DIY under deck latticework

แชร์
ฝัง
  • เผยแพร่เมื่อ 3 ธ.ค. 2024

ความคิดเห็น • 59

  • @donnalussier6802
    @donnalussier6802 ปีที่แล้ว +2

    Thank you for all the tips and sharing your expertise. Well Done!

  • @raimomaenpaa8974
    @raimomaenpaa8974 2 ปีที่แล้ว +9

    Good job. I would suggest using deck screws to secure the lattice instead of nails because you never know when you might have to remove the lattice panels to perform some work under the deck.

    • @ticklefritz7957
      @ticklefritz7957 2 ปีที่แล้ว

      Would you drill a pilot hole with the screws?

  • @robintodhunter2835
    @robintodhunter2835 ปีที่แล้ว +5

    This was an excellent video! I learned how to do it right! Much better than slapping something up poorly, like the job I have to replace. Thank you!

  • @Fearun9033
    @Fearun9033 3 ปีที่แล้ว +33

    Wear eye protection my friend! My father is an ophthalmologist and he has seen way too many eye injuries. Even deceptively small injuries can leave you blind; don't risk it! Love the content.

    • @wheeldealrepeat3698
      @wheeldealrepeat3698 2 ปีที่แล้ว +6

      Yes, but he had a great safety squint going on!

    • @maureenmusarra2826
      @maureenmusarra2826 ปีที่แล้ว +1

      @@wheeldealrepeat3698 I totally noticed that. lol

    • @yinglemama
      @yinglemama 10 หลายเดือนก่อน +1

      LOL! YOU must be A Liberal aren’t yoy?

    • @CheeseBae
      @CheeseBae 3 หลายเดือนก่อน

      TH-cam is terrible for DIY because no one, not even the pros, follow basic safety protocols.

    • @197jm
      @197jm 6 วันที่ผ่านมา

      ​@@yinglemamalet's own the libs by going blind! That'll show em. Hey, save me some lead paint chips so I can end up like you some day!

  • @marcusaponte1287
    @marcusaponte1287 3 ปีที่แล้ว +1

    Enjoyed the video. Looking forward to watching your next project snd helping hints

  • @rjlinnovations1516
    @rjlinnovations1516 2 ปีที่แล้ว

    Excellent job. It looks great . Thanks for sharing your video. Watching with full support from Canada 🇨🇦.

  • @POOCHIESCLOSET
    @POOCHIESCLOSET 3 ปีที่แล้ว +1

    Thank you for making this video. I'm trying to skirt my deck and your video is easy to follow.

  • @marcusaponte1287
    @marcusaponte1287 3 ปีที่แล้ว +5

    Should the 2x4 on the ground be “treated”?
    Does that matter?

    • @fritzybrothers
      @fritzybrothers 3 ปีที่แล้ว +4

      Yes, any wood outside should be treated and they’re 3 1/2 inch screws.

  • @KeredYo
    @KeredYo 3 ปีที่แล้ว +2

    Thank. Little tips about adjusting lattice like ‘accordion’ helpful. How do you deal with slanted areas near steps? Uneven slope?

    • @scor440
      @scor440 3 ปีที่แล้ว

      Dig a trench

  • @CamerieriZeppoleMix
    @CamerieriZeppoleMix 4 ปีที่แล้ว +4

    Wow 17K VIEWS congratulations!

  • @williamblanton2790
    @williamblanton2790 4 ปีที่แล้ว +12

    I would have liked to have seen the final product with the 1X4s in place.

    • @guy-tn2ud
      @guy-tn2ud 3 ปีที่แล้ว

      That is why I had to give this vid a thumbs down. I thought it had some nice tips, not overdone or over explained. But we need to see the job through t he very end.

    • @agentcorbeau3530
      @agentcorbeau3530 6 หลายเดือนก่อน

      Expension contraction will bump the lattice

    • @williamblanton2790
      @williamblanton2790 6 หลายเดือนก่อน

      This was not me....I live in Korea!

  • @ByHisGraceWeAreSaved
    @ByHisGraceWeAreSaved 3 หลายเดือนก่อน

    This looks like the way I do jobs at home. Make a few stair stringers, go up and fasten some spindles, oooh squirrel, let's do some lattice. Haha! I'm sure you have a method. For me, I just get bored easy. :)

  • @brianwilliams507
    @brianwilliams507 2 ปีที่แล้ว +2

    If you live in a cold climate. You need to leave room for expansion from frost. If your deck footers are below frost line the deck won't move, but that 2x4 frame he installed touching the ground will.

    • @Darling137
      @Darling137 ปีที่แล้ว

      Expand which way?

  • @kmock
    @kmock 2 ปีที่แล้ว

    Is there a reason the lattice on the front are in installed in different directions ?

  • @brandonhorwath6351
    @brandonhorwath6351 3 ปีที่แล้ว +1

    The bottom 2-3 feet of siding is soffit...why!?

  • @stlstg
    @stlstg 3 ปีที่แล้ว +1

    Bruh! You gotta show the finished product with the 1x on the seams.

  • @ibew
    @ibew 3 ปีที่แล้ว

    How crucial is it to staple if you are also framing with studs?

  • @marcusaponte1287
    @marcusaponte1287 3 ปีที่แล้ว

    Are you using 3 inch or 3&1/2 inch screws ?

  • @FLaDave351
    @FLaDave351 3 ปีที่แล้ว

    Do you use stainless steel staples?

  • @garyhasseberg9921
    @garyhasseberg9921 ปีที่แล้ว

    Are you using DeWalt tools, it looks like they are and where did you get a XL battery I guess and if so, about how long does it last

  • @tara8987
    @tara8987 ปีที่แล้ว +2

    I know this is an old video but….dude…you didn’t show the final step

  • @johnparson5719
    @johnparson5719 4 ปีที่แล้ว +2

    Why are you doing this in the rain?

    • @fritzybrothersinc965
      @fritzybrothersinc965  4 ปีที่แล้ว +4

      Because I didn’t want to go all the way back to finish up 2 hours of work. Also, I had to build another the following day. Thanks for watching and thanks for the question. Please subscribe you haven’t already done so John.

    • @MrStonedstickup
      @MrStonedstickup 3 ปีที่แล้ว +2

      Why not ? He won’t have to do it on a nice hot day now lol. Just rain, plus he’s covered

  • @scor440
    @scor440 3 ปีที่แล้ว +3

    FYI watchers screw the top board on from the back so they don’t show and use a 1x6 this technique is over kill

  • @ServantofJesus247
    @ServantofJesus247 4 ปีที่แล้ว +6

    The days of hard working men willing to get their hands dirty and for a fair price are over. I'm a woman and it is so hard to find handyman I tend to do everything myself unfortunately but fortunately.

    • @jimmyraysorrells8415
      @jimmyraysorrells8415 3 ปีที่แล้ว +3

      Its that "for a fair price" bit that's to blame. You see, most people want to lowball skilled workers. And alot of women think they should get work done at cost, just because they're women.. HA! If so, GET A HUSBAND.. if not, pay my wage. This isn't 1950.

    • @ServantofJesus247
      @ServantofJesus247 3 ปีที่แล้ว

      @@jimmyraysorrells8415 i totally agree. My point exactly. If more men married women and STAYED married and were real men around the home ( and vice versa women played their role) I would not need a handyman as much. Times have changed. Men and women are not doing their part as a Team and when both go solo you have women that have to pay people like you tons of money and men ( maybe not you but like you) that have to eat single man sandwiches or find a woman they can shack up with that will do all the wife stuff

    • @ServantofJesus247
      @ServantofJesus247 3 ปีที่แล้ว +1

      @@jimmyraysorrells8415 i totally agree. My point exactly. If more men married women and STAYED married and were real men around the home ( and vice versa women played their role) I would not need a handyman as much. Times have changed. Men and women are not doing their part as a Team and when both go solo you have women that have to pay people like you tons of money and men ( maybe not you but like you) that have to eat single man sandwiches or find a woman they can shack up with that will do all the wife stuff

    • @ServantofJesus247
      @ServantofJesus247 3 ปีที่แล้ว +5

      @@jimmyraysorrells8415 yeah some women want a deal just cuz they are women. That ain't me. And to be fair some men take advantage of women just because they are women so what really is fair? But God sees all of how people treat each other and he will judge the manipulating woman and the man who gets over on women. As a child of God in spite of the way the world is God has taken care of me.

  • @JuanReyes-us4tl
    @JuanReyes-us4tl 4 ปีที่แล้ว

    Good job

  • @bruceontheloose1708
    @bruceontheloose1708 4 ปีที่แล้ว +3

    where your safety glasses cutting . i've had staple come up get my glasses and stick into forehead needing needle nose to pull it out.

  • @BertrandS.
    @BertrandS. 2 ปีที่แล้ว +2

    Who needs safety glasses? :)

  • @debbieboan6827
    @debbieboan6827 ปีที่แล้ว

    Need storage space and door!!!

  • @ilovetotraveltheworld
    @ilovetotraveltheworld 4 ปีที่แล้ว +4

    Production Manager: We can't film today, it's raining.
    Steven: I'm AmeriCAN not AmeriCAN'T...GET ER DONE..!!

  • @arturobarbosa6744
    @arturobarbosa6744 19 วันที่ผ่านมา

    Old School Master!!! Not Drama... Oh No Its Raining .... Can't work.... Learn Kiddos Learn!!!

  • @jaymicortes4019
    @jaymicortes4019 6 หลายเดือนก่อน

    Why cover it

  • @alwaysemanon7787
    @alwaysemanon7787 4 ปีที่แล้ว +1

    No bolts holding those post to the beam supported buy a two x four attached to the post. Even at the building. WoW no bolts holding platform to posts either, must be some real strong glue being used with those nails. Only kidding.

    • @fritzybrothersinc965
      @fritzybrothersinc965  4 ปีที่แล้ว +2

      I can’t give away all my instructions on one video Emanon, I have to save some instructions for another deck. Shhhh!

  • @michaelhoffman1951
    @michaelhoffman1951 9 หลายเดือนก่อน

    Why aren't you wearing safety goggles ?

    • @jimbo6203
      @jimbo6203 6 หลายเดือนก่อน

      Cause he's not a pussy like u

  • @AJDIYNetwork
    @AJDIYNetwork ปีที่แล้ว +1

    Great job with the vid. The deck you’re working on was built horribly.

  • @mikescott8225
    @mikescott8225 2 ปีที่แล้ว +2

    Helpful, but please wear some eye protection. You're setting a lousy example.

  • @fritzybrothers
    @fritzybrothers 3 ปีที่แล้ว +1

    The soffit was on the trailer that I’m connecting the deck to.