I made this project and it was not working, the motor would spin even withut the switch pin. I stuck LED with resistor for debugging and found that it gets fixed if you add a resistor in series with the diode
I have the starter kit and I tried to build it but it didn't work. The battery and motor work fine separately but if i connect the battery and the motor together it doesn't work.
Check your code, mine turned out to be as simple an issue as having a single = as opposed to an == for the if statement. I hope this helps or you have figured out your problem.
This did not work, I wired as shown in the video and used the code from the library. what is wrong? Battery information: ALKAINE 6LR61 9V VARTA
I made this project and it was not working, the motor would spin even withut the switch pin. I stuck LED with resistor for debugging and found that it gets fixed if you add a resistor in series with the diode
What is the voltage required for 2 motors like that??????
I still don’t understand how the diode helps with the currect created by the motor, could you explain where the extra currect goes?
Nowhere, because of diode. Its purpose is to prevent this extra current goes back to circuit. I think so at least.
I have a problem when the motor is On, controller reset .
I follow exactly for the entire setup and codes but it just doesn't work. I suspect my mosfet is faulty :(
I have the starter kit and I tried to build it but it didn't work. The battery and motor work fine separately but if i connect the battery and the motor together it doesn't work.
If I don't have a diode can I use a LED instead?
does the LED support 6V/9V?
Most LEDs uses 3 volts
my motor spins regardless of the push button being pressed or not. Why is this happening?
Check your code, mine turned out to be as simple an issue as having a single = as opposed to an == for the if statement. I hope this helps or you have figured out your problem.
The issue could also be with the diode. I added a resistor in series with the diode and it worked
I did everything and it doesn't work
i also did everything and it doesn't work
I did everything and it doesn't work its weird cuz nothings wrong so it should work
How can I get starter KIT in india ?
Google brings up Roboindia as having it. They're stating Rs 1,999 down from Rs4,000. Amazon.in are saying currently unavailable,
You didn't give much information about MOSFET for a safe operation.
its IRF520
Strictly unable to make that stuff work, unwire and rewire at least 5 times. Rewrite the code 10 times, It won't spin.
It literally took me two days to figure out; I did not install the common ground wire.
Hey, but you figured it out, and learned something that'll be useful in literally every project you make in the future! I'd call that a success!
Damm been a whole year