Looks nice! I paid roofers to put a new shingle roof on my house and they re-used old copper flashing around my brick chimney. Now in middle of winter, its leaking water all the way downstairs to my garage. I thought they would install all new flashing like you did. Guess I was wrong for expecting a professional job!
I.might add ( you maynhave added. But I didn't see it ) a self adhering seal under the right lower side where the little shingle end segments meet the chimney. Those are always s problem for us in high winds and storms.
Sorry Fresh mortar will never hold up. Mortar does not adhere to metal. To do it correctly you have to use asphalt roof cement and fill the cut first with it then install metal and then top caulk.
counter flashing should be stepped not one piece , if you you make it one piece it can move and crack brick and you should mortar not caulk it not bad job it will work I was just taught different
Learn how to give your lower flashing a nice bend to the point that there is gonna be enought pressure on it and you are not going to have to put any nails throught it. n you should only cut throught the mortar not the brick G
Looks nice! I paid roofers to put a new shingle roof on my house and they re-used old copper flashing around my brick chimney. Now in middle of winter, its leaking water all the way downstairs to my garage. I thought they would install all new flashing like you did. Guess I was wrong for expecting a professional job!
My chimney had that same gnarley tin flashing that you replaced. Impressive improvement!!
I do about 5 to 10 chimneys a week. You do nice work. I approve.
What does a job like this cost?
When you were doing such a repair you should have added a cricket at the back of the chimney that is where the leakage problems come from.
Anthony Farrell what’s a cricket?
Try this link en.m.wikipedia.org/wiki/Cricket_(roofing) 😏
How much price estimate for similar job? (Materials+labor)
I need help repair my roof Leaking??
I dont see any problems installation wise, a job well done if you ask me.
I.might add ( you maynhave added. But I didn't see it ) a self adhering seal under the right lower side where the little shingle end segments meet the chimney. Those are always s problem for us in high winds and storms.
How much to do this exact job ? (Price total materials+labor)
I heard you mention using Flex Seal and that it's really tough.
I’m in southwest houston Tx
Very nice work!
Mortar joint counter flashing sealed with fresh mortar is only way to properly seal.
Sorry Fresh mortar will never hold up. Mortar does not adhere to metal. To do it correctly you have to use asphalt roof cement and fill the cut first with it then install metal and then top caulk.
I love when roofers cut the lead when they use step flashing I like to keep the lead on an run silicone
Beautiful
counter flashing should be stepped not one piece , if you you make it one piece it can move and crack brick and you should mortar not caulk it not bad job it will work I was just taught different
Not true. It doesn't move and one piece is preferable to many points of water entry. He did amazing work here.
Learn how to give your lower flashing a nice bend to the point that there is gonna be enought pressure on it and you are not going to have to put any nails throught it. n you should only cut throught the mortar not the brick G
Bunch of bums that would do a job like this.
I left at "flex seal"
BLOW YOUR NOSE, OR DO ANOTHER LINE... JUST STOP FKN SNIFFLING
It was probably cold ass hole