Its his design: github.com/CloakedWayne/ its still in closed beta though. Archetype belt clamps are actually really good. I've had slipping belts with XOL toolhead b4, but not with Archetype. Maybe your belts have previously been clamped flat. So you need new belts or take 10 min. to create tighter clips.
Hi, like what you did with your trident 👍🔥! Does Mjolnir affect Y or X travel? Got the Mantis toolhead ( with tap) on mine, but I lose a bit of X travel even with ramalama idlers (it's a trident 250).
@@iniqy Ok thanks! I've looked into moving the bed, but space is very limited on a 250. I can defintly lower the front Z motors about 1.5 to 2cm that should help with the z- rod's getting in the way. Anyway, thanks, info on archetype is very hard to find.
@@davidm8293 I'm always happy to help! Did you put the front motors up-side down like me? That should solve the z-rod issue. Check out the armchair discord, there are many people with tridents and archetype there.
@@iniqy Yes discord, I should have checked there! No I haven't even got awd , I do have a lighter x gantry with cnc parts to compensate for tap. I've been thinking about it tho. But the modding just never stops , awd, 48V, then a UHF hotend, cpap for cooling... it goes on and on and on 😅
@@davidm8293 I have also been there. Haven't touched it since this video though. It works so it was time to use it. See my most recent videos if you need inspiration ;)
This video was 60K, maximum I went with ellis speed test was 80K with 2504's at 2A. IIRC My input shaper graphs recommended 25K X and 17K Y with 0% vibr.
Great build
clean machine brother
The AWD looks great. Is that your design or anothers? I'm enjoying the Archetype beta, just wish my belts weren't slipping
Its his design: github.com/CloakedWayne/ its still in closed beta though.
Archetype belt clamps are actually really good. I've had slipping belts with XOL toolhead b4, but not with Archetype. Maybe your belts have previously been clamped flat. So you need new belts or take 10 min. to create tighter clips.
Hi, like what you did with your trident 👍🔥! Does Mjolnir affect Y or X travel? Got the Mantis toolhead ( with tap) on mine, but I lose a bit of X travel even with ramalama idlers (it's a trident 250).
Yes mjolnir likes to touch in the front corners. You can solve loss of space by moving your bed a little to the back.
@@iniqy Ok thanks! I've looked into moving the bed, but space is very limited on a 250. I can defintly lower the front Z motors about 1.5 to 2cm that should help with the z- rod's getting in the way. Anyway, thanks, info on archetype is very hard to find.
@@davidm8293 I'm always happy to help! Did you put the front motors up-side down like me? That should solve the z-rod issue. Check out the armchair discord, there are many people with tridents and archetype there.
@@iniqy Yes discord, I should have checked there! No I haven't even got awd , I do have a lighter x gantry with cnc parts to compensate for tap. I've been thinking about it tho. But the modding just never stops , awd, 48V, then a UHF hotend, cpap for cooling... it goes on and on and on 😅
@@davidm8293 I have also been there. Haven't touched it since this video though. It works so it was time to use it. See my most recent videos if you need inspiration ;)
it looks very good, the tool head stl. maybe you could share it
Thanks, but its not my design. Its Archetype Mjolnir from Armchair Engineering on github.
Which kit did you use?
Siboor
What is the accel you are getting?
This video was 60K, maximum I went with ellis speed test was 80K with 2504's at 2A. IIRC
My input shaper graphs recommended 25K X and 17K Y with 0% vibr.
24v or 48v?@@iniqy
Interesting, max amp for 2504AC is 1.75A. Did you had any issues with the motors?
@@Hajtosek48V. I have 2504AH. So high-temp can definitely go over 2.5A
@@iniqy The value you set in klipper is RMS, the value marked on the motor is max, so the actual max value you can set is 1.75