Nissan Altima ser transmission issues

แชร์
ฝัง
  • เผยแพร่เมื่อ 21 ต.ค. 2024

ความคิดเห็น • 31

  • @kylemag1139
    @kylemag1139 9 หลายเดือนก่อน +1

    Once again I really enjoyed this video! Keep it up!

    • @MoeH83
      @MoeH83  9 หลายเดือนก่อน

      Much appreciated thank you !

  • @brianaguiar913
    @brianaguiar913 3 หลายเดือนก่อน +1

    Try a reset on the window before replacing. Hold the button down until the window is all the way down, and then continue to hold for five seconds, do the same for rolling up but hold the button up.

  • @benjaminwong3618
    @benjaminwong3618 8 หลายเดือนก่อน +2

    Man that car is one of a kind tbh, they only ever made one SER altima model and it's slept on so much, I'm waiting to buy mine soon and turn it into a project car, I'd love to own one, you really don't see much of them on the road at all.

    • @MoeH83
      @MoeH83  8 หลายเดือนก่อน

      Yes its cool car for sure but resale value in the market is not great 🙁

    • @benjaminwong3618
      @benjaminwong3618 8 หลายเดือนก่อน

      @@MoeH83 for sure every month or so a new SER will go on sale on marketplacefor like around 3-6k and always has high miles of course, I'm just waiting to get one soon

    • @MoeH83
      @MoeH83  8 หลายเดือนก่อน

      good luck with yout hunt !@@benjaminwong3618

  • @jimbobvlogz5977
    @jimbobvlogz5977 9 หลายเดือนก่อน +1

    Gotta ask if you’re certain that whining noise is power steering. It could possibly be a transmission whine. When the transmission went in my old civic before I got rid of it, in park it would whine like crazy, a lot louder than your car, but it would quiet down in drive and reverse, almost sounded like this. Trans was shifting poorly and slipping for a long time before it actually quit. From what I can tell it seems like your car shifts okay under acceleration it’s just the rough or jerking downshift we see. Maybe try another drain and fill of transmission fluid, you only get about half or so out with each drain, that might help it. Either way nice car and good video!

    • @MoeH83
      @MoeH83  9 หลายเดือนก่อน

      Hey thank you yah love the red on it … Im pretty certain the noise is power steering because its also leaking when i refill it the noise improves but comes back after it loses the fluid.

  • @kelleyfaulkner3354
    @kelleyfaulkner3354 5 หลายเดือนก่อน +1

    I've got an 06 ser
    Its most likely a bad valve body. Its a common issue with the 5speed autos. I went through 2 of them before i switched to a Level10 valve body. 6 years later, no issues.

    • @MoeH83
      @MoeH83  4 หลายเดือนก่อน

      where did you get the level10 valve body from ?

    • @kelleyfaulkner3354
      @kelleyfaulkner3354 4 หลายเดือนก่อน +3

      @@MoeH83 Darren at Nisformance got it for me and installed it when I upgraded my engine to the 2nd gen DE .

  • @markmullen1852
    @markmullen1852 2 หลายเดือนก่อน +1

    I bought an 05 off the lot in 05. Silver. The 1 and only thing i didnt like was the wheel gap. I sold it in 06 and actually got 1k dollars more than i paid for it. If i wouldve kept it i wouldve put lowering springs on it. Loved that car but needed a truck.

    • @MoeH83
      @MoeH83  2 หลายเดือนก่อน +1

      would love to have gotten a new one

  • @miltonumana7195
    @miltonumana7195 3 หลายเดือนก่อน +1

    Did you ever fix it or plan on selling it?

    • @MoeH83
      @MoeH83  3 หลายเดือนก่อน

      i did not fix it i have been busy with new business i will probably end up selling it

  • @EzioVegaHD
    @EzioVegaHD 9 หลายเดือนก่อน +1

    Its most likely solenoids try replacing camshaft and crankshaft sensors...i bought an o6 maxima last owner replaced transmission twice and the whole time the issue was the crankshaft sensor and yes keep it

    • @MoeH83
      @MoeH83  9 หลายเดือนก่อน

      Did you have a check engine light at all ? I never had a engine light

    • @EzioVegaHD
      @EzioVegaHD 9 หลายเดือนก่อน +1

      @MoeH83 i didn't get a check engine light, but i got it after driving with the issue for about 3 days. Doesn't hurt to replace them 1auto sells quality camshafts sensors and i bought crankshaft from advanced auto ntk brand....after that if it doesn't work try the solenoids and valve body i wish i knew that before getting my other maxima transmission rebuilt

    • @kevinvaughndrives3219
      @kevinvaughndrives3219 2 หลายเดือนก่อน +1

      @@MoeH83 Did you end up keeping it? Def try new nissan cam and/or crank sensors. My auto had hard shift sometimes and ended up being 1 of those sensors.

    • @MoeH83
      @MoeH83  2 หลายเดือนก่อน +1

      @@kevinvaughndrives3219 yes i still have it the problem is reverse when i oil heats up it will not go into reverse anymore.

  • @jonathanberry8255
    @jonathanberry8255 5 หลายเดือนก่อน +1

    Run some seafoam trans tune for a couple hundred miles on it Open your drain pan and change those 3 big solenoids AFTER you change yhe fluid THOROUGHLY and you have to change the fluid 3 or 4 times THEN change the Solenoids! , it will fix it
    I have a Ebony SE-R and a Smoke Grey SE-R

    • @MoeH83
      @MoeH83  4 หลายเดือนก่อน

      i wil have to try it

  • @Jamesisamazig123
    @Jamesisamazig123 9 หลายเดือนก่อน +2

    you youngons worry about the wrong thing that is a bad as car and the only one nissan put there heart and soul in.

  • @EzioVegaHD
    @EzioVegaHD 9 หลายเดือนก่อน +1

    Can you put link to alarm remote please

    • @MoeH83
      @MoeH83  9 หลายเดือนก่อน

      OCPTY 1X Keyless Entry Remote Control Key Fob Transmitter Replacement for Nissan for Sentra for Versa for Frontier for Murano for Pathfinder for Xterra 2002-2016 KBRASTU15 CWTWB1U415 CWTWB1U733 a.co/d/cqWnpVI

  • @Jamesisamazig123
    @Jamesisamazig123 9 หลายเดือนก่อน +1

    i put like 5 grand into my and she is a demon

  • @mon3starb122
    @mon3starb122 8 หลายเดือนก่อน +1

    You just need to reset the window regulator, there is a button on it

    • @MoeH83
      @MoeH83  8 หลายเดือนก่อน

      Already tried that did not work 😕

    • @mon3starb122
      @mon3starb122 8 หลายเดือนก่อน

      @@MoeH83 there is a procedure in doing it , make sure you do it correctly

    • @MoeH83
      @MoeH83  8 หลายเดือนก่อน

      @@mon3starb122 what way do you do it ?