Servicing "unserviceable" Hydro Gear trans axles Cub Cadet Z Force S
ฝัง
- เผยแพร่เมื่อ 18 ก.ค. 2023
- The dealer wouldnt tell me what fluid to use and reccomended doing nothing about my hydros.. I'm glad I did!
Link to hydro fluis I used - www.amazon.com/Stens-Shield-7...
Harbor freight hand pump that worked - www.harborfreight.com/multi-u... - ยานยนต์และพาหนะ
Tech tip for those o ring cap plugs. Take a hammer and a brass punch and smack the plug. It’ll help prevent stripping out the hex plug. Thanks.
Thank you so much for making this video. You are doing a great job. I’m doing this to mine RTZ-S
Thank you for the comment! I'm trying to put out good content. I'm also learning myself! It's nice to know the video helps someone!
How did it go on your RZT-S?
I just bought 1 myself used (little over 200 hours) and am wondering if you should service the transmission
Good video dude..i have an older zforce..had the caps on the transmissions that were like 4 inches long..kinda like a rubber hose sticking up with a plastic thread that got brittle from heat they both broke off..do you know if i can get new caps?..and where do they sell that fluid?
Best bet is ebay. Gonin Google and type your full model number from the mower tag and then find the parts diagram and go by part number.
Jack's small engines or parts tree usually has parts diagrams for everything.
@@LawnZip ok thanks
@@wilE6764 no problem! You may have to use the model number from the hydro itself tok hard saying.. Usually it will show it all on Jack's or parts tree. Hope that helps!
My rzt50 uses 20w50 motor oil in the transmissions, 1.75qts
So is that where the fluid should be, right at the top of the fill hole?
Close yes. It will run out of the overfill if it's over full.
Have u ever thought of drilling and tap the bottom of the case? For draining?
Also how often?
@@froggerman44 I plan to do mine every 100hrs. I'm too scared to drill them lol
how often should the fluid be changed?
I'm not sure since they are "unserviceable" but I'd say about 100 to 150 hrs.
The first change should be the most important. Getting all the gunk and shavings out out from the break in period has to be good for it.
Study gearbox diagram(know where to drill and tap), prevent damage
Just bought a used john deer z445, I am trying to find the diagram for the tranny Tuff Torq TZT 7-D, but I cant find the diagram... I would like to study and drill/tap but where can I find the diagrams?
WELL, THAT REALLY SUCKS!!!!
What part lol?
When the lawn mower over heats did you end up fixing that problem?
@@rubbensmagloire9717 as in the engine? My engine dosent overheat but if yours does I'd suggest you take the shroud off and clean around the engine.
@@LawnZip not the engine the hydro transmission. I thought I saw you comment on another persons video that if it’s humid out after a while you loose power accelerating
@@rubbensmagloire9717 nope the guy I was talking to may of said that. Mine works fine it was just due for a change.