A video of the attachment setup you have on the GT6000 would be great. Wonder if my Cub Cadet XT1 would handle any of that stuff. Thinking not so much though, but hey never know when I may run across a larger size lawn....err....garden tractor
Looking good!! I had a hydro gear 316 like the two you had in the transaxle shed and pulley swapped it and got going about 10mph on it. I think most hydro are 1:1 pulley ratios, so I went with a 5 inch craftsman mower deck pulley for the engine pulley.
You got a lot done and a lot more to do. TH-cam took my old channel off and never gave me a reason. But right now they seem to be leaving me alone and putting it to everyone else. Hope it works out for you. Don't give up!!!
Organization is for slackers haha. Randomization is awesome, cause it's kool to look for that part you need all day long until you go to the fridge for a cold coke, and hey there's that dang thing, and how or when did it get here? and the best is look what I found, didn't know i bought this kool! The part in the fridge was same part just found unknowingly. UGH I need organized boot camp. Your place looks good, you 2 have put in some work!
I moved the snow blower for my lawn tractor out to the lean-to on the side of the barn for easier access, that was my winter prep...not even sure if I will bother mounting the blower this winter, haven't had enough snow since I bought the dang thing to even bother with it. Where I have it stored now it'll take me maybe 15-20 minutes to install it, probably less because I think I'll go ahead and drop the mower deck off the lawn tractor after I get done mulching the leaves this fall so that its ready to go if I do need the blower which if I do with the deck already removed it'll take maybe 10 minutes to install the blower if that. Dang you find all the good stuff for cheap out on your side of the country. I'd love to get another GT6000, I sure miss mine, the stuff they sell now isn't built anywhere as rugged as that old GT6000. Mine had the 18HP Twin Briggs engine in it....it mowed our 2 acre property for 21 years plus tons of other property chores sadly it didn't have an hour meter on it but I'm sure it had several thousand hours on it when the engine finally decided to part ways with itself....it was running on 1 cylinder after the other one threw a connecting rod, managed to make it back across my field and onto the carport before it gave up completely. Should have kept it and found a replacement engine.
The hydrostatic transaxles have an internal pressure relief that will not allow you to build more pressure than set by factory. You may be able to figure out how to block that off or something. We tried a while ago and it just wasn't worth the time to us.
@@RCGRacing awesome, good to know someone figured out a way. We haven't done alot with mowers lately, but have been rebuilding/redesigning the mower we jumped 18 feet on the side. Not to jump again... but you never know.
on the white yard boss 1855 restore it restore it restore it. they are very rare and worth a lot of money. it is a very cool tractor. and yours is even more rare because it is orange and not white. i would love to see it be restored.
I have an old 1970's dug well. it goes dry on years like this year when we get no rain in September. It very slowly fills with about 50 gallons or so a day. You plan ahead and only take showers as needed. Paper plates and make as few dishes as you can.
Same. Mine was a 2000s Murray Widebody with a small Tecumseh/Peerless hydro with no fan and all the fins covered in mud. Ran it pulley swapped for at least 6 months. I sold the trans after that but it took an insane amount of abuse and it never died. I bumped the engine pulley up to 6" and left the rear stock.
I am in Albany Western Australia and my mower shop in my town is called star sales and service I am 13 years old and I know the men that work there so they let me go in their skip bin to take whatever I want so cool do you know the mower brand Westwood would like to know a lot about that brand
If you tried to get that hydro in the GT to go faster all it would do is trip the bypass in it and it wouldn't go anywhere....but why didn't you put a bigger wheel on the wheelbarrow....err an ag-tire for better traction LOL.
Depends on how much he overdrives it. If he does something like he did on the drag racers than yeah he'll trip it. If he doesn't go crazy on the swap than it should be fine.
Its SO weird To See Comments On you Videos! I Was Hit With That Stupid Minor Protection Thing Too, But Of Course, Im 12. I Think Jessie's Color Was Teal.
If that blue Ford is a sore subject fer ya an ya want er gone I'll find a way to get her. I need a truck to put my madness into. I'ma mechanic, I grew up roun gear heads, if I had a truck, I could do alot.
Hay do you still have the 36 inch deck from that lawn chief
I’d like to see a video on how to repower a tractor with a pressure washer engine
Zachary Raymond I agree I repowered one of my sears suburban with 6hp engine off a pressure washer with a bad pump
Glad you’re cleaning up the property looks amazing keep up the good work
the high/low 3 speed transmission is a peerless 633a and is a very good transmission for offroad use. those transmissions take a lot of abuse.
A video of the attachment setup you have on the GT6000 would be great. Wonder if my Cub Cadet XT1 would handle any of that stuff. Thinking not so much though, but hey never know when I may run across a larger size lawn....err....garden tractor
I see you have a lot of lawn tractors maybe make a tow tractor,that would be a awesome build 😀
Looking good!!
I had a hydro gear 316 like the two you had in the transaxle shed and pulley swapped it and got going about 10mph on it. I think most hydro are 1:1 pulley ratios, so I went with a 5 inch craftsman mower deck pulley for the engine pulley.
i like the transmission shed, im gonna do something similar execpt an engine shed
You got a lot done and a lot more to do. TH-cam took my old channel off and never gave me a reason. But right now they seem to be leaving me alone and putting it to everyone else. Hope it works out for you. Don't give up!!!
Organization is for slackers haha. Randomization is awesome, cause it's kool to look for that part you need all day long until you go to the fridge for a cold coke, and hey there's that dang thing, and how or when did it get here? and the best is look what I found, didn't know i bought this kool! The part in the fridge was same part just found unknowingly. UGH I need organized boot camp. Your place looks good, you 2 have put in some work!
I moved the snow blower for my lawn tractor out to the lean-to on the side of the barn for easier access, that was my winter prep...not even sure if I will bother mounting the blower this winter, haven't had enough snow since I bought the dang thing to even bother with it. Where I have it stored now it'll take me maybe 15-20 minutes to install it, probably less because I think I'll go ahead and drop the mower deck off the lawn tractor after I get done mulching the leaves this fall so that its ready to go if I do need the blower which if I do with the deck already removed it'll take maybe 10 minutes to install the blower if that.
Dang you find all the good stuff for cheap out on your side of the country. I'd love to get another GT6000, I sure miss mine, the stuff they sell now isn't built anywhere as rugged as that old GT6000. Mine had the 18HP Twin Briggs engine in it....it mowed our 2 acre property for 21 years plus tons of other property chores sadly it didn't have an hour meter on it but I'm sure it had several thousand hours on it when the engine finally decided to part ways with itself....it was running on 1 cylinder after the other one threw a connecting rod, managed to make it back across my field and onto the carport before it gave up completely. Should have kept it and found a replacement engine.
The hydrostatic transaxles have an internal pressure relief that will not allow you to build more pressure than set by factory. You may be able to figure out how to block that off or something. We tried a while ago and it just wasn't worth the time to us.
Already solved that in the peerless 316 hydro. Sorting out a few things before I make it public knowledge.
@@RCGRacing awesome, good to know someone figured out a way. We haven't done alot with mowers lately, but have been rebuilding/redesigning the mower we jumped 18 feet on the side. Not to jump again... but you never know.
Harbor freight has deep cycle batteries for solar panels for about $35 I use them in my wheelchair
That is by far the most helpful why did I not think of that comment I have gotten in a long time!!
on the white yard boss 1855 restore it restore it restore it. they are very rare and worth a lot of money. it is a very cool tractor. and yours is even more rare because it is orange and not white. i would love to see it be restored.
I did a pulley swap on a hydro , not much different . It needs internal increase , like carb jets
Whose step side truck is that beside the power wheels
I pulled a 18.5briggs out of a mud puddle . Cleaning it up inside and out and runs just fine . Just need to take it apart and clean it well.
Thanks! Love your videos!
Any tips to fix 83 gt6000 tooth missing from steering selector
You got me i was nervous i can't wait to see hydro mudder and not the norm come back
I would call jessie's color teal
So what exactly happens when your well goes dry? Do you just wait until it rains a lot or what?
I have an old 1970's dug well. it goes dry on years like this year when we get no rain in September. It very slowly fills with about 50 gallons or so a day. You plan ahead and only take showers as needed. Paper plates and make as few dishes as you can.
@@RCGRacing what the info on the old ford
i was like NO NOT THE STANLEY you scared me for a second!
LOL you and about 30 other people! Nah I am curios like you all what is up with the transaxle and if I can fix it.
I like her painting ideas.
How’s your lift doing??
I use it all the time!
The tuff torque hydro in that craftsman is whats is in spinner. Iv be happy with it👍. Yes please make the hydro go fast 🙂. Cool wheelbarrow👍
I have a pulley swapped hydro, it’s a 78 wheel horse it has no issues
Same. Mine was a 2000s Murray Widebody with a small Tecumseh/Peerless hydro with no fan and all the fins covered in mud. Ran it pulley swapped for at least 6 months. I sold the trans after that but it took an insane amount of abuse and it never died. I bumped the engine pulley up to 6" and left the rear stock.
*Always fun rushing to get ready for winter!!*
Agreed!
What would you sell a mst one for I’m needing one maybe two
I'd love to see a "Briggs and Stratton Opposed Twin" repower for a Power/Pressure Washer! As long as the Pump can handle the RPM's!
The oppy has the same 3600 RPM as the original engine so I don't know why that would matter. But it would be a waste of Horse Power and Torque.
I let a briggs engine sit outside with no valve cover gasket, intake, exstaust, or oil dip stick but i put parts back on it and it fired right up
Yup, I wouldn't be at all surprised if that thing fires right up. I have had many many engines that sound just like that and they always fire up.
Good stuff buddy be safe!
Nice dude yard is looking good
i have been having comment problems as well.
i still subscribed , cause i know ya 👀
What's the deal with the blue truck
Looks like a aqua green I have the same color on a wall.in my room see you later young man & lafy
Keep up the good work man
double pressure washer engine rig.
What? No Roper633a Transaxles?!
I am in Albany Western Australia and my mower shop in my town is called star sales and service I am 13 years old and I know the men that work there so they let me go in their skip bin to take whatever I want so cool do you know the mower brand Westwood would like to know a lot about that brand
If you tried to get that hydro in the GT to go faster all it would do is trip the bypass in it and it wouldn't go anywhere....but why didn't you put a bigger wheel on the wheelbarrow....err an ag-tire for better traction LOL.
Depends on how much he overdrives it. If he does something like he did on the drag racers than yeah he'll trip it. If he doesn't go crazy on the swap than it should be fine.
Its SO weird To See Comments On you Videos! I Was Hit With That Stupid Minor Protection Thing Too, But Of Course, Im 12. I Think Jessie's Color Was Teal.
Mintmowers on tiktok if you want to check it out
Hope you figure out how to turn on comments on your other channel
Hey if u wanna sell that lawn cheif I’ll buy it off yah
That color is mint👌👌
If that blue Ford is a sore subject fer ya an ya want er gone I'll find a way to get her. I need a truck to put my madness into. I'ma mechanic, I grew up roun gear heads, if I had a truck, I could do alot.
Says we can't actually comment on your other channel videos you should take thee the power washer pumps and build a water jet
Id put black dots on it make it ice cream
Jessi liked this idea and asked if silver dots count lol
RCG Racing from a distance almost any color would work 😂 but im sure silver would be fine unless she can mix some sorta red or brown into it.
yay comments section
Spin it to moon
Seaweed green
Thats a good one! I will tell her that
It’s an actual crayon that color by crayola