Really enjoyed the video! And yes I'm one of those guys thinking about going to a Mustang II setup on a 1966 Mustang. It's been a couple years since you installed AJE system, how's it holding up?
I’ve done the exact Aje mod. Need to do the export brace and power steering! The original aje kit made a clunky noise. Switched to the same caster camber kit and strange shocks.
No issues at all. The thing drives amazingly straight and control is always right where Ive wanted it. The rough ride is something that I'm tackling now. I'm considering a 175lb 14” spring for the coik overs…i think this will give me more flex. Hope to tackle some testing next month on that. But haven't had any alignment issues.
Hi how low does the K frame cross member hang below the chassis rails ? It looks pretty low and is there any adjustment for lower control arms... tganjs
No lower than the stock engine frame mounts. There still is some wiggle to customize the height of the engine to your needs (before you have to cut the tunnel). On these lower control arms yes there is plenty adjustment on the Racecraft 11.5” arms. One caution here is they work well with my wheel choice of zero offset. Turning radius could be limited with other wheel choices. I’m working on a mod that would allow more wheel options.
I don't know any other car as beautiful as this one😢😢😢
Id like to see a video on your electric steering conversion on the fastback Thanks
Let’s do this! I have one in the works. That’s for this idea.
I don't know any other car as beautiful as the 1968 Ford Mustang😢😢😢
I really enjoyed the video, Brian! Nice work. Great looking fastback! 🙌
Great video and nice to see a new vid! Man your editing went to 1000% on this one bro! :)
Really enjoyed the video! And yes I'm one of those guys thinking about going to a Mustang II setup on a 1966 Mustang. It's been a couple years since you installed AJE system, how's it holding up?
Good information as always!
Thank you! Appreciate the support for sure.
Your videos are great. What is your wheel and tire set-up?
Many thanks! American Racing wheel VN510 18x8. 255 tires all away around.
I’ve done the exact Aje mod. Need to do the export brace and power steering! The original aje kit made a clunky noise. Switched to the same caster camber kit and strange shocks.
it is the most beautiful car in the world😢😍😍😍😍😍😍
Would be good to assemble an export brace when everything was cut up.
Couple questions. What size coil springs did you end up using? What size sway bar did you use?
Hey there…12” coil springs 175#. 1.125” sway bar.
Did you just take it to a normal alignment shop? Just curious if they ever had any issues getting it aligned.
No issues at all. The thing drives amazingly straight and control is always right where Ive wanted it.
The rough ride is something that I'm tackling now. I'm considering a 175lb 14” spring for the coik overs…i think this will give me more flex. Hope to tackle some testing next month on that.
But haven't had any alignment issues.
How tall are you. Not much distance between your head and ceiling
Welcome back! How were the welds on your AJE crossmember ?
Yeah!! Thanks - K member welds looked good...no issue there. I believe that issue with AJE has been solved.
What spindles are you using?
I'm running a 351c, does this setup need a rear sump pan?
It does. A fox body style oil pan was what it was designed around.
Also how did you get side to side measurements for the k memeber? I figured measure from k memeber to outer frame lip?
so is this the coup to a fastback car ? or is this a different car ?
Thanks! This is a true fastback. Another Coupe to fastback is coming soon!
Can't find the parts on eBay?
Hi how low does the K frame cross member hang below the chassis rails ? It looks pretty low and is there any adjustment for lower control arms... tganjs
No lower than the stock engine frame mounts. There still is some wiggle to customize the height of the engine to your needs (before you have to cut the tunnel).
On these lower control arms yes there is plenty adjustment on the Racecraft 11.5” arms. One caution here is they work well with my wheel choice of zero offset. Turning radius could be limited with other wheel choices. I’m working on a mod that would allow more wheel options.
"like a Porsche" and shows a McLaren. @1:27
How about just get to the point.