Laser Cleaning Smoke and Soot from a very old wooden painted door without removing the white paint
ฝัง
- เผยแพร่เมื่อ 4 ส.ค. 2020
- LaserAge LaserAge.eu was established as a supplier of Laser Cleaning Systems and Laser Solutions to industry.
Laser Cleaning
Laser Cleaning is simply a beam of light, with no electrical interference, aimed at a piece of metal. No air pressure, no chemicals or abrasive consumables are used during this process of removing rust, oxide layers, weathering residues, paint and contaminates from surfaces with little or no impact to the original surface. Since no particles are propelled through a beam delivery system, there is little or no noise during the process and no mess to clean up afterwards. This process gently removes the contaminant material without harming the underlying substrate and can be performed wet or dry.
Laser Cleaning is well suited to a wide range of industries, which includes such widely differing organisations such as: Aerospace, Automotive, Bake, Conservation & Restoration, Construction, Energy, Engineering, Government, Manufacturing & Fabrication, Marine, Medical, Tooling & Mould, Nuclear, Pharmaceutical, Print and Flexographic, and Transportation.
Laser Cleaning is ideal for removing micro-scale to large-scale cleaning of a large number of contaminants ranging from; post-weld oxide layers, rust, carbon from baking tray, adhesives, varnish, oil, grease, smoke damaged equipment, paint, ink and mould release agents- to name but a few of the materials we remove daily using this process.
As there are no cleaning agents, all of the removed material can be collected with a light vacuum and the whole process is extremely clean and portable. This makes the system highly suitable for industries that require a high degree of hygiene - the food and electronics industries for example or working in confined spaces.
Remember with laser cleaning there is:
• NO masking,
• NO chemicals,
• NO abrasive consumable,
• NO blast cabinets
• NO grinding wheels,
• NO noise,
• NO dry ice blasting and best of all
• NO mess to clean up afterwards.
• Running costs
o Low power is €1-2/hr
o High power is €5-10/hr
If there is merit in applying this process, in a manner that is environmental friendly, affordable, cheap to run, portable and requires minimal training, then laser cleaning ought to be considered as a substitutional or complementary method of cleaning.
Contact info@laserage.eu - วิทยาศาสตร์และเทคโนโลยี
![[UNCUT]"เศรษฐา" โดนบีบให้ลาออก เผยดีลลับ "ทักษิณ" ต้องต่อโปร ไม่งั้นเจอจุดจบ! I คนดังนั่งเคลียร์](http://i.ytimg.com/vi/XlH3k81dxmE/mqdefault.jpg)
I have visions of cleaning my house like this. Then the garage, the garden shed and all other structures on the property.
Kids will love this Laser.
Wow is this a real thing?! Laser cleaning is the future!
Just imagine, twenty years from now we’ll able to rent these...or purchase them outright...at the local hardware store...
Its a Class 4 laser so won't be available to the general public. Having said that, you can already get them if you look hard enough. What you do with the laser is your business. We have one here as a going concern, €59,000
@@laserlips101 Possible to use this to clean boat hulls..?
@@laserlips101 china made or europe?
@@ankualex europe, Belgium
@@efesair4336 If its a steel boat, yes.
I never knew the beam got that wide on that little P laser, hugely impressive
If a longer focal length lens existed, then we could go wider !
its only soot but yes, can go up to >200mm
I’m a heavy smoker, can I clean out my lungs with this?
No but obviously you could vlean uour walls and doors 🤣
actually you can, but I'm not sure if you gonna survive that.....
You can only do it once, then you'll never need to do it again.
Wow, super impressive...:)
Is that 200 watts pulse or continuous ??
Thank you
Would you say there is a demand for this in the USA?
Can you share what model you're using please?
Are you selling the actual machine or you're just demonstrating how it works.
I am seriously considering buying a laser cleaner.
I wonder if you could clean a wood burnjng stove with it
Do these machines need regular costly maintenance?
What watts is that machine?
Great work indeed what is that sort of machine are you using there may I ask? What's the name of that machine called interested to know?
This is a laser. Basically you point and press the trigger. A laser beam litterally zaps the soot off, gentle enough to run up and down your hand without any damage, yet strong enough to remove soot, rust, paint, general contaminants graffiti, etc..
laser cleaning machine
Can you adjust the wattage so it won't burn the wood? Also can you change the shape from a line to a circle or a oval?
you can change the shape to anything you wnat, as long as it fits under the working envelop of the beam, i.e., 150 x 150mm for the short focal length lens.
Anyone wondering what happened to that place. Looks like a fire but not perfectly sure.
Beats the hell out of nitromors, shame they're a bit on the expensive side!.
It is the ideal device to remove soot from old church picture, walls, sculptures I think and saving the original colour. I suppose it depends on the injustment of the laser.
Price please ..can thiss deliver in good condition to india..warranty garrenty if any ..please share.
Cek harga??
I've never found pricing on that bad boy. Can I ask what it cost?
The Compact costs £68,000. We have other for much less. it depends on what you wnat to use it for and where you are located. BEst regards Leo
What's wrong with water and a cloth?
Hmmm...
I've seen videos of laser cleaning removing paint from concrete.
How come white paint doesn't get removed from wood? Was it because it was white.
-
I would think using this type of cleaning would be very good for old furniture restoration. Would it work and in what cases?
No more chemicals...
i think that machine have multi setting.. rust and paint use high setting..
Darker colours are easier to remove. that is more of a guide than a rule. Its the same principle that in hot countries, all houses and cars are painted white, while in colder countries, oka you don't see too many black houses but plenty of black cars ! have you ever see a black BMW whiz thro the Sahara Desert or downtown Dubai ?
@@laserlips101 Depends on the specific situation. For clothing, black clothing is actually better in hot sunny climates and that is why Arab people use black robes and head coverings because it keeps them cooler than white would (opposite of what you would think I know). For building surfaces which retain heat, it is always white. They even paint mountain rocks/tops white to cool down the air and make it rain in countries like Peru (no joke).
yes
anyone know how much price to get this devil machine?
Starting from about $20,000,
More than 10,000 dollars is enough
How about removal for other colors like red, blue, white ?
it depends on the chemistry of the paint
Typically, white paint reflects laser beams instead of absorbing them, and therefore, it is not removed during laser cleaning. In contrast, if the door were brown, the paint would likely be absorbed by the laser and subsequently be removed. A similar principle applies to car primers, where the efficacy of laser removal may depend on its color and absorptive properties.
It can be tuned.
I don´t get it, it removes rust and paint and bondo and whatever off a car, but this white paint stays on ?
Simple the paint reflects the beam. There are no absorption coefficients in the paint and hence the transverse wave length of the Laser is not absorbed and simply reflects off the paint. Elementary my dear Watson
Works good on paint, how about roaches, spiders and other pests?
Price can I get it in india
Price please!!
50K
65000 €
А вонь удаляет???
Hope you have house insurance incase it caused fire,lol
a wet rag and some dish soap can could do that
Absolutely correct. but its going to take a lot of rags and some pretty strong industrial chemicals because the normal stuff is not strong enough. Then there is the smell - that has tobbe neutralised.
@@laserlips101Its a niche market glad its working out for you, Does laser power make for better cleaning? I know it would clean faster but would making the comparison of 100 psi and 1000 psi preasure washer=100W and 1000W Laser be correct? are there some surfaces that will only be cleaned with the 1000 or 500 watt power levels, or could you do the same quality/level cleaning with a lower 50/100 watt laser be achieved with just more passes?
65000 €
Whr can I purchase this.in india
Now who's going to clean the smoke from this thing?