We live in Hawaii, I was watching video and interesting to install stairlift to our townhouse. You have any recommendations how to find company to this type of business . Thank you.
Re my Bruno Elite 2010 straight lift. Made about 2018. I bought it used in good operating condition. The installation instructions show a steel "cross pin" to be installed at the bottom of the rail. The cross pin appears to be for the purpose of taking some weight off the bottom plate which bears all of weight of the gears and chair. The cross pin is to be installed through the rail using a template in a way that prevents the geat set from moving downward. The unit I have does not have such a pin. Any comments as to the importance of the "cross pin"? Also incidentally I could not install the rail per spec because it would have been too far into the landing so I treated the first stair tred as the landing. Of course this requires the passenger to be helped into and out of the chair at the bottom.
I’m buying off market place.. speeding it up.. Putting Led Zeppelin stickers on it.. and of corse like someone already mention a cup holder for my beer.. and the kicker is I don’t really need it… I’m doing it just for fun my wife is gonna love it
You should float the rail off of the ground so your bottom end plate won’t dig into the bottom landing. Also your feet aren’t sitting level on the steps. If you can’t get footplate to clear step nose, use shims and have level feet deeper on the step. We always put our middle feet as close to the joint as possible to prevent separation. Bruno says you can do four steps in between feet.
Not sure what you mean by floating the rail off the floor. The rail is fastened to the steps for support. No need to worry about anything "digging into the landing;" the fixed rail at the bottom of the step is a quarter to a half inch off the floor. The folding rail has as a thick plastic piece at the end to protect the floor from damage.
I have the bruno model sre 300 for some reason the seat will not stay in upright position it just fall down we checked the bolts and they are tightened is there anything i can do on my own that will fix this?Thankyou!
Take the bolts that hold the seat into the hinge. Remove the nylon washers completely and tighten everything back down again with some loctite on the threads
Hello? Did you mention an emergency button?In case the battery stops working for the chair and I stuck on the wall of the chair.Is there an emergency button that will contact my family?Or a fire department or police
There is no emergency button. If someone is living on their own and needs this device, they should have a dedicated "life alert' type emergency call button on their person at all times. The battery charges constantly as long as the switch is turned off on the device.
Yes. But you have to go thru the VA process and they decide if you medically qualify for a stairlift. Then, they decide what manufacturer and dealer will do the work.
Hey!!! ☺️👋 Next week, Friday I actually have a Stair Lyft being installed for my mom here at my home. It’s a company called Ameriglide.. I wish I would’ve known about you guys since I am located in northeast Philadelphia!!! I was just curious to know when it gets to the top of the steps does it swivel?? I think the foot rest safety feature is so awesome because that was a concern of mine especially because I have a senior dig.. Etc. 🥹🙏✨✨ thank you so much!!!
Needs a cup holder for my beer.
We live in Hawaii, I was watching video and interesting to install stairlift to our townhouse. You have any recommendations how to find company to this type of business . Thank you.
Nice video, man.
Re my Bruno Elite 2010 straight lift. Made about 2018. I bought it used in good operating condition. The installation instructions show a steel "cross pin" to be installed at the bottom of the rail. The cross pin appears to be for the purpose of taking some weight off the bottom plate which bears all of weight of the gears and chair. The cross pin is to be installed through the rail using a template in a way that prevents the geat set from moving downward. The unit I have does not have such a pin. Any comments as to the importance of the "cross pin"?
Also incidentally I could not install the rail per spec because it would have been too far into the landing so I treated the first stair tred as the landing. Of course this requires the passenger to be helped into and out of the chair at the bottom.
I’m buying off market place.. speeding it up.. Putting Led Zeppelin stickers on it.. and of corse like someone already mention a cup holder for my beer.. and the kicker is I don’t really need it… I’m doing it just for fun my wife is gonna love it
Can be bought in Durban South Africa?
You should float the rail off of the ground so your bottom end plate won’t dig into the bottom landing. Also your feet aren’t sitting level on the steps. If you can’t get footplate to clear step nose, use shims and have level feet deeper on the step. We always put our middle feet as close to the joint as possible to prevent separation. Bruno says you can do four steps in between feet.
Not sure what you mean by floating the rail off the floor. The rail is fastened to the steps for support. No need to worry about anything "digging into the landing;" the fixed rail at the bottom of the step is a quarter to a half inch off the floor. The folding rail has as a thick plastic piece at the end to protect the floor from damage.
Excellent video!!
What happens when it breaks down after a year. How much is a repair
Do you sell only seats
It's so stunning
How i get stair lift .
Good information. I have one of these with a 9’ rail but need to extend it ~5 feet. Where do I buy an extension rail.
I'd also like to identify a source. Are the extensions modular?
I have the bruno model sre 300 for some reason the seat will not stay in upright position it just fall down we checked the bolts and they are tightened is there anything i can do on my own that will fix this?Thankyou!
Take the bolts that hold the seat into the hinge. Remove the nylon washers completely and tighten everything back down again with some loctite on the threads
Hello?
Did you mention an emergency button?In case the battery stops working for the chair and I stuck on the wall of the chair.Is there an emergency button that will contact my family?Or a fire department or police
There is no emergency button. If someone is living on their own and needs this device, they should have a dedicated "life alert' type emergency call button on their person at all times. The battery charges constantly as long as the switch is turned off on the device.
Great information thank you
How can get from Bangladesh
What is the price?
what if staircase has two sections?
How do you manage this track if staircase have multiple turns in home.
Staircases with turns need a "curved" rail system custom fitted to the particular staircase. Search for pictures of curved staircase stairlifts.
Can you stand and ride ?
No. Stairlifts are made to sit upon.
Any dealer in India
Can the VA provide this🎉lift?
Yes. But you have to go thru the VA process and they decide if you medically qualify for a stairlift. Then, they decide what manufacturer and dealer will do the work.
What's the price
$15,000.00
Too slow
Hey!!! ☺️👋 Next week, Friday I actually have a Stair Lyft being installed for my mom here at my home. It’s a company called Ameriglide.. I wish I would’ve known about you guys since I am located in northeast Philadelphia!!! I was just curious to know when it gets to the top of the steps does it swivel?? I think the foot rest safety feature is so awesome because that was a concern of mine especially because I have a senior dig.. Etc. 🥹🙏✨✨ thank you so much!!!
These videos are a big help, but no one ever answer any questions someone may have concerning the product! Very frustrating!