How to Replace Inner Tie Rod 2003-2008 Toyota Corolla

แชร์
ฝัง
  • เผยแพร่เมื่อ 2 เม.ย. 2023
  • Buy Now!
    New Tie Rod from 1AAuto.com 1aau.to/ia/1ASTE00232
    This video shows you how to replace the inner tie rods on your 2003-2008 Toyota Corolla. The inner tie rod has a ball joint that can wear over time, causing a clunking noise, loose steering, and eventually, other problems with the wheel and suspension components. It’s a good idea to replace your inner tie rods as soon as you notice any of these symptoms.
    This repair was done on a 2008 Toyota Corolla S 1.8L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
    2003 Toyota Corolla
    2004 Toyota Corolla
    2005 Toyota Corolla
    2006 Toyota Corolla
    2007 Toyota Corolla
    2008 Toyota Corolla
    Tools you will need:
    • 19mm Wrench 1aau.to/oR5/1AXAA00010
    • 22mm Wrench
    • 17mm Socket 1aau.to/obi2/1AXAA00015
    • 21mm Socket
    • Inner Tie Rod Removal Tool 1aau.to/oaF/1AXAA00438
    • 1/2 Inch Impact Gun 1aau.to/oqB/1AXAA00252
    • 1/2 Inch Breaker Bar 1aau.to/oqu/1AXAA00078
    • Torque Wrench 1aau.to/oaw2/1AXAA00044
    • Anti-Seize Grease
    • Hammer
    Subscribe: / @trq
    Check out our playlist:
    Toyota Corolla 9th Generation 2003-2008: • Toyota Corolla 9th Gen...
    ⚠ DISCLAIMER:
    While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
  • ยานยนต์และพาหนะ

ความคิดเห็น • 26

  • @TRQ
    @TRQ  ปีที่แล้ว

    √ Watch the Video
    √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
    √ Do it Yourself
    √ Save Money

  • @Eurospec73
    @Eurospec73 6 หลายเดือนก่อน +4

    I’m glad I came across this video, I’ve been having these clunking noises for well over 2 years, No mechanic was able to figure it out but i happened to see another TH-cam video that it was a clunking inner tie rod noise so I just watched this video as it was a more detailed DIY, for future reference. Please use PB blaster on rusted bolts. it’s painful to watch you remove those nuts and take the chance of stripping and rounding it out, that PB blaster will save you the headache!

    • @TRQ
      @TRQ  6 หลายเดือนก่อน

      +@Eurospec73 Thanks for the tip! We'll pass this info along to our production team. 1aau.to/m/Shop-TRQ

  • @Nex5Network
    @Nex5Network 8 หลายเดือนก่อน +2

    kudos for showing a worst case scenario super rusted outer tie rod end

  • @diegog2924
    @diegog2924 9 หลายเดือนก่อน

    Excellent video! Camera perfect 🙌🏽

  • @deedaartyst
    @deedaartyst 2 หลายเดือนก่อน +1

    ayyyyye, way 2 show tackling rusted car parts on camera🤙👍👍👍

  • @TeezerDriz
    @TeezerDriz 4 หลายเดือนก่อน

    Great video.

  • @jasonjansen69
    @jasonjansen69 7 หลายเดือนก่อน

    Thank you sir this video was very helpful 👌

  • @davida871
    @davida871 9 หลายเดือนก่อน

    Very help video. Purchased mine recently to do this job.

  • @ghostbandit-
    @ghostbandit- ปีที่แล้ว +2

    Thank you I have been stumped for to long on how to replace it

    • @TRQ
      @TRQ  ปีที่แล้ว

      +GhostBandit Thanks for watching our video! 1aau.to/m/Shop-TRQ

  • @elmaestro4kdelsalvador658
    @elmaestro4kdelsalvador658 5 หลายเดือนก่อน

    Eres un maestro de la mecánica

  • @rupterripillay7777
    @rupterripillay7777 3 หลายเดือนก่อน

    Hi excellent video... do you have a video for replacing the control arm bushes on the same vehicle

  • @fraserthomson5766
    @fraserthomson5766 ปีที่แล้ว +4

    My inner tie rod didn't come with a new washer, is it ok to reuse the old one?

  • @edbrandt8972
    @edbrandt8972 11 หลายเดือนก่อน +1

    Is it the same procedure for a 2003 Pontiac Vibe?

  • @hagi_
    @hagi_ 12 วันที่ผ่านมา

    How about the inner tie rods for a 7th gen civic? Thanks

  • @d.s.dahiya3408
    @d.s.dahiya3408 5 หลายเดือนก่อน

    hello. nice video, how much is the labor charge to replace tie rods?

  • @louischoi2883
    @louischoi2883 หลายเดือนก่อน

    how hard is it to break free the inner rod? I got a 1/2 210nm Torque wrench not sure if it's enough?

  • @miaramos3327
    @miaramos3327 5 หลายเดือนก่อน

    Hi, Do you have a youtube video for a 2016 Toyota corolla

  • @Leo-ov9gv
    @Leo-ov9gv หลายเดือนก่อน

    can you still replace the inner tie rods if youve already put on new tie rod ends? can they still work?

  • @johnmcminn9455
    @johnmcminn9455 10 หลายเดือนก่อน

    can you reuse the washers ?

  • @BrandoRios-d1z
    @BrandoRios-d1z 5 วันที่ผ่านมา

    Cómo se llama la herramienta?

  • @jesusvillanueva2616
    @jesusvillanueva2616 3 หลายเดือนก่อน

    Why does my car make a roaring sound when turning left I switched the knuckle and axlefrom the driver side

  • @matthewflores4120
    @matthewflores4120 10 หลายเดือนก่อน +1

    It took me 3 hours to replace the inner and outer tie rods 🫠 is the steering supposed to feel super stiff after replacement? I already got an alignment

  • @miguelramos3998
    @miguelramos3998 11 หลายเดือนก่อน

    Please rigth side

    • @TRQ
      @TRQ  11 หลายเดือนก่อน

      +Miguel Ramos The part in this video fits your application, and the install should be the same or similar. Buy this part on 1AAuto.com: 1aau.to/m/Shop-TRQ