2004 Ford F150 Window Regulator

แชร์
ฝัง
  • เผยแพร่เมื่อ 7 ก.ค. 2024
  • Go Here to Identify which cab you have and find the appropriate regulator for your truck: www.apdty.com
    Click the above link to find the window regulator for your vehicle. In this video we'll show you how to replace the window regulator on a 2004 Ford F-150.
  • ยานยนต์และพาหนะ

ความคิดเห็น • 119

  • @mikeboltz2829
    @mikeboltz2829 8 ปีที่แล้ว +12

    I wasn't going to attempt this but your video made it look so simple and easy and it was. I called the dealer and their price was $387 for part and instillation. After watching your video I ordered the part, which cost less than $80 and did the instillation myself. It was easy and only took about 45 minutes from start to finish! Thank you for saving me some money....

    • @APDTY
      @APDTY  8 ปีที่แล้ว

      +Mike Boltz Awesome to hear!!

  • @diy2dmax01
    @diy2dmax01 12 ปีที่แล้ว +1

    Wow! This was a life saver! My window failed today and stopped by dealer to find out if there was an easy fix to get it up. They said no. So I asked how much it would cost to fix it. $450. Immediately went to parts department and found out part was $156.00. Bought a Chilton book on my way home and it left out vital information. My girlfriend looked up this video and we were on our way! Successfully replaced the regulator and window motor within 2 hours. Thanks so much!!!!

  • @guitarfxer
    @guitarfxer 12 ปีที่แล้ว +1

    My passenger window fell while I was on a roadtrip. $500 at a Ford dealer in GA. My drivers's side just fell. I'm now fixed for less than a $100! Many Thanks! Great job!
    Guitarfxer

  • @adanvjr
    @adanvjr 12 ปีที่แล้ว +1

    A month ago, a group of thugs broke into cars in my area. They tried to get into mines by forcing the window down but couldn't, but succeeded in destroying the regulator.
    Thanks for the detailed video. I really helped me a great deal and I saved a lot money doing it on my own. I replaced the regulator within an hour (including driving to O Reilly's to pickup a new one).

  • @THEREALSethJacobs
    @THEREALSethJacobs 11 ปีที่แล้ว

    I used this video back in December as a guide. Saved me $225. Do the exact steps in the video and you're fine.

  • @onehomeslice
    @onehomeslice 11 ปีที่แล้ว

    YOU ROCK!!! I had an issue with my window regulator and went to the Ford dealer. $425 to repair it?!?! I looked it up on TH-cam and figured I'd give it a try. I'm not the most skilled at auto repair but the video was spot on and super easy to follow. I bought the parts online for $100 which was $70 cheaper than what the Ford dealer wanted. Video was awesome, issue fixed and it was EASY! Save some cash and do it yourself... You can, I did! If you're in Michigan, beers on me!

  • @centoguzzi
    @centoguzzi 11 ปีที่แล้ว

    I replaced the rear window regulator on my 2005 F150 Super Crew. The procedure is the same. Also it was much easier to replace than I first thought. Your video was a great help. If a person has basic mechanical skills, there is no reason to pay someone to do this job.

  • @mikepeterson238
    @mikepeterson238 4 ปีที่แล้ว +1

    Excellent video. Clear, easy instructions. You saved me serious time pointing out just loosening outer bolts (not removing) and to check it before installing the door panel. My 2004 was reverse polarity, after panicking testing it I found a reverse polarity plug in the box.

  • @ahokie
    @ahokie 11 ปีที่แล้ว

    Second time I had to go back to this video for another door on my f150. Ordered from their site and paid half for the OEM part versus the dealer. Thanks again for this great video. I have two more windows on my supercrew and I am sure I will be back again!

  • @HalsPals
    @HalsPals 8 ปีที่แล้ว +1

    I replaced the driver's side regulator and switch a couple of years ago. Pretty easy but I forgot what it involved. Thanks for the reminder and extra tips! Parts are now on the way for the passenger side. Despite these little hiccups, I still love my 2004 Ford F-150! It's been relatively problem-free since I purchased it new.

    • @HalsPals
      @HalsPals 8 ปีที่แล้ว

      +Victor D. Easley EZ stuff. Just remember to loosen the bolts on the new regulator before installing.

  • @sarahtaylorweatherford5549
    @sarahtaylorweatherford5549 11 ปีที่แล้ว

    had the same problem on my f 150, the video helped me big time,, knocked it out in about an hour or so,, without this video it would have take much longer,,,, saved me some big dollars

  • @sirrat12461
    @sirrat12461 3 ปีที่แล้ว

    i looked at this video and i decided to do it myself. Thank you!!!!!! it went very smooth and hardly any issues whatsoever.

  • @desertrat2777
    @desertrat2777 9 ปีที่แล้ว +1

    Flat awesome video. I was a bit intimidated to take on the task, but after watching your video I moved forward. You cover small details that NAPA fails to mention in their instructions, like the removal of the speaker offsets. I replaced the regulator instead of trying to repair it. Great instructions! Thank you. You saved me $150+ labor at the shop.

  • @08lightning
    @08lightning 12 ปีที่แล้ว

    Just ordered mine from you guys. Thanks for answering my questions and making sure I ordered the right part from you. Great customer service, and great video.

  • @1musiclvr
    @1musiclvr 12 ปีที่แล้ว

    Just wanted to say thanks for the outstanding video. There's no way I would've even thought about attempting this repair but have now, thanks to the video, I've done it sucessfully and will be ready if another fails. Thank you!

  • @marcotony15
    @marcotony15 12 ปีที่แล้ว

    thanks so much man. you've save me a couple of hundred dollars to my mechanic that i dont have. Thank you!

  • @72MAV
    @72MAV 13 ปีที่แล้ว

    I just wanted to say thank you very much for this making this video. I have an 04' and the drivers door window fell 3 days ago. I replaced the regulator and motor today and it would have been a lot harder if not for your helpful video. Thanks Again!!

  • @kencompton6422
    @kencompton6422 8 ปีที่แล้ว +1

    Thanks for the excellent and thorough video! Was able to tackle my own F150 power regulator replacement without a hitch, after watching your instructions....Great!

    • @kencompton6422
      @kencompton6422 8 ปีที่แล้ว +1

      +Ken Compton One thing to add....some replacement regulators do NOT come with the mounting screws, so be sure to save the old screws, just in case!

  • @cglaguna
    @cglaguna 9 ปีที่แล้ว

    thank you for the clear instructions, I used this video and another one on repair of the problem to get a clear understanding. I repaired two today, front passenger and Rear driver for $.02 using two nails that I had already. That was what? $400+ in repairs for three hours and $.02 cents Thank you!

  • @darinandalinahouse9596
    @darinandalinahouse9596 ปีที่แล้ว

    Thanks so much for doing this. This is something I’ve always dreaded to do. I put a new window motor in my 83 Camaro when I was a teenager and it was a nightmare. You made this look so easy I decided to go for it and it turned out to be no big deal. I didn’t order the part from you because I needed to get it replaced today. If you had a donate button on here I would gladly do so.

  • @imarushfan
    @imarushfan 12 ปีที่แล้ว

    I had to do a rear door on my extended cab. It was slightly different but this info was invaluable. Thank you so much!

  • @steinerlakesnake4678
    @steinerlakesnake4678 9 ปีที่แล้ว

    Just followed this video and changed out my window regulator on my 2005. Thanks great video.

  • @jonasmeans1
    @jonasmeans1 11 ปีที่แล้ว +1

    Just finished the job -big thanks for the video. Note, make sure you know if you have a 43 or 50 inch door before buying regulator. Likewise the polarity will be different so you have to rewire or purchase an adapter on the power connection on some F150's. Feels good not paying $400.

  • @rob1c5
    @rob1c5 13 ปีที่แล้ว

    Thanks a lot! You just saved me a lot of money. I really appreciate you laying out these steps in a way that I could understand. Thanks again!

  • @coreyaudet4297
    @coreyaudet4297 7 ปีที่แล้ว

    Thank you for taking the time to do this. Helped me a ton!

  • @FatRobsFishing
    @FatRobsFishing 10 ปีที่แล้ว +2

    Thanks for the video made the installation very simple!

  • @dw232618
    @dw232618 13 ปีที่แล้ว

    thanks man, saved me $125 and only took about an hour!

  • @leonmaster5182
    @leonmaster5182 7 ปีที่แล้ว +1

    Man! Wish I could buy you a beer heck the whole 18pack, you do not know the headache and $$$$ money you've saved me god bless you brother! I was able to do this job just the way you described it. I feel like I can take on anything Thx to you brother Muah a kiss in the forehead. Cheers!😎👍🍻

  • @Randel1966
    @Randel1966 11 ปีที่แล้ว

    Great video. I had my window stuck in the down position, and couldn't reach the bolts that clamp window to regulator, so I had to take motor apart to raise window. Thanks again.

  • @JoshuaTreeTv
    @JoshuaTreeTv 11 ปีที่แล้ว

    Thanks so much for the video. Details were spot on and I saved a tonne of cash doing it myself.

  • @chuckwolfe4688
    @chuckwolfe4688 10 ปีที่แล้ว

    Nice job! Thanks, I have the same issue w/ my '05 F-150 and now know how to pull out the regulator.

  • @Dawgator
    @Dawgator 11 ปีที่แล้ว

    You guys are GREAT! Easy parts ordering and super help via phone! GO APDTY!

  • @airpilikia
    @airpilikia 12 ปีที่แล้ว

    @APDTY I ended up cutting and splicing them. Thanks. Great video.

  • @stevetolliver8599
    @stevetolliver8599 2 ปีที่แล้ว

    Thank you for posting this. I have subscribed but hopping I won’t need to watch that often haha. Really it went great after following your fantastic instructions. The best to you and your family . Be safe

  • @APDTY
    @APDTY  12 ปีที่แล้ว +1

    @traficante50 That sounds like it could be either the motor or the switch, the switch has a relay on the inside of it which could make a buzzing noise if it starts to fail. The easiest way to test it would be to pull the switch off and try operating the window while the switch is near your ear, you should be able to distinguish if the noise is coming from the switch or inside the door panel.

  • @APDTY
    @APDTY  11 ปีที่แล้ว

    Glad we were able to help! Thanks

  • @FelipGama
    @FelipGama 12 ปีที่แล้ว

    You have save me hundreds of dollars with this video. Thank you!!!!!!!!

  • @randyfroysland2892
    @randyfroysland2892 ปีที่แล้ว

    Did mine yesterday good step by step instruction thanks a lot

  • @arkbluewolf11
    @arkbluewolf11 10 ปีที่แล้ว

    I second that.Thanks for the video made the installation very simple!

  • @janec8966
    @janec8966 9 ปีที่แล้ว

    Thank You So So So Much! With your excellent tutorial, I felt confident enough to replace my own drivers side window motor - and it works - and it's AWESOME! RAWR! :)

  • @lynwoodcollins8545
    @lynwoodcollins8545 8 ปีที่แล้ว +3

    I did it thanks to your video. Fantastic!!

    • @APDTY
      @APDTY  8 ปีที่แล้ว +1

      +Lynwood Collins Aweomse!! Thanks For Watching

  • @dwaynewaterman
    @dwaynewaterman 11 ปีที่แล้ว

    great video. i plan on attempting this procedure this weekend.

  • @jenredmon78
    @jenredmon78 11 ปีที่แล้ว

    This video is awesome. Saved me time, money and aggrevagtion!! Thanks!

  • @sinnedam
    @sinnedam 11 ปีที่แล้ว

    about to have to do this myself. great prep video. i know exactly what to do now.

  • @macnlace
    @macnlace 11 ปีที่แล้ว

    GREAT VIDEO!! I will be attempting the rear door in my 04 Super Crew tonight. Then the suburban, then the honda...... man something about me and regulators..

  • @bassmaster1930
    @bassmaster1930 ปีที่แล้ว

    Great video..took me 20 min..hats off to you sir👍

  • @1266kickstart
    @1266kickstart 12 ปีที่แล้ว

    used it to do my window today... thanks for the video

  • @mexusasingreat5611
    @mexusasingreat5611 3 ปีที่แล้ว

    Excellent job. Very explained

  • @APDTY
    @APDTY  12 ปีที่แล้ว

    @kipp3r84 It's probably the regulator, the noise you describe is usually a regulator on it's last legs just trying to hang on. You will likely find some of the plastic parts of the regulator broken once you open up the door.

  • @javilo1027
    @javilo1027 8 ปีที่แล้ว

    Thank you sooo much for saving me $400 which is what the dealer wanted to charge me.

  • @APDTY
    @APDTY  12 ปีที่แล้ว

    Thanks!! If you have any questions when going to install it, feel free to get in touch with us!

  • @federicovillanueva3773
    @federicovillanueva3773 6 ปีที่แล้ว

    thanks man it help me a lot now I can do it myself

  • @APDTY
    @APDTY  10 ปีที่แล้ว

    At least we got the point across, you knew what we were talking about lol :)
    "What's in a name? That which we call a rose by any other name would smell as sweet."
    -William Shakespeare

  • @sslicker1
    @sslicker1 12 ปีที่แล้ว

    very detailed.....great video keep up the good work

  • @APDTY
    @APDTY  12 ปีที่แล้ว

    @iTzMeChucky When it gets stuck, do you hear the motor still continuing to run? I know the power window switches are common to fail in those trucks, and it will just randomly stop, if the switch is bad though, you won't hear the motor running when the window is stuck.

  • @APDTY
    @APDTY  12 ปีที่แล้ว +1

    @airpilikia The wires going to the motor are reversed? if that's the case, someone on an assembly line was snoozing when putting that plug together, you can either cut them and resplice them, or pull the pins of out the pigtail (there is usually a little catch tab to pry up on to release the pin) and switch their positions in the pigtail itself.

  • @usfloser
    @usfloser 13 ปีที่แล้ว

    Perfect video man!!! Yessssss. I needed this big time

  • @montyshelby
    @montyshelby 6 ปีที่แล้ว

    Thank you so much very informative awesome video

  • @Troc89
    @Troc89 13 ปีที่แล้ว

    Great video! Thank you for taking the time to show us all of these steps.

  • @jhodges121
    @jhodges121 11 ปีที่แล้ว

    Thanks for the video!!! It was right on point !!

  • @Ilovesmnp
    @Ilovesmnp 12 ปีที่แล้ว

    Thanks for The Video and Time,this really helps.

  • @robnation2475
    @robnation2475 4 ปีที่แล้ว

    If you have creaking or squeaking F150 regulators use 3M red synthetic grease on the cables and pulleys. I greased mine 5 or 6 years ago and they've been fine since.

  • @JesusOrtiz-ow7zu
    @JesusOrtiz-ow7zu 5 ปีที่แล้ว +1

    Nice man 👍 saving everybody 💰 u da Man

  • @jDuBs8o
    @jDuBs8o 13 ปีที่แล้ว

    @APDTY thank you very much

  • @RICOCORTEZ78
    @RICOCORTEZ78 7 ปีที่แล้ว

    thanks I'll try to do it myself. thanks for the video

  • @EM-mp4kp
    @EM-mp4kp 7 ปีที่แล้ว

    Good video 👍🏻 made my project easier

  • @jfair1914
    @jfair1914 13 ปีที่แล้ว

    Great video. I'm not a handy person but I performed this job fairly quickly. Thanks. I also ordered the parts from you guys and the prices were great. Thanks again.

  • @darrelllinders168
    @darrelllinders168 11 ปีที่แล้ว

    Excellent video

  • @FourthBattalion
    @FourthBattalion 13 ปีที่แล้ว

    Just what needed. Thanks

  • @xBloufx
    @xBloufx 12 ปีที่แล้ว

    Do you have a video for the rear door on the f-150 super crew? I have replaced the front already and someone said the rear was different.

  • @APDTY
    @APDTY  12 ปีที่แล้ว

    We do not yet have a video on the rears, the rears are slightly different, but the same basic procedures can be followed. (Find hidden bolts, remove door panel, remove regulator). We hope to have a video for a rear door eventually. Thanks

  • @TheSj1811
    @TheSj1811 9 ปีที่แล้ว

    This is an awesome video and I've been successful thus far,but I can't get those plastic clips out that you said should just pop right out?! Any help on that ??

  • @juliojustiniano4619
    @juliojustiniano4619 2 ปีที่แล้ว

    Perfecto amigo thanks 😅

  • @fiverhoo
    @fiverhoo 10 ปีที่แล้ว

    very helpful thanks!

  • @robnation2475
    @robnation2475 4 ปีที่แล้ว

    A suction cup is handy to hold the glass up. (I like using a dual suction cup with a handle)

  • @APDTY
    @APDTY  13 ปีที่แล้ว

    @ndchevy Most Likely, What type of vehicle is it?

  • @josegomez-nr4ud
    @josegomez-nr4ud 3 ปีที่แล้ว

    thank you Sr.

  • @SwimMaster101
    @SwimMaster101 7 ปีที่แล้ว

    Just to make sure that this would be the piece that needs to be replaced in my car, my passenger side window rolls down just fine but won't go up using either switch on the passenger or driver side. Should I be thinking something else in the problem or buy this piece and install it?

  • @HimmelChef
    @HimmelChef 11 ปีที่แล้ว

    Hey question for you. For my 05 fx4 I have a super crew cab do I just order a front drivers regulator for the rear drivers side window?

  • @Oreo_5oh
    @Oreo_5oh 12 ปีที่แล้ว

    @APDTY I hear the motor still spinning when it gets stuck, is it a sign that my regulator assembly needs to be replaced completely?

  • @Oreo_5oh
    @Oreo_5oh 12 ปีที่แล้ว

    @APDTY Hey man I have a question, I have an 04' F-150 Super Crew, My driver window goes up and down, but every once in a while it will get stuck for a second and the catch back up with the motor, is the track loose? or what might be the problem.

  • @SwiftXZ
    @SwiftXZ 12 ปีที่แล้ว

    thank you very much for reply

  • @GranTorino429
    @GranTorino429 12 ปีที่แล้ว

    Very helpful.

  • @MrKillovision
    @MrKillovision ปีที่แล้ว

    Struggling with one of the plastic pieces behind the speaker. I wish you had said what socket you used. Also, I have a giant blood blister on my dominant thumb, so, probably restricted by that.

  • @PabloReyes-ye9dv
    @PabloReyes-ye9dv 4 ปีที่แล้ว

    Chingon la mera verdad gracias

  • @smokinblunt482
    @smokinblunt482 10 ปีที่แล้ว

    Explicable muy vien y se ve muy vien el trabajado y es eselente

  • @jDuBs8o
    @jDuBs8o 13 ปีที่แล้ว

    Is it likely that replacing JUST the regulator will do the job? I see you can buy a regulator or a regulator/motor kit.

  • @traficante50
    @traficante50 12 ปีที่แล้ว

    I have an 07 f150 suprecrew,my front driver side window won't go up or down a few days back it started making a small buzzing noise when going up or down,you think it's the motor gone bad.

  • @APDTY
    @APDTY  12 ปีที่แล้ว

    The book time on this regulator calls for 1 hour of Labor, So it would depend on what your local labor rate is. If it's $100 per hour of labor, that would be $100 plus the part cost.

  • @APDTY
    @APDTY  11 ปีที่แล้ว

    I am not sure of the exact procedure for the rear doors, but if you follow the basic template that we used in this video you should be fine. Just note that the location of the screws/bolts may have changed, other than that it should be nearly identical.

  • @kipp3r84
    @kipp3r84 12 ปีที่แล้ว

    ill be doing this on the weekend, my window makes a horrible screaching noise and not sure if its the motor or the regulator, it still moves up and down. any ideas?

  • @APDTY
    @APDTY  13 ปีที่แล้ว

    @jDuBs8o The regulator itself is usually what breaks, but because of 'ole Murphy and his law, you may as well replace both while you are in there.

  • @heru-deshet359
    @heru-deshet359 10 ปีที่แล้ว

    Great video! I have a question though. My 2004 driver side went down. I can hear the motor working fine. I know that some broken plastic parts are the culprit as my passenger side broke down last year. Can I repair those parts with strong epoxy glue, or will the stress of it going up and down (which isn't often in my case) cause it to break again sooner? I'm just trying to save the $300 it cost me last time. Thanks.

    • @apdty6639
      @apdty6639 10 ปีที่แล้ว +1

      It may be possible to epoxy it, but we have never attempted that as that is usually a very short term fix.

  • @71scottiemac
    @71scottiemac 11 ปีที่แล้ว

    Got all the way to the regulator, but the window is stuck in the up position. Any advice? Thank you

  • @SwiftXZ
    @SwiftXZ 12 ปีที่แล้ว

    how much would this cost me to have done at the dealership? any idea? just a rough guess would be awesome

  • @1musiclvr
    @1musiclvr 12 ปีที่แล้ว

    I tried this with my 2004 F-150 supercab driver's side window and the Dorman replacement has a different power plug for the motor so it won't work. The Dorman unit has a square plug and the factory regulator has a hole for a round plug to go into.

  • @APDTY
    @APDTY  11 ปีที่แล้ว

    The rear regulator will actually be different, feel free to give us a call and we can help you find the correct part for your truck.

  • @JMarieBeauty1
    @JMarieBeauty1 9 ปีที่แล้ว

    Is this considered a 2 door or 4 door?

  • @timestamptramp6192
    @timestamptramp6192 4 ปีที่แล้ว

    Man this is bothering me, I ordered two regulators from different websites (one after another) and the left side of the assembly never lined up with the door panel holes. The left post is actually too long. Also the cord is too short!! No idea what my options are. I'm not taking it to a stealership, I might take my doors off and have a f150 Rubicon 😂

  • @oigzavala
    @oigzavala 13 ปีที่แล้ว

    gracias por el video estava apunto de pagar 100 bucks for repair jejee thanks for the video am ready to paid 100 dolar only for put on thanks