ฝัง
- เผยแพร่เมื่อ 30 พ.ค. 2024
- A look at my latest build - a Atomrc Dolphin rc plane. I always try to keep my builds clean with no messy wiring, but on this build I went the extra mile.
Want to help me keep making videos? www.buymeacoffee.com/gizfpv
Link to download 3d print files: www.thingiverse.com/thing:659...
00:00 Intro
1:45 3D Printed nose
4:16 Battery compartment and VTX
8:52 Flight controller and peripherals
18:38 LEDs
21:04 Flight and impressions - วิทยาศาสตร์และเทคโนโลยี
![เปิดบ้าน เปิด Supercar อั๋นโอกิ เคยเอา rolls Royce เเลกพระ องค์ละ 100 ล้าน l [Nickynachat]](http://i.ytimg.com/vi/FeGwJwXauZ0/mqdefault.jpg)
My Dolphin is also a sign of OCD wiring. The big bays made it relatively easy to practice the art of Wire-Fu. Nicely done Sir.
Very clean. To get the best of both worlds with the servo wires you could use an extension lead, then the extension can be tidy (possibly add a place for them on the 3D printed baseplate?) and the servos can just plug into them in a convenient place.
I am running a 2308 1300kv motor with an 8050 prop. It has like 1.5kg thrust and it's crazy. Yet it can cruise at like 1.5 amps if you really try.
Got about 20min flight time with a 1440mah 4s going down to 3.6V.
Now I keep thinking about how it would behave with a 2806 1300kv in there. 😁
All you built s are a master piece.
Very VERY well done. I love the cooling fan on the VTx. I do the same thing on all of my fixed wing FPV builds.
Clean build indeed. My powertrain upgrade includes: Motor: 2808 @ 1950KV, Prop: 6045, ESC: 80Amp,
Battery: 1800-2200mah 6S lipo for high speed flights / 4000mah 6s lion for long range endurance flights
With these upgrades the model easily reaches 120 mph.
How much of that 80a esc are you using?
@@CurtisRedfield with this setup my max amp draw is little over 60 amps. I prefer to have some more headroom, so I picked up 80A ESC.
Amazing build! Love your videos and the extensive amount of information you share. Pls keep it up.
Love a OCD build... nothing worse then a mess of wires everywhere. Still on my list get one of these. Great build..👏🏽
So far this is the best n clean wiring setup for dolphin ....150% better than mine definitely 😂
Inspiring build, thanks for sharing
Speaking of rain resistance, you can get tiny little silicone USBC port bungs for next-to-no money.
Beautiful build nice and clean
i’ve put a aos supernova 2207 with a 60-70A blheli_32 esc so that i can fly it on 4S with 7” (7042x2) props and on 6S with 5” (5036x3 or 5152x2) props. on the bench it looked great but still need to test fly it.
I also used servo arms to secure both canopies and cut relief holes in both canopies cause they like to blow off once you go over 100 mph 😅
sooo clean i love it!!
very well thought out.
my drivetrain = T-Motor F90 2806.5 1500KV, T-Motor F35A 3-6S, and a homemade 4S1P Molicell P45B pack (21700).
I use Aeronaut Cam Carbon Folding Propeller Blades 7x4", with a Pichler Prop adaptor (folding prop) KLS 58mm | Ø 4.0mm.
After multiple recommendations, I've gone for the F90 1500kv motor :)
For plate under battery, plastic nuts could be glue into foam, and then you can fix it with plastic screws. Fantastic wiring and setup.
Nice build, Giz, very nice build 👏👏
That really is neat!
I wonder if you could upload the tray files as a step file as well? I would love to remix them for my own components and a step file makes it soooo much easier to work with in CAD :)
Very nice build. May I recommend the T-MOTOR F90 2806.5 1500KV Wow!
Funny enough that's exactly the motor I've ended up ordering :)
Nice build. A great power train which runs on 4S for this aircraft (and can go just over 100mph without diving) is TMotor F80 Pro 2200Kv/Flash 6042 prop/50A ESC
Pretty clean. Build there.Giz really looking forward to the maiden on this one you outdid yourself. Take care
PS. WOW THOSE LEDS ARE BRIGHT
😄 hehe...."looking at you Painless 360"
Thanks for the video, good mods.
I'm on my 2nd and 3rd Dolphin's atm. A great airframe, enjoy.
Well done Giz. I'm going to try and make my next builds almost as clean as yours 😀
Just need to order a 3d printer. Thinking of the Bambu Labs A1 Mini.
Very clean build @giz, an idea on the servo would be to shorten the servo wire just inside the wing, and use an extension from the FC to reach the servo.
I would make it so you can disconnect and you can run the extension under the fc base. It would look a lot cleaner
Need to see how wings separate with your setup
Fantastic build, dude! Awesome looking airplane! 😃
Put a bigger motor in there! Absolutely!!!
Stay safe there with your family! 🖖😊
Oh great observations Bobby......stay safe there😂😂😂😂
Nice build! When I saw you put the two 3D prints in, my thoughts was immediately that's a lot of weight. My two Dolphins I put on a sunnysky 2216 1250Kv turning an 8x6 APC-E prop and that has lots of grunt!
Is that on 4s?
@@grahamdowns7055 Yes, 4S
Love your design work on the 3d-prints. Very professional and pragmatic designs, well thought out for access, snap-in mounting, etc. Good inspirations. The under-floor wiring has a zen feel and gives the whole project a polished finish. This is the most hot-rodded under hood wiring setup I've seen. Excellent craftsmanship.
For wing wiring connection, it might be possible to use pass-thru pins (like used on FC) to integrate floor plugs near the wing root area, with a second permanent run of wiring under to floor to the FC.
I've seen a few people turn the Dolphin into a twin, but that's pretty major, as requires a rethink interior layout to keep CG location balanced. This one way to level-up performance.
Yes i agree with you,3D printing certainly gives it a professional look.
I did actually consider changing the wing wiring, so that the electrical connectors were at the root of the wings. I saw someone who did that - they installed custom connectors with 3d prints in the wings. However when it came to the build I couldn't find his post, and was too lazy to design the parts myself lol. Something I might still do one day tho :)
@@gizfpv Finwing Hobby list "9+2 9W2 VTOL/UAV Connectors (male/female)" on their website under accessories. I've seen a number of models use these "9+2" (9 signal + 2 power) connectors. Beside Finwing, ZOHD uses on their lasted model. They can be found online from other sources as well. Not sure if they're a standard electrical connector repurposed, or not.
Hi giz! Followed your channel for years buddy!! I use to fly myself years back I still have my controller which is a taranis x9d plus is this still a good controller? Also I’m looking to get back into fpv flying would you recommend this plane and also what fc and fpv equipment would your recommend /tx camera etc? Keep the videos coming buddy!!
I’m just building one now, what a fantastic job you have made of yours, very impressive 😊, can’t wait to see your next video on it.
Ps…are you going to release your files for the prints, they look great, a lot of work their getting everything to fit nice., the vtx is in a perfect spot 👍🏻
Check the video description, I've just posted a link to download the 3d prints :)
I ran a 2216 2200 kv on 4s with a 6x6 prop and it was a rocket but I failed to upgrade to a 60a esc (from the 40a ) and the esc tripped while going 110 mph cause a fatal crash of the aircraft
how are those LED wired? where did you wire them to?
thanks
Awesome build - thanks for sharing! Will you be posting links to the STL files? Thanks.
Check the video description, I've just posted a link to download the 3d print files :)
@@gizfpv Thanks.
Well done! Do you have links to your stl files and a link to that 5v fan?
Check the video description, I've just posted a link to download the 3d print files. As for the fan, the one I used was this one:
www.amazon.co.uk/GDSTIME-Brushless-Computer-Cooling-40x40x20mm/dp/B085PT95GH/ref=sr_1_4?crid=32U8UV0RUZCTZ&dib=eyJ2IjoiMSJ9.VhP5azdc2a0q0dcILuDhV_j-cGmS7WS63VBbsNVJIc4MxKhzVzD94014QMTTdAg2_9YJg4eHmDrsyh_UWqeklLIrfu-89yU4N9J2ZzWIMudLOehlnvCP2lVf60SF4g6efcbywSOZpGc4dtXeGbLBlvJMe2qf6vekSXh6jRXT4d-AkoOf5zrwdbEM50akBSuHX2s5rXpaXEAymal3MIMPA42pSRDGtFwf-EodKqdpfwY.ERLtzD6zjqp3luyYMZBuplU2N7yurA13aslJUaFI3lg&dib_tag=se&keywords=gdstime%2B5v%2Bfan&qid=1714303079&sprefix=gdstime%2B5v%2Bfan%2Caps%2C110&sr=8-4&th=1
Im running iflight xing 2506 1500kv with 8x5 prop thrust is massive 2kg and my setup auw at just shy of 1kg
What size ESC do you use with that setup? What amp rating?
Is that on 4s?
@@gizfpv flycolor 35amps blheli. Current setup cruise at 3amps average on 65kph
@@grahamdowns7055 yes 4s
2806 1400kv on 6s 🚀
FPV Cycle 30mm-1420Kv;6S 3200 LiPo;X-CROSS HV 80A
Hey Giz, do you share your stl files? I would love to use them.
Check the video description, I've just posted a link to download the 3d print files :)
Great job, I love the dolphin! and where can I get these .stl files?
Check the video description, I've just posted a link to download the 3d print files :)
@@gizfpv Great, that's the best news for today!
The stock motor and prop isn't that great. Add in the limited current from the Lions and there's your underpowered answer....Great clean build though matey....I'm surprised at the position of your battery. Imagine if there was a GoPro brick up front too ..😮😮😏🇬🇧
The stock powertrain is just not great, I think when people say that the dolphin is a great aircraft they are mostly talking about their dolpin with an already upgraded powertrain.
Your dolphin defenetly isnt overwheight, but you should ask some people where they have their CG and what powertrain they have, maybe ask bonafidepirate
Well done ! Actually the extra weight with the original engine is not a good thing. To improve the model, why not a twin-engine 6S (watch youtube, a guy made the modification, the links to the STL files are available in his videos.
th-cam.com/video/AG0i__9VaIk/w-d-xo.htmlfeature=shared
I did actually originally think about doing this, but then saw the issues he had getting CG locked in. I wanted my build to be clean and didn't wanna be sticking nuts and bolts on the tail lol
Cheater!! LOL Making trays to hide your wires. Very tricky.