Very nifty,but one can do this w just an empty food can,a roll of toilet paper (pull out the cardboard in the middle and stuff the roll down in the can),and some preferably 91 or 99% alcohol or other fuel source which is doesn't put off too much CO2. Lasts roughly 1 - 1.5 hours,which is plenty of time for cooking. But just add more alcohol and re - light.
If we were ever in the Apocalypse, or stuck in some part of the world with no modern technology, having you around is like having a magic genie with you. congrats on your creativity.
I love your ideas! Keep them coming! I have a question - i have fule reservoar that is 2000L and try to make a rocket stove out of it. But i get to much smoke, and the heat is not reaching the burnchaimber that is abut 150L but the fule reservouar with wood get hot... :(
Never stop doing what you do! You are very talented and I appreciate all of the hard work you put into not only your projects but also your videos. God bless you and stay safe 👊🏼
Great vidio, how about a reburner for my outdoor semi type air tight wood stove, trying to get all the heat blowing forward into tiki bar area. Thanks for the morning coffee...
My mother used to use this kind of stove about 25 years ago. She used to put saw dust in such a stove. And she pressed the saw dust well. She made a stove out of clay. It lasted for a long time.
Hi👋🤠; Hate to bust your bubble, but you Did Not invent this. These have been around for over 50 years. Started out as a "Wood chip stove" for camping and were mostly D.I.Y. using large tin cans🤔🧐😉
i believe that the same eastern european man who makes the stoves and the videos also writes the titles but im not sure, the fbi needs to investigate this
This stove uses liquid fuel and its design is not repeated anywhere! Or do you think that all stoves in the world are the same just because of the flames that come out of them?
@@SpiderF27 It is environmentally friendly if done at proper temperature. It generates excess energy. Garbage would decay releasing methane, and this way it would go straight to carbon dioxide. Plastics are basically a form of fossil fuels. It's better to incinerate it and get energy out of it than incinerate coal.
@@SpiderF27 Research it - you are wrong. You need a high temperature. If the temperature is low, then you would be correct. I am currently in a 3rd world country, I assure you, an incinerator would be better for the environment. Unless you have lived and seen the garbage in these countries, it is difficult to understand.
@@talksonabox Recycle everything. Process all with a Shredder, pack the materials in big bulk bags and sell them in China. Chinese have processing plants that reuse everything. In this way you'll keep your environment clean and make some money in the process too. Don't jump straight into old methods of doing things. Be smart, be intuitive and you'll progress. Burning? How easy want you to get rid of the problem?!
Fuel to flow out through the bottom when refueling, prevents the construction of the furnace itself - the video shows everything in detail, look carefully. 🤖
@@HiltonT69 well apparently not, because here you are. Talkin to me like you know me or something. I do my best to use my manners and to be respectful towards others on here. I can't stand this superiority issue people have on here. 😐
Ja starsza pani zrobiłam piękny kominek /ogrzewacz z dwóch doniczek ceramicznych na dwóch ceramicznych podstawach takie jak pokazują filmiki. Ponieważ umiem i lubię się posługiwać wiertarką więc poradziłam sobie z wyżłobienia dwóch dziur na nagwintowany trzpień, ze śrubkami i podkładkami także to wszystko jest bezpieczne. Coś sobie udowodniam ,ale też i to mi udowodniło ,że w mieszkaniu tego trzymać za bardzo nie można, dlatego że podgrzewacze wydzielają zapach, i nawet jeśli włożę tam wkłady zapachowe ,to jest to trochę nie do wytrzymania. Same donice osiągają bardzo wysoką temperaturę i można na niej podgrzać kubek z herbatą do 30 °, ale jako podgrzewacz pomieszczenia jest to jednak mało wydajne. Użyłam ośmiogodzinnych podgrzewaczy., ale przy minusowych temperaturach one nie podgrzewają tylu godzin. Te kuchenki które pan zrobił bardzo kopcącą.😢
Pft.. great effort in making a complicated "hobo stove". Similar has been in use since the 1900's. Could be made with some tin cans cotton puffs and alcohol or 100 proof liquor.
This is just a random thought I had but since one can watch welding with no harm from a video camera and see exactly what one is doing why don't welding hats have small built in video viewers instead of super dark glass still? Put a protective glass plate on the lens of course. Seems a very logical idea to me. One can actually See all the time what is doing ! 🤔
Isn't this just an adjustable sterno pot? I keep a few around for emergencies. They sell them at Wal-Mart for like $2 But I guess it's cool you can DIY one.
@VAinWI Just Google "Sterno pot." It's a common camping / cooking item. Restaurants & caterers use them to keep food warm. Like I said, they sell them at Wal-Mart.
pretty sure no epoxy will stand the heat generated by the stove, especially when a pot is placed on top to cook something. the flames would be directed sideways towards the glued seams and burn it off.
do you think people have welders to duplicate your manufacture, to help themselves ????? Your presentation is not appropriate as most 97 percent, can't duplicate your video manufacture. Why do you show that it is not appropriate. very good to see but not a duplicatable prep.....
This design is flawed, in my opinion. It is missing a mantle which would allow you to burn secondary gases, like CO. Also it is missing an insulated heatshield/IR shield, which would direct the radiation back into the flame, increasing the temperature above the flame, where you actually need it. You can do better than this. I love your channel.
6:43 Jesus dude. Look at that arm 20 carbs are less a day in the fat. Just falls off brother Get back to your high school weight and feel 18 years old again Turns out age has nothing to do with it. It's just how good of shape you're in I lost 0.5 lb per day on that diet, did it 9 years ago and then went back to eating normally I still haven't gained anything back
This is an interesting variation of the video. I think that in the future I will definitely make such a project, it is very interesting. Thanks for the idea!
This man is an inventor of the highest quality he should sell his designs to large companies
Very nifty,but one can do this w just an empty food can,a roll of toilet paper (pull out the cardboard in the middle and stuff the roll down in the can),and some preferably 91 or 99% alcohol or other fuel source which is doesn't put off too much CO2. Lasts roughly 1 - 1.5 hours,which is plenty of time for cooking. But just add more alcohol and re - light.
always a pleasure to look at your projects
If we were ever in the Apocalypse, or stuck in some part of the world with no modern technology, having you around is like having a magic genie with you. congrats on your creativity.
It looked like he used electric tools and seems pretty modern
Improve (1),
innovate (10),
Invent(100).
and you can buy similar for propan. cheap and no fatigue for such work.
I love your ideas! Keep them coming!
I have a question - i have fule reservoar that is 2000L and try to make a rocket stove out of it. But i get to much smoke, and the heat is not reaching the burnchaimber that is abut 150L but the fule reservouar with wood get hot... :(
I always seem to see you vids during the winter. I love them.
😊I am very glad that you like my videos! Come again, thanks!🤝🤖
Legend.👍💛👊
I get so sleepy when I have 5 of them going at once lmao
That works. Great gadget, just love it ! Thanks
Any magic oven consumes more energy than it produces
Incredibile ! You ve discovered the fire !
glued?
Question? when you poured in the fuel, why didn't run out the bottom? i may just be dumb so sorry if it's a dumb question.
I think it was implied that the toilet paper/alcohol combo goes in an empty can with the Bottom NOT Removed.🤔🧐😉
Love the little man
the little robo with its welding mask! 😁
Never stop doing what you do! You are very talented and I appreciate all of the hard work you put into not only your projects but also your videos. God bless you and stay safe 👊🏼
Hello. I am very pleased that my videos are liked and can be useful to someone.🤝🤖
create a lamp without electricity???
Great vidio, how about a reburner for my outdoor semi type air tight wood stove, trying to get all the heat blowing forward into tiki bar area. Thanks for the morning coffee...
My mother used to use this kind of stove about 25 years ago. She used to put saw dust in such a stove. And she pressed the saw dust well. She made a stove out of clay. It lasted for a long time.
If sawdust was used, it's a different oven! Or do you think all ovens in the world are the same?
@@mister-robo i dont know.but it work very well.
Μπράβο σου φίλε είσαι μάστορας
Hi👋🤠; Hate to bust your bubble, but you Did Not invent this. These have been around for over 50 years. Started out as a "Wood chip stove" for camping and were mostly D.I.Y. using large tin cans🤔🧐😉
"invention" used to grab more views !
"invent" is a lot about whether he knew about other stuff like this or not. IMO. Good on him for sharing .
@@carlljohnson7894 well ! whole youtube videos are like this ... ofc, we need to appreciate sharing
He's just having his biden moment
@@goochi5544 !?
I'M INVENTED....MEANS I AM INVENTED, IT SHOULD READ, I HAVE INVENTED, OR I'VE INVENTED.....WHO WRITES THESE TITLES???????????
i believe that the same eastern european man who makes the stoves and the videos also writes the titles but im not sure, the fbi needs to investigate this
I don't know who's first but "foguista" just made a similar one with a beer keg
Great idea.greetings from Canada
apocalypse means unveiling
This is an old idea, but nice to see it again
This stove uses liquid fuel and its design is not repeated anywhere! Or do you think that all stoves in the world are the same just because of the flames that come out of them?
What is that bright blue marker?!
I have a dachshund assistant as well!
Hey ✌️from Cape Breton,Nova Scotia 🏴
✌🤝🤖
you have serious skills. I have to ask, can you build an incinerator for garbage and plastics? With enough heat, it is environmentally friendly.
Incinerating garbage and plastic is not environmentally friendly at all. In fact is even worst then leave it alone.
@@SpiderF27 It is environmentally friendly if done at proper temperature. It generates excess energy. Garbage would decay releasing methane, and this way it would go straight to carbon dioxide. Plastics are basically a form of fossil fuels. It's better to incinerate it and get energy out of it than incinerate coal.
I saw a video of making plastic into diesel
@@SpiderF27 Research it - you are wrong. You need a high temperature. If the temperature is low, then you would be correct. I am currently in a 3rd world country, I assure you, an incinerator would be better for the environment. Unless you have lived and seen the garbage in these countries, it is difficult to understand.
@@talksonabox Recycle everything. Process all with a Shredder, pack the materials in big bulk bags and sell them in China. Chinese have processing plants that reuse everything. In this way you'll keep your environment clean and make some money in the process too. Don't jump straight into old methods of doing things. Be smart, be intuitive and you'll progress. Burning? How easy want you to get rid of the problem?!
Hermoso 👏🏼 trabajo 👍🏼 es una pena que todo el mundo 🌎 no hablemos el mismo idioma, soy malo leyendo a grandes velocidades jeje 👋🏼🙂
Lose the 'M from headline and it's correct.
Lose an ‘o’ from “loose” and it’s correct.
your corners are overshot and blobby because your nozzle is depositing too much in the corners. mate, u need to cali ur kfactor.
Loved the welding mask on the figurine! "Quick & dirty" solutions are better than NO solutions!
Ahahahaha! Thank you my friend! 🤣🤣🤖
What stops all the fuel running out the bottom when you fill it up ?
Fuel to flow out through the bottom when refueling, prevents the construction of the furnace itself - the video shows everything in detail, look carefully. 🤖
could it have a thin tube going into the side attached to a resevoir of fuel so that it refills itself?
There is a physical law of communicating vessels - to use it the way you want it, you need to make a small system of tubes and valves.
I’m confused. If the hole in the cylinder goes all the way through, what is holding the fuel, keeping it from running out the bottom?
Look at the inner tube the cuts only are on the top. The bottom half is solid creating a reservoir. It works like a zippo lighter.
@@poppyd9758 ah thank you
Done before, but thanks.
😊🤝🤖
Nice
Neat 👍
Thanks a lot, bro! 🤖
Old kind of stove in the Philippines; sawdust, rice chaff or paper and dry leaves as fuel.
This is a completely different design and device. And then there is liquid fuel.
That's kinda funny cause I didn't see him claim to be the inventor..... Either way, I find it very helpful.
Did you not read the video title?
@@HiltonT69 well apparently not, because here you are. Talkin to me like you know me or something. I do my best to use my manners and to be respectful towards others on here. I can't stand this superiority issue people have on here. 😐
Ok felicitări ❤❤❤
❤❤❤
Awesome
Thanks a lot!🤝🤖
Very tidy!
I am very pleased that you like my work. Thank you!🤝🤖
Every one has a workshop troll that steals your tool as soon as you put it down but I have never seen mine but yours is red I wonder if mine is too 🤔
Ahahahahahaha. My troll doesn't steal tools, he helps me make my videos)). 🤣🤣🤖
Ja starsza pani zrobiłam piękny kominek /ogrzewacz z dwóch doniczek ceramicznych na dwóch ceramicznych podstawach takie jak pokazują filmiki. Ponieważ umiem i lubię się posługiwać wiertarką więc poradziłam sobie z wyżłobienia dwóch dziur na nagwintowany trzpień, ze śrubkami i podkładkami także to wszystko jest bezpieczne. Coś sobie udowodniam ,ale też i to mi udowodniło ,że w mieszkaniu tego trzymać za bardzo nie można, dlatego że podgrzewacze wydzielają zapach, i nawet jeśli włożę tam wkłady zapachowe ,to jest to trochę nie do wytrzymania. Same donice osiągają bardzo wysoką temperaturę i można na niej podgrzać kubek z herbatą do 30 °, ale jako podgrzewacz pomieszczenia jest to jednak mało wydajne. Użyłam ośmiogodzinnych podgrzewaczy., ale przy minusowych temperaturach one nie podgrzewają tylu godzin. Te kuchenki które pan zrobił bardzo kopcącą.😢
Deus Abençoe todos de sua familia. De Ms Brasil.
Muito obrigado! Volte sempre, ficarei sempre feliz em vê-lo neste canal!🤝🤝🤖
Good luck
🤝
Buy an Irish Vulcano. Much better!
Pft.. great effort in making a complicated "hobo stove". Similar has been in use since the 1900's. Could be made with some tin cans cotton puffs and alcohol or 100 proof liquor.
simplicity, - the reason the AK47 is still used so many years later.
WeebRemover : Copied from a German assault sub. machine gun - thats AK-47!...
This is just a random thought I had but since one can watch welding with no harm from a video camera and see exactly what one is doing why don't welding hats have small built in video viewers instead of super dark glass still? Put a protective glass plate on the lens of course. Seems a very logical idea to me. One can actually See all the time what is doing ! 🤔
The thing is that the camera has a focusing system, and if you put on a very dark lens there will be problems with focusing.
@@mister-robo but you are not using a dark lens to video this ? You dont have a manual focus setting?
Isn't this just an adjustable sterno pot?
I keep a few around for emergencies.
They sell them at Wal-Mart for like $2
But I guess it's cool you can DIY one.
It's nothing like a sterno.
@sonofbr Have you ever used a sterno pot? I have, & it is exactly like this. Except this is bigger & the flame is adjustable.
@@joncassell8550do you have a link? I’d love to see one.
@VAinWI Just Google "Sterno pot."
It's a common camping / cooking item. Restaurants & caterers use them to keep food warm.
Like I said, they sell them at Wal-Mart.
you just put wood in it ??
Think of it like a giant zippo lighter. The stuffing inside is saturated by the fuel and burns with the airflow from the bottom of the can.
load of hand
I like
I am very pleased that you like my work. Thank you!🤖
Nice work
I am very pleased that you like my work. Thank you!🤝🤖
Innovate Every Day!! 🎉
😊🤝🤖
Mantap 👍
🤝🤖
pretty sure no epoxy will stand the heat generated by the stove, especially when a pot is placed on top to cook something. the flames would be directed sideways towards the glued seams and burn it off.
MAD
😊😄🤖
Es una creación.....
¡Muchas Gracias! Vuelve otra vez, ¡siempre me alegraré de verte en este canal!🤝🤖
🎉🎉🎉🎉🎉🎉🎉
🤝👍👍👍
😄
😊🤝🤖
do you think people have welders to duplicate your manufacture, to help themselves ????? Your presentation is not appropriate as most 97 percent, can't duplicate your video manufacture. Why do you show that it is not appropriate. very good to see but not a duplicatable prep.....
This is nothing new. Same principles different shape
Put two side by side running, one dampened one not, willing to bet the fuel is being used the same amount from heat evaporation.
Haha Fucking.Jadul
Ha ! You didnt invent shyt.
Hello mr Robo,
It has been a long time, how are you, reber me you sent me a message. Years ago.
Regards
Mr James.
Lol 11 second ago😂🗿
You're the first! 😂👍🤝 🤖
Uiiii que ridículo. 😂
This design is flawed, in my opinion. It is missing a mantle which would allow you to burn secondary gases, like CO. Also it is missing an insulated heatshield/IR shield, which would direct the radiation back into the flame, increasing the temperature above the flame, where you actually need it. You can do better than this. I love your channel.
6:43 Jesus dude. Look at that arm
20 carbs are less a day in the fat. Just falls off brother
Get back to your high school weight and feel 18 years old again
Turns out age has nothing to do with it. It's just how good of shape you're in
I lost 0.5 lb per day on that diet, did it 9 years ago and then went back to eating normally
I still haven't gained anything back
“Jesus” is not an expletive. He is the Savior of the world. He’s a friend of mine.😊
di STRONZATE SE NE VEDANO TANTE
What kind of idiot this..
Can you please do us a favor a big favor, pls steam generator than can push or turn like a 3 hp? pls?
This is an interesting variation of the video. I think that in the future I will definitely make such a project, it is very interesting. Thanks for the idea!