Not sure why within the last 11 months when I look up leatherman mods this hasn't came up? But I appreciate the info you have provided and I'm about to start tinkering (fuck around, really) like you have. Thanks man, subbing.
@@EDCObsession Seriously this video answered a lot of questions The wave/signal combo, genius Swapped the signal blade with a wave wave blade but to have multitool and pocket knife, again genius!
no problem! thanks for all the help you gave me. i did address that one in the video, i was thinking about it but wasn't sure if i really needed it. I did show his 3D printed bit holders for the signal though
I was hoping to get the hammer mod for the skeletool from Metro's Q-Branch but it is a pit on the pricey side not to mention the hardware kit to complete the mod is sold on a seperate site and require a seperate $11 shipping. And also requires a mut v-cutter from leatherman to complete the mod. Putting the total price of the mod to be almost the same as 2 used skeletools. The absurd thing is, I'm still considering going for the mod even though I'm already broke 😂. Life's too short to not enjoy these sort of things
I like what you did with wave signal combo. Black oxide + OG comes pretty nice. I don’t have black oxide wave though but I do have 2 surge 1 standard and 1 is black oxide. Thanks got the idea and will be learning how to swap the tools. Black and Silver does look better than plain ones.
Haha I hadn't realised these were collectable. I had the original (I think) leather man that I had engraved my name on it on an old pantograph machine and the small screwbit attachment that was sold separately in nice leather holsters. Sadly lost that and about another couple hundred pounds worth of good tools from a bad bike rucksack bag. So anyone in Scotland with my leather man get in touch lol. I have the wave and that's been about it for me. Nice collection my man 👍
Очень хорошие идеи. Аккуратное хранение. Я подписался на канал. Спасибо. Very good ideas. Accurate storage of multi tools. I subscribed to the channel. Thanks.
I was selling it, and if I end up deciding to I can DM you on instagram to set it up, but I am actually debating swapping it in for the serrated blade so I am holding on to it for now. Thank you for watching, you are my favorite EDC channel and pretty much got me into modding so it means a lot!
Thanks for sharing. I enjoyed the video and the mods that you did. I have a few myself as I was trying to find the best tool for my EDC. If anything, your video is encouraging me to sell most of them. I am going to stick to the Wave + for tougher tasks, and then have a Skeletool CX and older Juice S2 for pocket carry. I’ve been debating on getting the “Stammer” from Shapeways for my Skeletool but it’s going to be $80 Canadian. Just not sure if it’s worth it. It’s great because it doesn’t affect the warranty but I don’t know how often I would use the hammer feature. If you have any advice, I would appreciate it.
I was looking at that too but I ended up selling my skeletool but I don't think I would have ended up buying the stammer, the usefulness doesn't justify the cost imo
I'm 2 years late to the party. Was wondering, do you know off hand what blade will replace the combo blade from any other Leatherman tool? I want a signal but I want a straight blade or all serrated blade. And replace the saw with scissors. Great video
all of the 3d printed parts are metal, according to zapwizard: "The part is made by bonding stainless steel powder in layers. The part is then sintered and impregnated with bronze to fully meld the two metals together (60% SS, 40% Bronze). "
The custom parts are excellent and MaxLvLEDC & MeZilllch have fantastic ideas. I don't wish to be rude, but you've made quite a lot of modifications just for the sake of it. Rather than the function you've gone for novelty, like nothing is allowed to be factory. This isn't a side of the EDC community I'm familiar with. All my mods are functional so I'm struggling to understand the "mods for mods sake". Your collection seems to be like Gold plating a Tread. Do you even EDC carry one & use these tools ?
Not sure why within the last 11 months when I look up leatherman mods this hasn't came up? But I appreciate the info you have provided and I'm about to start tinkering (fuck around, really) like you have. Thanks man, subbing.
No problem, thanks for watching!
@@EDCObsession
Seriously this video answered a lot of questions
The wave/signal combo, genius
Swapped the signal blade with a wave wave blade but to have multitool and pocket knife, again genius!
Thanks for showing my mods! You may also like the ones from Metro's Q-Branch on Shapeways. He has a hammer for the Skeletool which is pretty cool.
no problem! thanks for all the help you gave me. i did address that one in the video, i was thinking about it but wasn't sure if i really needed it. I did show his 3D printed bit holders for the signal though
I was hoping to get the hammer mod for the skeletool from Metro's Q-Branch but it is a pit on the pricey side not to mention the hardware kit to complete the mod is sold on a seperate site and require a seperate $11 shipping. And also requires a mut v-cutter from leatherman to complete the mod. Putting the total price of the mod to be almost the same as 2 used skeletools. The absurd thing is, I'm still considering going for the mod even though I'm already broke 😂. Life's too short to not enjoy these sort of things
Maaaaannnnnn that signal/wave+ hybrid tool looks so rad. I might actually try that out with my own tools
thanks man
@@EDCObsession do you have a video of you modding your signal/wave+ hybrid?
@@fluiditytf2 no i don't, sorry. but it is the same process as any hybrid style leatherman mod
Great video! I enjoyed it very much! You have a very nice collection!
thanks for watching!
I like what you did with wave signal combo. Black oxide + OG comes pretty nice. I don’t have black oxide wave though but I do have 2 surge 1 standard and 1 is black oxide. Thanks got the idea and will be learning how to swap the tools. Black and Silver does look better than plain ones.
Haha I hadn't realised these were collectable.
I had the original (I think) leather man that I had engraved my name on it on an old pantograph machine and the small screwbit attachment that was sold separately in nice leather holsters. Sadly lost that and about another couple hundred pounds worth of good tools from a bad bike rucksack bag. So anyone in Scotland with my leather man get in touch lol. I have the wave and that's been about it for me. Nice collection my man 👍
Very cool tools sir
Очень хорошие идеи. Аккуратное хранение. Я подписался на канал. Спасибо. Very good ideas. Accurate storage of multi tools. I subscribed to the channel. Thanks.
beautiful modding - thank you
Wow awesome
Awesome work! Btw I'll buy that p4 saw from you if your interested
I was selling it, and if I end up deciding to I can DM you on instagram to set it up, but I am actually debating swapping it in for the serrated blade so I am holding on to it for now. Thank you for watching, you are my favorite EDC channel and pretty much got me into modding so it means a lot!
@@EDCObsession means a lot! Keep it up!👍
Great mods!
thanks for watching!
Any chance you can do a tutorial on how to get an awl one a wave?
Thanks for sharing. I enjoyed the video and the mods that you did. I have a few myself as I was trying to find the best tool for my EDC. If anything, your video is encouraging me to sell most of them. I am going to stick to the Wave + for tougher tasks, and then have a Skeletool CX and older Juice S2 for pocket carry. I’ve been debating on getting the “Stammer” from Shapeways for my Skeletool but it’s going to be $80 Canadian. Just not sure if it’s worth it. It’s great because it doesn’t affect the warranty but I don’t know how often I would use the hammer feature. If you have any advice, I would appreciate it.
I was looking at that too but I ended up selling my skeletool but I don't think I would have ended up buying the stammer, the usefulness doesn't justify the cost imo
did you ever sell your Skeletool CX? would love to buy it off you
Sold it a while ago, sorry
Why you stopped making videos ? There are great
I'm 2 years late to the party. Was wondering, do you know off hand what blade will replace the combo blade from any other Leatherman tool? I want a signal but I want a straight blade or all serrated blade. And replace the saw with scissors. Great video
for a signal the blade is proprietary to that model i think but you may be able to get a 3d printed utility blade holder
YOU SHOULD PUT A TSHANK ON YOUR SIGNAL WAVE COMBO INSTEAD OF THE SAW DUDE!
Where did you source the wood saw on the Bond from?
I got it from a rebar
How much would you sell the half signal with the bit holder an blade
not for sale, sorry
So the scalpel holder what meterial is that. Is that metal or some kind of plastic like pla or petg ( it was 3d printed right?)
all of the 3d printed parts are metal, according to zapwizard: "The part is made by bonding stainless steel powder in layers. The part is then sintered and impregnated with bronze to fully meld the two metals together (60% SS, 40% Bronze). "
I wanna buy that first modded signal/ wave
I have since disassembled it, but how much were you thinking? Just curious
What vault bag is that?
its the vault secure case
The custom parts are excellent and MaxLvLEDC & MeZilllch have fantastic ideas.
I don't wish to be rude, but you've made quite a lot of modifications just for the sake of it. Rather than the function you've gone for novelty, like nothing is allowed to be factory.
This isn't a side of the EDC community I'm familiar with.
All my mods are functional so I'm struggling to understand the "mods for mods sake".
Your collection seems to be like Gold plating a Tread. Do you even EDC carry one & use these tools ?
Great mods!