thats fly!!! Technique is amazing Brotha . Good to see the detachable clippers out. Your channel is legit ,You explain what you doing great with detail. Thank you for the content!!
I appreciate the info on the comparison of the 0A blade to an open blade; 000 is like a closed Blade...those are the tidbits i look for and the clippers that one prefers, how the cut and the comfort of the client...so much detail...exciting!
Yoooo this my first time watching your video and I just started really using detachable blades and watching this video just made me want to really better myself using these and I to also started watching Shearfades videos learning to use them but this video is super dope cause I actually felt like I was personally there watching you do this cut I got to see and hear what you were doing now that I’m going to make it my mission to become a better barber 💈🔥💯 PS: I’m a new subscriber now
Very enjoyable and educational video. Nice to see these fades performed with detachable blades. Great job! I use the complete Oster detachable blade clipper system as well. I have the full range of Oster blades and guards. This gives me great flexibility in blade sizes. The “a” blades add the perfect increment to the other Oster clipper blades. As well the Oster plastic guards give an additional increment. Currently I am using the Oster Octane to drive the high quality Oster blades.
SCRAFT BLENDZ I use the Oster brand plastic guards. These guards fit on the detachable metal Oster blades for Octane, Classic 76, Titan etc and Fast Feed adjustable blade(s)very snugly. Some people suggest the Andis magnetic plastic guards but I have found they fit a little loose. The magnets are pretty strong but the plastic guards can fall off. The Oster plastic guards are made of a hard plastic and metal spring loaded clips. This make for a nice tight fit. My only complaint is that sometimes when applying the Oster guards on the Octane, the detachable blade can shift forward slightly. This occurs when applying the plastic guard over the detachable blade while running. This does not occur with the 76 and Titan clippers. This problem is eliminated with a bit of practice and technique however. The plastic guards are available as single sizes or in a pack of 8. One final note: I use the lower number plastic guards #4 - #1 on clients with acute occipital structure (boys and seniors) as I find that by doing so allows for a smoother taper than using bare metal blades alone.
I love the cuts I get with my Oster clippers. Been using them for 30 years. I'm switching it up with Wahl Seniors, just to learn a new clipper protocol. My Osters will never be far from my hand. Enjoyed this tutoriial, thanks and stay blessed.
This was really beneficial for understanding blade sizes to guards. I use detachables in my Arsenal. They clear bulk way faster and cleaner I find. I deff need a few more blades after watching this. Thank you bro. Much love. Keep doing this please 🙌🏻
I've recently started fading with my Supras and I find it easy to skip blades setting in my sections with the flick out motion then coming back with the blade I skipped to take out each line between each section
Bro IMO you blow bossio out the water son! God bless you man. And you got an edge on all the others cause you are a God and Jesus fearing man. Blessing to you bro.
0A is equivalent to Andis Master halfway open...maybe for those cheap Wahl clippers it's the whole blade open. A "1" is the equivalent of Andis Master fully opened.
Wahl lever doesn't open as much as a master or fast feed so you are correct and he is correct. That's why you don't need a 1.5 guard for fast feeds or Masters but you do with the wahm
The Wahl Legends open up much wider than the other Wahl clippers but you are correct about the other Wahl clippers. I was all Wahl for the longest time but I noticed for quite a few years now I gravitated to detachable blades as well as the Oster Fast Feeds.
Have you used the modified oa or is it not worth it? Also I’ve seen you use the andis 2 3/4 blade did you have to modify it for it fit the octanes. Thanks man for the content. I only use octanes so focused on perfecting it.
Bruh this tutorial is legendary🔥. Thank you for comparing this to the wahl gaurd system. It makes sense now. If you can make a tutorial with using detachables to upgrade and come back down with wahl premium gaurds? Or do one side with detachables and other with the wahl gaurds ?
And thank you sir! I’m from the old school of barbers and cutting hair. I learned cutting with Oster 111s and 76s. It’s refreshing to see fades done with detachables nowadays!
Great content, teaching and humility. Thanks bro. Whats a good air brush machine to invest in. ? I'm looking forward to video teaching how to mix the Kiss and alcohol
Nice video 👌🏾 but I feel like the equivalent from the blades to the wahls are a bit off that’s y I’m getting a lil confused sometimes while your explaining. I’m being taught that a ‘1’ blade is a wahl clipper Open. Halfway is the ‘0A’ blade & closed is ‘000’ Like u mentioned. Then ‘1 1/4’ is a wahl half guard closed. Then the “1A” blade is a wahl half guard open. Then ‘1 1/2’ blade is the 1guard open etc etc ...... but The fade down method is something I may need to start trying.
Use these CERAMIC cutting blades www.ebay.com/itm/CL-64445-BARBER-SALON-ANDIS-CLIPPER-DETACHABLE-CERAMIC-EDGE-BLADE-MEDIUM-CUTTER/132360496304?epid=2255440253&hash=item1ed14ce4b0:g:oRkAAOSwpNJZ3r2f:rk:3:pf:0
Just ordered a oster model 10. It comes with a #1 blade and a #000 blade. What blade would be best to order to get that true bald to the skin look. I know some say #00000 but some say #outliner blade. What do you think in best? I like a true bald look with a goatee
@@s.craftblendz730 Use these CERAMIC cutting blades www.ebay.com/itm/CL-64445-BARBER-SALON-ANDIS-CLIPPER-DETACHABLE-CERAMIC-EDGE-BLADE-MEDIUM-CUTTER/132360496304?epid=2255440253&hash=item1ed14ce4b0:g:oRkAAOSwpNJZ3r2f:rk:3:pf:0
Use these CERAMIC cutting blades www.ebay.com/itm/CL-64445-BARBER-SALON-ANDIS-CLIPPER-DETACHABLE-CERAMIC-EDGE-BLADE-MEDIUM-CUTTER/132360496304?epid=2255440253&hash=item1ed14ce4b0:g:oRkAAOSwpNJZ3r2f:rk:3:pf:0
The barbershop I work at only allows detachable blades. Which I feel limits my abilities in a way. Right now I'm using Andis Bgr + love em . I use the Oster Octanes also BUT they are noisey as all hell. Take the same blade and put it on the Andis and Soo quiet.I think for $300 I paid for the Octanes Oster could've should've made the damn things quieter. I'm so done with Oster. Waste of three bills 285 to exact. If you like quieter clippers DONT get the Octanes... Believe me your clients will be happier without that noise in their ears. Lol and so will your co-workers.!! Nice fade by the way.
It really does limit you. A fade with detachable clippers will work on some types of hair, but not all of them. Most types of hair require an adjustable, because you need to be able to get in between blade sizes. Detachable blades also limit the types of fade blends that you can do.
3:51 Great Video! Welcome to what some barbers call the "Dark Side" of barbering (using detachable clippers). I too had issues with the 3 1/2 so I switched to using the 4FC blade. This was originally meant for pets but a local pet groomer told me that her barber/boyfriend made this same switch and noticed more thorough/smooth cuts. To understand this more please see my video on detachable clipper blades th-cam.com/video/MQ2GuAqDDoc/w-d-xo.html
It's not your clippers that miss spots. It's usually the client head and hair type. I cut my own hair and my hair is like his and I notice the same dark spots on my head . Can't get them out for a reason .
One thing to let viewers know is that you can really cut someone's ear bad with detachable blades if you do not fold the ear down. Especially the 1.5 and 2 blade. Because it has very large cutting teeth
SCRAFT BLENDZ that explain why ur skillz soo krispy I been to fl b4 I'ma have to have u put them clippers to work on me when ever I'm back in fl bro 💯👌👍u making the barbers out where I'm at look like rookies what's ur cost on cutts?
The 00000 blade is equivalent to your trimmers, the 000 blade is equivalent to your adjustable clippers all the way closed so it's a 0, the 0A blade is equivalent to your adjustable clippers halfway open so it's a 1/4, the 1 blade is equivalent to your adjustable clippers all the way open so it's a 1/2 like the 1/2 guard on Wahl and the 0 guard on Andis all the way closed, the 1 1/4 blade is equivalent to your 1/2 guard on Wahl and the 0 guard on Andis halfway open so it's 3/4, the 1A blade is equivalent to your 1 guard all the way closed, the 1 1/2 blade is equivalent to your 1 guard halfway open so it's a 1 1/4, the 1 3/4 blade is equivalent to your 1 1/2 guard on Wahl all the way closed and your 1 guard all the way open on Andis, the 2 blade is equivalent to your 2 guard all the way closed, the 2 3/4 is equivalent to your 2 guard all the way open so it's a 2 1/2, the 3 1/2 blade is equivalent to your 3 guard all the way closed, the 3 3/4 blade is equivalent to your 4 guard all the way closed, the 5/8 blade is equivalent to your 5 guard all the way closed and your 3/4 blade is equivalent to your 6 guard all the way closed!
Yes a person that know how to really use detachables and people sleeping on them good job bro and the top line for the TH-cam Barber
I don’t understand how this channel hasn’t blown up yet. Content is 🔥. It’s only a matter of time.
I agree ☝️
This man is talented.
Very clean. I just bought detachable blade clippers and this video is very useful. Thanks.
thats fly!!! Technique is amazing Brotha . Good to see the detachable clippers out. Your channel is legit ,You explain what you doing great with detail. Thank you for the content!!
You're the man, Shannon!Really love your videos.Quality in every aspect!Thanks/Jiannis
I love to see things like this. Its rare u see a barber us a detachable clippers. I love ur work. I would like to see more cuts like this
I saw the video when it disappeared and now we're back.... Good this was awesome sir! Can't wait for the next video with regular clippers! Thanks
Beast of a cut man I love how those detachables work !
I appreciate the info on the comparison of the 0A blade to an open blade; 000 is like a closed Blade...those are the tidbits i look for and the clippers that one prefers, how the cut and the comfort of the client...so much detail...exciting!
Dope cut with detachables man. The taper comes together so nice bro. I need some of them octanes for real!
I am super inspired !!! Just perfect! Thank you!!
Love this. This is probably the reason why I'm getting detachable clipper :)
🙌🏻🙌🏻🙌🏻
Laertes the barber one of the only youtube barbers that mainly uses detachables. Its been becoming a lost art
These tutorials are legit! Thks!
Been using oster octane for a month now love them
I subscribed just because you speak well. Nice cut too. Love detachable blade fades.
Very Helpful video, thank you!
Best barber on TH-cam... no question! Ya'll dont even understand, Im a barber so i know true skills when i see it.
Immaculate work. I need to cop a detachable clipper and blades eventually.
Very nice blend on the fade!
Thank you thank you!! Can't wait to meet you one day, I have been loving your video bro 💪🏾
Great Tut!!! I'm learning a lot!!!
you n bossio are the only barbers i need to watch, y’all are truly the best in the industry
Thank you bro! I appreciate that!!
Yoooo this my first time watching your video and I just started really using detachable blades and watching this video just made me want to really better myself using these and I to also started watching Shearfades videos learning to use them but this video is super dope cause I actually felt like I was personally there watching you do this cut I got to see and hear what you were doing now that I’m going to make it my mission to become a better barber 💈🔥💯
PS: I’m a new subscriber now
Very enjoyable and educational video. Nice to see these fades performed with detachable blades. Great job!
I use the complete Oster detachable blade clipper system as well. I have the full range of Oster blades and guards. This gives me great flexibility in blade sizes. The “a” blades add the perfect increment to the other Oster clipper blades. As well the Oster plastic guards give an additional increment. Currently I am using the Oster Octane to drive the high quality Oster blades.
SCRAFT BLENDZ I use the Oster brand plastic guards. These guards fit on the detachable metal Oster blades for Octane, Classic 76, Titan etc and Fast Feed adjustable blade(s)very snugly. Some people suggest the Andis magnetic plastic guards but I have found they fit a little loose. The magnets are pretty strong but the plastic guards can fall off. The Oster plastic guards are made of a hard plastic and metal spring loaded clips. This make for a nice tight fit. My only complaint is that sometimes when applying the Oster guards on the Octane, the detachable blade can shift forward slightly. This occurs when applying the plastic guard over the detachable blade while running. This does not occur with the 76 and Titan clippers. This problem is eliminated with a bit of practice and technique however. The plastic guards are available as single sizes or in a pack of 8. One final note: I use the lower number plastic guards #4 - #1 on clients with acute occipital structure (boys and seniors) as I find that by doing so allows for a smoother taper than using bare metal blades alone.
Thanks this really helped me!!
Bro you're a true artist... the word barber doesn't cut it for you. You're an incredible "master hair artist!" Damn!
Thank you! I really appreciate that
Bro you worked that out. 💈❤️
Great education on metal blades thank you
Thank you!!
great cut
I love the cuts I get with my Oster clippers. Been using them for 30 years. I'm switching it up with Wahl Seniors, just to learn a new clipper protocol. My Osters will never be far from my hand. Enjoyed this tutoriial, thanks and stay blessed.
I absolutely Love my Octane!
I'm going to try these steps with my osters
Would like to see more of these plz. God bless
Damn good cut with the detachables!!! 👌🏽 Im working on fading with mine also. They give a much much cleaner cut. Nice work!!!!
please see my video on detachable clipper blades th-cam.com/video/MQ2GuAqDDoc/w-d-xo.html
Yo.. your method is so much simplier than most using detachable... Impressive!!!!!!
🙏🏻🙏🏻🙏🏻 appreciate that! Glad it helped
This was really beneficial for understanding blade sizes to guards. I use detachables in my Arsenal. They clear bulk way faster and cleaner I find. I deff need a few more blades after watching this. Thank you bro. Much love. Keep doing this please 🙌🏻
Great cut
GonzoDaBarber thank you 🙏🏼
Nice shadow / temple fade haircut, thanks Steven in Texas
Thank you!! Appreciate that 🙏🏼
You are a master 💈 barber👑👑🌟🌟🏆🏆
Jorge Reyes thank you 🙏🏼
Nice blend
Thanks for explaining how the detachables work, very well explained! got a thumbs up and subscribe from me!
Thank you bro! Appreciate you 🙏🏼
I'm learning to cut hair, so I just subcribed.
Nice 👍
I've recently started fading with my Supras and I find it easy to skip blades setting in my sections with the flick out motion then coming back with the blade I skipped to take out each line between each section
Bro IMO you blow bossio out the water son! God bless you man. And you got an edge on all the others cause you are a God and Jesus fearing man. Blessing to you bro.
Joe V Thanks bro! I appreciate it. God bless 🙏🏼
🔥🔥🔥 beast
Been doing this with my Oster a5 for years
🔥🔥🔥🔥🔥🔥🔥
good eyebrow work
Andis has a 1 taper blade, really works good on the fade, I've been using this technique for 17 years
I’ll definitely have to look into that! Thank you 🙏
Dope. Had so idea u could use detachables and get a dope taper. Only comment would be why not higher taper in the back?
THATS THE WAY TO DO THINGS
Great video! What straight razor are you using here?
0A is equivalent to Andis Master halfway open...maybe for those cheap Wahl clippers it's the whole blade open. A "1" is the equivalent of Andis Master fully opened.
please see my video on detachable clipper blades th-cam.com/video/MQ2GuAqDDoc/w-d-xo.html
Wahl lever doesn't open as much as a master or fast feed so you are correct and he is correct. That's why you don't need a 1.5 guard for fast feeds or Masters but you do with the wahm
Oster or Andis is best. As for Wahl don't waste your money.
The Wahl Legends open up much wider than the other Wahl clippers but you are correct about the other Wahl clippers. I was all Wahl for the longest time but I noticed for quite a few years now I gravitated to detachable blades as well as the Oster Fast Feeds.
Have you used the modified oa or is it not worth it? Also I’ve seen you use the andis 2 3/4 blade did you have to modify it for it fit the octanes. Thanks man for the content. I only use octanes so focused on perfecting it.
Bruh this tutorial is legendary🔥. Thank you for comparing this to the wahl gaurd system. It makes sense now. If you can make a tutorial with using detachables to upgrade and come back down with wahl premium gaurds? Or do one side with detachables and other with the wahl gaurds ?
please see my video on detachable clipper blades th-cam.com/video/MQ2GuAqDDoc/w-d-xo.html
This is a dope ass fade with the detachable blades. Can u do more just like it please?
Thank you 🙏 yes sir
And thank you sir! I’m from the old school of barbers and cutting hair. I learned cutting with Oster 111s and 76s. It’s refreshing to see fades done with detachables nowadays!
efficiency is a beautiful thing man, its worth $60-$80 an hour🤘🏼💈
man you got some serious skills to fade like that with detachables. can you provide a link to shear fades?
Great content, teaching and humility.
Thanks bro.
Whats a good air brush machine to invest in. ? I'm looking forward to video teaching how to mix the Kiss and alcohol
SCRAFT BLENDZ def bro
do the ceramic blades cut shorter than the regular cutting blade?
Nice video 👌🏾 but I feel like the equivalent from the blades to the wahls are a bit off that’s y I’m getting a lil confused sometimes while your explaining. I’m being taught that a ‘1’ blade is a wahl clipper Open. Halfway is the ‘0A’ blade & closed is ‘000’ Like u mentioned. Then ‘1 1/4’ is a wahl half guard closed. Then the “1A” blade is a wahl half guard open. Then ‘1 1/2’ blade is the 1guard open etc etc ...... but The fade down method is something I may need to start trying.
SCRAFT BLENDZ Yeah it does. Thanks for that explanation. You gained another Sub! Look forward to learning more from your personal style of cutting.
What ceramics did you use? I’ve had clients say my blades pull definitely wanna try and switch it up I haven’t used my detachables in a good minute
Use these CERAMIC cutting blades www.ebay.com/itm/CL-64445-BARBER-SALON-ANDIS-CLIPPER-DETACHABLE-CERAMIC-EDGE-BLADE-MEDIUM-CUTTER/132360496304?epid=2255440253&hash=item1ed14ce4b0:g:oRkAAOSwpNJZ3r2f:rk:3:pf:0
I love cutting like this with my supras . My secret is when I take the lines out I drop my speed on my supras by half .
dtp TV really?? That’s dope. I don’t have the supras but I’d like to try that 🙏🏼 thanks
What does dropping the speed do?
@@BarberSense cuts slower, more forgiveness. ESP when tryin to not create another line.
@@notdave17 thank you for answering this question 🙏🏾
Just recently rewatched this one ... what ceramic blades did you use to replace the metal cutting blade ?
Oster fast feed ceramics
Just ordered a oster model 10. It comes with a #1 blade and a #000 blade. What blade would be best to order to get that true bald to the skin look. I know some say #00000 but some say #outliner blade. What do you think in best? I like a true bald look with a goatee
Kenneth Pollard I kind of feel like the 00000 and outliners are the same. But I’m not 100% sure. Just my experience
great cut,what type of ceramic blades are you using with the oster.
@@s.craftblendz730 Use these CERAMIC cutting blades www.ebay.com/itm/CL-64445-BARBER-SALON-ANDIS-CLIPPER-DETACHABLE-CERAMIC-EDGE-BLADE-MEDIUM-CUTTER/132360496304?epid=2255440253&hash=item1ed14ce4b0:g:oRkAAOSwpNJZ3r2f:rk:3:pf:0
Use these CERAMIC cutting blades www.ebay.com/itm/CL-64445-BARBER-SALON-ANDIS-CLIPPER-DETACHABLE-CERAMIC-EDGE-BLADE-MEDIUM-CUTTER/132360496304?epid=2255440253&hash=item1ed14ce4b0:g:oRkAAOSwpNJZ3r2f:rk:3:pf:0
detachable blades come out so much cleaner
I just started using them myself and man when I tell you the cut is much cleaner so you are right about that my brother
Fine work
Do you know where I can buy the detachable blades as a set please let me know ASAP I wanted to learn how to use the detachable blades on the oster 76
Really that’s sucks. It thank you very much I appreciate you Nd that fact that you wrote back
Can you tell me the wich is the number 1 & 2 guard on detachable???
Jaime Navarro the 1a seems to be close to a 1 guard and the 3 1/2 is close to a 2. In my opinion
Can u please do an high afro skin fade either mid or low fade. Please
I’ll definitely see what I can do
@@s.craftblendz730 arite brother. I see nobody has that fade on youtube. I youtube it and hardly anyone i found
do you zero gap any of your blades? thanks
Not the detachables but everything else
What blade do you have on your outliner? Is it modified?
Man I cannot get my cordless outliners to hit.
Can you put the ceramic blade on all the blades.
Do you use the coarse or fine ceramic blades.
The barbershop I work at only allows detachable blades. Which I feel limits my abilities in a way. Right now I'm using Andis Bgr + love em . I use the Oster Octanes also BUT they are noisey as all hell. Take the same blade and put it on the Andis and Soo quiet.I think for $300 I paid for the Octanes Oster could've should've made the damn things quieter. I'm so done with Oster. Waste of three bills 285 to exact. If you like quieter clippers DONT get the Octanes... Believe me your clients will be happier without that noise in their ears. Lol and so will your co-workers.!! Nice fade by the way.
the make yall do razor fades with them to thats crazy
It really does limit you. A fade with detachable clippers will work on some types of hair, but not all of them. Most types of hair require an adjustable, because you need to be able to get in between blade sizes. Detachable blades also limit the types of fade blends that you can do.
please see my video on detachable clipper blades th-cam.com/video/MQ2GuAqDDoc/w-d-xo.html
Are the octanes detachables the same as the Andis bgrc?
Yes they are the same exact blades...I use Oster and Andis bgrc and bgrc + the blades fit them all.
3:51 Great Video! Welcome to what some barbers call the "Dark Side" of barbering (using detachable clippers). I too had issues with the 3 1/2 so I switched to using the 4FC blade. This was originally meant for pets but a local pet groomer told me that her barber/boyfriend made this same switch and noticed more thorough/smooth cuts. To understand this more please see my video on detachable clipper blades th-cam.com/video/MQ2GuAqDDoc/w-d-xo.html
It's not your clippers that miss spots. It's usually the client head and hair type. I cut my own hair and my hair is like his and I notice the same dark spots on my head . Can't get them out for a reason .
One thing to let viewers know is that you can really cut someone's ear bad with detachable blades if you do not fold the ear down. Especially the 1.5 and 2 blade. Because it has very large cutting teeth
Cody the Barber true!
Hi. Where is your location shop? Thanks
Tampa Florida
Can you do a Mohawk with detachable blades? Tag if you can
Yes you can. I’ll try to record one next time I do 👍🏻
Does this fade work on white men does fiber look right on someone white just wondering?
SCRAFT BLENDZ I have dark brown hair
SCRAFT BLENDZ what state u in and how long u been cutting ur clipper game is krispy 💯👍
SCRAFT BLENDZ that explain why ur skillz soo krispy I been to fl b4 I'ma have to have u put them clippers to work on me when ever I'm back in fl bro 💯👌👍u making the barbers out where I'm at look like rookies what's ur cost on cutts?
This is real money!!!$$$$$$$$$ time kill
ahahaha your autofocus goin crazy
Took the blend to high! My opinion. On the right side definitely...
Appreciate your feedback
Instagram?
I don't spray paint, I'm 60 years old school lol
You’re missing out brotha! 😁
The 00000 blade is equivalent to your trimmers, the 000 blade is equivalent to your adjustable clippers all the way closed so it's a 0, the 0A blade is equivalent to your adjustable clippers halfway open so it's a 1/4, the 1 blade is equivalent to your adjustable clippers all the way open so it's a 1/2 like the 1/2 guard on Wahl and the 0 guard on Andis all the way closed, the 1 1/4 blade is equivalent to your 1/2 guard on Wahl and the 0 guard on Andis halfway open so it's 3/4, the 1A blade is equivalent to your 1 guard all the way closed, the 1 1/2 blade is equivalent to your 1 guard halfway open so it's a 1 1/4, the 1 3/4 blade is equivalent to your 1 1/2 guard on Wahl all the way closed and your 1 guard all the way open on Andis, the 2 blade is equivalent to your 2 guard all the way closed, the 2 3/4 is equivalent to your 2 guard all the way open so it's a 2 1/2, the 3 1/2 blade is equivalent to your 3 guard all the way closed, the 3 3/4 blade is equivalent to your 4 guard all the way closed, the 5/8 blade is equivalent to your 5 guard all the way closed and your 3/4 blade is equivalent to your 6 guard all the way closed!
Thanks for the knowledge! 👍🏻😁
You're welcome!
🔥🔥🔥🔥🔥🔥🔥