2025 XMR 850 Snorkel Smoke Testing and Vent Lines! Is it water tight from the factory?

แชร์
ฝัง
  • เผยแพร่เมื่อ 25 ธ.ค. 2024

ความคิดเห็น •

  • @Mararb8
    @Mararb8 20 ชั่วโมงที่ผ่านมา +1

    You need to seal the outlet of the cvt and let the pressure gauge reach 1. Cause when you go undated water with that thing it’s gonna build pressure agains those seals. Or don’t lol. Good video

    • @MudPuppyOffroad
      @MudPuppyOffroad  19 ชั่วโมงที่ผ่านมา +1

      I had a rag stuffed in the outlet previously but it was already removed by the time I started filming. I agree with you to an extent on the belt exhaust. But Can-Am has two Large holes in the top of the loop to relieve that pressure. That's kind of the problem with smoke testing is that it inherently has to pressurize the volume with smoke. Under normal operation, the intake tracks are going to be experiencing a vacuum and once you're under water there's even a greater pressure differential.

    • @Mararb8
      @Mararb8 19 ชั่วโมงที่ผ่านมา +1

      @@MudPuppyOffroad I say this because I had a leak on my 850 snorkels and if didn’t plug the outlet and just let the air out the leak wouldn’t show. As soon that I plugged the outlet and it built 1 pound of pressure it started to show. And yeah bro I know the pressure underwater is on the outside of the snorkel 🤣 but there ain’t no way to test that with the smoke machine

    • @MudPuppyOffroad
      @MudPuppyOffroad  19 ชั่วโมงที่ผ่านมา +3

      only real test is to dunk it lol

    • @Mararb8
      @Mararb8 19 ชั่วโมงที่ผ่านมา +2

      @@MudPuppyOffroad that’s the truth

  • @markbekkers8364
    @markbekkers8364 16 ชั่วโมงที่ผ่านมา

    Cool shit