MINI TRUCK GETS SOME BIG CHANGES!! PT2

แชร์
ฝัง
  • เผยแพร่เมื่อ 29 ต.ค. 2024

ความคิดเห็น • 146

  • @HODGEPODGEDODGEGARAGE
    @HODGEPODGEDODGEGARAGE 2 ปีที่แล้ว +12

    *Fantastic* work J.C! 🙂👍 I really like how you're making it a dump bed. That's gunna be extremely handy! The wheels and tires look great as well. Take care and be safe 🔧🔩

  • @willb3018
    @willb3018 2 ปีที่แล้ว +5

    Goldielocks tire and wheel combo. Just right. Loving that addition of the dump bed & hitch with the usual well thought out design and quality build.

  • @The101Point1
    @The101Point1 2 ปีที่แล้ว

    Everyone in the end likes that stance with some wheel poke and some wheels with a lip. 👍

  • @sideview79
    @sideview79 2 ปีที่แล้ว +6

    The wheel/tire combo looks great and combined with the dump bed just makes it so much more useable and versatile ! Great video...can't wait to see it finished 👍👍

    • @j.c.smithprojects
      @j.c.smithprojects  2 ปีที่แล้ว +4

      im going to keep going until it is finished. at least this phase. it may have some really big changes coming,

  • @donaldcampbell5277
    @donaldcampbell5277 2 ปีที่แล้ว +1

    I think the Mrs. is going to want to drive her lil truck to town and show it off. Looks great.

  • @ephjay6t87
    @ephjay6t87 ปีที่แล้ว

    I'm jelly of the flairs. FYI:. Beds are the same width as 80's Toyota's 😉

  • @BERTRAND85O
    @BERTRAND85O ปีที่แล้ว

    Great video! Just picked me up a 1997 minicab! Having some issues with it turning off after running about 10 minutes. Replace the fuel pump, and spark plugs. And it’s still not staying running for longer than 10 minutes.

    • @j.c.smithprojects
      @j.c.smithprojects  ปีที่แล้ว

      you need to figure out if the ignition is shutting off or if the fuel is boiling and vapor locking. when it shuts off, check for spark immediately. also look down the carb and give it full throttle a few times. you should see fuel spraying.

    • @BERTRAND85O
      @BERTRAND85O ปีที่แล้ว

      @@j.c.smithprojectsI’m gonna check spark today. For some reason it’s not starting today

  • @richardhoneywell7411
    @richardhoneywell7411 2 ปีที่แล้ว +1

    Very nice wheel and tire up grade. Building a dump bed is a great idea . Since you have the majority of part's and knowledge to convert it. Really looking forward to the next video on this little project truck stay safe J.C.

  • @kwshilts
    @kwshilts 2 ปีที่แล้ว

    Another over-engineered heavy-duty remastered project. This is why I watch your videos.

  • @SC-hb8vs
    @SC-hb8vs 2 ปีที่แล้ว

    Great detail on the MitsubiSHE!

  • @wayneedwards249
    @wayneedwards249 2 ปีที่แล้ว +1

    Can't wait to see it when you are done with it. Keep up the great work.

    • @j.c.smithprojects
      @j.c.smithprojects  2 ปีที่แล้ว

      i have all kinds of ideas...."some a good...some a not so good".

    • @wayneedwards249
      @wayneedwards249 2 ปีที่แล้ว

      @@j.c.smithprojects That's how it goes I guess with all smart cookies. Lol

  • @evie8143
    @evie8143 2 ปีที่แล้ว

    beautiful to see, years of experience that goes wild on a mini truck.

  • @SumterWrecker
    @SumterWrecker 2 ปีที่แล้ว

    Mr JC Love this project. Thanks for sharing and stay safe

    • @j.c.smithprojects
      @j.c.smithprojects  2 ปีที่แล้ว

      hope you all stay cool during this heat wave.

  • @xxinsanitybomer4620
    @xxinsanitybomer4620 2 ปีที่แล้ว

    Right nice valeters truck for the best detailer in bisness .
    Love channel guys wee truck looks butchy true love ey always keep your woman happy

  • @shanesooth6267
    @shanesooth6267 2 ปีที่แล้ว

    Another enjoyable video. Thank you for sharing!

  • @ericcorse
    @ericcorse 2 ปีที่แล้ว

    Mrs Smith will have a real cool truck.

  • @bennyhill3642
    @bennyhill3642 7 หลายเดือนก่อน

    Looking good😇🙏👍

  • @ronaldmendez645
    @ronaldmendez645 2 ปีที่แล้ว +1

    Very nice upgrade on the welding machine JC 👍🏻😎🌟 Welcome to the century I’d just remember that to weld they used to use two batteries and two cables 🤔 Very impressive Your welding machine also pretty well explained your project 😎👌🏼 God Bless Both of You Guys 🙏🏻😇🙋🏻‍♂️

  • @normangallant9879
    @normangallant9879 2 ปีที่แล้ว

    Nice work.Cannot wait the final result

  • @OBS_Ford_Diesels_Inc
    @OBS_Ford_Diesels_Inc 2 ปีที่แล้ว

    Like a mini dump truck! My 1991 F-super duty dump truck has folding sides and boy do they make things easier.
    The tires should hopefully help it get around better and being a dump will be handy.

    • @j.c.smithprojects
      @j.c.smithprojects  2 ปีที่แล้ว +2

      she is worried i will take this project too far....who does she think i am?

  • @jonathanmurphy4562
    @jonathanmurphy4562 2 ปีที่แล้ว

    Really like how those wheels look on that truck , and the craftsmanship you put into your work is amazing . And being precise with your work with something that don’t need to be , just makes that truck much better.

  • @ervinhenschel9260
    @ervinhenschel9260 2 ปีที่แล้ว +1

    You are turning a POS truck into one serious mini beast unit! This is a cool build. Great job.

  • @onehappyfarmer3461
    @onehappyfarmer3461 2 ปีที่แล้ว +1

    Those are really sharp wheels and sure changed the appearance of the truck for the better.

  • @gerryhartung736
    @gerryhartung736 ปีที่แล้ว +1

    Now you have 4 spares for your wheelbarrow.

  • @machinist5828
    @machinist5828 2 ปีที่แล้ว

    I think you are going to appreciate that winch. My tractor is an old aircraft tug that has an open rear differential. I have a small winch that I have just gotten the thing with both back wheels on firm ground again. I have never "buried" it thank goodness.
    I don't have much trouble now I have the backhoe on it. That keeps everything pretty well planted in the rear.
    That dump bed is going to look good and work awesome.
    Those lights are going to be nice too.
    I'm looking forward to seeing how you make the front panel. I know you aren't going to be happy with a plain flat plate all the way across...... LOL!
    Looks like a nice build, if you are doing it it will be 😎👍.
    Cheers
    Terry

  • @tennesseetrucker9622
    @tennesseetrucker9622 2 ปีที่แล้ว

    Looks good. Nice work as always.

  • @brianherron5400
    @brianherron5400 2 ปีที่แล้ว

    Little truck looks good with those tires and wheels 👌. Nice job on bed of truck and hitch.

  • @stevengunter2843
    @stevengunter2843 2 ปีที่แล้ว

    Looks great changed the whole look of it!!

  • @northernliving2387
    @northernliving2387 2 ปีที่แล้ว

    You are very talented JC awesome jjob!!!

  • @braaapattack2937
    @braaapattack2937 2 ปีที่แล้ว +1

    Gonna have to call this the 1/6 scale “mini-national” 4.300 series 🤣. Def interesting seeing this progress

    • @j.c.smithprojects
      @j.c.smithprojects  2 ปีที่แล้ว +2

      i like that.

    • @digitalshackonthelane
      @digitalshackonthelane 2 ปีที่แล้ว

      @@j.c.smithprojects Now all it needs is a reclaimed 1.0 liter/999 cc Ford turbocharged 3-cylinder engine (From a euro ford focus) Just teasing! Still an awesome build!

  • @maidenrulz73
    @maidenrulz73 2 ปีที่แล้ว

    Awesome work…can’t wait to see it done

  • @povertywagon6.44
    @povertywagon6.44 2 ปีที่แล้ว

    I work at lincoln, thanks for supporting us

  • @robertvannicolo4435
    @robertvannicolo4435 2 ปีที่แล้ว

    Jc beautiful job on the dump frame and hitch those tires should make a huge difference 👍

  • @07350zhr
    @07350zhr 2 ปีที่แล้ว

    Dot approved wow. Really wanting a mini soon

  • @marksaunders2500
    @marksaunders2500 2 ปีที่แล้ว +1

    Hi from uk mate👋👍 goin to be another great profuct and helpful user around land for you both if needed👌 but we keep saying happy wife happy life!👍 you always go above and beyond on your projects to het best results and I appreciate you never waste anything until its needed for use👌 good job on tail lift and think be more than what you guys need and strong enough but new saying for jc is "" I am what I am 👌 "" bin a while for "" it is what it is"" lol but yeah good job all round man👍 thanks for your time and be safe see you soon👍👋

    • @j.c.smithprojects
      @j.c.smithprojects  2 ปีที่แล้ว +1

      "i am who i am." love it or hate it....it will never change.

    • @marksaunders2500
      @marksaunders2500 2 ปีที่แล้ว +1

      @@j.c.smithprojects I think you need another plaque to hang in shop with that quote on it and I love it lol 👌

    • @j.c.smithprojects
      @j.c.smithprojects  2 ปีที่แล้ว +1

      probably do.

  • @dirkkelly9596
    @dirkkelly9596 2 ปีที่แล้ว

    That’s a fancy little chicken feed hauler, I’m sure mrs smith an the chickens will approve 👍

  • @tonypaul2987
    @tonypaul2987 2 ปีที่แล้ว

    You are a good welder sir . Excellent job man. You do great work. Love watching your videos.

  • @randyhome1544
    @randyhome1544 2 ปีที่แล้ว

    I hope that tiny motor can move the new tires, steel reinforcement, and a dump bed of whatever.

    • @j.c.smithprojects
      @j.c.smithprojects  2 ปีที่แล้ว

      it will do ok for what she is going to use it for. its not like there might be a small diesel in its future.....

  • @morgansword
    @morgansword 2 ปีที่แล้ว

    Been so damn sick for so long that time on internet has been limited...... that little rig is lucky to found you JC. I seen so many of the tin lizzy's just tossed in scrap after being whipped on like this one has experienced. Must be some rich folk that can just beat on then toss away. I always took more care of my old stuff than I did some of the newer stuff I had... congrates on the welder upgrade as life is easier with good tools

  • @ptaszek1983
    @ptaszek1983 2 ปีที่แล้ว +1

    Love these mini truck videos!

  • @GeminiWoods
    @GeminiWoods 2 ปีที่แล้ว

    Cool project

  • @maxandsherrywike2984
    @maxandsherrywike2984 2 ปีที่แล้ว

    Mommas gonna have one of a kind !!!!!

  • @lawrenceashworth7668
    @lawrenceashworth7668 2 ปีที่แล้ว

    You may not be a welder but you are a great fabricator. You are doing a great job on this project 😀

  • @joshfancher3244
    @joshfancher3244 2 ปีที่แล้ว

    That things sweet buddy of mine had one he daily drove his I never did drive it to see how it was to drive one but shoot it was awesome

  • @steelfist65
    @steelfist65 2 ปีที่แล้ว

    This was a great video. I hope that you continue to show the progress!

  • @eddiepatterson5025
    @eddiepatterson5025 2 ปีที่แล้ว

    Love the tire and wheel combo. It made a huge difference. Looking forward to seeing the next video on the Mitsubishi. It probably won’t take much to make it DOT legal for street use. This is gonna be a nice little truck 🛻.

  • @christopherjohnson6056
    @christopherjohnson6056 2 ปีที่แล้ว

    Another enjoyable episode JC. 👍

  • @Chr.U.Cas1622
    @Chr.U.Cas1622 2 ปีที่แล้ว

    Dear J.C. Smith projects family.
    👍👌👏 Extremely well done again and as always (video and work). Maaan, I simply love to see you working on this tiny truck. I would love to own one myself (although I guess that I don't fit in the cabin). Of course it's a great idea to ad a dump bed, this will definitely come in handy. As always I love the fact, that you had all the material you needed for the modification "layin' around', even the hydraulic stuff! A good hoard is something I like too (especially nowadays).
    I had to grin because in my imagination the front of the truck lifted because of all the thick/heavy metal you welded on the rear of the "Missesmobil"! ;-) 😁 I really hope that you will not have problems because the new beasty looking tires are really wide. But if, I'm absolutely sure, that you will be able to solve the problem. I'm eagerly looking forward to watch the next part.
    Thanks a lot for making teaching explaining recording editing uploading and sharing.
    Best regards luck and health to all of you.

    • @j.c.smithprojects
      @j.c.smithprojects  2 ปีที่แล้ว

      apparently, this is only the beginning of this project....more ideas and plans to come.

  • @chrisvogt6040
    @chrisvogt6040 2 ปีที่แล้ว

    The many truck is looking very good

  • @johnkries8189
    @johnkries8189 2 ปีที่แล้ว

    cool project as always

  • @sack332
    @sack332 2 ปีที่แล้ว

    Lucky Mrs. :)

  • @randydobson1863
    @randydobson1863 2 ปีที่แล้ว

    HELLO JC AND MRS SMITH ITS IS RANDY AND I LIKE U VIDEO IS COOL JC AND THE MINI TRUCK IS COOL THANKS FRIENDS RANDY

  • @hollandduck79
    @hollandduck79 2 ปีที่แล้ว

    Hello from the Netherlands .
    the mini-truck comes together nicely with the lift , the new wheels , the dump bed . maybe add a mini trailer hihi
    thanks for the video JC .
    Sincerely Hollandduck

    • @j.c.smithprojects
      @j.c.smithprojects  2 ปีที่แล้ว +1

      mini gooseneck has been in my head for some time now.

    • @hollandduck79
      @hollandduck79 2 ปีที่แล้ว

      @@j.c.smithprojects
      nice . I'm looking forward to their videos

  • @chrissterling3225
    @chrissterling3225 2 ปีที่แล้ว +1

    Nice welder J.C. …..as I mentioned before…I prefer the Lincoln over the miller…both good welders but the Lincoln is smoother…less tempermental and has a sweet spot for arc on small increments of steel thickness…I love the 255a but that 260 looks awesome.
    I’m currently building a 4x6 dump trailer for my subcompact….I too am using a cylinder and pump off a lift gate and the same pin brackets…being a borderline hoarder has its benefits lol . Good luck on your project..coming along well . Btw..did you check northern tool for a reservoir?

    • @j.c.smithprojects
      @j.c.smithprojects  2 ปีที่แล้ว

      i found a reservoir. it was make only for maxxon lift gates. little pricey for a plastic tank but at least it is updated with a stronger collar. maybe this one wont crack in the same place.

  • @digitalshackonthelane
    @digitalshackonthelane 2 ปีที่แล้ว

    J.C. - You are a superstar! Really love this mod project! Great Job! Keep going!

  • @stephroll9708
    @stephroll9708 2 ปีที่แล้ว

    Have this Mustie “ Déjà-vu “ lol

  • @MoondyneJoe
    @MoondyneJoe 2 ปีที่แล้ว

    Grin, usual shoddy workmanship JC I see 😁 in years time when the rest of the truck has rusted away, your work will be about the only thing left completely in tact !
    Very impressive work.
    Don't forget the grease nipples on the hinges on the back.
    It is strange I know of 4 channels who have brought a jdm mini truck recently there excuses are that they are better and cheaper than a side by side and depending where you are you can also license them.
    Will you give it a new spray job as well JC?
    Tony from Western Australia 🇦🇺

    • @j.c.smithprojects
      @j.c.smithprojects  2 ปีที่แล้ว +1

      this started as a somewhat quick project but has quickly turned into an all out build....more to come.

    • @MoondyneJoe
      @MoondyneJoe 2 ปีที่แล้ว

      @@j.c.smithprojects just like the chook condo you built eh?
      Their is nothing wrong with doing a job properly, and in the long run it will save you time because of its reliability.
      I love the ram you put on the tray it probably can lift the whole truck off the ground without any effort, 🤔come to think of it does the trucks engine have enough umph to run it? 😁
      Tony from Western Australia 🇦🇺

    • @j.c.smithprojects
      @j.c.smithprojects  2 ปีที่แล้ว

      the hydraulic pump will be driven by and electric motor.

  • @Liberty4Ever
    @Liberty4Ever 2 ปีที่แล้ว

    Those are some pretty wheels! I'm going to powder coat the steel rims on my little Hijet. I like the simple utilitarian look, but I don't like the scuffs and the rust.
    You know you can buy a kei dump truck, right? :-)
    15:20 - You need a lathe!
    This is looking good. Great project. I love fabricating. I can watch it on TH-cam all day. :-D

    • @j.c.smithprojects
      @j.c.smithprojects  2 ปีที่แล้ว +1

      you can buy a dump but finding a left hand drive isnt easy. besides, whats the fun in buying when you can make it yourself/

  • @RonR1
    @RonR1 2 ปีที่แล้ว

    I see you are building a tank chicken dumper to go with the chicken bomb shelter.
    Great stuff and nice new welding machine. Thanks for sharing!!

  • @christopherjohnson6056
    @christopherjohnson6056 2 ปีที่แล้ว

    Mr Smith what happened to the 86 International you bought like your dads , was looking forward to some more of that , not that every thing else is not just as good ,👍👍

  • @richardhuckaby5422
    @richardhuckaby5422 2 ปีที่แล้ว

    this is one of your better videos IMHO.
    can you build the homemade dump bed for less than
    buying the OEM dump bed? (Ive seen that option)
    ps: no chrome acorn nuts for the cool new wheels?
    could you maybe raise the whole cab to solve front wheel
    clearance & dump body line issues?

    • @j.c.smithprojects
      @j.c.smithprojects  2 ปีที่แล้ว

      video to come on the lug nuts...what i found was ridiculous.

  • @Cheesedrip268
    @Cheesedrip268 2 ปีที่แล้ว

    Great job, JC. Do you mind sharing where did you get the wheel and tire and what is the bolt pattern?

    • @j.c.smithprojects
      @j.c.smithprojects  2 ปีที่แล้ว +1

      AMAZON. check your own bolt pattern. may be different.

    • @Cheesedrip268
      @Cheesedrip268 2 ปีที่แล้ว

      @@j.c.smithprojects link please.

  • @bryand1204
    @bryand1204 2 ปีที่แล้ว

    JC What about making a reservoir out of an old small air tank, kind of like how they do on a gravel truck, and you could top feed the pump you have and just make a plate with a feed and return drilled and nipples welded in the plate.
    Just a thought and then the tank won't dry rot and crack again.

    • @j.c.smithprojects
      @j.c.smithprojects  2 ปีที่แล้ว

      I thought about it but I'm told that particular pump has to be submerged in the hydraulic fluid.

    • @bryand1204
      @bryand1204 2 ปีที่แล้ว

      @@j.c.smithprojects oh ok well I know that the companies that make the car lifts also have similar pumps on them as well if that helps

    • @j.c.smithprojects
      @j.c.smithprojects  2 ปีที่แล้ว

      i was finally able to locate a reservoir. it is on its way.

  • @jaxsonhugh9334
    @jaxsonhugh9334 2 ปีที่แล้ว

    Amazing metal work 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻

  • @the-btc-tradingfloor2808
    @the-btc-tradingfloor2808 2 ปีที่แล้ว

    JCSP is ultra cool

  • @jeffo881
    @jeffo881 2 ปีที่แล้ว

    Sold, I'll take it, when can I pick it up????

  • @ydocproductions5593
    @ydocproductions5593 2 ปีที่แล้ว

    This has been a really cool project so far! I really enjoyed the way you came up with a way to fabricate what you had on hand to make a dump bed. Looking forward to seeing the lift get installed. By the way I can’t remember what motor you said it had? It’s a little 4cyl isn’t it?
    Speaking of projects I just picked up an old 1988 F-250 7.3 IDI diesel for a whooping $700. (Because one broken diesel truck wasn’t enough for me haha!) Great video as always J.C. Take care

    • @j.c.smithprojects
      @j.c.smithprojects  2 ปีที่แล้ว +1

      3 cylinder gas engine..something like 30hp if i recall. idi is a great reliable engine. not fast but simple and easy to care for.

  • @johnhoehn1692
    @johnhoehn1692 2 ปีที่แล้ว

    Buy a plastic welder from hobo freight and repair the reservoir?

  • @gregdutriou4374
    @gregdutriou4374 2 ปีที่แล้ว

    Hi my Grandad had a mini fan called a Sambar this truck reminds me of it

  • @garrysgarage1958
    @garrysgarage1958 ปีที่แล้ว

    Cool build , did it ever get finished?

  • @caspaceacas5443
    @caspaceacas5443 2 ปีที่แล้ว

    Great video again love all you do and really enjoyed the chicken coop videos something different and showing you are versatile for other projects. And just ignore negative comments it's just idiots wanting a fight on social media.

  • @Mjc103
    @Mjc103 2 ปีที่แล้ว

    Have you ever thought about buying a hydraulic punch for your fab work?

    • @j.c.smithprojects
      @j.c.smithprojects  2 ปีที่แล้ว +1

      no. i didnt think i did a lot of fab work....maybe i do more than i think.

  • @paulschuppener
    @paulschuppener ปีที่แล้ว

    What tires and rims did you go with?

  • @dogger99
    @dogger99 ปีที่แล้ว

    Where did you purchase the wheels and tires?

  • @augustinboyd9626
    @augustinboyd9626 2 ปีที่แล้ว

    Wife's mini monster truck. Go Mrs. JC go

  • @ianatkinson8464
    @ianatkinson8464 2 ปีที่แล้ว

    😎👍

  • @cmh2111
    @cmh2111 2 ปีที่แล้ว

    Could you not just body lift the cab? No suspension mods required, and it would help keep the body lines for the box, allowing you to build the dump frame as you originally wanted to.

    • @j.c.smithprojects
      @j.c.smithprojects  2 ปีที่แล้ว

      the body is part of this "frame". it doesnt unbolt from one another.

  • @LucasMoening
    @LucasMoening 2 ปีที่แล้ว

    Fabri-cobble… where have I heard that before?

  • @CaptKirk1701
    @CaptKirk1701 2 ปีที่แล้ว +1

    When are you going to put a 4BT in it? lol

    • @j.c.smithprojects
      @j.c.smithprojects  2 ปีที่แล้ว +1

      wish it had room....there may be another phase to this project later.......

  • @neilmcintosh1200
    @neilmcintosh1200 2 ปีที่แล้ว

    More weight, bigger diameter wheels..... weedy engine......nitrous kit?

  • @kennethsaville7451
    @kennethsaville7451 2 ปีที่แล้ว

    With all the metal and weight you are adding to that little you are going to have to do an LS engine swap to get the thing to move. I just love your work.

    • @j.c.smithprojects
      @j.c.smithprojects  2 ปีที่แล้ว

      no gas engines for me......hint hint....

    • @kennethsaville7451
      @kennethsaville7451 2 ปีที่แล้ว

      @@j.c.smithprojects My bad, sorry. You will have to drop in a turbo diesel. LOL.

  • @paulog8813
    @paulog8813 2 ปีที่แล้ว

    JC take a look at Mustie1 channel. He bought a Minitruck with a factory Dump Truck and also 4x4. He seems to be a nice guy and might give some good ideas from the factory solutions.

    • @j.c.smithprojects
      @j.c.smithprojects  2 ปีที่แล้ว

      i believe mustie1 to be a very humble and personable man.

    • @paulog8813
      @paulog8813 2 ปีที่แล้ว

      @@j.c.smithprojects Agree. have a nice weekend

  • @michaelhartloff3833
    @michaelhartloff3833 2 ปีที่แล้ว

    She's going to be flossing on the way to the chicken coop

  • @didydota
    @didydota ปีที่แล้ว

    Anyone isn't curious how the truck sounds like with an aftermarket litre bike exhaust?

  • @colinblankenship2401
    @colinblankenship2401 2 ปีที่แล้ว

    What is the name on this mini truck? We are looking for one.

  • @tallmammanman6626
    @tallmammanman6626 2 ปีที่แล้ว

    Hi need some help finding a transmission for a 2007 hino 258

  • @rdeanbenson2214
    @rdeanbenson2214 2 ปีที่แล้ว

    Still tiny truck. Had Datsun once...broke it in half twice.

    • @j.c.smithprojects
      @j.c.smithprojects  2 ปีที่แล้ว +1

      yeah well....that is the whole idea. mini truck to use on our property

  • @michaelhartloff3833
    @michaelhartloff3833 2 ปีที่แล้ว

    Wassup

  • @daveandlauriemarsh4750
    @daveandlauriemarsh4750 ปีที่แล้ว

    So what ate the wheel specs

  • @KM_59
    @KM_59 2 ปีที่แล้ว

    Professor you should start modifying and sell mini’s -- I’ll take a 4x4 one …. Please sigh it

    • @j.c.smithprojects
      @j.c.smithprojects  2 ปีที่แล้ว

      this project is a neat change of pace but it is tough working with such small and thin metal.

    • @KM_59
      @KM_59 2 ปีที่แล้ว

      @@j.c.smithprojects does look like your ordinary line of work !! But hey it for mrs jc nothing else to be said !!

    • @j.c.smithprojects
      @j.c.smithprojects  2 ปีที่แล้ว +1

      she doesnt ask for much. so, when she does...i have to deliver!

  • @Doogie_Causey
    @Doogie_Causey 2 ปีที่แล้ว +1

    Are these mini trucks street legal?

    • @85square
      @85square 2 ปีที่แล้ว

      yes

    • @j.c.smithprojects
      @j.c.smithprojects  2 ปีที่แล้ว

      some are. many are restricted to 35mph and under roads here in ohio.

  • @ichbinlieb7125
    @ichbinlieb7125 ปีที่แล้ว

    Where is part 1?

    • @j.c.smithprojects
      @j.c.smithprojects  ปีที่แล้ว

      It didnt get put in the play list. in is in it now.

    • @ichbinlieb7125
      @ichbinlieb7125 ปีที่แล้ว

      @@j.c.smithprojects Thank you very much. 🙂

  • @tannycourtad2858
    @tannycourtad2858 2 ปีที่แล้ว

    👌 p♥r♥o♥m♥o♥s♥m

    • @j.c.smithprojects
      @j.c.smithprojects  2 ปีที่แล้ว

      i had no idea what this was....i looked it up. i am not going top pay for followers. i do what i do and if folks enjoy it and want to watch...great. if they dont, that is just fine too.

  • @johnhoehn1692
    @johnhoehn1692 2 ปีที่แล้ว

    Buy a plastic welder from hobo freight and repair the reservoir?