้ชีวิต
Fantastic wood turning demonstration. Thanks.
Thank you very much!
Looks just like a Dublin Viking Bowl 😊.
Another great job
I really enjoy the narration
Thank you very much! Happy Turning!
That’s a real nice looking bowl, good work
Beautiful Bowl Kent. The heartwood really makes it stand out. And that rim bead adds a touch of elegance.
Keep producing these amazing tutorials. Your a great teacher.
Lowell
Thank you kindly, Lowell! Happy Turning!
That is a fine-looking bowl, Kent. I like the heartwood on the bottom. I would love to make a bowl that size, but my lathe is not large enough to make a bowl that size. That small bead on the top really adds to the shape of the bowl. I am currently working on a cauldron-shaped turning with some of my Oak - and this Oak is very hard even though it is still somewhat wet.
Sounds like a nice project. Oak can be fantastic for a bowl like that. Enjoy and Happy Turning!
Wow is right. This bowl is absolutely gorgeous. I love the grain patterns. Thanks for sharing this turning with us Kent.
Hurricane Ian? Terrible storm. However, post hurricane is the best time for blank material. Nice.
The rim bead is a very nice touch. Bravo, a great looking bowl.
Thank you, Edwin! Cheers!
What a nice popcorn 🍿 bowl. Thanks for sharing ❤️
Thank you, Tony 😋 I think the American Popcorn growers would agree, maybe not doctors. LOL That would be like…50 cups of popcorn??!!!
That really turn out beautiful love the bead great turning!
Love working on big bowls. 18 inch Chestnut is my widest to date. I do have some big blanks in the drying room just waiting for the right time to start them.
I have learned so much watching you turn, and my sharpening skills have improved so much after purchasing your how to course. Best money I have spent on lathe skills. Thank you
Very informative!!! Thank you
Beautiful bowl, in shape and grain. I think it is the biggest bowl I have seen you turn.
Thank you very much, Pete! Happy Turning!
Enjoyed the video. Thanks for sharing
Thanks for a great video. The lessons and “watch-outs”along the way are very helpful
Thanks again Kent
My pleasure, Elmer. Happy Turning!
Beautiful..i know that you have lots of blanks but its still hard to see all that wood end up on the ground. I core thick and let them dry. Thanks for all the tips
Beautiful!
Beautiful and functiinal creation!! Very informative and well done.
Great video Kent, good work! I need to turn something BIG after watching this.
Hey Ron! Sounds good. Make a big mess! Cleaning the floor with a stall shovel is always rewarding. Happy Turning!
That is a stunning bowl. Well worth the effort.
I looked at the time on the video and couldn't believe it was that long, an interesting project and great result, I never got the chance to turn anything that big no Hickory around these parts either. lol
Beautiful bowl Kent.
Thanks Jack! 👍
This one tought me a lot,well Done🤠👍
❤ Absolutely beautiful 😍
Fantastic work 😃😃
Thank you! Cheers!
Nicely done Kent. Todd in NH.
Thank you, Todd! Happy Turning!
Kent, I just upgraded my lathe to be able to handle 12 blanks and would like to find wood like you are using. Do you ever sell blanks to other turners? Your teaching and lots of practice has helped me be a better turner thank you
Beautiful work Kent! To bad you didn't core that out. In my opinion I believe the core would've been more beautiful. Take care and GOD BLESS 🙏🏻!
Thanks Stephen 👍
One of my favorite woods for a durable and beautiful bowl. Did I catch a glimpse of you wearing a powered air filtration face mask system. I am interested in getting one and am very interested in your opinion of them.
Yes you did Charles. More to come on that in a future video. Happy Turning!
I can’t help but think that the bead on the rim will give folks in the years to come a little extra grip when they put a lot into that bowl!
Beautiful bowl. After watching this video You inspired me to get a bowl blank mounted on my lathe today and ready to turn. Wondering what type, brand, of face mask you use while turning? Would appreciate giving me some advice. Thanks
looks nice
Thank you, Danny! Happy Turning!
Fantastic work as always and that’s one really big bowl. I’m still a new turner but this upcoming week I’ll be turning my biggest bowl yet. 11 and 1/2 inches. Thank you for sharing your experience with us. Have a fantastic holiday season.
Enjoy the whole process Keith. All the best to you and Happy Turning!
Hi Kent. Would you consider giving us a level side view of the placement of your tools while turning. We can see the rotation of the gouge fairly well, but your camera is facing down on the tool rest, which makes it hard to see how deep (or at what angle) you're holding the tool handle. I'm fairly tall, which I think keeps me from holding the gouge at a steep enough angle for a proper sheer scrape. I enjoyed this bowl very much.
I'll see what I can do Keith. Thank you, and Happy Turning!
Couple of questions, Kent. When putting in the screws do you pre-drill? I have used hardened screws and drilled them straight in and occasionally a screw will snap either on entry or when removing and that is a real pain to deal with. This happens especially in burled or hard dry wood. Any suggestions? Maybe this can be a whole video.
Good question, Jeff. No pre-drilling with the impact driver. That's why I love it so much. Also because the wood is so wide, there's not a real risk of it splitting. Use a stainless steel Robertson wood screw and it shouldn't break. Happy Turning!
@@TurnAWoodBowl I have a followup question on that: do you reuse the screws on multiple turnings? I always use good quality wood screws but have had several screw heads break off when installing a face plate. If you reuse, do you have a rule of thumb for when it's time to retire a set of screws?
My midi lathe doesn’t have a wheel on the headstock,but then I only have 10’ clearance
Would a steady rest help in a form like this one?
Great as usual Dear Kent.
I have a question about your mask!
What is your advice to choose a mask?
Thanks a lot
Beautiful bowl kent...how thick was the blank when you started?
▶︎ Turn A Wood Bowl University ◀︎ START TODAY! Online Turning Courses - turnawoodbowl.com/shop/
Do you make the linseed oil / beeswax finish yourself? I assume you are using boiled linseed oil.
Is your 5/8” gouge a 5/8” bar with a 1/2” flute or do you mean the flute is 5/8”?
Buster, yes. In the US we use the shaft size and the flute is usually about 1/8" smaller. Happy Turning!
As you move into the bowl is there any advantage in continuing to use the tailstock to support the bowl particularly if using a smaller chuck (3”)?
At first yes, but the tailstock will be in the way once you get down inside the bowl. Happy Turning!
How thick was this original blank and what was the final dimensions?
Kent, Why didn't this bowl need to air dry before finishing? Will this lead to cracking?
Bill, we don't need to dry wood to turn. This is about half way between wet and equalized. We cover this greatly in the Tree to Bowl Online Course check it out www.TurnAWoodBowl.com/green Happy Turning!
Can you burnish w wood shavings?
Eric, yes you can. Happy Turning!
Another great bowl and instruction. Are you seeing much distortion after final turning ?
Beautiful bowl, Kent!! Keep on turning!