I found what works really well for holding the spur gear is an old 14" nylon dog collar I had laying around. Just wrap it around the gear and then use some channel lock plumbers pliers to pinch it closed around the gear where the pinion gear goes in. This holds it super tight and makes it easy to tighten or remove the nut off of the slipper clutch. Similar to using a strap wrench to remove an automotive oil filter.
thank you for all your infomation, great job, now my turn,, lol,, the transmishion is the hardest, i thank, I did subscribe, and hope to see more, thanks!!!!
Lol but what about the trans goooop!?!? Lol. I highly doubt this truck could handle full submersion.. Traxxas vehicles are pretty much amphibious lol.! The first day I had my UDR Jesse, and I were ploughing through 4 inches of water. hahah!
Bought my honcho a year ago nd drive it daily (not through water) and it is bonestock. Only changed the tires a month ago. Still no issues and is going strong!
You should try the Injora billet aluminum beadwork wheels. They add good weight down low and they are a true beadlock wheel(38 screws per wheel!). Injora makes great products, I use all their stuff on my SCX24 and SCX6. They also make a n8ce dual stage from insert for the SCX6 for around $21 a pair.
After running my SCX6 Honcho for over a year I switched all my plastic over to Vitavon stuff. The only stock parts left is the body, L&R frame rails, ESC and motor, and the front bumper.
@@ProNoobRC Id like to get a SCX6 Wrangler someday and build it with different parts such as Treal. But I didn't buy all that Vitavon at the same time. I pieced it together. Over 5-6 months. I will say that Vitavon parts are like aluminum jewelry and the quality is #1. The swaybar system they have is fantastic.
14:56 Skil makes a 4v twist action driver that is slower speed and torques everything perfect for rc. Best $25 you can spend on these. Pair that with some MIP speed bits... fackin mint bud!
What size thickness is the shim that axial end up put in the axles in the updated version did you measure it to see if it was the same as the .02mm I did not see You measure the included shim would like to know if new version had anything/tolerances changed at all or if they just added a .02mm or .03mm one of my scx6's I had to put .03 in thanks appreciate it
I have the Honcho in my shopping cart, ready to pull the trigger. How do you like the alum axles? Did they help settle the truck a bit with lower cog? Sorry for all the questions. Awesome informative videos!
The aluminum axles are more for rigidity and to keep the ring and pinion mesh tight. Not much weight is added compared to how much the truck weighs overall but yes, I’m sure he does help a little bit but nothing like on the 10 scales. And you should buy that honcho. You will love it. They are complete game changers.. I hate saying it, but 1/6 is soooo much better!
Do you know thye proper part number for the should pins? The book says the p/n is AXI255001 but this is incorrect. I really need shoulder pins but I cannot get them due to the lack of a correct part number!
@@ProNoobRC I would appreciate that. however, I talked to horizon today and they say the issue is that they don't make the part yet and they just recommend that I use regular screws for now..... how long has the Honcho been out?
Why don’t u link the products you upgraded?
I found what works really well for holding the spur gear is an old 14" nylon dog collar I had laying around. Just wrap it around the gear and then use some channel lock plumbers pliers to pinch it closed around the gear where the pinion gear goes in. This holds it super tight and makes it easy to tighten or remove the nut off of the slipper clutch. Similar to using a strap wrench to remove an automotive oil filter.
That’s a great idea!
thank you for all your infomation, great job, now my turn,, lol,, the transmishion is the hardest, i thank, I did subscribe, and hope to see more, thanks!!!!
Nah we just some ugly dudes lol!!
Thank you so much for the video, getting a used scx6 Jeep tomorrow. Keeping my fingers crossed.
You’re gonna love it!!
That is a thickkkk Boi! Almost need a bigger bench for that beastly rig! Looking fantastic bud!
Love this scale!!
Hey sir. That thing is so gorgeous!!! Watching ad I text this. Appreciate you. Have a good weekend!
Man I'd love to own that custom build, it's beautiful an I'd take it everywhere an conquer alot of terrain with it. It would be amazing!
Thanks for the tips and tricks.
Just got mine and looking forward to seeing how it handles in Alberta's winter.
They love the Manitoba snow so you should be good to go!
My Summit ran fully submerged..
Can this truck do the same?
Excellent breakdown!
Lol but what about the trans goooop!?!? Lol. I highly doubt this truck could handle full submersion.. Traxxas vehicles are pretty much amphibious lol.! The first day I had my UDR Jesse, and I were ploughing through 4 inches of water. hahah!
@@ProNoobRC thanks for the insight; gotta make my scale Tundra Buggy for when I'm back in Churchill : )
Bought my honcho a year ago nd drive it daily (not through water) and it is bonestock. Only changed the tires a month ago. Still no issues and is going strong!
Best damn rtr made hands down!! Really nothing needs to be upgraded outa the box. But you know. It helps a bit
You should try the Injora billet aluminum beadwork wheels. They add good weight down low and they are a true beadlock wheel(38 screws per wheel!). Injora makes great products, I use all their stuff on my SCX24 and SCX6. They also make a n8ce dual stage from insert for the SCX6 for around $21 a pair.
Yup! We love Injora parts! Use a ton of them! Great product!
After running my SCX6 Honcho for over a year I switched all my plastic over to Vitavon stuff. The only stock parts left is the body, L&R frame rails, ESC and motor, and the front bumper.
Oh nice!! Would love to but keep buying scx6s lol. I have 3 and Jesse has 1 and another in the works lol.
@@ProNoobRC Id like to get a SCX6 Wrangler someday and build it with different parts such as Treal. But I didn't buy all that Vitavon at the same time. I pieced it together. Over 5-6 months. I will say that Vitavon parts are like aluminum jewelry and the quality is #1. The swaybar system they have is fantastic.
Nice run down and upgrades
Like it all
Thanks brother. I have got some free info now with a booking on the 6 for table work 🙏. We riding tomorrow Sunday 30th
how are those servos holding up long term?
did you put a BEC to them?
The NSDRC servos are direct powered and can’t be beat!
love the tips thanks!
Cheers!
14:56 Skil makes a 4v twist action driver that is slower speed and torques everything perfect for rc. Best $25 you can spend on these. Pair that with some MIP speed bits... fackin mint bud!
What size thickness is the shim that axial end up put in the axles in the updated version did you measure it to see if it was the same as the .02mm I did not see You measure the included shim would like to know if new version had anything/tolerances changed at all or if they just added a .02mm or .03mm one of my scx6's I had to put .03 in thanks appreciate it
Yes .02 it is from axial also. Probably the exact same part since Horizon owns all of the companies now lol
Do you think someone could carefully heat the axle housing and straighten that bend?
Not a chance. Something wouldn’t fit after. Only option is too swap it out unfortunately
@@ProNoobRC Makes sense. It for sure would knock the link mounts out of whack or something.
I come and found this channel helpful how to maintain your rc such like this
I have the Honcho in my shopping cart, ready to pull the trigger. How do you like the alum axles? Did they help settle the truck a bit with lower cog? Sorry for all the questions. Awesome informative videos!
The aluminum axles are more for rigidity and to keep the ring and pinion mesh tight. Not much weight is added compared to how much the truck weighs overall but yes, I’m sure he does help a little bit but nothing like on the 10 scales. And you should buy that honcho. You will love it. They are complete game changers.. I hate saying it, but 1/6 is soooo much better!
@@ProNoobRC it's going to happen very soon! Thanks for the info.
That custom build is ZwEET!!
For the new servo , what website do I find it at..?
nsdrcscaleparts.com/
Here ya go!!
Odd question here... what bit set do you use with the Milwaukee driver?
Hot racing dynamite. Great sets don’t get cheap ones
Thanks bro
Cheers!
How can you get the full torque and speed, from the servo, that is advertised for a 12.6v setup when your 3s battery only produces 11.1v?
12.6 is 3s fully charged and 11.1 is storage voltage. It’s a measurement of cell range.. very confusing
not sure but you had me cracking up, first time watching your channel im following ya!!
Lol cheers!
Do you know thye proper part number for the should pins? The book says the p/n is AXI255001 but this is incorrect. I really need shoulder pins but I cannot get them due to the lack of a correct part number!
For the steering knuckles?
@@ProNoobRC No, the cage hinge for the body, at the back
Oh! I can check first thing in the morning for you when I stop at the shop
@@ProNoobRC I would appreciate that. however, I talked to horizon today and they say the issue is that they don't make the part yet and they just recommend that I use regular screws for now..... how long has the Honcho been out?
Where can I find wheel hub extensions for the scx6 ?
Vitavon wheels have 2 offset choices
Where are the aluminum axles from?
Power hobbies
I really thought the diff housing of scx6 is already made of metal for its price
Eliminator rc advertisement? Are you in Winnipeg by chance?
Yes we are just north in st andrews mb.
Hi😁 what type of greas you use?
Cow rc Udder Butter 🧈
Very nicely explained and technical really appreciate that.
Your friendly
(RET)SSG
Raymond E Tanner
Where can I get the big servo??
nsdrcscaleparts.com/
@@ProNoobRC Oh Thanks !! But I came from germany, it will be an expensive way. But it is a great servo, cause ist works until 16volts
Worth the shipping for sure mate!
I use the same driver and I actually use it more than my Dewalt.
Hit the bell again
Cheers! We found your page and subbed!!
Can this car use 4s?
Yyp
I really want to get into 1/6th scale. I just need to save my money 😅
You will love it!!
Really want the scx6 honcho, but paint body black like my 2016 4x4 tacoma
Ordered a shell to paint black!
I find wd40 or chain cleaner works best in cleaning greasy stuffs
Me likey
First
Hallo I am racing my 2004 Hummer RC crawler 😊😊😊😊
No. No. And no. I like my Honcho just the way it is. I don’t think so. And I like the foams…
Come on! Throw da money at it!!
It at minimum needs foams.? And servo??
2023 alfonsopreciadogonzalez youtuber😊