HOW MUCH DID I SPEND ON ALL MY Carpentry POWER TOOLS (WAS IT WORTH IT !!!!!?)
ฝัง
- เผยแพร่เมื่อ 14 ต.ค. 2024
- Hello and thank you for watching this video.
In this video I tell you how much I have spent on all my power tools I also tell you how much each tool cost.
I really don't want people to take this video the wrong way so I will state , I am not doing this video to show off. this video is for information purposes only , its for the people that want to start a job in carpentry and are wondering how much it may cost in tools. I really do hope you like the video.
All my links here ➡ :linktr.ee/TJBU...
If you would like to support the Chanel while getting some new gear check out my amazon shop me and the apprentice get a small amount from each purchase. thank you. we appreciate you all.
www.amazon.co....
If you would like to support us in another way you can also send a thank you gift under the THANKS icon located under the video all Gifts/commission go towards me and the apprentice and keeps the videos coming , thank you all so very much.
![[DRIP] ‘Love, Maybe’ PREVIEW](http://i.ytimg.com/vi/U7hwHp95m1k/mqdefault.jpg)
Cheers from San Diego California... this is one reason why you can't go cheap on jobs. Rookies don't have 7K in tools in their truck. Saw you fitting those doors mortising the hinges. You're a great carpenter. Me..35 years mostly framing..
Tools are an investment mate, if you use them every day, they pay for themselves over time. Some quicker then others 👍🏻 nice drone shot at the end
Hope you and the apprentice have a good Xmas bro 👊🏻
thankyou you too
I have zero experience in trade but I’m really enjoying your content. Keep up the great work
Glad I'm not the only one spending thatsort of money on tools too. Good selection I have most but I have the hikoki router and trim router.
Make sure your van is alarmed and immobilised pal, and maybe a tool vault bolted inside aswell
I recommend the paslode im350 nailer. Lightest gun and that means alot to me.
Festool vacuums are very good but your miter saw isn't the best for dust extraction.
Get yourself the small 18v blower, it has 1000 uses
I agree, get a blower it's a game changer. You will never have to sweep up again.
Excellent video buddy I’m a Makita man myself but for the dust extractor get yourself a Festool brilliant bit of kit but shop around for that and for the laser level I’ve got two Huepar lasers again really really good bits of kit. Keep up the good work lad 👍
thankyou mate really appreciate the advice
Get the festool CTLC cordless extractor, it's so good! Merry Christmas 👍
All that stuff looks very handy
Merry Xmas to the boss and the apprentice.
thankyou mate i appreciate it
Merry Christmas to you and your apprentice. And keep posting.
Thanks
Regarding the dust extractor,I have 3 of them,just open the top section and disconnect the alarm it’s only a cable going into it,easily done
Thanks for your videos man, really like your content.
Cheers
Forget the DeWalt nailers, get Hikoki or Milwaukee
Forget the vacuum, get the festool one or mirka.
Been watching the TikTok’s and yt vids for a long time merry Christmas to you and tyrell
Mate how do you cope with all them boxes? I used to have festool gear with 20 different boxes. Now I’ve back to Milwaukee with the pack out drawers. Best organisation without a shadow of a doubt. Keep your dewalt but get rid of them stupid boxes.
I have nothing to say really, but I appreciate your content, and wish to help with the yt-algorithms.
you are elite 🫶 thankyou i appreciate you
Worth it's wait in gold..great joiner.
I agree , thankyou for the kind comment
I'm milwaukee man...using mostly festool tools like plunge saw, mitre etc...recommend to you extractor
It always worth spending a bit more on quality tools where you can .. especially your drills , nail gun and mitre saw .. if it makes life easier & improves the quality of the job … buy it .. 👍🏼
I know what your sayin and you could be rite... joiners nowadays could lase up the boots of the craftsmen back in the day that had no power tools. And i have worked with a lot of them
How come you wouldnt go with the dust extractor ive got some of the 54v stuff already was looking towards it in the future
one thing get all the same make check out what you need look up the pros and cons for each range because if you get assorted tools it cost more because extra battery's you need as larger battery's for chop saws can cost £150 + i swapped from 1 make to another after 5 years still got the older ones but leave them at home for jobs there i spent with hand tools around £12 k in the last 2 years but should be ok for the next few years
Your extremely lucky to be in this trade and have such a cheap setup..... because my toolbox without any tools inside was £15000 and I won't even add up the price of my tools just incase I give myself a heart attack
Me to Mate but wouldn't swoop them for anything they have made everything and everyday easyer for sure Carpenters life must have the most tools on any jobs
Nice video , merry Christmas guys
I use paslode nailguns on gas myself and the older ones refuse to shoot quite often when its cold outside
can't wait to get one
@@ttdowgcarpentry2390 for inside they're good tho
Wow, you've got some quality stuff there, I've just bought a tracksaw, how do you cut the rubber off the track though? Also I've got some 76mm cornice to fit, will a 305mm dewalt chop saw cut the 45° mitres alright? Thanks.
great vids mate just subscribed.
Im not sure but i think those tools come in handy😂
😂 I think so too
I’m the same mate, apart from my nail guns are paslode and radio, sds and router are makita.
Don’t forget 20 grand for the van too😂😂😂 it’s ridiculous!
I haven’t bought a table saw stand yet, I made one for now😂
Great video as always mate from a fellow carpenter. I'd like to see a video on your thoughts as to how we raise standards in our trade. So many good tradies around but reputations get tarnished by a few cowboys! Stories I hear from apprentices often make college sound a bit rubbish, so it's dependent on whether we get a good mentor alongside that. How can we improve it?
I went college 5 year bk got my level 3 nvq, it was terrible, learned more labouring
It’s crazy isn’t it bro!!! I’ve just swapped to festool so you can imagine what that’s just cost me!!! Love my kit though and makes my job so much easier
its crazy how much some trades spend but yeah they make the job 1000% easier and better.
@@ttdowgcarpentry2390 when I get out 10 boxes and rails levels and shit to just hang one door people are like wtf!!! But u get what I’m saying bro, I pretty much get my whole van out when I’m kitchen fitting!!!
Wow you just reminded me on my set of dewalt kit how much I’ve spent 👍👍
Worth the investment imo! Have a good xmas
thankyou you too
Good luck for the future! Guess you don't like that dust extractor lol festool dust extractor is better.
Top tools but I have a tip never buy second hand tools but if your looking for discounts on tools check out eBay each month some times powertools mate and other brands have 20% off etc worth checking out if you have a couple of batteries and want to add onto your selection of tools
Paslode nail guns are great worth the cash
It's crazy how much we carpenters spend on tools. You'll spend a lot more yet.
PS Did Liam from Oakwood Garden Rooms teach you how to pronounce architrave? 😉👍
Great Video!
Really curious wot ud pik for ur next laser level and dust extractor
I think all them tools come in very handy 😂
My advice to you is Don't think there are just DeWalt tools out there!!! Plenty of other manufacturers that make better tools/ same level.
nice, how long did you have to train to be a carpenter?
An apprenticeship length which is 4 years.
Do you rate that chip saw ?
Did he show nailguns? If so missed it and should add cost.
You should've become an auctioneer, you sold the tools to the audience 😂
They all cost alot of moneys 💰 but havin all the dearest tools dose not make you a great joinery a £200 chopsaw will make you the same money has an £800 one am at the game over 30 years and was ones the same buyin all the dearest tools but over time i found out that you dont need to be spending big money on something that can break or get nick.... all the best big man keep the video comin
Fact
@Corey Witton started off with a tool bag with a few bits and bobs no power tools. And still got the work done... now we all need vans and millions of pounds of tools... were did it all go wrong lol 😆
It’s very true about an expense tool not necessarily making you any more money. I fit kitchens and have built up some decent kit over the years but definitely agree just because my chop saw cost £500 and my rail saw a similar amount if you give them to someone who doesn’t know or care about fit and finish they are a complete waste of money. A cheap chop saw and a decent blade can definitely get quality results. Most power tools get used for numerous different functions and you can end up with tools that stay in the garage. For example do you need a portable expensive table saw if you own a decent track saw ?
@Tracer 1 aye i think its a look at me and my big van full of dear tools. But every man to his own
Paslodes are elite
Bro is that your house you are living nice
A chippy without a multi on him? Whats that about fella
Short answer : A lot 🤣
I hope you aren’t leaving them on the van mate some fuckers who live close by might looking to ruin a hard working fellas Christmas
1 GBP = 1.2448 USD
1 USD = 0.8033 GBP
Be very careful advertising all your new tools and how much they cost obviously someone is watching you I never lost that many tools now you have a brand new set up be safe
They were stolen a while back sadly
mega capper
You got mugged off for your tools
i agree although some of the tools was brought when new, over time prices have dropped
Tell us where you live 😆
We have 20k worth of festol tools🥹
Makita better pal
@@michaelmcloughlinjr.2447 you wish;)
I used Makita at work every one of them broke and the motors gave out, completely gone off the brand now, Festool good for dust extractors, track saws, plunge routers and small cordless drills.
Makita is good but festool is excellent
I know because I own alot of both