How To Wire a Super ATV 4500 lb. Black Ops Winch On a 2019 Turbo RZR
ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2024
- This is the part 2 of my install video where I show you how to wire a Super ATV 4500 lb Black ops winch. Im running the wires to the winch and controller. The other video showed how I mounted it over the diff.
#superatv.com
#rzrhowto
Link to the rocker switch- amzn.to/2u58rDs
Link to the winch- amzn.to/2Um3sIX
![[Watch Party] RoV Pro League 2024 Winter | ( Bacon Time Vs FS )](http://i.ytimg.com/vi/lD6z1BugdZw/mqdefault.jpg)
Thanks for watching. If this video helped you out please like and subscribe. Winch is working great with no issues and I do plan on changing the lighting of the switch where it lights up when the lights are on not when I push the button. SUBSCRIBE HERE: th-cam.com/channels/c4Nok7BF4uSPPEWbU4qr2g.html?view_as=subscriber?sub_confirmation=1
Link to the rocker switch- amzn.to/2u58rDs
Love this video! I ordered a winch for my rzr & have been scouring TH-cam for an install & you answered every question I’ve had about installing it myself!! Thank you!!
Glad I could help. It was a learning experience for me too.
Just to help me out. What were you searching for? Maybe some keywords so I can help others find this video. Thanks again
Grim Reaper RC Products I was searching 2019 rzr xp 1000 winch install
All in all its a pretty good video, On the connections at the winch you should installed some boots over the posts and always connect red before the ground, Remove ground first and install last always!
I put the boots on after I made sure everything worked right. Thanks
Excellent video my man ! Mine will be here tomorrow and will be going step by step your same process 🙏🏻
Thanks for watching. Glad it helped out. Everything has worked out good since then. No problems yet.
Grim Reaper RC Products you are the man keep up the great videos I have basically identical turbo rzr just added the fang lights they look great
What else you planning
Grim Reaper RC Products if I could send photos I added the dang lights and pod lights with led strip just added 33” havocs on 22” Msa so in love
Nice. I'm about to do a top cage for mine. Bought an enclosed trailer and it doesn't fit. Lol. Not sure if it will make TH-cam or not. Did you do any clutch work for the 33's
Thanks! Your video helped me a ton!
Glad I could help.
If you want the switch to be lit up at all times and not just when you push the buttons. you jump the 1-2-3 wires together and run them to the keyed on acc wire on the bar, instead of jumping wires 1-4, 2-5, 3-6 together.
Thank you. I have found out what to do and still haven't done it. That seems like a much better way to wire the led on the switch
I am doing the same in the am for my rzr 1000 thanks
Glad it helped you.
Great Video! Couple questions......Was there a reason why you went with the 4500lbs winch? I'm trying to decide between the 4500 and the 5000. Also did you have to buy an additional plate to mount the winch to the RZR? Thanks in advance for the help!
I went with the 4500 because a local vendor down the street had it in stock. Lol. Yes I bought an over the diff mount plate. They had that also.
Im putting 1 on my 2020.looks the same as far as mounting it.ill find a different spot for my solenoid. I put my light relays there.
Thanks for watching. It hasn't given me any problems yet
Thanks for the info. Whats the purpose of the red key on wire?
The idea was so the winch will not work unless the ignition is on.
@@GrimRZR ok thanks
Where did you get that bumper?! I’m looking for one for my xp1k non turbo.
www.cagewrx.com/CageWrx-XP-RZR-Front-Bumper-p/xp1kfbapc.htm
Hopefully this link works. I actually got it second hand but love it. Seriously thick and tough.
Do you have to have key on to use
Yes. It could easily be done differently but that's how I wanted it.
@@GrimRZR
Thanks that's the way I was wanting it
I have pigtail under the hood labled winch.im not sure how to use it yet.
Not sure. If you find out let me know. Thanks for watching
How do you get the rocker light to come with key on
I actually forgot to even look into it. I will post it here or on my Facebook page when I figure it out
This really helped me in cutting my SATV switch and changing it out with a matching rocker switch for my Teryx. The last pin that you had, I believe its #7, is for a negative wire from your battery, or at least that is what Waterwich had it listed as when I purchased my rocker switch off Amazon. You can look at it in the listing if interested : www.amazon.com/WATERWICH-Momentary-Rocker-Waterproof-illuminated/dp/B0749J6YY8.
Good video though!
Thanks. I'm going to look into it more for sure. After running with it I'm thinking about changing it to where the switch is illuminated when the lights are on not just when I use it.
@@GrimRZR If you do that change up please do a video for us! I would love to see how it turns out
Grim Reaper RC Products you should make a short video how to keep it illuminated when key is on
I can work on one. I will try and do one with key on lights illuminated and another version with lights on illuminated.
How to get rocker light to come on with key on
I need to try and figure it out. It's been forever and I wanted to get the rocker light to come on either with the key or maybe even when the lights are on
On the rocker switch , I have one blade not used , is that ok?
Should be. Some are just for illuminating lights in the switch
Yeah the switch still lights up what I figured was the blank blade if I hook that up it only illumantes when pressed. If I use the red wire already there it is always illuminated. Lol I just switch it. I’m leaving it blank. Thanks for helping. Have a great day.
@@2gunslefty glad it helped