The main advantage to starving the engine from fuel rather than blocking the exhaust is that you don't end up with a bunch of unburned fuel sitting in the engine. If the engine sits for a while like that the unburned fuel can be corrosive.
One way bearing is going. People use the pincher because when you stick you're finger over the exhaust the fuel returns to engine. The pincher stops that from happening. With the blue wire as long as the light comes on on the wand for it it's working. Also take the glow plug out attach it to the blue wire and turn over the engine with ez start. Also with the tuning on this 3.3 engine the hsn is 4 and a half turns out (stock) and the lsn is flush with the carb :) I had a Revo with starting problems but once I took apart the engine and carb cleaned them both out and replaced parts it worked!! Hope this helps!! :)
One of my favorite engines. The car looks like it has run very little. Don't like that smoke seeping out of the exhaust while trying to start. Good attempt. They really run once everything is set right. I personally make smaller adjustments when I have a fuel flow issue.
Neada a block of wood to sit it on with wheels off the ground , get it running for a fair while before playing with the throttle ,might just nead a good warm up and clear out
I'd say thats possibly not the nitro car you want if your gonna to get into the hobby. Although they are good kits, there's just too much going on there for a beginner.
These will it start videos are so interesting
Thanks :)
The main advantage to starving the engine from fuel rather than blocking the exhaust is that you don't end up with a bunch of unburned fuel sitting in the engine. If the engine sits for a while like that the unburned fuel can be corrosive.
One way bearing is going. People use the pincher because when you stick you're finger over the exhaust the fuel returns to engine. The pincher stops that from happening. With the blue wire as long as the light comes on on the wand for it it's working. Also take the glow plug out attach it to the blue wire and turn over the engine with ez start. Also with the tuning on this 3.3 engine the hsn is 4 and a half turns out (stock) and the lsn is flush with the carb :)
I had a Revo with starting problems but once I took apart the engine and carb cleaned them both out and replaced parts it worked!!
Hope this helps!! :)
You do have some dodgy slang buddy, then backed up by the finest blowing job ever witnessed on TH-cam. Cheers
Dodgy slang haha what did I say?
those traxxas ezstart system look so appealing
Let it run 😆 WOW
Sounded like the one way bearing was slipping.
Yeah, very common... wait until you see tomorrow’s part 2 lol 😂
I LITERALLY THOUGHT THE SAME THING lol
Very informative keep em coming mate 👍
Great video 👍👍
One of my favorite engines. The car looks like it has run very little. Don't like that smoke seeping out of the exhaust while trying to start. Good attempt. They really run once everything is set right. I personally make smaller adjustments when I have a fuel flow issue.
Well this one had terminal engine failure lol.
This will be interesting 👍
See that smoke 😆 it's done
I just bought a used kyosho neo inferno
3.0 for £80 it's looks in good condition haven't run it yet hopefully it's not a basket case 😂
Neada a block of wood to sit it on with wheels off the ground , get it running for a fair while before playing with the throttle ,might just nead a good warm up and clear out
You’ll change your mind after you see tomorrow’s part 2 lol
@@HaggardRC part 2 was unexpected ...
He just need new bearring(s).
Your engine has a bad noise, its your main bearring, and your lsn is leann try to reach it 1.5turn, I.fixed this problem with this, and same fuel.
Nah I gave it back to him, the cod rod was bent.
Can you do a tour of your workshop? I am moving house soon and I will be building a workshop in the garden. I just need some ideas
Well, I haven't really got much just a bench with some mess on it lol.
You have a prob with the ez start gears
That smoke out of the back looks bad😬
Haha!
Sounds like the ezstart seized
lol... just saw my name aaron in the comments and thought someone was talking to me ffs
Hey ulaw 😆
He says hello you lot lol
I'd say thats possibly not the nitro car you want if your gonna to get into the hobby. Although they are good kits, there's just too much going on there for a beginner.
Agreed
Maybe she was a bit lean
Does your have reverse?
It's a 3.3 they are very not well made engines imo I have a 3.3 tmaxx but it's modded with a os 21tm small block in it
Bad move always pull down eng if it has not run now it has no compression
U always want a glow ignitor that ez start wire garbage ez start my ass hard start
A spanner-_- lol
Runs horrible lol