I am new to this and I haven’t started my project yet and yours was the most educational one that I’ve seen yet regarding the sanding grits and tools I appreciate it
inserting timestamps for my reference when I get back to this video since I finally have all my tools! thank you so much for all your help ☺ 2:10 types of sanders 6:25 sandpaper grit breakdown 8:06 tips for sandpaper grits on furniture 9:00 sanding coffee table & how to hold sander 10:08 switching grits and brief explanation on pig tails 11:55 example of finish not coming off the way it should 13:10 80 grit test 14:08 start timelapse 80 grit 14:40 explanation of cleaning residue to reduce cloudiness 16:05 cleaning with brush 17:28 how to avoid gunky sandpaper 17:50 2nd sanding with 80 grit timelapse 18:14 left v. right side comparison 18:50 second sanding done 19:40 blooper lol 20:15 tips for grits and wood grains for staining 21:48 outro
I'm fairly new to sanding, but got a great tip from another vid- when using cut sheets of sandpaper as you show for the rectangular orbital (palm/"belt") sander, poke holes in the paper so the tool can suck the debris up through the holes on the bottom through to the bag. Makes for much cleaner sanding 😁 I love your video; feels great to see women sharing such knowledge! Looking forward to continue honing my skills. Thank you!
Thank you so much for this video. I am flipping my VERY FIRST PIECE. And I am overwhelmed. I’ve watched so many videos where things look so easy. Then when I do those same things I have stumbling blocks. So I also REALLY appreciate you leaving in all the mishaps. Like the grit, looking for your brush, almost falling over. THIS I can relate to. I feel so much better about going back to my flip. Thanks again.
Well that was class from start to finish! I’ve taken my father in laws big old armchair and I’ve just begun sanding it. Im loving it. So tricky bits to sand on it but fingers crossed I can do it. He was the only one who sat in it so the pressure is on! Thanks for all the tips and advice!
Sometimes I don’t know if my teaching is coming across as well as I think it is so thank you for leaving a comment like this!!! I’m glad you were able to take some useful information from this video. 😁
Was going to buy furniture from ikea but planned out the room and furniture and it was all running about 1k. So I thought why not try my hand at refurbishing pieces I find on Craigslist! Your video is a lifesaver for this new project, thank you!! 😭❤️
Good advice! I tend to wear my hair down in videos just because I try to look more presentable on camera lol I normally have my hair up in a bun when I work.
I was going to mention eye protection. Safety, especially when speaking to "beginners" might be something to keep in mind. Granted, most adults probably don't need to be told this kind of stuff, but if a teen/tween was watching, it would be good advice/reminder to add. And as a suggestion for editing time...perhaps muting while sanding will help save some ears. Some yt'ers will add music or even some commentary in over that, so it's not just silence...but that's it. Great video otherwise. ❤
I enjoyed this I love doing pieces of furniture too. I'm still kinda a rookie lol and yoir video hoped with the numbers on sandpaper alot so tks. Btw how on earth will u be able to do the underlevel on that piece?😮
This is probably the 5th video I watched and the best part is when you said just get a sander and try it. That’s the best way I learn. Research only does so much. Thank you!
I learned a lot from you! Thanks. Doing my first antique office chair. I think I was about to "sand" seal it! Smooth ,,,Glad I saw your video ,Just in time. And NO loud music!
Thank you for your video. I do enjoy watching it. As a beginner, information is important. And your presentation makes me feel like listening to a friend instead of a professor. Thank you.
Thank you this is the 5tg video and FINALLY I GET ONE FOR A BEGINNER !I also had no clue wherethe heck the hose was going to when these guys were doing cabinets !! Now I know it’s a shop vac!
Glad I could help! Yes some people hook up the sanders to Shop Vacs but many professionals use dust extractors. Dust extractors are pretty expensive but are highly recommended because they do perform better and more efficiently than a Shop Vac.
I am trying to start the process of furniture flipping and this video has been so helpful. I did have a question, i know you attached your shopvac to your sander but how did you do that? Did you have to tape the shopvac tube to the existing dust collector end of your ryobi or was it able to screw in? Thank you again for your amazing video and channel it has been so helpful! ❤
I'm so happy you found my channel and it's becoming a good source of information for you! To answer your question....I attached mine not in the best way BUT it worked and it held for 5 years. I simply duct taped one of my Shop Vac attachments to my sander (yikes! not the best way). I now know they make cupplers (little attachments) that will marry your shop vac to your sander. You just need to know the diameter of both your sander and shop vac.
I’ve been holding on to an entire bedroom collection because I’ve been nervous to sand it/repaint it. This really made me feel a lot more confident about starting. Thanks for this video! Subscribing.
Thank you for this video. I want to start flipping some of my own furniture but I have NEVER done anything like this before. I’m super interested and this video is helpful for me to know what tools to get started with.
You are so welcome! You should check out another video of mine of the Top Ten Tools I recommend you get when just starting out with refinishing furniture.
I am a beginner. Your video was extremely informative and thorough. I did not expect to learn as much in detail that I did. You are an exceptional teacher. Thank you so much. By the way, give Biscuit a pet and kiss for me. I adore dogs.🥰 I will be looking forward to watching more of your tutorials!
You are so welcome! Thank you for watching my tutorial and I'm so glad you found it helpful! I'll certainly give little Biscuit a kiss. He now has a brother named Bacon.
You are so welcome! I'm glad you found the video helpful. Sanding can be intimidating. If you have any questions feel free to reach out. I'm happy to help!
Thank you for sharing your knowledge, not taken for granted. I have several pieces that I was going to get rid of, but if I need to replace them, I am unable to get the same qualify at a lower price, so I am going to give the pieces a new life. Intimidated as heck, but you've given me some confidence and thank you again.
I've recently inherited some old pieces of furniture from my MIL and I am planning on restoring them. I'm excited to get started. Thanks for this tutorial, it's helped me understand the sanding grits. I'm def. getting my own shop vac for sure. Helps keep the area clean. Thanks so much. I've subscribed to your channel. Bertha in Texas
HI Beth. When spraying finish you will tend to get those little nubs on the finish. I use a brown paper bag like the kind you get from the grocery store. Use it like sandpaper to knock those nibs off without scratching the finish. Just make sure the finish it completely dry. I love your videos because you are not afraid to pt in the oopsies
This was great. Two weeks ago I bought a random orbital sander and I’ve been afraid to try it because I didn’t know how you know what grit to start with…. How high to go up to, etc. I do have a painted side table was going to practice sanding on but I might try to scrape the paint off first then sand it…. I’m not sure but either way, I’m not afraid to sand anymore. Thanks again.
This was very informational. I'm a beginner and watching videos and learning before i start. I hope to redo my kitchen cabinets myself and few projects around the house i have in mind. Have you done any videos on these?
Glad you found the videos helpful. I have not attempted to paint kitchen cabinets yet. I know prep work is the most important step when painting kitchen cabinets. Most people skip this step or they use paint that claims they don't have to prep the cabinets and that's where the trouble begins.
Thank you so much for your tutorials. You are an excellent teacher. I realize that it is very important to get all of the dust from sanding off of the piece before taking the next steps to finish it, but how do you clean it? Please explain your process to get all of the sanding dust off to ensure a perfectly smooth finish. Thank you
Thanks so much for this...I'm about to start removing the thick dark varnish from the arms,sides and legs of a mid 20th c British made chair I fell in love with. I plan staining it light and low gloss...Got my mouse sander and sandpaper but your vid has been hugely helpful regarding which level of grit to choose. I was quite nervous about my project but I'm much more confident now...Hope I dont mess up. ;)
very, very helpful! i am learning right now, and getting supplies, so i will definitely watch more of your videos! thanks for going through this for us newbies.
Thanks so much for this tutorial. I am new to up cycling furniture. Started during lockdown and I haven't sanded anything yet with an electric sander, but I have a solid oak table where I am thinking of painting the legs, but leaving the top oak. The top is natural I think, but has been waxed previously, so was thinking about tackling sanding it down, before perhaps giving it a deeper stain. Your video was so informative! I actually thought the higher the grit, the more harsh it would be! How wrong was I! Mainly, I have done a bit of hand sanding on old mahogany chairs which I purchased on facebook marketplace for buttons, and I have used annie sloan chalk paints and wax, and reupholstered. The dining table upgrade is a bit more daunting to me, as its a lovely table as it is, but I just want a different look. Your video has given me the confidence to tackle the electric sander. However, I did just purchase only this week a mouse sander from Amazon, and now I'm wishing I had seen your video beforehand as I would have ordered an orbital sander!. I will have to use the mouse for this project as have literally just bought it. Great video, I have subscribed. Many thanks, Nicky
That's wonderful you are wadding into the restoration pool! Beware you may never get out! haha! It's addicting! Regarding your latest project you MUST get an orbital sander. It will make the job less stressful and easier on you. Trust me. I really don't like mouse sanders at all. They can be helpful with detailed sanding that's about it. You can find a relatively cheap orbital sander for around $40-$50. Start with 150 grit. If the finish isn't coming off that easily go rougher and try 120 grit. Best of luck with your new project! Thank you for watching and subbing!
Hi. Can i ask your advice - again!! I am in the middle of restoring a G plan nest of tables. I am going to chalk paint the legs and use polyvine satin and dead flat - 2 coats of satin, one of dead flat. The top, I have sanded down to the bare wood. I would like to use polyvine teak varnish on it, but then wondered whether after I have done this, could I apply some stencilling using annie sloan chalk paint, and then seal it with polyvine satin?? Not sure whether you can add chalk paint on top of the polyvine?? I definitely want my stencil to stay put, but don't want to stencil before I add the teak polyvine varnish as this will discolour the paint I am using for the stencil? Does all this make sense? Thanks in advance xx@@madelinejeanantiquesrestor9074
Getting ready to sand and stain my grandmothers wood chest. I like the explanation of the different types of sand levels. Now I need to find how to apply conditioner and new stain
Just apply wood conditioner with a 2" foam brush and wipe off. Wait 15-20 minutes and then apply your stain. I also use 2" foam brushes to apply stain.
Yeah I should have put my hair all the way up. I do when I'm working. When I film a TH-cam I try to look more presentable. Normally I never wear my hair down while working.
This was very informative and so easy to understand. I really got a good understanding and I great foundation to learn and build on. This video really gave me more confidence to take on my project. I am not to scared at all now.
Hi I’m just starting my first piece a very old china cabinet and your video is so educational I really appreciate you sharing this with all of us new sander’s I just wanted to know we’re I can get the brush that you are using to clean the surface from ? Thank you again for this amazing video I so needed this 👍😊
I've been binge watching refinishing videos all day, this was particularly helpful thanks Madeline. I am doing my first project , a solid maple dining tabletop. It's not that old, maybe 30 years. Any advice before I get started with my 150 grit? I would very much appreciate it! - Suzanne
Hi Suzanne, Thanks for watching my tutorial! Start with the 150 grit if the finish is being stubborn go down to 120 grit. I would higher advise using an orbital sander as well.
I'm so grateful for your reply Madeline . So I don't need to strip. Is there any instance where you would recommend stripping first? .I probably should have asked earlier. Again it is solid maple and has a pretty flat factory finish, not shiny but beat up, some patches stripped to wood. I'm going to do a test run on the leaf but that is actually in very good shape, of course You're a gem for taking the time to reply. I don't want to mess this up. I did watch your stripping video testing Safenol and it appears you might only strip for detailed wood and/or veneers.
Thank you for this video tutorial! I found it very helpful since I am a beginner just doing a diy project with some wooden chairs I have. I have the skil 4 in 1 sander I got at Lowe’s. It’s the one with the dust cup but I didn’t know any better when I just bought it. The issue I am seeing is that it’s not taking off the white paint on the chairs easily with the 80 or even 60 grit, so I am not sure what I am doing wrong other than it just is a timely process and maybe I need to slow down when I sand? I am sanding the base of the chair at the moment and the spindles. Any tips for that I appreciate!
Thanks for watching! To answer your question….Usually when a piece of furniture or chairs are painted, I would advise people to strip the paint off with a stripper before you sand. Otherwise it’ll take you days to sand off paint, and you’re going to go through an enormous amount of sandpaper. I like this aerosol stripper by Klean Strip. I’ll include the link here:
Hi! I was hoping you could tell me what kind of grit sanding do I need for a VOE, non toxic water based paint? I was going to start off with a 80 grit sandpaper (refurbishing crib) to get a lot of scratches off, but what kind of sand paper grit would you recommend so I can start painting? I was going to purchase a spray gun but I need some advice! Your video is so informational for a beginner and I love it!!!
Glad you are enjoying my videos. Is the crib painted now? Are you removing paint or just sanding a crib first? If you are just sanding a crib with NO PAINT prior on it I would start with 120 grit to get scratches out. 80 might be too rough. Then I would move up to 150 grit. In between paint coats I use a fine sand paper (400-500 grit) and I lightly feather sand by hand inbetween coats.
Hi. I'm teaching myself how to sand and refinish furniture, loved the video very informative ...I collect antiques and I have a table and needs refinishing ,so time to learn lol. I'm not sure of the type of wood it is .you was saying bout the different type of wood with the sanding and staining. Needing to know more bout those two!??
That's just a preference left up to you. I like preserving beautiful natural wood. I don't' like painting a piece of furniture 100%. I'm a big fan of the two toned look. Half paint, half stain.
This was the best video for someone who has never touched an orbital sander (and now a proud owner of one)! By the way, have you ever used sample paint(the kind in a 15 oz. can) on furniture? I'm wondering what to do with the 3-4 sample cans that I have. Thanks!
I love hearing that this video helped you! I do use sample paint quite often. Valspar has little samples around 8 oz. I always keep mine around for touch up work or use them on small furniture pieces.
Buying an orbital sander now! I had a Wen sander that’s similar to the mouse that you have.. it’s starting to vibrate in a funky way and I can see a light through the holes and it looks like a spark 😳Since I like all my body parts intact, I’m replacing it 😆So thank you so much for this! Definitely the best video I’ve found in this subject! As are most of your videos! Thanks again!
Yes definitely get yourself an orbital sander! Mouse sanders are eh. You can find a decent orbital sander for around $40-$50. I love hearing that you are getting good information from watching my videos. Thanks for watching and commenting!
Very helpful! I just bought a small oak bookcase that I'm going to refinish. While sanding it today I'm getting what looks like water marks on the top. Maybe I should lower the grid?? Going to try that.
Great videos. Keep up the good work. Thank you for Sandpaper 101 video. Question: Do you have any recommendations for sanding the edge of the table or a routered edge? Thanks.
Thanks for your video...I'm trying to finish a small piece. I really thought it would be easier. I think sometimes we have a project (unfinished) in our heads, and we don't know the end process until the one prior...and before you know it, you change it. 😁
You are very welcome! Ahhh yes restoring furniture is definitely not for the faint of heart. It is hard work. Trust me I get it. I think that a simple end table will take me no time to transform and then POW! issue after issue after issue comes up. I have also had some of the most beautiful outcomes come out of accidents or being redirected because of an issue. If you embrace the creative journey of being able to go with the flow it helps.
I normally use Pre-Stain wood conditioner by Minwax. Keep in mind there are wood conditioners that are oil based and wood conditioners that are water based.
Legs can be tricky. Some legs you can use an electric sander. Depends on the width of the leg. For legs I use a couple of hand held gadgets to sand. www.amazon.com/gp/product/B073B2X3PX/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B073B2X3PX&linkCode=as2&tag=madelinejeana-20&linkId=584aaeeb882ab5cbcccce7efcdff4d48 www.amazon.com/gp/product/B001NPDK9Y/ref=as_li_tl?ie=UTF8&tag=madelinejeana-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B001NPDK9Y&linkId=f817268eebbf8e9a4a303b41e3130a09
Would you be kind enough to add the video in the link about using/attaching the shop vac hose to the sander? I can’t seem to find that video. Thank you
Love the info u provided I want to learn how to do this. Question...what about the legs of a table..do they get sanded? That seems very difficult to do..your thoughts.. thank u again
Glad you liked the video. Yes legs need to be sanded and there's a few options you can try. If the legs are relatively square or flat just try an orbital sander or a brushless sander (flat more rectangular in shape). Some legs can be difficult if they are round and more intricate. Then you need to hand sand them and that's time consuming.
Bosch makes a 5” and 6” direct drive orbital sander that is below half the price on the festool rotex and both of those sanders are the backbone in my cabinet shop. You might want to look into that Bosch for striping and smoothing. Works as well as the rotex for $250 instead of $600 something.
Since this video was created I now have the Festool MIDI Dust Extractor. It's AMAZING! Big investment but so worth it. Thank you for your suggestion though.
I would recommend stripping with a wood finish stripper like citristrip or Greenez Furniture stripper. This way you dont have to worry about getting the varnish/finish off when sanding. I am doing this with my first piece right now. A family member of mine who has refinished some of his tables has said it makes it easier for both you and keeps you from having to sand off too much of the wood. I'm just watching this video so I know where to start with my grit and when to switch. ^_^ she explains that part very well
True. Piece of furniture with a thicker original varnish I would recommend stripping or scrapping the finish off a bit. It does make it easier to sand.
Wish i had seen this before i did my table. I sanded the whole thing with 220 after stripping it. So now I'm wondering... do i go over it with a lower grit ? Or is it ruined? I have no idea what kind of wood it is unfortunately
Do people use drimmels for tiny projects like a rocking chair to get between the slits ? My granddaddy made a rocking chair with tiny strips of wood and i need something small to get between probably 100 stips
Yes a dremmel might be your best friend for this type of sanding. Check out this dremmel sanding kit. It has various drum sizes and the corresponding sanding sleeves (along with different grits) that go over them. amzn.to/3SArLPZ
Dear ohh dear Madeline! Thank you so much for all the teaching videos! My soul clicked with yours when I've heard that you used to live in Mn, me too. The weather there was a challenge there for projects like that. Then You said that you are renting so I knew that you are my girl. I'm learning from you a lot, work in progress. May I ask you for advice, pls? I'm actually in an apartment situation, recently become a single mom with a disabled child, with no support. I've been thinking about returning to the restoration business, but how to keep it quiet and clean in the apartment? How to keep it clean I've learned from you!! THANK YOU Now I need to buy a low budget and low noise shop vac. Do you have any advice on this, Madeline? Thank you!!
Small world!!! Where in Minnesota? I grew up in Anoka County. I tip my single mom hat to you. Balancing motherhood and working is honestly my biggest challenge. Renting and trying to do this business adds another level of frustration. I used to rent a condo and they would make me REMOVE my magnetic signs on my car that detailed my business name. Every time I entered the complex I had to remove them. It was crazy! I also had a busy body neighbor (retired 60 something) woman who would report me ALL THE TIME to the association because I did what I did for work. She didn't complain of noise, she just didn't like that I worked from home. I wasn't sanding much during that rental, mostly 100% painting pieces. My next rental I was there for 5 years but it was a single house. So I sanded all the time, all hours of the night. I didn't have to worry about neighbors. Shop Vacs, unfortunately, are noisy and so are sanders. I wish I could recommend quiet ones. The one purchase that has cut down on the noise is now I have a Festool dust extractor. It's much quieter than my shop vac. I did a a tutorial/review not too long ago on the dust extractor. You should watch that tutorial and see how the noise compares to a shop vac. Last September I bought a house and it's made my work life hundred times better. Yeaaa! Full basement I can work in and do whatever/whenever I want. You could just paint pieces with occasional sanding until your next move. That's what I would advise until you find more flexible housing.
@@madelinejeanantiquesrestor9074I already love you like a sister! CONGRATULATIONS on buying the house. I'm so crazy happy for you! Single mom that bought a house for her children!! You are amazing! I lived in Shakopee, where the Valley Fair is. What City did you live in Anoka? Thank you for the advice. I will watch the video and will do my best to make money for that. For now, I will just do my best with what I have . God bless you 🙏. I will stay in touch with you!!
@@iwonajung6565 Awe! Thank you so much! I thought the housing market was crazy last summer when I was looking. Just in the last year it seems like the market has gone absolutely buzzerk! By the grace of God we found a house that has a beautiful yard, a full basement, three bedrooms two full baths…it’s unbelievably nice and affordable. I feel for people who are trying to find an affordable rental or who are trying to purchase a home in this market it is nearly impossible, at least in my region. I went to St. Francis High School. Don’t know if you’re familiar with St. Francis. It was a small town when I grew up there. I’ve heard it’s really built up now. I definitely know where Shakopee is and good ole’ Valley Fair. That’s a staple amusement park for every school field trip I swear haha! Well you keep plugging away at refinishing furniture and if you have any questions please reach out to me anytime I am more than happy to help you! You can message me on my business Facebook page. You can find me at Madeline Jean Antiques and Restoration.
I’d prefer to not use chemicals if I can help it. Mainly the smell and the mess. I’d rather sand the finish off. There are exceptions to this, especially if I’m refinishing a 100+ year old piece and it’s veneer. I’ll then strip with acetone as to not ruin the veneer.
You want a dust system. You are breathing the fine particles your vac without a separater is releasing into the air. Have a look at the Oneida Dust Deputy Cyclone Separator. Its under $100 on Amazon and works great. You can use your existing vac. Hope this helps.
I want to try repainting a wood dresser...I know it needs to be sanded first...why can’t I just buy/use a sanding attachment to a drill that I own? Is it necessary to actually purchase a sander? I plan on doing it in my garage, with the door up, and wear an N95. Thank you in advance for your answer!! :)
I don't think you would get the same results as an orbital sander. A Ryobi orbital sander is $35-$40. Well worth it in my opinion. I still have mine after 6 years.
First time watching your videos and I love them. The only thing I would suggest to think about is your sanding speed @9:30. Think like you are sanding a long strip. You start with a new pad and if you are going very slow by the time you are half way of the strip the sandpaper is worn and by the time you reach the end of the strip, the sandpaper is gone. So you are going to end up with an uneven surface. If you move the sander a bit faster and multiple passes (back and forth) your surface is going to have a better finish.
I incorrectly stated the palm sander was a belt sander. My mistake. Just noting it in the comments for clarification.
Love the video , im interested in starting this as i side hustle, i love this i hop i see more of your videos very informative. Thanks for sharing
*Works really **MyBest.Tools** well, and fits hand perfectly.*
I am new to this and I haven’t started my project yet and yours was the most educational one that I’ve seen yet regarding the sanding grits and tools I appreciate it
OH YEAAAAAA! I love hearing my video helped you. If you have any questions as you begin your project reach out I'm happy to help.
Yessss!! I found this V educational. Starting from ground zero here
@@jenniferbarrow5358 I’m happy to hear you found this video helpful and easy to understand. 😊
Girrrl I bought a sander!!! I used to b intimidated. TFS
Yes finally some help FOR A BEGINNER!!
inserting timestamps for my reference when I get back to this video since I finally have all my tools! thank you so much for all your help ☺
2:10 types of sanders
6:25 sandpaper grit breakdown
8:06 tips for sandpaper grits on furniture
9:00 sanding coffee table & how to hold sander
10:08 switching grits and brief explanation on pig tails
11:55 example of finish not coming off the way it should
13:10 80 grit test
14:08 start timelapse 80 grit
14:40 explanation of cleaning residue to reduce cloudiness
16:05 cleaning with brush
17:28 how to avoid gunky sandpaper
17:50 2nd sanding with 80 grit timelapse
18:14 left v. right side comparison
18:50 second sanding done
19:40 blooper lol
20:15 tips for grits and wood grains for staining
21:48 outro
Anytime! If you have any further questions. Let me know. Happy to help!
@Kimberly Thank you very much for taking time and putting this together. Bravo, 👍🏻
Thank you so much! I just got dining room chairs and am scared poop less to start. This has really helped.
I'm fairly new to sanding, but got a great tip from another vid- when using cut sheets of sandpaper as you show for the rectangular orbital (palm/"belt") sander, poke holes in the paper so the tool can suck the debris up through the holes on the bottom through to the bag. Makes for much cleaner sanding 😁 I love your video; feels great to see women sharing such knowledge! Looking forward to continue honing my skills. Thank you!
Great advice!!! Thank you for sharing such a great and useful tip!
Thank you so much for this video. I am flipping my VERY FIRST PIECE. And I am overwhelmed. I’ve watched so many videos where things look so easy. Then when I do those same things I have stumbling blocks. So I also REALLY appreciate you leaving in all the mishaps. Like the grit, looking for your brush, almost falling over. THIS I can relate to. I feel so much better about going back to my flip. Thanks again.
Well that was class from start to finish! I’ve taken my father in laws big old armchair and I’ve just begun sanding it. Im loving it. So tricky bits to sand on it but fingers crossed I can do it. He was the only one who sat in it so the pressure is on! Thanks for all the tips and advice!
So glad you found this video helpful! Best of luck with your project.
I wish I would’ve looked for you before I started sanding... for the first time 🤦🏻♀️ You explain this all SO WELL THANK YOU!!!
Sometimes I don’t know if my teaching is coming across as well as I think it is so thank you for leaving a comment like this!!! I’m glad you were able to take some useful information from this video. 😁
Was going to buy furniture from ikea but planned out the room and furniture and it was all running about 1k. So I thought why not try my hand at refurbishing pieces I find on Craigslist! Your video is a lifesaver for this new project, thank you!! 😭❤️
That is awesome! I love hearing stories like this!
I have been a novice furniture refinisher for years. I love this video. It really filled in some knowledge gaps. Thanks!
Glad you found this video helpful!
Please make sure to pull your hair up when doing this too!! Your hair can get caught in power tools and that can be dangerous
Good advice! I tend to wear my hair down in videos just because I try to look more presentable on camera lol I normally have my hair up in a bun when I work.
Hi how long does it take to sand on that table
I was going to mention eye protection. Safety, especially when speaking to "beginners" might be something to keep in mind. Granted, most adults probably don't need to be told this kind of stuff, but if a teen/tween was watching, it would be good advice/reminder to add.
And as a suggestion for editing time...perhaps muting while sanding will help save some ears. Some yt'ers will add music or even some commentary in over that, so it's not just silence...but that's it. Great video otherwise. ❤
I enjoyed this I love doing pieces of furniture too. I'm still kinda a rookie lol and yoir video hoped with the numbers on sandpaper alot so tks. Btw how on earth will u be able to do the underlevel on that piece?😮
This is probably the 5th video I watched and the best part is when you said just get a sander and try it. That’s the best way I learn. Research only does so much. Thank you!
Glad you enjoyed it! Thanks for watching the video and commenting.
I learned a lot from you! Thanks. Doing my first antique office chair. I think I was about to "sand" seal it! Smooth ,,,Glad I saw your video ,Just in time. And NO loud music!
Glad I could help!
Thank you for your video. I do enjoy watching it. As a beginner, information is important. And your presentation makes me feel like listening to a friend instead of a professor. Thank you.
You're very welcome! I love hearing this!
Thank you this is the 5tg video and FINALLY I GET ONE FOR A BEGINNER !I also had no clue wherethe heck the hose was going to when these guys were doing cabinets !!
Now I know it’s a shop vac!
Glad I could help! Yes some people hook up the sanders to Shop Vacs but many professionals use dust extractors. Dust extractors are pretty expensive but are highly recommended because they do perform better and more efficiently than a Shop Vac.
I am trying to start the process of furniture flipping and this video has been so helpful. I did have a question, i know you attached your shopvac to your sander but how did you do that? Did you have to tape the shopvac tube to the existing dust collector end of your ryobi or was it able to screw in?
Thank you again for your amazing video and channel it has been so helpful! ❤
I'm so happy you found my channel and it's becoming a good source of information for you! To answer your question....I attached mine not in the best way BUT it worked and it held for 5 years. I simply duct taped one of my Shop Vac attachments to my sander (yikes! not the best way). I now know they make cupplers (little attachments) that will marry your shop vac to your sander. You just need to know the diameter of both your sander and shop vac.
I’ve been holding on to an entire bedroom collection because I’ve been nervous to sand it/repaint it. This really made me feel a lot more confident about starting. Thanks for this video! Subscribing.
Glad I could help! Best of luck with your DIY bedroom makeover. You got this!
Awesome presentation on how to use sanders and the sand paper grid! Appreciate this!
Thank you for this video. I want to start flipping some of my own furniture but I have NEVER done anything like this before. I’m super interested and this video is helpful for me to know what tools to get started with.
You are so welcome! You should check out another video of mine of the Top Ten Tools I recommend you get when just starting out with refinishing furniture.
I am a beginner. Your video was extremely informative and thorough. I did not expect to learn as much in detail that I did. You are an exceptional teacher. Thank you so much. By the way, give Biscuit a pet and kiss for me. I adore dogs.🥰 I will be looking forward to watching more of your tutorials!
You are so welcome! Thank you for watching my tutorial and I'm so glad you found it helpful! I'll certainly give little Biscuit a kiss. He now has a brother named Bacon.
I love your clear explanations. You deserve more likes!
Glad you think so!
I appreciate you. I have always wanted to do this but felt unqualified to do anything but polish it. 😁 Thank you for giving me more confidence.
You are so welcome! I'm glad you found the video helpful. Sanding can be intimidating. If you have any questions feel free to reach out. I'm happy to help!
Great, this video is exactly what I needed to see. I am intimidated by trying to do this. Thank you!
You can do it!
Perfect for me as a new learner !
Wonderful! Glad it was helpful!
Thank you for explaining sand paper grit and demonstrating. I’m doing my kitchen cabinets. 😊🙏🏼
You are so welcome! Glad you found the video helpful.
Great job … I learned so much from watching this video so thank you
You are so welcome!
Thank you for sharing your knowledge, not taken for granted. I have several pieces that I was going to get rid of, but if I need to replace them, I am unable to get the same qualify at a lower price, so I am going to give the pieces a new life. Intimidated as heck, but you've given me some confidence and thank you again.
Wonderful! I hope you have started some of those projects. Would love to hear if you have.
I've recently inherited some old pieces of furniture from my MIL and I am planning on restoring them. I'm excited to get started. Thanks for this tutorial, it's helped me understand the sanding grits. I'm def. getting my own shop vac for sure. Helps keep the area clean. Thanks so much. I've subscribed to your channel. Bertha in Texas
Thanks for subscribing! Best of luck with your projects. If you have any further question feel free to reach out.
HI Beth. When spraying finish you will tend to get those little nubs on the finish. I use a brown paper bag like the kind you get from the grocery store. Use it like sandpaper to knock those nibs off without scratching the finish. Just make sure the finish it completely dry. I love your videos because you are not afraid to pt in the oopsies
This was great. Two weeks ago I bought a random orbital sander and I’ve been afraid to try it because I didn’t know how you know what grit to start with…. How high to go up to, etc. I do have a painted side table was going to practice sanding on but I might try to scrape the paint off first then sand it…. I’m not sure but either way, I’m not afraid to sand anymore. Thanks again.
YEEEEAAAA! I'm so glad to hear you aren't afraid to dive in now with sanding. Once you get over the first time jitters you will be fine.
Thank you! This is a great tutorial! Very informative. I could use the help. I’m beginning to get interested and doing projects.
Glad it was helpful! Thanks for watching!
This was very informational. I'm a beginner and watching videos and learning before i start. I hope to redo my kitchen cabinets myself and few projects around the house i have in mind. Have you done any videos on these?
Glad you found the videos helpful. I have not attempted to paint kitchen cabinets yet. I know prep work is the most important step when painting kitchen cabinets. Most people skip this step or they use paint that claims they don't have to prep the cabinets and that's where the trouble begins.
Thank you so much for your tutorials. You are an excellent teacher.
I realize that it is very important to get all of the dust from sanding off of the piece before taking the next steps to finish it, but how do you clean it? Please explain your process to get all of the sanding dust off to ensure a perfectly smooth finish. Thank you
Thanks so much for this...I'm about to start removing the thick dark varnish from the arms,sides and legs of a mid 20th c British made chair I fell in love with. I plan staining it light and low gloss...Got my mouse sander and sandpaper but your vid has been hugely helpful regarding which level of grit to choose. I was quite nervous about my project but I'm much more confident now...Hope I dont mess up. ;)
So glad you enjoyed the video! How's your project coming along?
Such an amazing, informative and entertaining video. So much of your explanation helped. Thx
Glad you enjoyed it and learned from the video. Thanks for watching!
This is so educational
Thank you for watching!
great video Madeline! Learned a lot.
@@Alby1979 That’s wonderful! Thank you for watching!
This is EXACTLY what I needed! Thank you!
You're so welcome! Glad it helped!
very, very helpful! i am learning right now, and getting supplies, so i will definitely watch more of your videos! thanks for going through this for us newbies.
You are so welcome! I'm glad my videos are being helpful and I hope you subscribed.
Loved your video! You seem like an awesome person. I appreciate how much effort you are giving to help us newbies.
Thank you for checking out my videos! Is there any other methods I can help with? I'm always looking for more ideas for videos.
You just made me get a sander. Well done. Thank you for the confidence
Glad I could help! I was so hesitant when I first was learning to sand. I'm happy this video is helping others like yourself.
Thank you, answered questions I didn't know I was going to have down the road! Subscribed!
Thank you for subscribing!
great info here. Thank you. I was getting nervous about your hair coming pretty close to the rotary mechanism on your orbital sander.
You are right I should have pulled my hair completely up. I normally do when I'm working.
I’m just starting out and really appreciated this video (as an absolute beginner) you are awesome! Love your hair 🖤
Glad it was helpful! Thank you for watching and commenting and liking my hair!
Thanks so much for this tutorial. I am new to up cycling furniture. Started during lockdown and I haven't sanded anything yet with an electric sander, but I have a solid oak table where I am thinking of painting the legs, but leaving the top oak. The top is natural I think, but has been waxed previously, so was thinking about tackling sanding it down, before perhaps giving it a deeper stain. Your video was so informative! I actually thought the higher the grit, the more harsh it would be! How wrong was I! Mainly, I have done a bit of hand sanding on old mahogany chairs which I purchased on facebook marketplace for buttons, and I have used annie sloan chalk paints and wax, and reupholstered. The dining table upgrade is a bit more daunting to me, as its a lovely table as it is, but I just want a different look. Your video has given me the confidence to tackle the electric sander. However, I did just purchase only this week a mouse sander from Amazon, and now I'm wishing I had seen your video beforehand as I would have ordered an orbital sander!. I will have to use the mouse for this project as have literally just bought it. Great video, I have subscribed. Many thanks, Nicky
That's wonderful you are wadding into the restoration pool! Beware you may never get out! haha! It's addicting! Regarding your latest project you MUST get an orbital sander. It will make the job less stressful and easier on you. Trust me. I really don't like mouse sanders at all. They can be helpful with detailed sanding that's about it. You can find a relatively cheap orbital sander for around $40-$50. Start with 150 grit. If the finish isn't coming off that easily go rougher and try 120 grit. Best of luck with your new project! Thank you for watching and subbing!
MANY THANKS FOR THE TIPS XX@@madelinejeanantiquesrestor9074
Hi. Can i ask your advice - again!! I am in the middle of restoring a G plan nest of tables. I am going to chalk paint the legs and use polyvine satin and dead flat - 2 coats of satin, one of dead flat. The top, I have sanded down to the bare wood. I would like to use polyvine teak varnish on it, but then wondered whether after I have done this, could I apply some stencilling using annie sloan chalk paint, and then seal it with polyvine satin?? Not sure whether you can add chalk paint on top of the polyvine?? I definitely want my stencil to stay put, but don't want to stencil before I add the teak polyvine varnish as this will discolour the paint I am using for the stencil? Does all this make sense? Thanks in advance xx@@madelinejeanantiquesrestor9074
Thanks again very informative and well explained !
Glad it was helpful!
Great video, now I will get started!
You can do it!
Thank you so much for this! It’s great information to have
You are so welcome!
Thanks for the helpful advice
Happy to help
This is excellent. Thank you.
Glad you enjoyed it!
Delightful video and very helpful for us newbies :)
Glad it was helpful!
Getting ready to sand and stain my grandmothers wood chest. I like the explanation of the different types of sand levels. Now I need to find how to apply conditioner and new stain
Just apply wood conditioner with a 2" foam brush and wipe off. Wait 15-20 minutes and then apply your stain. I also use 2" foam brushes to apply stain.
Great video lesson. I am just preparing to sand my first piece. I was so afraid the sander was going to grab your hair!
Yeah I should have put my hair all the way up. I do when I'm working. When I film a TH-cam I try to look more presentable. Normally I never wear my hair down while working.
Thank you! Well done and informative beginner's (me) guide :)
You're very welcome! Glad you enjoyed it!
I tried watching a handful of videos. Yours was great! Exactly what I was needing! Thanks!
This was very informative and so easy to understand. I really got a good understanding and I great foundation to learn and build on. This video really gave me more confidence to take on my project. I am not to scared at all now.
I'm so glad! You got this! I once was totally scared to hold and operate a sander. Now it's like breathing to me haha!
Hi I’m just starting my first piece a very old china cabinet and your video is so educational I really appreciate you sharing this with all of us new sander’s I just wanted to know we’re I can get the brush that you are using to clean the surface from ? Thank you again for this amazing video I so needed this 👍😊
Excellent tutorial Thankyou so much 🙏🥰
Glad it was helpful!
Thank you sooooo much! You’re Amazing!!!
You're so welcome!
Thank you SOOOO much!!
Learned alot!!
You're very welcome! Glad it helped!
I've been binge watching refinishing videos all day, this was particularly helpful thanks Madeline. I am doing my first project , a solid maple dining tabletop. It's not that old, maybe 30 years. Any advice before I get started with my 150 grit? I would very much appreciate it! - Suzanne
Hi Suzanne,
Thanks for watching my tutorial! Start with the 150 grit if the finish is being stubborn go down to 120 grit. I would higher advise using an orbital sander as well.
I'm so grateful for your reply Madeline . So I don't need to strip. Is there any instance where you would recommend stripping first? .I probably should have asked earlier. Again it is solid maple and has a pretty flat factory finish, not shiny but beat up, some patches stripped to wood. I'm going to do a test run on the leaf but that is actually in very good shape, of course You're a gem for taking the time to reply. I don't want to mess this up. I did watch your stripping video testing Safenol and it appears you might only strip for detailed wood and/or veneers.
Great video very interesting thanks
Glad you enjoyed it!
I'm a bigger, thank you. Great information, I learned important basic inf. Going to try a farmhouse table and chairs. 😊
Wonderful! Glad this video was helpful!
Thank you for this video tutorial! I found it very helpful since I am a beginner just doing a diy project with some wooden chairs I have. I have the skil 4 in 1 sander I got at Lowe’s. It’s the one with the dust cup but I didn’t know any better when I just bought it. The issue I am seeing is that it’s not taking off the white paint on the chairs easily with the 80 or even 60 grit, so I am not sure what I am doing wrong other than it just is a timely process and maybe I need to slow down when I sand? I am sanding the base of the chair at the moment and the spindles. Any tips for that I appreciate!
Thanks for watching! To answer your question….Usually when a piece of furniture or chairs are painted, I would advise people to strip the paint off with a stripper before you sand. Otherwise it’ll take you days to sand off paint, and you’re going to go through an enormous amount of sandpaper. I like this aerosol stripper by Klean Strip. I’ll include the link here:
@@madelinejeanantiquesrestor9074
You are a saint! Thank you for replying to me with yet another helpful tip! 😊
This looks so medatative to do! Cant wait to do a project!
Sanding is very therapeutic for me!
Hi! I was hoping you could tell me what kind of grit sanding do I need for a VOE, non toxic water based paint? I was going to start off with a 80 grit sandpaper (refurbishing crib) to get a lot of scratches off, but what kind of sand paper grit would you recommend so I can start painting? I was going to purchase a spray gun but I need some advice! Your video is so informational for a beginner and I love it!!!
Glad you are enjoying my videos. Is the crib painted now? Are you removing paint or just sanding a crib first? If you are just sanding a crib with NO PAINT prior on it I would start with 120 grit to get scratches out. 80 might be too rough. Then I would move up to 150 grit. In between paint coats I use a fine sand paper (400-500 grit) and I lightly feather sand by hand inbetween coats.
Working on my very first piece. Video was very informative. Thank you!
I’m so glad you found the video helpful!
Hi. I'm teaching myself how to sand and refinish furniture, loved the video very informative ...I collect antiques and I have a table and needs refinishing ,so time to learn lol. I'm not sure of the type of wood it is .you was saying bout the different type of wood with the sanding and staining. Needing to know more bout those two!??
Thank you! Went to ur Facebook site loved ur beautiful work!
Awesome! Thank you! I appreciate you following me here on TH-cam and on Facebook!
I am definitely going to try attaching my orbital sander to the shop vac, thanks!! Have you used it with a cushioned pad for curves?
Best of luck! I have not used cushioned sanding pads for curves. Usually that takes a special sander.
Excellent video, about to start 1st sanding job. How you decide whether to stain or paint afterwards?
That's just a preference left up to you. I like preserving beautiful natural wood. I don't' like painting a piece of furniture 100%. I'm a big fan of the two toned look. Half paint, half stain.
I have a wood lathe and I will def be watching more sanding veidos lmao.. I’m pretty new to sanding wood.. lol
I'm constantly learning. I'm finding with woodworking and furniture it's an evolving craft.
@@madelinejeanantiquesrestor9074 most definitely is… I never thought I would get into it… but here I am so be ready for the questions lol
This was the best video for someone who has never touched an orbital sander (and now a proud owner of one)! By the way, have you ever used sample paint(the kind in a 15 oz. can) on furniture? I'm wondering what to do with the 3-4 sample cans that I have. Thanks!
I love hearing that this video helped you! I do use sample paint quite often. Valspar has little samples around 8 oz. I always keep mine around for touch up work or use them on small furniture pieces.
Buying an orbital sander now! I had a Wen sander that’s similar to the mouse that you have.. it’s starting to vibrate in a funky way and I can see a light through the holes and it looks like a spark 😳Since I like all my body parts intact, I’m replacing it 😆So thank you so much for this! Definitely the best video I’ve found in this subject! As are most of your videos! Thanks again!
Yes definitely get yourself an orbital sander! Mouse sanders are eh. You can find a decent orbital sander for around $40-$50. I love hearing that you are getting good information from watching my videos. Thanks for watching and commenting!
Very helpful! I just bought a small oak bookcase that I'm going to refinish. While sanding it today I'm getting what looks like water marks on the top. Maybe I should lower the grid?? Going to try that.
Good luck! Let me know if it helped. Sometimes old stains go deep into the wood and can't be removed even with the best sanding job.
Great video! thanks
You’re so welcome!
You have the most helpful videos!!! Thank youuu
Glad you like them! Thank you for commenting!
Thank you for this!!
You are very welcome!
Great videos. Keep up the good work. Thank you for Sandpaper 101 video. Question: Do you have any recommendations for sanding the edge of the table or a routered edge? Thanks.
I usually have to hand sand curved edges. There are some soft conforming sandpaper pads out there that work well.
Thanks for your video...I'm trying to finish a small piece. I really thought it would be easier. I think sometimes we have a project (unfinished) in our heads, and we don't know the end process until the one prior...and before you know it, you change it. 😁
You are very welcome! Ahhh yes restoring furniture is definitely not for the faint of heart. It is hard work. Trust me I get it. I think that a simple end table will take me no time to transform and then POW! issue after issue after issue comes up. I have also had some of the most beautiful outcomes come out of accidents or being redirected because of an issue. If you embrace the creative journey of being able to go with the flow it helps.
Thanks for this starter video
Please share what some of the products you use to condition/oil wood before you stain. TIA also great video!!
I normally use Pre-Stain wood conditioner by Minwax. Keep in mind there are wood conditioners that are oil based and wood conditioners that are water based.
Brilliant! thank you! Can you let me know what do you use to sand the small parts of the furniture like for example legs?
Legs can be tricky. Some legs you can use an electric sander. Depends on the width of the leg. For legs I use a couple of hand held gadgets to sand.
www.amazon.com/gp/product/B073B2X3PX/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B073B2X3PX&linkCode=as2&tag=madelinejeana-20&linkId=584aaeeb882ab5cbcccce7efcdff4d48
www.amazon.com/gp/product/B001NPDK9Y/ref=as_li_tl?ie=UTF8&tag=madelinejeana-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B001NPDK9Y&linkId=f817268eebbf8e9a4a303b41e3130a09
Would you be kind enough to add the video in the link about using/attaching the shop vac hose to the sander? I can’t seem to find that video. Thank you
Love the info u provided
I want to learn how to do this. Question...what about the legs of a table..do they get sanded? That seems very difficult to do..your thoughts.. thank u again
Glad you liked the video. Yes legs need to be sanded and there's a few options you can try. If the legs are relatively square or flat just try an orbital sander or a brushless sander (flat more rectangular in shape). Some legs can be difficult if they are round and more intricate. Then you need to hand sand them and that's time consuming.
Thanks u made my life easy
Whoo hoo!!! I always strive to work smarter not harder.
Bosch makes a 5” and 6” direct drive orbital sander that is below half the price on the festool rotex and both of those sanders are the backbone in my cabinet shop. You might want to look into that Bosch for striping and smoothing. Works as well as the rotex for $250 instead of $600 something.
Since this video was created I now have the Festool MIDI Dust Extractor. It's AMAZING! Big investment but so worth it. Thank you for your suggestion though.
Great help ! Mark in Melboune australia 🇦🇺
Hello all the way from New Hampshire! Thanks for watching mate!
I would recommend stripping with a wood finish stripper like citristrip or Greenez Furniture stripper. This way you dont have to worry about getting the varnish/finish off when sanding. I am doing this with my first piece right now. A family member of mine who has refinished some of his tables has said it makes it easier for both you and keeps you from having to sand off too much of the wood. I'm just watching this video so I know where to start with my grit and when to switch. ^_^ she explains that part very well
True. Piece of furniture with a thicker original varnish I would recommend stripping or scrapping the finish off a bit. It does make it easier to sand.
Which grit should you use for scuff sanding on a factory sealed pine piece?
I would start with 150 grit and move accordingly. If the finish is being stubborn move to a lower grit like 120.
Wish i had seen this before i did my table.
I sanded the whole thing with 220 after stripping it.
So now I'm wondering... do i go over it with a lower grit ? Or is it ruined? I have no idea what kind of wood it is unfortunately
Really helpful!!
Glad it was helpful!
Thanks for sharing your experience, great video!
Thank you for liking this tutorial!
Do people use drimmels for tiny projects like a rocking chair to get between the slits ? My granddaddy made a rocking chair with tiny strips of wood and i need something small to get between probably 100 stips
Yes a dremmel might be your best friend for this type of sanding. Check out this dremmel sanding kit. It has various drum sizes and the corresponding sanding sleeves (along with different grits) that go over them.
amzn.to/3SArLPZ
I was wondering if you had any tips Movers put a dent in my antique grandfather clock and I’m not sure how to fill it back in and make it look natural
I would use Mohawk refinishing products. They are superior when it comes to refinishing furniture.
Dear ohh dear Madeline! Thank you so much for all the teaching videos! My soul clicked with yours when I've heard that you used to live in Mn, me too. The weather there was a challenge there for projects like that. Then You said that you are renting so I knew that you are my girl. I'm learning from you a lot, work in progress. May I ask you for advice, pls? I'm actually in an apartment situation, recently become a single mom with a disabled child, with no support. I've been thinking about returning to the restoration business, but how to keep it quiet and clean in the apartment?
How to keep it clean I've learned from you!! THANK YOU
Now I need to buy a low budget and low noise shop vac. Do you have any advice on this, Madeline? Thank you!!
Small world!!! Where in Minnesota? I grew up in Anoka County. I tip my single mom hat to you. Balancing motherhood and working is honestly my biggest challenge. Renting and trying to do this business adds another level of frustration. I used to rent a condo and they would make me REMOVE my magnetic signs on my car that detailed my business name. Every time I entered the complex I had to remove them. It was crazy! I also had a busy body neighbor (retired 60 something) woman who would report me ALL THE TIME to the association because I did what I did for work. She didn't complain of noise, she just didn't like that I worked from home. I wasn't sanding much during that rental, mostly 100% painting pieces. My next rental I was there for 5 years but it was a single house. So I sanded all the time, all hours of the night. I didn't have to worry about neighbors. Shop Vacs, unfortunately, are noisy and so are sanders. I wish I could recommend quiet ones. The one purchase that has cut down on the noise is now I have a Festool dust extractor. It's much quieter than my shop vac. I did a a tutorial/review not too long ago on the dust extractor. You should watch that tutorial and see how the noise compares to a shop vac. Last September I bought a house and it's made my work life hundred times better. Yeaaa! Full basement I can work in and do whatever/whenever I want. You could just paint pieces with occasional sanding until your next move. That's what I would advise until you find more flexible housing.
@@madelinejeanantiquesrestor9074I already love you like a sister! CONGRATULATIONS on buying the house. I'm so crazy happy for you! Single mom that bought a house for her children!! You are amazing!
I lived in Shakopee, where the Valley Fair is. What City did you live in Anoka?
Thank you for the advice. I will watch the video and will do my best to make money for that. For now, I will just do my best with what I have . God bless you 🙏. I will stay in touch with you!!
@@iwonajung6565 Awe! Thank you so much! I thought the housing market was crazy last summer when I was looking. Just in the last year it seems like the market has gone absolutely buzzerk! By the grace of God we found a house that has a beautiful yard, a full basement, three bedrooms two full baths…it’s unbelievably nice and affordable. I feel for people who are trying to find an affordable rental or who are trying to purchase a home in this market it is nearly impossible, at least in my region. I went to St. Francis High School. Don’t know if you’re familiar with St. Francis. It was a small town when I grew up there. I’ve heard it’s really built up now. I definitely know where Shakopee is and good ole’ Valley Fair. That’s a staple amusement park for every school field trip I swear haha! Well you keep plugging away at refinishing furniture and if you have any questions please reach out to me anytime I am more than happy to help you!
You can message me on my business Facebook page. You can find me at Madeline Jean Antiques and Restoration.
Hi, I'm curious as to why you sand it first instead of using a stripper to remove the finish?
Thank you.
I’d prefer to not use chemicals if I can help it. Mainly the smell and the mess. I’d rather sand the finish off. There are exceptions to this, especially if I’m refinishing a 100+ year old piece and it’s veneer. I’ll then strip with acetone as to not ruin the veneer.
Thank you.@@madelinejeanantiquesrestor9074
You want a dust system. You are breathing the fine particles your vac without a separater is releasing into the air. Have a look at the Oneida Dust Deputy Cyclone Separator. Its under $100 on Amazon and works great. You can use your existing vac. Hope this helps.
Good advice! Since this video I have upgraded to a Festool dust extractor system. It's amazing!!!!
I want to try repainting a wood dresser...I know it needs to be sanded first...why can’t I just buy/use a sanding attachment to a drill that I own? Is it necessary to actually purchase a sander?
I plan on doing it in my garage, with the door up, and wear an N95.
Thank you in advance for your answer!! :)
I just noticed you also have a Chihuahua!
I don't think you would get the same results as an orbital sander. A Ryobi orbital sander is $35-$40. Well worth it in my opinion. I still have mine after 6 years.
I love my little Biscuit! He's 5 pounds and he's absolutely spoiled rotten!
First time watching your videos and I love them. The only thing I would suggest to think about is your sanding speed @9:30. Think like you are sanding a long strip. You start with a new pad and if you are going very slow by the time you are half way of the strip the sandpaper is worn and by the time you reach the end of the strip, the sandpaper is gone. So you are going to end up with an uneven surface. If you move the sander a bit faster and multiple passes (back and forth) your surface is going to have a better finish.