Hi thanks for the amazing content on your channel. I have taken my gopro 9 apart but in the process the ribbon cable came out of the lens and i can't seem to figure out how to get it back in a small black strip came out at the same time . Any tips. Thanks ian
When i was taking my GP9 apart, i actually didn't use a saw, iv just took some razor blade knife and slowly slide it on the back where screen is glued to
I am getting a GREEN light not a BLUE, with a ‘not enough power’”. I read that there is a GoPro labs update with the QR code obviously and it can be done if you connect the original battery only? Can you maybe if possible if you’re super kind to make it to where I can put the battery back on and I can, or we can figure this out of the whole? Did you do that QR code before ?
You can add conformal coating on the boards also as now it is not waterproof + have a fan when being used to capture waterfall or something related to water and moisture. Now you got the perfect naked camera for everything.
a few tips: in the manual they use heatsinks on more chips. also when applying the board to the case it seems that the heatsink is to thin compared to the board, it doesnt touch the case.
20:57 You are so true when you decided to take the shiny frame part behind the screen. This is because GoPro 11 utilizes LCD screen, not OLED. LCD has backlights, where you see the white back part of the screen. It actually translucent when the LCD is turned on. The lights will be reflected through the back and bounced back to the shiny frame part behind it thus increase the brightness and make the screen looks nicer. Same concept as LCD in laptops where they paste an Aluminium Sticker sheet on the screen assembly. 😊 nice job!
Don't know if you saw, but they have a case for the 12 now too. I don't think the internals differ from the 11 but the 12 has HDR which is huge in my real estate experience
Thank you so much again for this detailed video! I was afraid to do it myself but after I've seen your very nice explanation, I've decided to give it a try. It worked very well. I had a slight moment of sweat when was not initially turning on but it turned out that the ribbon cable provided in the kit is a bit too big and one of the connector popped out when I put the case togheter. I've added some tape to prevent from happening.
This is such an excellent tutorial mate! Naked GoPros are a must have for cinewhoops and smaller quads. It's an expensive process making one, so thank you for such a detailed instructional video. I've been on the edge of doing this and you've just made it so much clearer and an easier DIY. 🙏👌
hey! thansk a ton! this helped me a lot during the proces. however your suggestion about running gopro labs is a MUST and necessary. i didn't do it as i thought i would not use it. but i had the same issue as someone down in the comments. an error after the whole assembly: battery to low.. so i had to get the battery case/battery side button and screen back on to flash gopro labs on it.. so maybe you could add a note in the video that states its necessary.. either way thanks for the video!
24:19 Guys, if want to replicate this, you can wipe the LCD first with the cloth provided. You don't want fingerprints on the screen that could be visible and can't be removed anymore after you attach the glass panel on top of it
I was curious about the REC pad that on the back, in the top of GND & BAT pad 35:42 . . . I think every naked gopro MODs have it, but the bones version doesn't. can I use the pad to control the gopro to take a picture in certain interval ?
I have the GEPRC naked 11 and love it. I wish there was a better way to manage it remotely from my phone. I'm under impression that we can't upgrade the firmware, so the new app doesn't connect and preview video feed. Any info on this?
Just made my first naked gopro11 with your video. Superb! The only issue I have is that hyper smooth is not working, And also gyro data is not recorded. I tested that in Gyroflow and realsteady. Do you recognise this? Any possible causes? Thanks
I followed this video and the go pro works but they footage is very low quality with black bands and waves. Are there any settings in camera I should change?
Make sure you have 10-bit turned on. Also, if you’re seeing black banding it probably means your refresh rate is off. Under settings play with 50hz and 60hz and see if it makes a differemce
I'm getting a low power warning on the front screen on the GP10, the record button also doesn't work for video/photo/timelapse using the button or the app. Any suggestions?
Very interesting video. So the original USB socket has two cables? Below the lower cable are nine holes in the case, three by three. Why? Is this something like pressure equalization or cooling?
Great video!! Omg lol I was like on the edge of my seat the whole time. I just got the GoPro hero 11 black about a year ago...still can't see cutting it aaaah. So, my question is how much do you lose making a naked GoPro?
Awesome tutorial, well explained and very clear voice 👍🏻👏🏻👏🏻👏🏻 I'm planing to do a naked GoPro 11 Cam & the case from GepRC, is very Cool. CNC make in aluminium..very clever design. Thank you for sharing this info with us and keep the good stuff coming.. Bye !! 👍🏻👍🏻👍🏻
hi there, I recently assembled a Naked GoPro Hero 11 using GEPRC's Naked GoPro kit. Initially, it worked fine, but on the second day, the camera stopped recording and the live feed disappeared. Could you help diagnose the issue? I'm concerned the camera module might have stopped working. Any guidance or solutions would be appreciated.
I followed all the directions in your vid (awesome job btw) but for some reason my go pro flashed green lights and won’t record? Would you have any insight as to why that is?
I have a lot of trouble with image disturbances on the videos from the Flywoo Gopro 11. All 6S quads cause image disturbances due to the voltage peaks. Flywoo says I should connect another BEC between Lipo and Gopro. Very annoying!
UPDATE below - I'm getting a low power warning on the front screen on the GP11 and then it shuts down after 2 minutes of running. I'm running it from a fully charged 6s lipo. Any suggestions?
If you have GPlabs installed... go into the more options and select the "TUSB" and enable it... if that doesn't work wire it to an external 5v 2.5a bec
Thank you for this video, very detailed and very well explained. I am going to attempt to do one soon. Question though: after it has been stripped does it still have WiFi or Bluetooth? I am asking if I can still connect it to my phone or all the settings needs to be changed via GoPro Labs?
The GoPro still has WiFi/BT connectivity so you can adjust settings and see cam preview through the GoPro app. Range is limited because of the CNC case but if your phone is close it works fine. Just make sure you connect your phone to the app before disassembling 👍
Hey mate, thank you so much for the GepRc naked GoPro video! It really helped a lot. But now when I try to power it on it says it doesn´t have enough power and I can´t record anything :/ Do you know how to fix that? Thank you very much
@@TRONCATFPV Already solved it ty. Didn´t install the Labs Firmware beforehand. Had to rebuild the GoPro (battery + case, power-button, display) and flash Labs. After I showed the TUSB QR-Code to the GoPro it accepted the power.
just on the part where you remove the screen at 20:19 could you not leave the screen in place, and just pop it out in the bracket. saves removing it and and then putting it back in no?
Hi Thank you for the great video again. What is the best way to set up the settings for a naked gopro? Without back screen Is it possible to share what are your preferred settings for real estate shooting? Thank you a lot in advance :)
Full sized GoPro 11 weighs 127g, naked GP11 is only 46. so you save about 80g Front Screen only weighs a couple grams and imo is worth it to have. quick way to make sure you're in the right preset 👍
@@TRONCATFPV thank you for your reply. Did you buy the GepRC kit for $83? I found cheaper kits from nylon material and have to cut the plate as you stated. Is a $50 difference. What would you recommend?
@@dumitrumalai4114 I think the GEPRC case is the best available. I had a namelessRC & Flywoo one but the quality/durability just wasn't there. I've crashed with the GEPRC case a few times now and the GoPro holds up great. IMO the $50 difference is worth it.
Thanks for the tutorial. Worked well. But is it right that I can now no longer record videos with sound? Or did I do something wrong during assembly? Thank you!
@@Spartan3999 yes It's when you cut that black tape at the camera ribbon cable. We simply shouldn't have cut it. For me when i press on the cam ribbon cable slightly the picture comes back. Ended up ordering a new cam ribbon cable
You and me both, in the last couple months I’ve had to replace two and currently have another one sitting on my desk I have to send back. I really wish someone would come out with a naked case for the 11 mini. I’ve reached out to flywoo/GEPRC and from what I’ve been told it’s not possible. I don’t completely buy it. I’ve contemplated taking one apart just to see what the internals look like. If anything comes out for a “naked 11 mini” I’ll be all over it and will have a video on it 🤙
Thank you really much for your video, you helped me a lot to naked my Go10. Video explained really well. Just a question for me, do you have any Stl file for case to share for GoPro10 just to mount into my drone. Thanks 🙏
How can i update the camera because when I tried to update it on the app i couldn't because of the battery low problem, did you update your gopro already?
hello, thanks for the video. I have done the exact same things but when in plug te camera to the balance plug of my lipo there is a message in which there is written : "insufficient charge" (actually in Italian). can you help me to solve this problem?
Thanks for your video. I did everything like you. But I have a big problem the go pro turns on but on the front screen I don’t see any picture. And if I press the record button nothing happens. Any idea how I can solve the problem? Maybe the BEC or the FPC cable is damaged? I hope the lens is not broken. I need help 😢
What do you do to reconnect if it gets disconnected from your phone? I had it paired, then installed gopro labs and forgot to repair it before dismantling. 😅
to re-pair it with your phone you just need the back screen connected which is thankfully pretty easy. I just upgraded my phone recently and had to do this too.
@@TRONCATFPV Thanks dude, I saw something that said to reconnect everything.. Also, Geprc recommends installing the older 1.16 gopro labs firmware to prevent incorrect voltage display. Does this matter? I'm wondering if it will cause the gp to shut off from voltage sags.
Hi thanks for the amazing content on your channel.
I have taken my gopro 9 apart but in the process the ribbon cable came out of the lens and i can't seem to figure out how to get it back in a small black strip came out at the same time . Any tips. Thanks ian
When i was taking my GP9 apart, i actually didn't use a saw, iv just took some razor blade knife and slowly slide it on the back where screen is glued to
Did u heat it?
@@KevinDoherty No not really , slowly sliding on the glue , same with my gp11 same technique
I am getting a GREEN light not a BLUE, with a ‘not enough power’”. I read that there is a GoPro labs update with the QR code obviously and it can be done if you connect the original battery only? Can you maybe if possible if you’re super kind to make it to where I can put the battery back on and I can, or we can figure this out of the whole? Did you do that QR code before ?
You can add conformal coating on the boards also as now it is not waterproof + have a fan when being used to capture waterfall or something related to water and moisture. Now you got the perfect naked camera for everything.
I just built my gopro 12 today and this tutorial was perfect. Thanks so much for a detailed tutorial!!
a few tips: in the manual they use heatsinks on more chips. also when applying the board to the case it seems that the heatsink is to thin compared to the board, it doesnt touch the case.
its a thermal pad not a heatsink, you can buy differen size and thickness if you want to get a perfect fit, Thermal Arctic has nice thermal pads
20:57 You are so true when you decided to take the shiny frame part behind the screen. This is because GoPro 11 utilizes LCD screen, not OLED. LCD has backlights, where you see the white back part of the screen. It actually translucent when the LCD is turned on. The lights will be reflected through the back and bounced back to the shiny frame part behind it thus increase the brightness and make the screen looks nicer. Same concept as LCD in laptops where they paste an Aluminium Sticker sheet on the screen assembly. 😊 nice job!
Don't know if you saw, but they have a case for the 12 now too. I don't think the internals differ from the 11 but the 12 has HDR which is huge in my real estate experience
Internals should be the same layout 🤙
I could deff see how the HDR makes it better for interior window pulls and a more even exposure.
I’m having the issue of a GREEN light , not BLUE with a error of ‘not enough power”
You’ll have to install the latest version of GoPro labs installed to bypass this
Thank you so much again for this detailed video! I was afraid to do it myself but after I've seen your very nice explanation, I've decided to give it a try. It worked very well. I had a slight moment of sweat when was not initially turning on but it turned out that the ribbon cable provided in the kit is a bit too big and one of the connector popped out when I put the case togheter. I've added some tape to prevent from happening.
This is such an excellent tutorial mate! Naked GoPros are a must have for cinewhoops and smaller quads. It's an expensive process making one, so thank you for such a detailed instructional video. I've been on the edge of doing this and you've just made it so much clearer and an easier DIY. 🙏👌
does it take ND's?
Just followed your video to complete my first naked GoPro. Thanks, turned out great. 👍
It is the same process for the go pro 10 since it is the one I have available at the moment, I already have the geprc 10 case thanks four your aport
Yes the process is the same for the GP9,10 & 11 🤙
@@TRONCATFPV thans sr good content
hey! thansk a ton! this helped me a lot during the proces. however your suggestion about running gopro labs is a MUST and necessary. i didn't do it as i thought i would not use it. but i had the same issue as someone down in the comments. an error after the whole assembly: battery to low.. so i had to get the battery case/battery side button and screen back on to flash gopro labs on it.. so maybe you could add a note in the video that states its necessary.. either way thanks for the video!
anyone know the interface that gopro is using at the front facing screen? is it MIPI?
24:19 Guys, if want to replicate this, you can wipe the LCD first with the cloth provided. You don't want fingerprints on the screen that could be visible and can't be removed anymore after you attach the glass panel on top of it
I was curious about the REC pad that on the back, in the top of GND & BAT pad 35:42 . . .
I think every naked gopro MODs have it, but the bones version doesn't.
can I use the pad to control the gopro to take a picture in certain interval ?
thank you for the tutorial, have you seen the kit by Kona FPV, you can use normal lense mounts (so good for all the different branded ND filters)
I have the GEPRC naked 11 and love it. I wish there was a better way to manage it remotely from my phone. I'm under impression that we can't upgrade the firmware, so the new app doesn't connect and preview video feed. Any info on this?
Just made my first naked gopro11 with your video. Superb! The only issue I have is that hyper smooth is not working, And also gyro data is not recorded. I tested that in Gyroflow and realsteady. Do you recognise this? Any possible causes? Thanks
following this guide makes it just a breeze to finish. amazing walkthrough!! thanks!!
does he fly in angle mode indoors?
you have the link to the 3D print case for de GEPRC Case? Thank you really nice video
I followed this video and the go pro works but they footage is very low quality with black bands and waves. Are there any settings in camera I should change?
Make sure you have 10-bit turned on. Also, if you’re seeing black banding it probably means your refresh rate is off.
Under settings play with 50hz and 60hz and see if it makes a differemce
I'm getting a low power warning on the front screen on the GP10, the record button also doesn't work for video/photo/timelapse using the button or the app. Any suggestions?
Good day sir… I did followed all your steps all great but only one problem pops out (not enough power) and I can’t record video
Would love to see a video of you talking about the actual rates you like to use and why when shooting things like real estate video!
Rates were covered in my cinewhoop build video 😉
18:10 that's not a heat sink, that's TIM (Thermal Interface Material).
Amazing video! Just got mine all set up and ready to go! Anyway you could share your GoPro video setting?
Great informational vid. Wish they'd make one for the 11 Mini.
agreed 100%
Hoping GEPRC or Flywoo will come out with one!
You urrdy know I'll have a video on it if they do 👍
Very interesting video. So the original USB socket has two cables? Below the lower cable are nine holes in the case, three by three. Why? Is this something like pressure equalization or cooling?
Prefect timing, my cinelog 20 is due and my experience of the 03 camera is poor in darkly lit areas, need a GP11
Excellent tutorial, thank you!! Just finished my own build and couldn't have done it without a video like this. Was a hell of a struggle still 😅
hello, do you have audio on your go pro naked fotage? or it will no audio?
@@arnoegp no audio, mic got removed
Thanks for the video. You can use a stanley knife instead of a saw - can be easier and most people have one.
great video, there isnt a naked gopro 11 mini, is this something you could possible look at please
Great video!! Omg lol I was like on the edge of my seat the whole time. I just got the GoPro hero 11 black about a year ago...still can't see cutting it aaaah. So, my question is how much do you lose making a naked GoPro?
Awesome tutorial, well explained and very clear voice 👍🏻👏🏻👏🏻👏🏻
I'm planing to do a naked GoPro 11 Cam & the case from GepRC, is very Cool. CNC make in aluminium..very clever design.
Thank you for sharing this info with us and keep the good stuff coming..
Bye !! 👍🏻👍🏻👍🏻
what is the weight of that?
hi there,
I recently assembled a Naked GoPro Hero 11 using GEPRC's Naked GoPro kit. Initially, it worked fine, but on the second day, the camera stopped recording and the live feed disappeared.
Could you help diagnose the issue? I'm concerned the camera module might have stopped working. Any guidance or solutions would be appreciated.
excellent tutorial. Thanks. Could you share the flywoo video assembly please?
I saved some of the footage for this video, otherwise everything else was deleted since I decided to use the GEPRC case instead.
Can the naked gopro 11 be waterproofed with a Kotking or similar product to make it waterproof?
I followed all the directions in your vid (awesome job btw) but for some reason my go pro flashed green lights and won’t record? Would you have any insight as to why that is?
I have a lot of trouble with image disturbances on the videos from the Flywoo Gopro 11. All 6S quads cause image disturbances due to the voltage peaks. Flywoo says I should connect another BEC between Lipo and Gopro. Very annoying!
Thanks a lot to making this tutorial video, really helps a lot to build my naked gopro
thank's for the vid, is the hd recording on board useable while on fpv?
I have seen enough of this to know, that I really don't want to do that if I can avoid it. Great video though!
Thank you very much! Also my fan seems to be pretty loud, any ideas? It is starting silent and then go full crazy
Can you change the lens cap for a new one in case you break it?
lol at the saw and gloves
At 9:04 he says that the third cable can be cut, isn't it a temperature sensor?
Assuming this also helps or even eliminates the overheating issues with GOPROs?
yes, the fan in the back prevents any overheating. Been filming 5K 30 with this setup with no issues 👍
vertical mount for this camera?
UPDATE below - I'm getting a low power warning on the front screen on the GP11 and then it shuts down after 2 minutes of running. I'm running it from a fully charged 6s lipo. Any suggestions?
If you have GPlabs installed... go into the more options and select the "TUSB" and enable it... if that doesn't work wire it to an external 5v 2.5a bec
I have experienced the same problem did you solve the problem?
@@Tekinkus_fpv yes you have to the latest version of GoPro Labs flashed. I ended up hooking the old battery backup to the board then flashed it.
@@matthewparsons7889 so I just have to plug in the battery and flash the latest version of GoPro labs. Right?
@@matthewparsons7889 thanks dude I solved that
Will the go pro 12 breakdown be very similar?
yes, it should be exactly the same
tenho uma dúvida, até que voltagem a gorpro aguenta?
Jovem, pergunta em inglês que é mais facil te responderem.
Thanks! Super helpful!
Thank you for this video, very detailed and very well explained. I am going to attempt to do one soon. Question though: after it has been stripped does it still have WiFi or Bluetooth? I am asking if I can still connect it to my phone or all the settings needs to be changed via GoPro Labs?
The GoPro still has WiFi/BT connectivity so you can adjust settings and see cam preview through the GoPro app. Range is limited because of the CNC case but if your phone is close it works fine.
Just make sure you connect your phone to the app before disassembling 👍
@@TRONCATFPV Thank you so much for this information. I’ll start the operation this weekend
Just wondering, if i have a flywoo naked gp, can i just convert it to geprc case?
Yessir!
Currently i'm using a GP 8 naked. But if I wanted to use the 11 naked then I need to change all the plugs? 😮
I need to clean the lense of mine, is it possible to remove the lens and reattach?
Здравствуйте, а если попадет под дождь, что будет ?
whats the weight of this whole setup
Will the hero 9 fit in the GEPRC Naked 11 case (compatible with all the the GEPRC parts)?
hero 9, 10, 11, and 12 will have the same procedure & parts 🙌
Superb tutorial! How long do you think it took you from start to finish?
Do you think it’s a must to add a fan to the GoPro 10 naked ?
I’ve had issues with the GP10 overheating when filming in 5k.
From what I remember, it was able to handle 4k without a fan though.
@@TRONCATFPV Thank you for that info brother, great video!
do you recommend a 2.5 inch or 3 inch for home real-estate, i haven't found a BNF 2.5 inch dji 03 with 6s yes except your build.
Can you not change the settings of the go pro using the gopro app?
you can adjust the settings through the app 👍
thank u so much i made it toady but im totaly noob in electronics :D i destroy just buzzer bcs dont see how u delet this. thx again
I am succesfully make naked hero 10, thank for your tutorial, but why I dont hear any sound on my footage? did I miss something?
Does this case have enough space for the microphone stripped from a gopro?
I would be very grateful for an answer to this question TRONCAT FPV :)
Hey mate, thank you so much for the GepRc naked GoPro video! It really helped a lot.
But now when I try to power it on it says it doesn´t have enough power and I can´t record anything :/
Do you know how to fix that?
Thank you very much
Very interesting, I wonder if its a fault in the BEC. Have you reached out to GEPRC?
What firmware are you running on the GoPro?
@@TRONCATFPV
Already solved it ty.
Didn´t install the Labs Firmware beforehand.
Had to rebuild the GoPro (battery + case, power-button, display) and flash Labs.
After I showed the TUSB QR-Code to the GoPro it accepted the power.
What cord is used to plug into the GoPro from drone? JST?
I just order the case of GEPRC Hero 11. I am wondering how can i update any firmware to my gopro 11 in the future after i tear it down ?
thanks
Can I fit a GoPro 11 inside the kit for the GoPro 10 or are they truly model specific???
I found out from GEPRC that the GoPro 11 will fit inside the naked 10 kit. I followed this video and it worked perfectly!
With the Geprc case is that lense protector compatible with other nd filters
what when i lost my phone or something? is that cam then not adjustable in settings no more?
You’ll have to re-attach the rear screen and reconnect via Bluetooth with your new phone
just on the part where you remove the screen at 20:19 could you not leave the screen in place, and just pop it out in the bracket. saves removing it and and then putting it back in no?
Hi
Thank you for the great video again.
What is the best way to set up the settings for a naked gopro? Without back screen
Is it possible to share what are your preferred settings for real estate shooting?
Thank you a lot in advance :)
I bought my own cover for 9. Does it go with 11?
Thank you! I've been considering the GEPRC case. Great to see a full tutorial. 👍
How much weight did you save?
Also, why use the front screen, Isn’t that extra weight without a real useful purpose?
Full sized GoPro 11 weighs 127g, naked GP11 is only 46. so you save about 80g
Front Screen only weighs a couple grams and imo is worth it to have. quick way to make sure you're in the right preset 👍
@@TRONCATFPV thank you for your reply. Did you buy the GepRC kit for $83? I found cheaper kits from nylon material and have to cut the plate as you stated. Is a $50 difference. What would you recommend?
@@dumitrumalai4114 I think the GEPRC case is the best available. I had a namelessRC & Flywoo one but the quality/durability just wasn't there.
I've crashed with the GEPRC case a few times now and the GoPro holds up great. IMO the $50 difference is worth it.
Thanks for the tutorial. Worked well. But is it right that I can now no longer record videos with sound? Or did I do something wrong during assembly? Thank you!
when disassembling the case the speaker is removed. I know the Flywoo case keeps the microphone though
@@TRONCATFPV I put the microphone from the GoPro 11 into the geprc case. It works good. But you can hear the fan
Followed your video but my screen stays black. Any idea why? Checked the ribbon cable of the lens and it seems to stay in place
did you figure this out I am getting same isue?
@@Spartan3999 yes It's when you cut that black tape at the camera ribbon cable. We simply shouldn't have cut it. For me when i press on the cam ribbon cable slightly the picture comes back. Ended up ordering a new cam ribbon cable
Can you tell me how to connect with the Quick app? My naked 9 won't scan the code
Thank you so much, this was easy to follow. Took an afternoon but so worth it for this little cam.
Im on my 3rd replacement of the 11mini. Is it possible to have it naked u think and what is the cost please
You and me both, in the last couple months I’ve had to replace two and currently have another one sitting on my desk I have to send back.
I really wish someone would come out with a naked case for the 11 mini. I’ve reached out to flywoo/GEPRC and from what I’ve been told it’s not possible.
I don’t completely buy it.
I’ve contemplated taking one apart just to see what the internals look like.
If anything comes out for a “naked 11 mini” I’ll be all over it and will have a video on it 🤙
@@TRONCATFPV thx 4 ur answer bud . Enjoy flyin
Is there any tpu case for it available, i can't find one
Who’s done this with the GP12 yet? I think Benoit Finck did, but hard to see what all he did on his instagram reel lol
GP12 should be the exact same procedure 👍
Thank you really much for your video, you helped me a lot to naked my Go10. Video explained really well. Just a question for me, do you have any Stl file for case to share for GoPro10 just to mount into my drone. Thanks 🙏
Nice, we use this GepRC Cases as well. They're great.
Nice Video and credits to GepRC. They build a case I ever wanted.
No Antenna?
How can i update the camera because when I tried to update it on the app i couldn't because of the battery low problem, did you update your gopro already?
I just followed this video and decases my GoPro 11 into the George Rc case, but now I’m stuck with “not enough power”
Cutting a GoPro with a hacksaw: tough, but fair.
Do you have a Tpu mount made for this yet ? Looking everywhere and can’t find any for sale. GoPro mount compatible Thanks !
This is the one I used: www.thingiverse.com/thing:5376393
Does this work with the 12?
Are you still able to connect to your gopro via WiFi? I've seen others solder a 31mm piece of wire for a WiFi antenna.
yessir, I haven't had any issues connecting to WiFi with this case.
the nd filter cant fit in the lens can u know something is bigger the nd that the lens gopro 11 geprc parts
hello, thanks for the video. I have done the exact same things but when in plug te camera to the balance plug of my lipo there is a message in which there is written : "insufficient charge" (actually in Italian). can you help me to solve this problem?
any idea where to purchase spare ND's for this case?
Thanks for your video. I did everything like you. But I have a big problem the go pro turns on but on the front screen I don’t see any picture. And if I press the record button nothing happens. Any idea how I can solve the problem?
Maybe the BEC or the FPC cable is damaged?
I hope the lens is not broken.
I need help 😢
Did you solve this problem?
did you fix this?
What do you do to reconnect if it gets disconnected from your phone? I had it paired, then installed gopro labs and forgot to repair it before dismantling. 😅
to re-pair it with your phone you just need the back screen connected which is thankfully pretty easy.
I just upgraded my phone recently and had to do this too.
@@TRONCATFPV Thanks dude, I saw something that said to reconnect everything.. Also, Geprc recommends installing the older 1.16 gopro labs firmware to prevent incorrect voltage display. Does this matter? I'm wondering if it will cause the gp to shut off from voltage sags.
@@TRONCATFPVcan u please share how u did the reconnection of screen and the re-pairing?