Their pro level saws are incredible. The old stuff is all designed and made in Germany and it is obvious when you start getting into them. The designs and choices they made back then were all about providing the best product money could buy. They still make decent stuff, but it doesn't have the same quality feel as the older Zero series, and the newer "greener" engines aren't the same. I don't care about fuel economy and how much cleaner it is. I want a nasty ass big power saw that will drive a 40" bar through rock maple and oak trees and get me home and hour earlier. The newer stuff is like Stihl Light....lol...still leaps and bounds better than the other offerings. If you haven't tried a pro level Stihl machine, you really need to.
"Their scientists were so preoccupied with whether or not they could, they didn't stop to think if they should." And I don't give a damn! Thanks for sharing JB.
Hook up a pulse jet engine. (How???) It's a steady stream of explosions. I have never heard anything as violently loud. No wonder the psychological effects was greater than the explosive in WWII.
@@turnbank3492 Perhaps agentjayz should ride a bicycle home because the engine in his car doesn't produce 10,000 bhp and do the 1000' in less than 4 seconds. apples are apples no matter the size ya know i mean sir?
@@theclubhouse1209 Yeah I repair jet engines for a living and I don't watch him because he comes off as super condescending. Some people never learn how to teach without degrading, which is unfortunate when they really do have a lot of knowledge that might be valuable to people.
If that was a practical thing it would have been done already. These turbines are not new at all. They’ve been around for over 30 years and the turbo shaft and turboprop versions have been around for at least 15.
Love it the mind of the tinkerer, never satisfied with the status quo is always asked the question what if. The bean counters eliminate the R&D department so the corporation can raise the top stock dividends and the companies go out of business because they can't keep innovating. Two Points to STIHL
That was pretty awesome! Novel, but awesome!! Just a nerdy FYI, gas powered chainsaws vibrate on purpose to add a little bite the cutting action, there's a long winded explanation but the bottom line is "Vibration" is a "Good Thing" when it comes to chainsaws :-) Even some electric chainsaws have an eccentric weight ("Vibrator") added to the output shaft to help the chain teeth bite into the wood.
Not to be a smartass, But I have owned an Outdoor power equipment dealership for over 20 years, Sold, and serviced a number of brands over the years. That's the first time I have ever heard that ! Always believed in a sharp chain, and let it do the work ! Never heard of the "vibration" approach before, sorry !
@@quadsman11 I'm a bit skeptical myself. But I have heard a story about single cylinder hillclimb motorcycles beating out their 4 cylinder competitors. The reason why was not revealed until they used a high speed camera. The pulsating of the rear wheel helps it regain traction rather than continue to spin. Regardless, electric is most likely the future of chainsawing, even for pros. It should be possible to build a motor with pulsating power delivery without just adding a vibrating weight to the shaft, if that is found to be necessary.
Got a good hand warmer in the winter. We used to dry our sleeping bags and other gear, along with heating up MREs on the back of the Abrams tanks. Yes, we lit the fire on a turbine engine just to cook food and dry stuff on the exhaust......
Hey Juan ! Have been an outdoor power equipment dealer for over 18 years, and can't tell you how many customers struggle with ethanol gummed up carburetors ! So nothing new here ! But, I have to tell you, I am absolutely fascinated with the turbine powered saw ! Any way to contact this young man !? We are seriously considering an attempt at building our own ! Thanks for the little side show Juan !
@@scottm6188 You can say that again ! Same here ! Have a box full of ethanol damaged carburetors here ! Need to have an ultrasonic cleaner day here ! Probably have close to a hundred carbs here !
@@SmittySmithsonite Trying a fuel treatment in my ultrasonic cleaner ! My mfr. claims it will work ! And gave me 4gals. to prove it ! So, will keep everyone updated !
As a Stihl qualified mechanic and as someone who has built a miniature jet engine for model aircraft at home on my lathe...This saw is awesome, why didn't I think of that! 😀🇦🇺
Runs about like the cheap entry level saws that Stihl unfortunately has to sell. Kid you not, I walked into a family run large hardware chain that features a large Stihl equipment display, asked for the $350 and up range saws to buy right now. They told me I couldn't have one until they started it up in front of me. 15 minutes and 2 saws later, neither worked, and I quietly told them I had to be going now.
Cool! I really think so. But bonus, that test bench is just a one inch tip from a Guinness record setting projectile demonstration. With stronger-than-skin slicing edges! And just to be sure, other Bubba stands about 2 feet away. Well, duh, wouldn't we all?! So Guinness for one ... and, um, "Darwin?" But hey, it's really smooth with no vibration. And Stihl's are impeccably balanced. Never mind then.
Interesting power saw. Chrysler experimented with turbine powered cars in the 1960's? Scrapped most of them; to expensive to make the engines. Also, people complained that it took too long to move off the line once the light turned green. It took several seconds to get going. The people behind them would honk their horns at them.
I remember when Andy Granatelli brought a turbine powered racecar to the Indy 500. He ran it one year. Although it didn't win it was very powerful and they quickly banned it.
When Stihl first came out they were made in Germany. The correct pronunciation is "sh-till" and changed to "Steel" as a marketing ploy when the manufacturing shifted to USA. As a side note it translates to "Quiet" in English, hardly appropriate! One impressive thing about Stihl is they only work with dealers Walmart and Costco need not apply!
I would think air filtration would be a challenge to keep up with the air demands of the jet and not lose performance...fun idea and concept though, maybe a leaf blower and weed wacker model next just to round out the series! This would have been right up Tim Taylor's alley back in the day!
That looked very reasonable. When I saw the title I thought they had built a monster chainsaw with a retired helicopter engine or something like that :-)
The Rover car group actually trialled a road going jet engine car back in the 60/70's here in the UK but never got past that.I think this saw is pretty cool.You can take a turbo charger and with a bit of fettling turn it into a jet engine.Seen it done.
i remember Eli (RIP) of the flyboyz many many years ago strapping a couple of those to a bicycle and running it up and down the runway at Perris Valley Airport. it also took days for the smell to vacate the bar too. miss you Eli, the sport is rather tame without you.
@@sanfranciscobay there was a dude up to Perris doing some video shoot for some show like 'country fried videos' 'that's incredible' (something like that, killed a lot of brain cells since then) doing wingsuit with the jets attached to an old pair of ice skates and Eli was helping out. i knew fritz better and would see him a lot in NY at The Ranch or out in Cali. what those guys could do in the air was jaw dropping.
@@sanfranciscobay the show was called 'Stunt Junkies' Eli got the job after Jeb got busted for an illegal BASE jump. when kids saw Eli, they'd run up to him and ask for a picture and he would treat them better than gold. he was a class act.
"Cuts like a very good running saw but with 4 times the fuel consumption" - AR! AR! I'll take it! Shut up and take my money! But put a 10 feet chain on it!
This is nuts JB. STIHL's a great product but this is like Tim the toolman. 🤓 I wonder if the blade needs sharpening more often? This was interesting. Thanks. Take care and fly safe. 🤟🏼🖖🏼
You definitely would earn that"Number One Dad" T-shirt in front of the neighborhood kids. Also, never have to worry about running out of buddies bringing you free beer!
I'm sold. I'll take two.
Only $45 k each
I think I hear Tim Allen weaving his way through the crowd right now, cash in hand!
screaming "More Power"
To buy cocaine?
*Grunting Intensifies*
He'll wait for the Binford model...
Was about to say, Tim the tool man Taylor would be proud :-)
It's cool that Stihl has a bunch of Gearheads working for them and not just Bean counters.
Stihl is a privately owned company, they are interested in long term investments, not just beans right now!
Their pro level saws are incredible. The old stuff is all designed and made in Germany and it is obvious when you start getting into them. The designs and choices they made back then were all about providing the best product money could buy. They still make decent stuff, but it doesn't have the same quality feel as the older Zero series, and the newer "greener" engines aren't the same. I don't care about fuel economy and how much cleaner it is. I want a nasty ass big power saw that will drive a 40" bar through rock maple and oak trees and get me home and hour earlier. The newer stuff is like Stihl Light....lol...still leaps and bounds better than the other offerings. If you haven't tried a pro level Stihl machine, you really need to.
I wonder how much crossover with KTM?
Build by Andre Prager and Matt Santjer. Andre Prager is well known in the german Classic-Vespa-Szene. He build the Turbo-Vespa (2-Stroke).
"Their scientists were so preoccupied with whether or not they could, they didn't stop to think if they should."
And I don't give a damn!
Thanks for sharing JB.
If chainsaws weren't loud enough as is. We bring you the ear raper 3000.
It's probably really quiet from the other directions, Juan was standing in front of the exhaust where it's loudest.
Trademark that name!
Hook up a pulse jet engine. (How???)
It's a steady stream of explosions.
I have never heard anything as violently loud. No wonder the psychological effects was greater than the explosive in WWII.
This seems quieter than I expected.
Easier for hearing protection to block that high-frequency whine from the turbine compared to the loud buzz from the 2-stroke engine, though...
And it looks professionally done too
That's so cool! I'd love to see it running good and actually cutting into a huge log.
4 times the fuel burn, but 10 times the cool factor and fun!
That's awesome! Love when companies let people make neat things like this for events.
We need AgentJayZ to get that baby in the test cell. Haha
Bahahaha I thought the same
Yes!!
He claimed there not real jet engine's hes to cool for that stuff
@@turnbank3492 Perhaps agentjayz should ride a bicycle home because the engine in his car doesn't produce 10,000 bhp and do the 1000' in less than 4 seconds. apples are apples no matter the size ya know i mean sir?
@@theclubhouse1209 Yeah I repair jet engines for a living and I don't watch him because he comes off as super condescending. Some people never learn how to teach without degrading, which is unfortunate when they really do have a lot of knowledge that might be valuable to people.
FLAMEOUT - how much altitude do you need to attempt a windmill restart?
Wait for the next hurricane? That would almost work in Florida.
Restart procedure:
1. Fling it in the air.
2. Cross fingers and hope.
3. Don't be still standing there when it lands.
Do not attempt unless at least 40 feet up the tree.
That's where the jet powered leaf blower comes in...patent pending.
Burns 4 times as much fuel, makes 4 times as much noise, accelerates 1/4th as quickly.
What’s not to love?
So much more inane than an electric saw with max torque at zero rpm.
How about a spark arrestor? AB?
Completely missed the point. Maybe you should just stick to justine beibler videos and make up tutorials.
@@mikeznel6048 What point did I miss? Was it the pandering to the Reno Air Race Sponsor so he gets invited back?
Bull Palmer and don’t use it in the summertime
Omg that is awesome. I only have 2 stroke Stihl equipment to annoy my neighbours with... Come on Stihl make this a reality.
Wow, frequencies i thought I couldn’t hear any more! 🎧
I didn't hear a thing.
"So does it cut trees down?" "Well, no, BUT THAT'S NOT THE GOD DAMN POINT! IT'S A JET POWERED CHAINSAW!! GET IT? SHEEZE....."
🤣
Its not a saw until we see it throw wood chips.😂
Could use one as an APU during emergencies! 😁
If that was a practical thing it would have been done already. These turbines are not new at all. They’ve been around for over 30 years and the turbo shaft and turboprop versions have been around for at least 15.
@@lucifermorningstar4548 But cheap 3d manufactoring hasnt
I wish youtube had a *JOKE* font...
Going to need a good FOD guard on a chain saw 😂
I was thinking the same thing and will it cut down on the air over the blades?
Just perform regular FOD walks and you should be good 🤞🏻
Torque!!! Torque!!! Torque!!!!. Also, it can be a HEAT generator for very cold areas. Gracias Juan, obrigado!!!!
Love it the mind of the tinkerer, never satisfied with the status quo is always asked the question what if.
The bean counters eliminate the R&D department so the corporation can raise the top stock dividends and the companies go out of business because they can't keep innovating. Two Points to STIHL
Nice, can't wait to hear all my neighbors using one!
Do jet engine lawnmowers too!!
That was pretty awesome! Novel, but awesome!!
Just a nerdy FYI, gas powered chainsaws vibrate on purpose to add a little bite the cutting action, there's a long winded explanation but the bottom line is "Vibration" is a "Good Thing" when it comes to chainsaws :-)
Even some electric chainsaws have an eccentric weight ("Vibrator") added to the output shaft to help the chain teeth bite into the wood.
Learn to sharpen your saw and you won’t need no vibration.
Jet powered vibrator?
@@patdenney7046 what a time to be alive!
Not to be a smartass,
But I have owned an
Outdoor power equipment dealership for over 20 years,
Sold, and serviced a number of brands over the years.
That's the first time I have ever heard that !
Always believed in a sharp chain, and let it do the work !
Never heard of the "vibration" approach before, sorry !
@@quadsman11 I'm a bit skeptical myself. But I have heard a story about single cylinder hillclimb motorcycles beating out their 4 cylinder competitors. The reason why was not revealed until they used a high speed camera. The pulsating of the rear wheel helps it regain traction rather than continue to spin.
Regardless, electric is most likely the future of chainsawing, even for pros. It should be possible to build a motor with pulsating power delivery without just adding a vibrating weight to the shaft, if that is found to be necessary.
New fear unlocked jet powered chainsaw
Oh that is just too freakin COOL!!!!
New meaning to “Hot Saw”!
Tim (the Toolman Taylor) Allen would love this thing.
Got a good hand warmer in the winter. We used to dry our sleeping bags and other gear, along with heating up MREs on the back of the Abrams tanks. Yes, we lit the fire on a turbine engine just to cook food and dry stuff on the exhaust......
Love my Stihl saw, so cool to see them tinkering and making fun toys like this!
Incredibly impractical……I want one! 👍🏻
Only "want"?
I NEED one ;-)
That’s the quality content we have come here for Juan! Thanks!
Juan went and added another future toy to my garage!
Hey Juan !
Have been an outdoor power equipment dealer for over 18 years, and can't tell you how many customers struggle with ethanol gummed up carburetors !
So nothing new here !
But, I have to tell you,
I am absolutely fascinated with the turbine powered saw !
Any way to contact this young man !?
We are seriously considering an attempt at building our own !
Thanks for the little side show Juan !
I love ethanol it makes me lots of money 🤑
If they want to keep running it even after you tell them..it's on them and money in my pocket
@@scottm6188
You can say that again !
Same here !
Have a box full of ethanol damaged carburetors here !
Need to have an ultrasonic cleaner day here !
Probably have close to a hundred carbs here !
@@scottm6188 Yep, same here!
@@SmittySmithsonite
Trying a fuel treatment in my ultrasonic cleaner !
My mfr. claims it will work !
And gave me 4gals. to prove it !
So, will keep everyone updated !
Jet powered chainsaw may be the most American thing ever!
But he's German....this chainsaw is the 131 model (half of a 262)
Works just like every Stihl I've ever ran.
As Tim the Toolman says, Ho Ho Ho Ho Ho....... Awesome Juan. Thanks for showing
That'd go good with my jet powered toothbrush and my jet powered garbage disposal!
But can it cut wood without burning down the woods?
People in 1960:there will be flying cars in 2021
People in 2021: Jet powered chainsaw
Concrete cutting chain saw?
I bet this thing would be really smooth compared to a normal one.
Inappropriate application of jet turbine technology... Priceless!
I'm curious about afterburners.
Soon a guy needs a jet endorsement to use his chain saw!🤣
So how fast do you have to pull the cord to get it started?
As a Stihl qualified mechanic and as someone who has built a miniature jet engine for model aircraft at home on my lathe...This saw is awesome, why didn't I think of that! 😀🇦🇺
Runs about like the cheap entry level saws that Stihl unfortunately has to sell.
Kid you not, I walked into a family run large hardware chain that features a large Stihl equipment display, asked for the $350 and up range saws to buy right now. They told me I couldn't have one until they started it up in front of me. 15 minutes and 2 saws later, neither worked, and I quietly told them I had to be going now.
Cool! I really think so. But bonus, that test bench is just a one inch tip from a Guinness record setting projectile demonstration. With stronger-than-skin slicing edges! And just to be sure, other Bubba stands about 2 feet away. Well, duh, wouldn't we all?!
So Guinness for one ... and, um, "Darwin?"
But hey, it's really smooth with no vibration. And Stihl's are impeccably balanced. Never mind then.
Interesting power saw. Chrysler experimented with turbine powered cars in the 1960's? Scrapped most of them; to expensive to make the engines. Also, people complained that it took too long to move off the line once the light turned green. It took several seconds to get going. The people behind them would honk their horns at them.
The government made Chrysler scrap them or pay 1 million each to keep them in the US. a couple of car museums have them.
I seen drag jet cars that'd beg to differ on the acceleration thing 😁
We bring you the all new stihl 737!
I think I saw a ToolTime episode about this.....
Oh wait that was a lawnmower.... Looks like the world is catching up to Tim Taylor's gadget mind. 😉
"Beware of Jet Blast"
Price means nothing when you have something that cool.
I remember when Andy Granatelli brought a turbine powered racecar to the Indy 500. He ran it one year. Although it didn't win it was very powerful and they quickly banned it.
When Stihl first came out they were made in Germany. The correct pronunciation is "sh-till" and changed to "Steel" as a marketing
ploy when the manufacturing shifted to USA. As a side note it translates to "Quiet" in English, hardly appropriate!
One impressive thing about Stihl is they only work with dealers Walmart and Costco need not apply!
I would think air filtration would be a challenge to keep up with the air demands of the jet and not lose performance...fun idea and concept though, maybe a leaf blower and weed wacker model next just to round out the series! This would have been right up Tim Taylor's alley back in the day!
For the leaf blower - you start with a blower sized tube, get a turbine with a high bypass fan like jets, mount the turbine axially in the tube.
Cutting in style.
Warning: high-pitched noises. Ear protection advised regardless of volume level.
It's ok, after a couple hours you won't have to ever hear that frequency again.
Just what the world needs - a jet powered chainsaw!
Very cool, and extremely dangerous (when, not if, the chain snaps)
I need one of these for the zombie apocalypse
lol sweet! Andrea you are amazing bro!
That looked very reasonable. When I saw the title I thought they had built a monster chainsaw with a retired helicopter engine or something like that :-)
The Rover car group actually trialled a road going jet engine car back in the 60/70's here in the UK but never got past that.I think this saw is pretty cool.You can take a turbo charger and with a bit of fettling turn it into a jet engine.Seen it done.
Super cool. Need one.
I want one. Take my money.
i remember Eli (RIP) of the flyboyz many many years ago strapping a couple of those to a bicycle and running it up and down the runway at Perris Valley Airport. it also took days for the smell to vacate the bar too. miss you Eli, the sport is rather tame without you.
Did Eli attach Turbine Engines to his body while Skydiving or Parachuting?
@@sanfranciscobay there was a dude up to Perris doing some video shoot for some show like 'country fried videos' 'that's incredible' (something like that, killed a lot of brain cells since then) doing wingsuit with the jets attached to an old pair of ice skates and Eli was helping out.
i knew fritz better and would see him a lot in NY at The Ranch or out in Cali. what those guys could do in the air was jaw dropping.
@@sanfranciscobay the show was called 'Stunt Junkies' Eli got the job after Jeb got busted for an illegal BASE jump. when kids saw Eli, they'd run up to him and ask for a picture and he would treat them better than gold. he was a class act.
Somewhere in Hollywood a writer is penning a new Texas Chainsaw Massacre.
"Cuts like a very good running saw but with 4 times the fuel consumption" - AR! AR! I'll take it! Shut up and take my money! But put a 10 feet chain on it!
This is nuts JB. STIHL's a great product but this is like Tim the toolman. 🤓
I wonder if the blade needs sharpening more often?
This was interesting. Thanks.
Take care and fly safe. 🤟🏼🖖🏼
Man I just bought a MS500i and now I'm gonna need this lol
I want one!!!!!!🤣
"Sorry dad, the chainsaw had a hot start, so I can't work in the yard today!"
That is GREAT!! How did I miss this one??
Probably using a model heli gearbox. Neat idea.
😂😂😂 this is the future version of the " Texas Chainsaw Massacre"...
The hardness of my broner cannot be measured on the Rockwell scale. 💍
The body already looks very similar to a bell Ranger Helicopter so yes seems like a natural progression
Outside the box thinking is how things get done!
This is what youtube was made for! Sorry I only have two thumbs to give you!🤣👍👍
I’d hate to be anywhere around that beast when the chain is at full speed 😳
....wow!!!...i sure cant wait to be up in a tree with that!!!
How's the wind today? Are we going to see some racing?
That's just hilarious 👍😆
i can hear tim allen grunting in the background.
lol, can't see that being let out into our drought plagued forests.... but it sounds really cool!
It doesn't matter if it has the torque, it " out Cools" all others. Stihls are just plain hard to beat.
Husqvarna. Especially in the cold. Stihls don't like the cold.
stihl’s are hard to start, hard to keep running, and even harder to get rid of. Husqvarna if you want to “git er done”
Can't wait for jet powered lawnmower although I was given a mower that reveals that fast I thought it was going to fly away
Gloves and earplugs.
and fire suit
You definitely would earn that"Number One Dad" T-shirt in front of the neighborhood kids. Also, never have to worry about running out of buddies bringing you free beer!
All fun and games until the chain starts flying, like literally.
Awesome
BAD ASS, checks in the mail.
Very cool.. dont see it being very efficient in real world conditions though.
The Turbo Jack!
Does is come with inflight refuling? Thank you for making these videos!
Wow how cool thanks Juan stay well and keep flying high!
Hey, no more ladders! You can just jet propel your way up into the tree, and cut with abandon!
No more climbing either!
Only the 2nd or 3rd video in the world of this thing I feel like. Only remember seeing it once before at a chainsaw demo. Insane.
I'm sure Swedish Husqvarna is working on a scaled down version of Saab J39 Gripen's engine.
it's all fun and games until the chainsaw takes off
The balls of Stihl.
What a bitchin way to use a ton of fuel, make a ton of noise, and possibly hurt yourself. Sounds similar to a day of boating 🇺🇸🍻