How to change your chain case oil in a 850 gen 4 etec skidoo
ฝัง
- เผยแพร่เมื่อ 2 ส.ค. 2024
- How to change your chain case oil in a 850 gen 4 etec skidoo
This video is a full inspections as well if you would want to change just the oil you would have to remove the drain plug and then voila!
Amazon.com USA (Ski-doo Gear)
LinQ Medium Tunnel Bag: amzn.to/2W6HlET
LinQ Jerry Can: amzn.to/2T2W3el
Stackable LinQ Fuel Caddy: amzn.to/2FJfGUQ
HANDLEBAR MUFFS: amzn.to/2T1vypr
Drive Belt: amzn.to/2MkTcux
2019 X-Fleece Men's Charcoal Grey: amzn.to/2MkTgdL
Gear Backpack: amzn.to/2W5Oqpa
Modular Electric SE Helmet: amzn.to/2VXtW1U
Amazon.ca CANADA (Ski-doo Gear)
LinQ Medium Tunnel Bag: amzn.to/2RURvt7
LinQ Jerry Can: amzn.to/2T5z5TO
Shock Protector: amzn.to/2szcoMh
Tunnel Backpack: amzn.to/2DnHuMX
LinQ Cargo Base Kit: amzn.to/2sD2BVr
Drive Belt: amzn.to/2W4EpJ6
Snowmobile Cover: amzn.to/2syfRKV
Thanks for watching guys! Make sure to support the channel by subscribing! See you in the next one! - กีฬา
Can't believe it's that easy!!!
There is now a drain plug. The drain plug and the fill to level plug are the same size. For the chain tension, I just tighten by hand then back it off a bit. Done.
New to Skidoo this year. Glad i found you guys on TH-cam!! You have very informative videos. I just bought the 2020 Backcountry Xrs 850 with Shot. I also have the Titan helmet with electric goggles,have you guys ever thought of doing a video on installing the port for the electric goggles? Keep up the great videos!!!
Awsome enjoi these fun mschines
If it were my sled I would have tightened the chain tension a little bit. Otherwise awesome vid!
VelocitySCTR I agree, the chain is loose, plus when tightening the pin is designed to stay in....
Well done. Thanks
Thank you
Hello do you have the same kind of video but for clean the exhaust valve on a 850 etec???
I noticed your coolant level looks low in the coolant container.How full should it be.
legend
Hi, I have a problem on my 2012 600ace skidoo.
There is a loud grinding noise when I put the gear in reverse. When I back up, it slams and disengages with the noise of the pinion rubbing.
Do you have any idea where it could come from?
Thank you so much 🙏
Will you be doing an install video for the ski doo LED light on this sled
No i will not be
Hi I am in a pinch what antifreeze do you run in these gen 4s?
dexcool
ta pas suivie les spec de tork et la sequence de serrage pour les bolt du chain case
how many k should we be doing this?
5000 around
have you ever changed the spark plugs?
No
is there a new gasket that needs to be reapplied?
thanks
Not
No
You’re actually suppose to leave the cotter pin in when adjusting the chain tension. It purpose it to prevent the tension bolt from backing out .
I just saved you a few minutes of hassle
I was just wondering if you do not remove the pin you cannot tight or loosen the tensioner So how were you getting around that to tighten your tensioner
Some sleds have the pin in the hole through the adjuster (my ‘21 does) which prevents the adjuster bolt from loosening. My wife’s ‘23 has the pin in the recess of the adjuster bolt. That allows adjustment without removing the pin but will not prevent the adjuster from backing out over time. Both 600r engines. Not sure why the discrepancy. I like the pin through the hole like my older sleds were.
Do you use synthetic oil or mineral?
The brp synthetic oil
@@4SeasonBros thank you.
Your welcome
it is not necessary to unscrew the temperature sensor, it has a connector on the electrical cable
Ok good to know
Video of changing plugs
Will do a video shortly, thanks
you should really take a good look at your chain. spin your track and look at all the links. make sure they arent broken. otherwise you are on a ticking timebomb