I can definitely see this guy going far as a creator, if he keeps this up he might be able to create something that can really affect he nerfing community.
This channel is on fire! To the moon and beyond! Suggestions: - Use a fan when soldering, the smokey is bad for lungey - Twist the wires together before soldering, makes it a lot easier and more durable - Try making the main body resemble that of a Remington 700, I think the barrel is just the right length! - Carve an extra piece for a cheek rest - Try your hands at making a traditional trigger, for example glue two more pieces of wood onto a trigger area, and build the trigger assembly inbetween. I believe you can use a microswitch too for saving space! - Stay awesome! :)
Bro this is amazing, I really like the unique style you bring to your videos, and the unique blasters you cover! It’s insane how you’ve managed to create an amazing, successful channel in only two months! Keep up the great work dude!
There are these things called solder seal wire connectors that you put the 2 wires in and use a lighter. It also provides insulation and makes soldering especially small wires much easier.
imagine 3D printed parts so it would look like a nerf blaster, or maybe getting a nerf blaster and modifying the shell to fit these components. i also suggest posting short clips of your modified nerf blasters on other platforms, your work needs to be shown 💯💯💯
when you finish all the mechanics of it it would be so cool if you could make it to look like a musket, considering all the labor you gotta put into to fire a single shot
@@matt_yuan Lovely i just discovered your chanel and i got so engaged, ur chanel is actual good content, and i myself am not a nerf enthusiast keep it up dud ur amazing :)
I knew pretty early on that you'd upgrade the valve. However, I think it would be fun taking apart the rocket's valve to see how it works then making your own custom dump valve based on the rocket's valve. That way you are being true to the rocket by using its mechanism, albeit remade for more power. Edit: But do what you want. I'm just obsessed with triggers, valves, and mechanisms in general.
i havent had any interest in nerf for years. these vids are great matt. looking forward to even bigger production value content also the smoke from the solder is the flux burning off
U can use a water bottle for higher pressures although idk if u wanna keep the blast valve, also u can use two ninevolts in series to activate the solenoid
The fucking grater stock 😂oh my god that’s hilarious. Honestly, if the blaster could fire like mega darts or something they might fit in those holes as an ammo holder! Also, kudos to you for recognizing the dangers and dropping immediately. Air pump tanks are scary to mod with.
If you need 12v and decent amperage, I'd highly recommend airsoft batteries. Fully charged, "9.6v" NIMHs actually give 12v, and I doubt this kind of purpose would ever drain them. I would still check with a more electrically inclined person to be sure about safety though- if it's just a coil in there that consistently resists, then it should be fine. But I'd still put a fuse in the circuit to be safe.
I absolutely loved your vids, they remind me of the videos I used to watch as a child of diy ideas and I love your editing, your humor and all around everything! Keep up the great work!! I see your channel doing great!
You remind me a lot of when Michael reeves was starting out. Also, it may be beneficial to follow a template when cut out the frame again. And it may be a touch safer if you can move the tank away from your face.
Love your content!You could try using a drain blaster or maybe make a small tank using steel pipes then you just need to conect it to the solenoid valve.
At some point you should use a small servo for a similar pneumatic project and make the pump smaller but build up over more smaller pumps. Just have it constantly pressurized
If the release is before the "tank" the air is only being compressed and stored inside the line that goes from the pump to the release. I made a Extremely powerfull one by using a used mini fire extinguisher as a tank with a bike air valve to use it as an air tank. from there a line to the release valve and another line to the barrel. The thing is an ABSOLUTE BEAST. But bear in mind that there is a threshold between max usable power and the point where darts are completely destroyed. This can be pushed way further by using rival rounds though.
nice channel, never had a nerf blaster thingy, but i like to watch! ;p and.. it really doesent matter, if you do something wrong! but at the moment you begin to cut out these stuff, it gets boring! so thank you, for let us see! its entertaining!
When you modded the nerf longshot, how heavy was the stock spring, bc the stock fps for you was 38, but for my stock one it was already about 50. My stock spring seems to be about 4.5kg, maybe the older version is 2.5?
@@matt_yuan Tips if you do: -DO NOT UNDERCHARGE OR OVERCHARGE : Low voltage protection and the correct charger (balance charger) as well as charging bags (Hobbygrade 3S lipos are 11.1V nominal and 12.6V peak and can be had in a protective plastic outer case) -Do not reverse polarity/short circuit : They can dump all their power at once -DO NOT PUNCTURE: Goes for any batttery -Keep away from excessive cold (sub freezing) and heat (55C and up 130F): Goes for most batteries really -If battery swells "Forbidden capri sun" "spicey pillow" Dispose properly immidiately : Hobbyshops often have battery return options as do your local recycling center. You dont want to have your trash on fire
Check out this video for a detailed explanation of the air tank: th-cam.com/video/2i8ji8amev0/w-d-xo.html
I love your channel already ❤
Congrats on moving!!
I literally watched ALL of ur vids, I love u bro 💕
@@Gangster_Mario there's only four....
How is this comment 2 days before the video was posted bro?
Edit: Nvm I see you released it early to your channel members
im a time traveler
I can definitely see this guy going far as a creator, if he keeps this up he might be able to create something that can really affect he nerfing community.
Facts
This channel is on fire! To the moon and beyond!
Suggestions:
- Use a fan when soldering, the smokey is bad for lungey
- Twist the wires together before soldering, makes it a lot easier and more durable
- Try making the main body resemble that of a Remington 700, I think the barrel is just the right length!
- Carve an extra piece for a cheek rest
- Try your hands at making a traditional trigger, for example glue two more pieces of wood onto a trigger area, and build the trigger assembly inbetween. I believe you can use a microswitch too for saving space!
- Stay awesome! :)
I love your content! It's so simple, humble, and enjoyable, keep up the great work!
There used to be lots of old nerf blasters with bladders to keep yourself from making what is effectively a pipe bomb.
the magstrike etc
Bro this is amazing, I really like the unique style you bring to your videos, and the unique blasters you cover! It’s insane how you’ve managed to create an amazing, successful channel in only two months! Keep up the great work dude!
There are these things called solder seal wire connectors that you put the 2 wires in and use a lighter. It also provides insulation and makes soldering especially small wires much easier.
neat!
Absolutely violated that rocket
I love how this went from a rocket, to you making a BB gun that shoots nerf darts.
imagine 3D printed parts so it would look like a nerf blaster, or maybe getting a nerf blaster and modifying the shell to fit these components. i also suggest posting short clips of your modified nerf blasters on other platforms, your work needs to be shown 💯💯💯
when you finish all the mechanics of it it would be so cool if you could make it to look like a musket, considering all the labor you gotta put into to fire a single shot
soon
@@matt_yuan Lovely
i just discovered your chanel and i got so engaged, ur chanel is actual good content, and i myself am not a nerf enthusiast
keep it up dud ur amazing :)
I knew pretty early on that you'd upgrade the valve. However, I think it would be fun taking apart the rocket's valve to see how it works then making your own custom dump valve based on the rocket's valve. That way you are being true to the rocket by using its mechanism, albeit remade for more power. Edit: But do what you want. I'm just obsessed with triggers, valves, and mechanisms in general.
i havent had any interest in nerf for years. these vids are great matt. looking forward to even bigger production value content
also the smoke from the solder is the flux burning off
U can use a water bottle for higher pressures although idk if u wanna keep the blast valve, also u can use two ninevolts in series to activate the solenoid
Cool to see the new studio setup! I'm curious what the next version of this build will look like 👀
That preview at 0:44 had my nerf senses tingling
yo what’s up dan
The fucking grater stock 😂oh my god that’s hilarious. Honestly, if the blaster could fire like mega darts or something they might fit in those holes as an ammo holder!
Also, kudos to you for recognizing the dangers and dropping immediately. Air pump tanks are scary to mod with.
it was very scawy
You are doing great man! I definitely see you becoming a large creator in the future!
If you need 12v and decent amperage, I'd highly recommend airsoft batteries. Fully charged, "9.6v" NIMHs actually give 12v, and I doubt this kind of purpose would ever drain them.
I would still check with a more electrically inclined person to be sure about safety though- if it's just a coil in there that consistently resists, then it should be fine. But I'd still put a fuse in the circuit to be safe.
own a nerf musket for self defence just like the founding father intended lmaoo
right to foam arms
i love this so much , keep engineering man , great blaster.
So happy I discovered this man.
happy u found me!
Damn nobody talkin bout how he violated that rocket...
Be careful with the fumes from soldering! Make sure to not breathe them in, also with the heat shrink, I like to just use a lighter
For the 12 Volt requirement you can use a cheap rechargeable drill battery and then you will have a charging system for it also.
186 ft./s out of the most Jank Nerf blaster of all time (referring to the prototype)
Looks like the pipe rifle from fallout 4. Great video, as always!
absolutely loved the video as always! i reckon it wont be long until u become one of the big figures in nerf
Worth the wait. Great video, love the editing.
I absolutely loved your vids, they remind me of the videos I used to watch as a child of diy ideas and I love your editing, your humor and all around everything! Keep up the great work!! I see your channel doing great!
I don't mod nerf, I don't do anything with Nerf, my kid uses em. I just enjoy watching the creation.
You remind me a lot of when Michael reeves was starting out.
Also, it may be beneficial to follow a template when cut out the frame again.
And it may be a touch safer if you can move the tank away from your face.
This guy creates childhood dreams
FR
you should use a used co2 cartridge as an air tank since it can hold massive amounts of pressure
Never in my life did i expect to see a homemade rocket Nerf Musket but today is the day
This was a great video!
Beautiful thumbnail!
holy crap you should be a lot bigger on youtube man, I love your content so much, keep going!
His darts don’t go fast. They teleport
nyoom
This guy's video's are awesome, He has great potential.
you gon blow up bro
Man i love this channel
Nice! Also, nice nods to car culture with the shirt choices. That Rotary shirt is sick.
Love your content!You could try using a drain blaster or maybe make a small tank using steel pipes then you just need to conect it to the solenoid valve.
NERF SPRING MORTAR!
I love your videos man keep it up ❤
dang he really did just make a buttonlock nerf arquebus...
today i learned what an arquebus is ty
The goat is back baby!!
for some reason this is addicting even though i never liked nerf guns. great video!
I would love to see a classic nerf that also has the option to be pumped for an insane shot option
great vid! i suggest a mask or something when soldering bc i dont think the fumes from it are gonna be healthy
Yo asmr rocket building was actually nice 😅
You should mod the X-shot pro longshot into an absolute BEAST of a shotgun, me and my friend did it, and we could launch 6 darts at about 100-110 FPS
Try powering a nerf missile with a ESTES rocket motor!
maybe one day...
Oh boy, home-made singled titan time
Imagine you rig up an electric pump, and maybe find a make a breach system.
At some point you should use a small servo for a similar pneumatic project and make the pump smaller but build up over more smaller pumps. Just have it constantly pressurized
This is just an upgraded nerf sniper dude. -_-
LOVE IT!
you could've ran a couple of those 12v batteries in parallel to get more amps out of it so you could've used it without having a cable
I could see this being great for an underbarrel absolver launcher with threaded cylinders
tru
the first edition lookslike a homemade weaponfrom Fallout 4's Nuka-world dlc
This is a drain blaster with so many steps
I really like what you're doing in your videos. they remind me a lot of early youtube/instructables in the best of ways.
thanks!
that is really cool, keep up the good work man
ty!
Combining nerf blasters with rockets, you're insane! (in a good way)
Yooo love this channel
Incredible blaster, like holycow thats hittin hard!!
Drop more vids man 🔥
Bro why you dont put your custom nerf guns on a wall behind you it would be cool (btw you are a cool youtuber wish you luck)
that’s the plan
Maybe you could fix the prototype by replacing the plastic container with metal?
dude you're like the pyro from tf2 but with evil nerf instead of a flamethrower
I know this might be pushing the limits of nerf but here’s my suggestion:
Make a nerf apparatus that can fire 60 nerf darts per second.
Your videos are amazing, makes me want to find my old nerf guns and modify them!
add an electric pump next? or C02 canister
please keep making these
A proper grip/handle, a pump-action style prime (idk what to call it) and a more compact design would be amazing for the next version :D
gun safety: keep the finger off the trigger, and on the receiver
matt yuan:
Amazing we just need it to be put into a nerf blaster enclosure
He’s back!!
If the release is before the "tank" the air is only being compressed and stored inside the line that goes from the pump to the release. I made a Extremely powerfull one by using a used mini fire extinguisher as a tank with a bike air valve to use it as an air tank. from there a line to the release valve and another line to the barrel. The thing is an ABSOLUTE BEAST. But bear in mind that there is a threshold between max usable power and the point where darts are completely destroyed. This can be pushed way further by using rival rounds though.
your first statement isnt quite right, check the video linked in the pinned comment for an explanation
@@matt_yuan now it makes sense why it was not handling the pressure. Thanks!
np
How do you have so little subscribers your content is great
i can tell he likes cars because hes got donut merch
This one was worth rhe wait! Keep it up!
Matt is a car guy.
zoom zoom
i bet you could turn that pumping with the air into a like pump shotgun feel if you raised it higher and extended it by the barrel
nice channel, never had a nerf blaster thingy, but i like to watch! ;p
and.. it really doesent matter, if you do something wrong! but at the moment you begin to cut out these stuff, it gets boring!
so thank you, for let us see! its entertaining!
I feel like you could quite ez make that into a pump looking gun
KEEP THIS SHIT UP ITS SOOO GOOD
Rocket? No, Missile.
You should make a vid where you modify a nerf jolt to be able to break paper
great video!
When you modded the nerf longshot, how heavy was the stock spring, bc the stock fps for you was 38, but for my stock one it was already about 50. My stock spring seems to be about 4.5kg, maybe the older version is 2.5?
dunno
@@matt_yuan oh ok :/ lol, was a quick reply tho. Love your channel and i love seeing it grow!👍
Miata parking sign goes hard
miata is always the answer
@mattie_y you should give us a peek in the next video, what year?
2005 but i dont have it anymore :(
@mattie_y if you ever buy another, i make supercharger setups, could be an interesting side series 😉 but keep up the good nerf content
what do they sound like?
Nice to see a fellow miata enthusiast 🫠
miata is always the answer
Man do I love your videos and channel! ❤
i love your stuff, man!
1:58 no one’s gonna question this part..? 😂
There are 12V Highpower output LiPos . Make sure you have a low voltage protector though
i considered it but didnt wanna deal with all the safety hassles
@@matt_yuan
Tips if you do:
-DO NOT UNDERCHARGE OR OVERCHARGE : Low voltage protection and the correct charger (balance charger) as well as charging bags (Hobbygrade 3S lipos are 11.1V nominal and 12.6V peak and can be had in a protective plastic outer case)
-Do not reverse polarity/short circuit : They can dump all their power at once
-DO NOT PUNCTURE: Goes for any batttery
-Keep away from excessive cold (sub freezing) and heat (55C and up 130F): Goes for most batteries really
-If battery swells "Forbidden capri sun" "spicey pillow" Dispose properly immidiately : Hobbyshops often have battery return options as do your local recycling center. You dont want to have your trash on fire
Get this man a 3D printer 🔥🔥🗣️🗣️
i have one but i dont use it much
Hey, love the videos. What watch are you wearing? Looks like a Seiko to me, but I wasn’t sure
it's linked in the description!
You know, with just a bit of plastic, a hinge, and a spring, you can make a more comfortable traditional trigger
wait til u see what i'm cookin up in a future video